Beruflich Dokumente
Kultur Dokumente
TM
The Basic Voice Communication System for High-Security and Isolation Booth Situations
Todays security and isolation booths are often the best step you can take to protect your employees. But do they protect or help maintain your very important good will? Not if clerks and customers have to shout, growl and repeat themselves to be heard or understood. Norcons patent pendingTTU-1Talk-Thru Communicator is a 2way, hands-free audio system that provides high-quality personal communication between people separated by security or isolation barriers. It is the most widely used system of its type in the U.S., and the world. attenuation circuit prevents outside noise from bothering the attendant. The TTU-1 provides clear communication even in environments with high ambient noise by shaping the sound for maximum intelligibility. A talk LED indicates the attendants (gooseneck microphone) is activated. Its compression circuitry decreases loud, annoying sounds. The TTU-1A is equipped with a Jack to add a headset or wireless headset. Simply plug the headset in and communicate. The headset contains light weight construction, a boom mic and a single speaker that covers one ear.
HOW IT WORKS...
The Norcon TTU system permits hands-free communication between the booth attendant and the customer. Vox circuitry facilitates ongoing, clear, 2-way conversation at all times as if the two parties were together in the same room. The TTU-1 Talk-Thru Communicator now incorporates circuitry to automatically attenuate the outside channel. If the gooseneck microphone is not used for a period of 30 seconds, the outside channel volume will be reduced approximately 70%. Normal operation is restored as soon as the attendant speaks into the gooseneck microphone. The automatic volume
HOW TO INSTALL...
Installation of the TTU-1A is a very simple, one-person operation. All thats needed is a 3 - 4 inch cutout in the barrier. All hardware and cable are supplied. Please specify barrier thickness when ordering. The TTU-1A is supplied with a continuous-duty, 117-Volt power supply which is stepped down to 15 Volts.
SPECIFICATIONS
MECHANICAL 1 Outside face plate: Solid aluminum, anodized finish, tamper-resistant. 2 Control housing (inside): Machined aluminum, anodized finish, tamper resistant. 3 Size : Outside face plate 5 in. dia. x 1/2 in. deep. Inside control housing for housing for UL level 3 BP 5 in. dia x 3 1/2 in. D for UL in. dia. x 3 1/2 in. Deep. Microphone & gooseneck 18 long.(other lengths available) 4 Weight: 4 lbs. 5 Mounting: Partition hole 3 to 4 in. dia. (3 1/2 in. recommended) Specify barrier thickness when ordering. 6 Panel controls: Listen volume, talk volume, on-off switch, headset jack.
Talk-Thru systems are shipped complete with cables, instructions, and power supply.
TTU-1AB
TM
The Basic Voice Communication System for High-Security Bullet Proof Situations
Todays security and isolation booths are often the best step you can take to protect your employees. But do they protect or help maintain your very important good will? Not if clerks and customers have to shout, growl and repeat themselves to be heard or understood. Norcons patent pendingTTU-1 Talk-Thru Communicator is a 2-way, hands-free audio system that provides highquality personal communication between people separated by security or isolation barriers. It is the most widely used system of its type in the U.S., and the world. The TTU-1AB is UL level 3 ballistic rated bullet resistant. as the attendant speaks into the gooseneck microphone. The automatic volume attenuation circuit prevents outside noise from bothering the attendant. The TTU-1 provides clear communication even in environments with high ambient noise by shaping the sound for maximum intelligibility. A talk LED indicates the attendants (gooseneck) Microphone is activated. The compression circuitry decreases loud, annoying sounds. The TTU-1A is equipped with a Jack to add a headset or wireless headset. Simply plug the headset in and communicate. The headset contains light weight construction, a boom mic and a single speaker that covers one ear.
HOW IT WORKS...
