Beruflich Dokumente
Kultur Dokumente
A to E
.............................................................................................................................................1 AAA Master Format For: Cheat Sheets..........................................................................2 Add Delivery to an Existing Shipment....................................................................................3 Adding Favorites to the SAP Menu........................................................................................4 Adding a Part to a Delivery....................................................................................................7 Airport Codes.........................................................................................................................8 ...........................................................................................................................................8 Bill of Material Views............................................................................................................9 Change Address on a Single Delivery..............................................................................11 Change Freight Payment Terms (Prepaid or Collect).........................................................12 Change Print Output Condition (Printer or # of Copies)...................................................13 Change Quantity on a Delivery............................................................................................14 Change Delivery - Reference to Outside Delivery VL02N.................................................17 Charge Material to a Work Orders or Excess & Obsolete...................................................19 Check Open Deliveries........................................................................................................20 Check Outbound ASN Status..............................................................................................21 Check Incoming EDI (EMFOR).........................................................................................22 Correcting an Under Pick after Scanning............................................................................24 Correct Over Shipment : ZOVR...........................................................................................25 Correct Under Shipment: ZUND ........................................................................................25 Correcting A Shipment after Bill of Lading has Printed......................................................26 Create a Delivery................................................................................................................29 Create A Miscellaneous Delivery and Shipment ................................................................30 Create a Shipment...............................................................................................................37 Create Delivery - Scrap Sale VL01N or VL10..................................................................38 Create a Delivery and Shipment to a Sub Contractor.........................................................40 Cum Discrepancy Report : Scheduling Agreements.........................................................42 Delete Shipment and Delivery.............................................................................................43 Delivery - Picking - Manually............................................................................................44 Display Engineering: Open Orders VA05..........................................................................45 Display Engineering: Open Orders VL10.........................................................................46 DRAFT Send Release to a Supplier DRAFT............................................................47 Duns No. to Plant Code Reference --- ZDUNS_XREF......................................................49
Rich Erickson
62471785.doc
Page 1
Cheat Sheets
Click on the Pack material tab Click Click select all (far right side of screen) trash can, delete (far right side of screen)
Change the delivery quantity Click Click on Click to automatically pack save
Rich Erickson
62471785.doc
Page 2
Scroll down and type your delivery number in "Outbound deliveries" box Click on the Clock icon Click on your delivery number at bottom of the screen and drag it to the top of the screen Click on the Overview icon Re-click all original buttons Click save button (ie. Planning, Registration, Loading start, Loading end)
If the pick list was already printed for the original delivery, you must demand print the pick list for the new delivery.
Rich Erickson
62471785.doc
Page 3
A quick and easy way to add favorites is by 1. Clicking once on the Favorites Title in the SAP menu. Then right click on your mouse. This selection will appear: .
Tip: The alternative way to perform this function is by selecting the SAP menu path Favorites Add. 2. Select the option for Insert transaction. This dialog box will appear.
or press <Enter>.
Rich Erickson
62471785.doc
Page 4
The transaction with the title text will appear under the Favorites menu path.
Rich Erickson
62471785.doc
Page 5
Note: Other tasks can be performed by clicking once on the transaction to highlight it and right clicking on your mouse. For example: Delete Favorites allows you to delete the transaction from the favorites menu. Insert folder allows you to insert a blank folder into the favorites menu. 4. The system task is complete. Click the to return to the initial screen.
Rich Erickson
62471785.doc
Page 6
Click on Outbound Delivery>Deliver sales order Click drop down box next to Order Type in Part Number (with suffix) in Material Number field Click Double click on desired Purchase order Click Double check delivery quantity brought over
Click on the Pack material tab Click Click select all (far right side of screen) trash can, delete (far right side of screen)
Change the delivery quantity Click Click on Click to go pack to the packing screen. to automatically pack save
If the picklist has already been printed, you will need to force print a new one
Rich Erickson
62471785.doc
Page 7
Airport Codes
On VT02N if you're using a mode of "A" = Air, "AC" = Air Charter, "AE" = Air Expedite, regardless of who the Customer is, when you hit the 5th button (Shpmt Completion) you will get an error because you are now required to input an Airport Code. The Airport code is listed on the Addit. Data Tab. There's a drop down you can choose from. If you see a code is missing, you must establish a Vantive Case.
