Beruflich Dokumente
Kultur Dokumente
Version : R6.1
www.Prepking.com
www.Prepking.com
1. A customer has 2 VIO servers, supporting 4 client partitions. They want to configure Shared Ethernet Adapter Failover. What is the minimum number of physical Ethernet adapters required for each VIO server? A. 1 B. 2 C. 4 D. 8 Answer: A
2. What is the minimum requirement to update the managed system's firmware from the HMC if inventory scout is already installed? A. A public internet connection B. All logical partitions must be active C. One partition must be configured with Service Authority D. A local repository must be configured prior to the update Answer: C
3. A customer wants to use Live Application Mobility which comes as part of the Workload Partition virtualization offering. Which of the following is the minimum configuration that will satisfy the customer requirement? A. AIX 6.1 with POWER6 B. AIX 6.1 with POWER4 C. AIX 5.3 with POWER5 D. AIX 5.3 with POWER4 Answer: B
4. A customer wishes to use Live Partition Mobility for system maintenance. What is the minimum requirement? A. PowerHA B. Virtual I/O server 1.4
www.Prepking.com
5. A customer is planning to use Live Partition Mobility on a new Power 570. Which of the following must be considered when pre-configuring the system in the IBM System Planning Tool (SPT)? A. VIO-server setup is unsupported in SPT B. Live Partition Mobility is unsupported in SPT C. IVE setup is unsupported when using Live Partition Mobility D. VIO-server setup is unsupported when using Live Partition Mobility Answer: C
6. The Integrated Virtualization Manager is packaged with which of the following? A. PowerVM B. Virtual I/O Server C. Partition Load Manager D. Virtual Workload Manager Answer: B
7. What is required to collect data for analysis by the Workload Estimator (WLE)? A. WLE LPP B. WLE servlet C. bos.wle.rte fileset D. AIX 5.3 TL3 or later Answer: D
8. A customer has multiple POWER5 systems connected to one HMC at version 6. They have ordered a new POWER6 system. What is necessary in order to get the new POWER6 system managed by an HMC? A. The old HMC can be used without change. B. The old HMC must be upgraded to the latest level.
www.Prepking.com
C. POWER6 and POWER5 must be connected to different HMCs. D. The POWER6 system must have a separate partition on the HMC. Answer: B
9. A customer has purchased a 64-way Power 595. What must be considered when planning the physical location? A. A Power 595 requires three-phase electricity on its own UPS. B. A Power 595 must be placed on a concrete floor due to its weight. C. A Power 595 must be placed on a raised floor because of the cooling requirement. D. A Power 595 requires 1 meter of clear space on all sides for maintenance and airflow. Answer: C
10. A customer has a VIOS environment configured on a Power 570 server. There are two LPARs with application servers and three with Oracle databases. Data disks are located on EMC Symmetrix boxes attached via SVC. Which driver should be used for disks on VIO servers? A. SVCD B. RDAC C. SDDPCM D. PowerPath Answer: C
11. On a POWER6 570, which of the following will allow a single disk device to have multiple paths to a partition running AIX 6.1? A. The SDD function included in AIX 6.1. B. The MPIO function included in AIX 6.1. C. The optional SDD driver on the AIX 6.1 installation media. D. The optional MPIO driver on the AIX 6.1 installation media. Answer: B
12. A customer is installing a Power 595 with dual HMCs for redundancy. What must be considered?
www.Prepking.com
A. Each HMC requires use of different DHCP address ranges. B. Both HMCs must be connected to the managed systems on the same private subnet. C. The HMCs must be connected to the same port on the managed system using an internal hub. D. The primary HMC must be configured as a DHCP host and the failover HMC as a DHCP client. Answer: A
13. A customer has configured a dual VIOS environment and wants to map SAN attached disks to an LPAR using each VIO server. One VIO server is configured and the LPAR can see the disk but when trying to map the disks on the second VIO server, an error is given stating that there is no access to the device. Which of the following is the most likely cause? A. The hdisk numbers on the VIO servers do not match. B. MPIO support had not been installed on VIO server 2. C. The virtual SCSI adapter on VIO server 2 does not have the client LPAR name defined. D. The reserve_policy attribute of the hdisk is not set appropriately on the 1st VIO server. Answer: D
14. A system administrator for a business recovery service center needs to test disaster recovery strategies for their clients who run AIX and Linux on several LPARs. Each client has a different system configuration. Each time a client comes in, the system configuration of the managed system must change for disaster recovery verification. What is the most efficient way to handle this using LPAR? A. Create a set of LPARs for each client utilizing the needed resources and activate this set of LPARs. B. Create one partition profile for each client. Reconfigure the managed system by activating the partition profile for that client. C. Dynamically move processors and memory as needed into each logical partition. Reconfigure the managed system by activating and deactivating partition profiles. D. Create a system profile for each client to combine the partition profiles needed. Reconfigure the managed system by activating and deactivating the system profile corresponding to that client. Answer: D
www.Prepking.com
15. A customer is planning for Live Partition Mobility. Which of the following can be used for this configuration? A. Use of Shared Ethernet Adapter (SEA) and Fiber Channel (FC) devices for that partition. B. Use of Shared Ethernet Adapter (SEA) and Virtual SCSI (vSCSI) devices for that partition. C. Use of Integrated Virtual Ethernet Adapter (IVE) logical port and Fiber Channel (FC) devices for that partition. D. Use of Integrated Virtual Ethernet Adapter (IVE) logical port and Virtual SCSI (vSCSI) devices for that partition. Answer: B
16. A customer is implementing a dual Virtual I/O server environment to service 4 LPARs. If each operating system image requires 18 GB of disk space, what is the minimum amount of SCSI resource necessary? A. Two SCSI paths and two 73 GB SCSI disks B. Two SCSI paths and two 146 GB SCSI disks C. Four SCSI paths and four 73 GB SCSI disks D. Two dual port SCSI RAID adapters with two 73 GB SCSI disks Answer: B
17. A Power 570 is planned to run in a dual VIOS environment. The VIOS should be equipped for maximum resilience to provide LUN access to both VIO servers. What are the minimum requirements? A. Two dual port adapters B. Four dual port adapters C. Two single port adapters D. Four single port adapters Answer: D
18. A customer is planning to mount NFS filesystems through a firewall. Which of the following must be done to enable this? A. Edit nfsd port usage in /etc/services and open this port on the firewall. B. Edit mountd port usage in /etc/services and open this port on the firewall.