The Norcon TTU system permits hands-free communication between the booth attendant and the customer. Vox circuitry facilitates ongoing, clear, 2-way conversation at all times as if the two parties were together in the same room. The TTU-1 Talk-Thru Communicator now incorporates circuitry to automatically attenuate the outside channel. If the gooseneck microphone is not used for a period of 30 seconds, the outside channel volume will be reduced approximately 70%. Normal operation is restored as soon
HOW TO INSTALL...
Installation of the TTU-1A is a very simple, one-person operation. All thats needed is a 3 - 4 inch cutout in the barrier. All hardware and cable are supplied. Please specify barrier thickness when ordering. The TTU-1A is supplied with a continuous-duty, 117-Volt power supply which is stepped down to 15 Volts.
3.
TTU-1AJ same as TTU-1A, But with a removable gooseneck microphone. Housing depth 2 1/2 TTU-1AJB same as TTU-1AJ, but with bullet-resistant option (UL Level 3) Housing depth 3 1/2 TTU-1D Battery operated unit complete with rechargeable batteries and charger. Housing depth is 3 1/2 in. TTU-1DB same as TTU-1D, but with bullet-resistant option (UL Level 3) Housing depth is 4 1/2 TTU-1DJ same as TTU-1D, But with a removable gooseneck microphone. Housing depth 3 1/2 TTU-1DJB same as TTU-1DJ, but with bullet-resistant option (UL Level 3) Housing depth is 4 1/2
4. 5.
SPECIFICATIONS
6. ELECTRONIC 1. Audio frequency response: Selectively shaped for maximum voice intelligibility 2. Audio power:2 Watts per amplifier (2 amplifiers) 3. Distortion:Less than 2% 4. Listen mode:20 dB compression 5. Talk mode: Vox 6. Microphones: Electret 7. Power supply: Input: 120 VAC, 60 Hz Output: 15 VDC, 175 mA Other input power is available upon request
TTU-3 Counter mount unit (no need to cut a hole in the glass) 6 or 12 TTU-HS Headset for TTU products TTU-WHS Wireless headset for TTU products
Talk-Thru systems are shipped complete with cables, instructions, and power supply.
TTU-1D
TM
The Battery Operated Voice Communication System for High-Security and Isolation Booth Situations
Todays security and isolation booths are often the best step you can take to protect your employees. But do they protect or help maintain your very important good will? Not if clerks and customers have to shout, growl and repeat themselves to be heard or understood. Norcons patent pendingTTU-1D Talk-Thru Communicator is a 2-way, hands-free audio system that provides highquality personal communication between people separated by security or isolation barriers. It is the most widely used system of its type in the U.S., and the world. The TTU-1D is ideal for applications where running a power cable would hinder the cosmetics of the isolation booth. as the attendant speaks into the gooseneck microphone. The automatic volume attenuation circuit prevents outside noise from bothering the attendant. The TTU-1D provides clear communication even in environments with high ambient noise by shaping the sound for maximum intelligibility. A talk Led Indicates the attendants (gooseneck) microphone is activated. The compression circuitry decreases loud, annoying sounds. The TTU-1D is equipped with a Jack to add a headset or wireless headset. Simply plug the headset in and communicate. The headset contains light weight construction, a boom mic and a single speaker that covers one ear.
HOW IT WORKS...
The Norcon TTU system permits hands-free communication between the booth attendant and the customer. Vox circuitry facilitates ongoing, clear, 2-way conversation at all times as if the two parties were together in the same room. The TTU-1D Talk-Thru Communicator now incorporates circuitry to automatically attenuate the outside channel. If the gooseneck microphone is not used for a period of 30 seconds, the outside channel volume will be reduced approximately 70%. Normal operation is restored as soon
HOW TO INSTALL...