Rich Erickson
62471785.doc
Page 8
Type Material Number Type Plant Code Select BOM Application: PP01 Select Execute to go back to SAP Easy Access Screen
Type Material Number Type of Where Used List: Direct Used In: Material BOM Select Next Screen Icon
Rich Erickson
62471785.doc
Page 9
Click on Go To>Header>Administration Click on drop down arrow for Delivery block Click on Block Customer ASN Click save
Rich Erickson
62471785.doc
Page 10
Click on Envelope next to Ship To Party number Type in new address information Click Click (bottom left) save
Rich Erickson
62471785.doc
Page 11
Type in Delivery Number Click Click on Click on Shipment tab Move cursor to Incoterms field Use drop down arrow to select terms (ie. PPD or COL) Tab over to the next field and hand type the words Prepaid or Collect Click save enter
Rich Erickson
62471785.doc
Page 12
Click
enter.
Type in Output Type Examples of Doc LDOO ZK00 ZLDO ZMXB ZSDW ZSPS Packing List/BOL Pick List Return Delivery Note MX Bill of Lading SDW Test BOL Star PackSlip Ho ZPDS ZL00 ZLL0 ZPFI ZSPO Delta PackSlip H Pick List Lean Load List Pro Forma Invoice Ship Direct BOL/Pack
Click
enter
Type in the Shipping Point Click on the Execute Icon Click on box a far left to select line Select the button to make changes; to printer, or number of copies (number of messages)
Select a new printer or make changes to the number of messages (copies). Then Select You will receive a message OR Click trash can, delete the output document. Then Select
USE T CODE V V72 TO MAKE CHANGES TO OUTPUT FROM SHIPPERS. THIS IS LIMITED TO MASTER BILL OF LADING AND ADVANCE SHIP NOTIFICATIONS (ASN)
Rich Erickson
62471785.doc
Page 13
Click on the Pack material tab Click Click select all (far right side of screen) trash can, delete (far right side of screen)
IF YOU NEED TO MAINTAIN SERIAL NUMBER RELATIONSHIPS TO THE DELIVERY GO TO OPTION A Change the delivery quantity Click Click on Click save to automatically pack ( You can leave the transaction at this point)
Type LM00 Click enter. Fill in the screen format 8x 40. Then select the F1 Save Button or F1 on your keyboard.
Rich Erickson
62471785.doc
Page 14
OPTION A (Continued) Select the Shipping Button Select the Delivery Picking Button
Fill in the Plant for the delivey. Select a printer for the plant. Then in the selection field type 2 and press the enter key on the keyboard.
Fill in the Delivery Number Then press the enter key on the keyboard.
Rich Erickson
62471785.doc
Page 15
OPTION A (Continued)
This message at the bottom of the screen tells you when the delivery with all the serial number information has been updated.
Rich Erickson
62471785.doc
Page 16
Click on Go To>Header>Administration. Enter the Outside Delivery Shipment No. or the Misc. Delivery number in the Ext. delivery Field. It will then print out on the Bill of Lading for reference purposes.
Click
save
Rich Erickson
62471785.doc
Page 17
Click on the Partner tab (lower part of screen) Move cursor to white field for Partner Function Using drop down arrow, select Freight Forwarder Tab to the Partner field Enter the Freight Forwarder Code 9xxxxx (See Find Freight Forwarder to get code.) Click enter
Pop-up box Restrict value range appears Click black X in top right corner to close box Click save.
Rich Erickson
62471785.doc
Page 18
Type in Movement Type 933 for Engineering Type in the Plant Code XXXX Type in the Storage Location XXXX Type in the Reason Code XXXX
See below
Click
Rich Erickson
62471785.doc
Page 19
If relevant enter
Click
execute
Deliveries listed for Userid and Date chosen Click on Item view icon to see more detail.
Rich Erickson
62471785.doc
Page 20
Click on the Idoc Status tab Enter date range in Shipment End Date fields Type in your Shipping Point Click
Rich Erickson
62471785.doc
Page 21
Type in the date range in Created on fields Click a check mark in Dlv. Sched. and JIT Sched. At the Customer Material field, click on Click Click on the drop down arrow and import your MRP text file. Click Copy
Click a check mark at the Red light for Display IDOC list for following status(es) Erase any number in the Maximum number of IDOC for Info Message field Click on Recipient Data tab Type your plant code xxxx in Partner Number of Recipient Click Execute
Rich Erickson
62471785.doc
Page 22
Complete a Shipment
Type VT02N Click enter.
Verify or complete header data (trailer no., seal, etc) Click Click Click Click the button. checkmark will appear checkmark will appear
Rich Erickson
62471785.doc
Page 23
Click green
Click on the Picking tab Click on Edit Click on Copy picked quantity as delivery quantity Click save
Rich Erickson
62471785.doc
Page 24
ZOVER
ZUND
Rich Erickson
62471785.doc
Page 25
Type /nVL09 ( Reverse Post Goods Issue ) ( Moves Material Back into Inventory and Cancels Billing) Select Enter or click Type in your Shipping Point Type in the Shipment Number Click on the Clock icon Click the box to the left of the Delivery number Click Cancel/Reverse icon
The Post goods Issue Reversal is Complete You Can select Main Screen.
