Beruflich Dokumente
Kultur Dokumente
www.automation4me.com
Products Line-up
LX700 16~1600
LX700: With its Remote I/O & various networking configurations, it is best suited for applications involving multiple devices spread over a large installation LX70: With Modular design, advanced control, a wide range of options & multiple communication possibilities, this PLC is designed to handle an extensive range of applications. LX7: This powerful micro controller brings the flexibility of expansion in PLC configuration LX7s: A compact micro controller for simple applications, supported by a strong communications capability.
Performance
LX70
16~384
LX7
28~104
www.automation4me.com
LX7S
A compact micro controller for simple applications, supported by a strong communications capability.
www.automation4me.com
LX7S Family
LX7S-48 LX7S-40 LX7S-28 LX7S-20 LX7S-14 LX7S-10 8DI / 6DO 6DI / 4DO
I/O
www.automation4me.com
LX7
A powerful micro controller which combines the flexibility of the modular PLC design and LX7s.
www.automation4me.com
LX7 Family
LX7-48 Digital I/O: 48~104
LX7-20 6A
LX7-20 4A
LX7-28
Control Scale:
Base unit available with 10/14/20/28/40/48 points(For LX7S). 28 to 104 points (Base unit available with 28/48 points)(For LX7).
Easy Installation:
Use the DIN Rail or the convenient mounting holes for direct panel mounting.
Analog Potentiometers:
Adjustment of Timers / counters (2Nos) with front panel potentiometers.
www.automation4me.com
Base modules with Analog I/Os. Voltage (0~10vdc) or current (0~20mA) connections for each channel.
www.automation4me.com
Operator Interfaces:
A wide range of Operator Interfaces / SCADA can be connected for data editing and display on Modbus.
www.automation4me.com
LX7 Controller
Diagnostic LEDs RUN/PROG/ERROR COM1/COM2 COM1 RS-232/RS485 Port Connect to PC UDP, Modbus RTU COM2 RS232/RS-485 Port Connect to PC UDP, Modbus RTU Battery (3 volt) (Inside Cover) Input Connection Terminal Block I/O Status LEDs Expansion Bus Connector (Inside cover) Operation mode selector switch RUN/RMT/PROG
LX7 Configuration
Modem Programming Tools Programming Tools / HMI / SCADA
www.automation4me.com
www.automation4me.com
LX70
Modular PLC with advanced control, a wide range of options & multiple communication possibilities, is suitable to handle an extensive range of applications
www.automation4me.com
LX70 at a glance
Modular, Flexible, Communicative. Control Scale:
The maximum number of direct I/O points is 384.
Easy Installation:
Use the DIN Rail or the convenient mounting holes for direct panel mounting.
LX70 at a glance
Bigger Memory Capacity:
Program memory:20K words (LX70_CPU70p2) 9.6k words (LX70_CPU70p1) Data memory:4K words (LX70_CPU70p2) 2k words (LX70_CPU70p1)
LX70 at a glance
Built-in PID control: (LX70-CPU70p2 module)
Equipped with built-in 8 PID control logic for precise control.
Operator Interfaces:
A wide range of Operator Interfaces / SCADA can be connected for data editing and display on Modbus. www.automation4me.com
LX70-CPU70p2
Operating Switch
RUN RMT PROG
Battery (3 volt)
Back-Up (Inside Cover)
COM 1
RS-232C/ RS485 Port Connect to PC & T/P & MMI etc.
Side Cover
LX70 at a glance
Supports various I/O and specialty modules
The LX70 processor module supports
Digital I/Os
24V dc input (16/32 points). 110V ac input. 220V ac input. Relay output Transistor output (16/32 points, Source/Sink). SSR output. Mixed I/O (16/32 Channels)
16points
32points
www.automation4me.com
LX70 at a glance
Supports various I/O and specialty modules
The LX70 processor module supports
Analog I/Os
A/D (4/8 channels) {voltage/current}.
www.automation4me.com
LX70 at a glance
Supports various I/O and specialty modules
The LX70 processor module supports
Analog I/Os
D/A (2/4 channels ) {voltage/current}.