Installation of the TTU-1D is a very simple, oneperson operation. All thats needed is a 3 - 4 inch cutout in the barrier. All hardware and cable are supplied. Please specify barrier thickness when ordering. The TTU-1D is supplied with a PS-2 charger, simply plug the charger into the charger jack located above the headset jack, and charge the
SPECIFICATIONS
MECHANICAL 1 Outside face plate: Solid aluminum, anodized finish, tamper-resistant. 2 Control housing (inside): Specifications are subject to change Machined aluminum, anodized without notice. finish, tamper resistant. 3 Size : Outside face plate 5 in. dia. x 1/2 in. deep. Inside control housing 5 in. dia. x 3 1/2 in. Deep. Microphone & gooseneck 18 long.(other lengths available) 4 Weight: 4 lbs. 5 Mounting: Partition hole 3 Talk-Thru systems are shipped complete to 4 in. dia. (3 1/2 in. with cables, instructions, and battery recommended) Specify barrier charger. thickness when ordering. 6 Panel controls: Listen volume, talk volume, on-off switch, headset jack.
TTU-3
Counter-Top
The Ideal Counter-Top Communication System Where It is Impractcal to cut a hole in the Barrier
There are times when its impractical, for various reasons, to cut a 3- to 4- inch hole through an isolation barrier or to mount a communicator in a window or secure gate. But your employees and your customers still have a way to communicate clearly and calmly. In such cases, the Norcon TTU-3 is the communication system of choice. The prism shaped units of the TTU-3 are ideal for mounting on a counter top on both sides of a barrier. Yet they allow hands free communications through barriers typically found in banks, cashiers booths, information booths and similar envirornments. The TTU-3 incorporates the same high-quality electronics as the basic Patent Pending Norcon TTU-1 Talk-Thru system. It is a vox system, enabling the attendant and the customer to have hands free two way communication. The TTU-3 provides clear communication even in environments with high ambient noise by shaping the sound for maximum intelligibility. Its compression circuitry decreases loud, annoying sounds. The TTU-3 Talk-Thru Communicator now incorporates circuitry to automatically attenuate the outside channel. If the gooseneck microphone is not used for a period of 30 seconds, the outside channel volume will be reduced approximately 70%. Normal operation is restored as soon as the attendant speaks into the gooseneck microphone. The automatic volume attenuation circuit prevents outside noise from bothering the attendant. The TTU-3 is equipped with a Jack to add a headset or wireless headset. Simply plug the headset in and communicate. The headset contains light weight construction, a boom mic and a single speaker that covers one ear.
HOW TO INSTALL...
The TTU-3 comes ready to operate. The prism units are quickly and easily mounted on the counter-top on opposite sides of the barrier. The unit can be positioned back-to-back (as shown), however, it is not required to mount the units against the barrier. The unit can be mounted at a convenient location for the user. A power adapter and all cables are supplied. The TTU-3 is supplied with a continuous-duty, 117-Volt power supply which is stepped down to 15 Volts.
SPECIFICATIONS
MECHANICAL
1 Outside assembly: 121/2 in.W x 23/8 in. H x 23/8 in. D Machined aluminum, clear anodized finish, tamper resistant. weight: 2 LBS. 2 Inside assembly: 121/2 in.W x 23/8 in. H x 23/8 in. D Machined aluminum, clear anodized finish, tamper resistant. weight: 2 LBS. 3 Mounting: countertop 4 Inside assembly Panel Controls: Listen volume, Talk volume, power on/off, LED power indicator.
Specifications are subject to change without notice.