Rich Erickson
62471785.doc
Page 26
IF YOU ARE GOING TO REMOVE SERIAL NUMBERS THAT HAVE ALREADY BEEN PICKED TO A DELIVERY . Enter VL02N Select Enter or click 8xxxxxxxx Select Enter or click
Click on the Packaging Icon On the Pack Material Tab Select the Select All Icon Then on the Pack Material Tab Select the Trash Icon Select the Return Button At the right side of screen. also on the right side of screen.
Click on the box to the left of the part number you want to delete (to highlight the line) Click Save
THE REMOVAL OF SERIAL NUMBERS CAN BE PERFORMED VIA MDE OR IN SAP Type /n ZMDEPICK To go Directly to MDE Delivery Picking ( Or enter LM00 and follow the menu to Delivery Picking ) Click or press ENTER key
Type 2 in the Selection box Type in or scan your Delivery number Click on Serial #s Type in the serial number(s) to be removed from the delivery Select the Enter key after each entry Click on Remove serial no. Click on F3 Back Click on F8 Finish Click on Yes The delivery is being under picked do you want to continue? Click Yes to update delivery Select Enter to process delivery
Rich Erickson
62471785.doc
Page 27
Type in your Delivery number Click or select Enter mark on pop-up box
Type in your Delivery number Click or select Enter mark on pop-up box
Click on the Packaging Icon On the Pack Material Tab Select the Select All Icon Then on the Pack Material Tab Select the Trash Icon Select the Return Button At the right side of screen. also on the right side of screen.
Click on the box to the left of the part number you want to delete (to highlight the line) Click on (delete line)
Click Yes on the pop-up box Click Save Type /nVT02N Select Enter or click Type in Shipment No. Select Enter or click Re-click all buttons Click save button. on shipment
Rich Erickson
62471785.doc
Page 28
Create a Delivery
Type VL10 Click enter. ( Example LIDC )
Type in your Shipping Point Click on the User Role Tab Role Z001 Role Z002 OPTIONAL
General Data Tab fill in the Ship to number to limit selection to a specific customer. Material Tab fill in the Material number to limit selection to a specific material number. Delivery Creation Date top of main screen. Change the open order period being reviewed.
Click Click the selection box to the left of the part number being shipped Change the Cuml quantity to the amount being shipped
Click Record the Delivery number (shown under "Document") OPTIONAL You can also display a copy of the delivery for review by selecting
Rich Erickson
62471785.doc
Page 29
Click
or select enter key If the Ship To location is set up in SAP and has a 700000 series number, enter it. Otherwise type shipper and add address information.
Click
or select enter key Add name address. US, postal code and city name will be checked against internal table.
Click
to continue.
Complete the above fields, with the current date, total weight of the shipment, and numbers of boxes, pallets etc..
Rich Erickson
62471785.doc
Page 30
Complete the above fields, with the, MISC or ( other Misc CODE), Quantity, SU will default in PC , best description of what is being shipped. Click or select enter key to continue.
tab to continue.
Complete the Route with 000000 ----- Incoterms PPD and Prepaid or COL Shp. Cond. 02 Standard or 01 As soon as possible (expedited)
and Collect
tab to continue.
From the drop down list select Forwarding agent (The truck line) Under Partner type the SCAC code for the truck line . For a customer truck type VEND
Click
The Misc Delivery is complete so select the Save At the3 bottom of the screen a message will appear.
Rich Erickson 62471785.doc Page 31
Icon
8xxxxxxx .
NOW THAT THE DELIVERY IS CREATED IT WILL BE ATTACHED TO A SHIPMENT AND COMPLETED
Type Click
/nvt01n
or select enter key Enter your Transportation Planning Point and Select your shipment type from drop down. Almost always Delphi Shipment US
Icon
Enter your Shipping Point SCROLL DOWN TO THE DELIVERY STATUS AREA. Blank out the Total gds mvt stat & Trns. Plan status Fields.
Enter your Outbound Delivery number or numbers AT THE BOTTOM OF THE Select Outbound Deliveries DROP DOWN BOX SELECT THE Execute Icon
Rich Erickson
62471785.doc
Page 32
Icon to continue. Start selecting the shipment completion buttons. At the first button the shipping information will be pulled in from the Delivery. At the fifth button you will get a Pop Up Box to confirm or enter additional Transportation information.
At this Pop Up Box you must enter a Trailer Number and Seal Number even if NA. If shipment is a premium you will have to enter additional premiun information at this point.
Icon
Rich Erickson
62471785.doc
Page 33
Icon.
At the bottom of the screen you will receive the following message type Record the Shipment Number.