SSR
www.automation4me.com
LX70 at a glance
Supports various I/O and specialty modules
The LX70 processor module supports
Analog I/Os
RTD (4channels). Thermocouple (4 channels).
www.automation4me.com
LX70 at a glance
Supports various I/O and specialty modules
The LX70 processor module supports
High Speed Counter
High-speed counter (1/2 Channels)
Max. Counter speed : 100k cps Calculation range : 24Bit (-16,777,216 - + 16,777,215) Comparison output : C=P, C>P
HSC1
HSC2 www.automation4me.com
LX70 at a glance
Supports various I/O and specialty modules
The LX70 processor module supports
High Speed Counter
High-speed counter (4 Channels)
Max. Counter speed : 200k cps Calculation range : 32Bit (-2,147,483,648 - + 2, 147,483,647) Comparison output : C=P, C>P (8 points)
HSC4 www.automation4me.com
LX70 at a glance
Supports various I/O and specialty modules
The LX70 processor module supports
Pulse Train Output
Pulse train output (PTO) (4 Channels)
Pulse output, 4ch: Max. output frequency:100k Hz PWM output, 4ch: PWM output frequency:30k Hz
LX70-PULSE4 www.automation4me.com
LX70 at a glance
Supports various I/O and specialty modules
The LX70 processor module supports
Serial Communication Unit
RS232C/ RS485, 2 port
Data buffer function , 500byte / 1 frame RS232C : for Interface to barcode reader, IDX , Oscilloscope RS485 : for Interface to connect network of servo drive, inverter, thermo controller. etc..
Barcode Reader IO Card Printer
Measurement Device
LX70-SCU www.automation4me.com
www.automation4me.com
www.automation4me.com
www.automation4me.com
www.automation4me.com
www.automation4me.com
www.automation4me.com
PLC Applications
Injection Molding Machines Pick & place devices Blow Molding Machines
Packaging Machines
PLC Applications
www.automation4me.com
www.automation4me.com
Features Configuration
Compact Design & Program LX7-28points =100(W)*90(H)*78(D) LX70 =150(W)*105(H)*91(D) -2Slots Flexibility Various Rack Type : 2~12 slots Easy Replaceable Module Various System configuration
www.automation4me.com
Features - Performance
High Performance High Speed : 0.2us/instruction Compact Instructions Small Memory Management Architecture Intelligent Special Module High Resolution Module
www.automation4me.com
Features - Solutions
Various Application Wide I/O Points Various I/O & Special Module Network & Serial communication Universal standard Standard Ladder Diagram Programming Open Protocol & Communication ports Standards and certifications
www.automation4me.com
Family comparison
Type
Digital I/O Memory Cap. Memory Backup Comm. Port Protocol Special Func. Special Module I/O Types HSC, PULSE Out(TR) TBD Basic Type
LX7s
10/14/20/28/40/48 2.0 K Words Flash Rom 1 RS232C/ 1 RS485
LX7
28/48/56/76/84/104 9.0 K Words Flash Rom, Battery 2 RS232C/485
LX70
~384 Points 9.6 ~ 20K Words Flash Rom, Battery 1 or 2 RS232C/485
LX700
Local : ~1600 Points 20K Words Flash Rom, Battery 2 RS232C/485
Modbus, UDP PID, RTC HSC, PULSE Analog 4I/2O 28/48, 2 Expansion. PID, RTC, PID, RTC,
Analog, TC, RTD, HSC, Pulse, Position, SCU, CCU+, Link, Remote DI 16/32p, DO 8/16/32P Mix 16/32P DI 16/32/64p, DO 16/32/64P
www.automation4me.com
LX General Specifications
Temperature Humidity Withstand Voltage Allowed moentary power failuer Noise Immunity Insulation Resistance Vibration Immunity Dust Condition Chemicals Corrosive gas Shock Immunity Grounding Case Material Cooling Method Environment Operating Storage Operating o to 55 C -20 to 70 C 10 to 90% RH (Non condensing) 1500V ac for 1 minute between external terminal (ac) and frame ground (FG). 500V ac for 1 minute between external terminal (dc) and frame ground (FG). 20ms or less 1500 Vp-p pulse width 50ns, 1micro sec (generated by noise simulator) 10M. 10 to 55 Hz/ 1 min, amplitude 0.75mm, each direction of X, Y, Z for 10min. No conductive dust. No cutting oil and organic solvents. No corrosive gas. 98m/S or more, 4 times X, Y, Z each direction. Class 3 grounding (100 or less) PC / ABS. Natural air cooling. IP20.
2
www.automation4me.com
www.automation4me.com
85~264Vac
www.automation4me.com
12 20 12 20 12 20 12 12 8 8 8 8 4 4 4 4 2 2
www.automation4me.com
www.automation4me.com