Beruflich Dokumente
Kultur Dokumente
Power output: 2x25W 8 ohm Balanced DSP: 2x 7 Second order high precision biquads.l Input: USB, SPDIF and Analog Safety: Fully protected against short circuit/overload/temperature. The ASM200 is an Active speaker module with built in DSP of highest sonic performance based on the LA200 DAC AMP. But it is also a comprehensive suite of software for measuring, testing and designing the speaker response.
Stereo Active speaker passive crossover This setup is for lowest cost for a stereo pairs. One module is used and can be mounted inside one of the speakers, and speaker wires can be led to the other speakers. The crossover can be more simple than usual, because the ASM200 can equalize some of the drivers problems.
1.Power: Connect Power adaptter. (19V3A) .Plus Is middle pin. 2.Ipod charger A 5V current controlled output for charging external hardware. Up to 300mA possible. 3.Analogue Input 1. RCA stereo connector. Connect Ipod or personal player here 4.Ext analog inputs: Extra 2 stereo analog inputs can be connected here . 1 input has bias power for microphone electret microphone. 5.USB input. Driverless, just connect to PC /MAC. 6.SPDIF is the S/P DIF optical input. Use toslink bre interconnect cable. This input is totally galvanic isolated, so this input is good to avoid ground loops. 7.EXT digital inputs. 1 SPDIF COAX input can be wired here directly plus 2 more SPDIF input (need external components) 8.Ext I2S. An I2S source can be connected here, e,g wi module or other. 9.Frontpanel: Optional front panel can be connected here and can provide Volume control, IR remote, Input selector and LED's . 10.Speaker output. Speakers are attached here. Beware that it is fully balanced (not ground referenced) and supply voltage is present. 8 Ohm is recommended. 11.Upload. A serial interface for uploading lter cooefficients to the module. The serial dongle is provide with the kit, or can be ordered seperately. 12.Not used 13. Connector for optional power amplier( similar to the one on the mainboard) for stereo active speakers with active crossover.