How to add notes on the Bill of Lading Go back to the Delivery VL02N Change screen and enter the delivery number and ENTER. Select the Header Icon.
Tab.
Double click on Header note The information that you type will appear in the Customer Specific Information box on the Bill of Lading. Shipping instructions will appear as Notes at the bottom of the BOL.
Pro Forma Information for International Miscellaneous Delivery / Shipment information. Valuations.
Rich Erickson
62471785.doc
Page 34
After completing the item information on the delivery. Select a line item (see below) then follow the menu path to Conditions
Select Condition type ZR00 then enter the dollar valuation per quantity Click or select enter key Icon and repeat the process for other materials.
Rich Erickson
62471785.doc
Page 35
Pro Forma Information for International Miscellaneous Delivery / Shipment information. Country of Origin
After completing the item information on the delivery. Select a line item (see below) then follow the menu path to Foreign trade / Customs
Select the Origin / Destination / Business tab. Select the country of origin from the drop down list.
Rich Erickson
62471785.doc
Page 36
Create a Shipment
Type VT01N Click enter.
Click the
button
Scroll down and type your delivery number in "Outbound deliveries" box Click the button or F8 to execute. button.
Click OVERVIEW
button.
Rich Erickson
62471785.doc
Page 37
VL01N or VL10
Enter the Shipping Point Enter a selection date one month in the future Enter the Scrap Sales order from the Excel file from COPS.
icon
Click
save
OR USE
TYPE VL10 Click enter
VL10
Select the
Tab
Enter the Sales order Number Select Select the open line item and enter the desired Delivery Quantity in the Cum Cloumn
Rich Erickson
62471785.doc
Page 38
Select
Rich Erickson
62471785.doc
Page 39
Type in the Vendor number Type in one of the part numbers to be shipped in "Components Provided" Type in the Plant Code xxxx Click on Click on the selection box next to the part number you want to ship Click on Create Deliveries button In the pop up box, type in the Storage location (0001) Type in the quantity to be shipped Click on Write down the delivery number which will appear in the pop up box Click on You will go back to the original requirements screen Type /nVL02N in the command box Click or press ENTER key
Add any additional part numbers and quantities to the delivery Click on Click on Pack icon to automatically pack back twice
Type in your Transportation Point Using Drop Down Arrow, select Delphi Shipment US Click
Rich Erickson
62471785.doc
Page 40
Type in your Shipping Point Scroll down and deselect the check mark in the transportation planning tab
Scroll down and type your delivery number in "Outbound deliveries" box Click the button
Click on your delivery number at bottom of the screen and drag it to the top of the screen Click OVERVIEW button.
Type in carrier in Fwd Agent field if not populated from scheduling agreement. Type in Mode of transportation in Shipping Type field Type in 02 for Standard, 01 for Premium in Shipping Condition field. Click on Click on Click on Click on Click save button. button.
Rich Erickson
62471785.doc
Page 41
Enter desired date range in Dlv.Sch.Date Type your plant code xxxx in Plant field Type in your Shipping Point At the Customer Material field, click on Click Click on the drop down arrow and import your MRP text file. Click execute
Rich Erickson
62471785.doc
Page 42
To Delete Shipment
Click on the delivery number and drag it to the bottom of the screen Click the trashcan Click <YES> to Delete
Rich Erickson
62471785.doc
Page 43
If the delivery is associated with a shipment your will get a message. Click green on pop up box
Click on the Picking tab Type in the pick quantity Click Save
Rich Erickson
62471785.doc
Page 44
In the Sales Order data date fields enter start and end dates. Selection criteria select Open Orders Click Click Click In the Click This brings you back to the main VA05 Screen with a note Click Report Titled Engineering Orders. Click Select Select Select In the Select This repot can be printed or sent to an Excel spread-sheet. enter your engineering shipping point xxxx. to select Shipping point as a filter criteria. to filter the report to a plant level. with note of date range. This has all E&C open box enter ZPRO (Engineering Document Type)
Rich Erickson
62471785.doc
Page 45
Enter Shipping Point for Engineering Orders XXXX Click execute icon
Click
Click save layout. You will get another drop down to Save Layout As
Enter your layout name and description. Click to retain this layout format.
Click
Rich Erickson
62471785.doc
Page 46
DRAFT
Type ME38 Click enter.
Enter the Date and the quantity Go to Edit drop down, select Generate JIT sched. You may get a Warning If date for Delivery date is OK hit Enter System will respond Select
QUESTION SELECTIONS
Rich Erickson 62471785.doc Page 47 Created on 2/4/2004 04:02:00 PM
Select
Rich Erickson
62471785.doc
Page 48
Select the
Enter:
Company code
Duns No
Plant Code
Click
save
Rich Erickson
62471785.doc
Page 49