www.Prepking.com
C. Edit nfsd port usage in /etc/inetd.conf and open this port on the firewall. D. Edit mountd port usage in /etc/inetd.conf and open this port on the firewall. Answer: B
19. In a dual VIOS environment, what is the minimum number of fiber adapters per VIO server required to provide high availability? A. 1 B. 2 C. 4 D. 8 Answer: A
20. What must be set to achieve maximum performance from a dual port 10/100/1000 Ethernet adapter? A. In Ethernet switch, set port to trunk mode. B. In Ethernet switch, enable source IP routing. C. In AIX, set adapter speed to auto and duplex to Full. D. In AIX, set adapter speed to 1000 Mbps and duplex to Full. Answer: D
21. What command is used to create an application Workload Partition? A. mkwpar B. crwpar C. wparexec D. mkappwpar Answer: C
22. Which command is used to disable telnet access to VIO server? A. stopnetsvc telnet B. stopsrc -s telnet C. service telnet stop
www.Prepking.com
23. In a particular environment, there is a firewall between the LPARs and the HMC. Dynamic LPAR does not seem to be working. Which of these protocols and ports must be open on the firewall in order for DLPAR to work? A. port 657 tcp B. port 576 tcp C. port 657 tcp/udp D. port 576 tcp/udp Answer: C
24. A customer has cloned a system. He wants to edit some files in the clone. How can this be done without the need to boot the newly created clone? A. alt_rootvg_op -W B. alt_rootvg_op -O C. alt_disk_install -X D. alt_disk_install -S Answer: A
25. while planning the logical volume design of a new install, a customer considered using a striped logical volume for performance. They want to be able to extend the logical volume in the future. Which of the following actions will provide this capability? A. Create a logical volume and add physical volumes two at a time B. Create a columned striped logical volume using -C option of mklv C. Create an extendable striped logical volume using -E option of mklv D. Create a logical volume and change it to a striped volume using chlv -s Answer: B
26. A customer is installing a VIO server to reduce the number of fibre channel adapters needed for each
www.Prepking.com
partition. The customer wants to use host based mirroring to replicate the data between two storage subsystems. Which of the following describe how this can be accomplished? A. Create LVM mirrors between LUNs. B. Install and configure the MPIO device driver for mirroring. C. Enable Metro Mirror between the VIO server and the partitions. D. Use separate fibre adapters in the VIO Server for each storage subsystem. Answer: A
27. After configuring a Shared Ethernet Adapter (SEA) on a Virtual I/O server, one client partition has no network connectivity while another works fine. Which of the following is a possible cause? A. VLAN ID not configured on client OS B. SEA is not configured with a control adapter C. VLAN ID is not set appropriately in the server profile on the HMC D. VLAN ID is not set appropriately in the client profile on the HMC Answer: D
28. A customer is currently running AIX in several LPARs on POWER6. The customer now wants to add virtual Ethernet to two of the LPARs. This will enable the application tier to communicate with the database tier without using external Ethernet cards. What is the best way to accomplish this task? A. Create a new trunk adapter in the VIO server B. Create a new Shared Ethernet Adapter in a VIO server C. Create Shared Ethernet Adapters in the database and the application partition D. Modify each of the LPAR profiles to add a virtual Ethernet adapter in the same VLAN Answer: D
29. A customer will be using the Virtual I/O (VIO) Server to share both Fibre channel and Ethernet adapters among multiple LPARs. The customer is using mostly web services in the LPARs. Which of the following should be considered? A. Shared Ethernet Adapters and Virtual SCSI services require separate VIO servers
www.Prepking.com
100% Pass Guaranteed or Full Refund Word to Word Real Exam Questions from Real Test Buy full version of exam from this link below http://www.prepking.com/000-100.htm