MOUNTING DETAILS
A TYPE MOUNTING
BARRIER
B TYPE MOUNTING
BARRIER
TTU-3 6 inch
TM
There are times when its impractical, for various reasons, to cut a 3- to 4- inch hole through an isolation barrier or to mount a communicator in a window or secure gate. But your employees and your customers still have a way to communicate clearly and calmly. In such cases, the Norcon TTU-3 is the communication system of choice. The prism shaped units of the TTU-3 are ideal for mounting on a counter top on both sides of a barrier. Yet they allow hands free communications through barriers typically found in banks, cashiers booths, information booths and similar envirornments. The TTU-3 incorporates the same high-quality electronics as the basic Patent Pending Norcon TTU-1 Talk-Thru system. It is a vox system, enabling the attendant and the customer to have hands free two way communication. The TTU-3 provides clear communication even in environments with high ambient noise by shaping the sound for maximum intelligibility. The compression circuitry decreases loud, annoying sounds. The TTU-3 Talk-Thru Communicator now incorporates circuitry to automatically attenuate the outside channel. If the gooseneck microphone is not used for a period of 30 seconds, the outside channel volume will be reduced
The Ideal Counter-Top Communication System Where It is Impractcal to cut a hole in the Barrier
approximately 70%. Normal operation is restored as soon as the attendant speaks into the gooseneck microphone. The automatic volume attenuation circuit prevents outside noise from bothering the attendant. A talk LED indicates the attendants microphone is activated. The TTU-3 is equipped with a Jack to add a headset or wireless headset. Simply plug the headset in and communicate. The headset contains light weight construction, a boom mic and a single speaker that covers one ear.
HOW TO INSTALL...
The TTU-3 comes ready to operate. The prism units are quickly and easily mounted on the counter-top on opposite sides of the barrier. The unit can be positioned back-to-back (as shown), however, it is not required to mount the units against the barrier. The unit can be mounted at a convenient location for the user. A power adapter and all cables are supplied. The TTU-3 is supplied with a continuous-duty, 117-Volt power supply which is stepped down to 15 Volts DC.
SPECIFICATIONS
MECHANICAL 1 Outside assembly: 6 in.W x 23/8 in. H x 23/8 in. D Machined aluminum, clear anodized finish, tamper resistant. weight: 2 LBS. 2 Inside assembly: 6 in.W x 23/8 in. H x 23/8 in. D Machined aluminum, clear anodized finish, tamper resistant. weight: 2 LBS. 3 Mounting: countertop 4 Inside assembly Panel Controls: Listen volume, Talk volume, power on/off, LED power indicator.
Specifications are subject to change without notice.
MOUNTING DETAILS
A TYPE MOUNTING
TTU-1DJ same as TTU-1D, But with a removable gooseneck microphone. Housing depth 3 1/2 TTU-1DJB same as TTU-1DJ, but with bullet-resistant option (UL 3) Housing depth 4 1/2 TTU-HS Headset for TTU products TTU-3 Standard model same as the TTU-3 -6 inch but 12 1/2 long. Talk-Thru systems are shipped complete with cables, instructions, and power supply. Mounting hardware is not included.
BARRIER
B TYPE MOUNTING
BARRIER
TTU-302
TM
Counter-Top 2-Way Talk Thru Electronic Communication System
Counter-Top 2-Way Talk-Thru Electronic System permitting Off-Hours Back Office Communication
During off hours, when there is no attendant at the front counter, employees in the back office still can talk to your customers, by using the Norcon TTU-302. The TTU-302 system includes two 12" prism-shaped inside units (inside unit A & inside unit B) and one prism shaped outside unit. The inside unit A and outside unit are mounted on the front counter and operate the same way as the basic TTU-3. Inside unit B is mounted in the remote back office. When the customer visits the front counter during the off hours, the customer can push the PUSH TO CALL button which will sound a buzzer in the remote inside unit B. Employees will turn on the inside unit B and talk to the customer. Both inside unit A and inside unit B have their own high-quality electronics and individual power supply. The user can turn on the inside unit at any time. When one inside unit is turned on the other inside unit will be turned off. Only one inside unit will remain operational at any given time. The TTU-302 incorporates the same high-quality electronics as the basic patent pending Norcon TTU-1 TalkThru system. It is a vox system, enabling the attendant and the customer to talk and listen giving easy natural conversation. The TTU-302 provides clear communication even in environments with high ambient noise, shaping the sound for maximum intelligibility. Its compression circuitry decreases loud, annoying sounds. HOW TO INSTALL... The TTU-302 comes ready to operate. Inside unit A and the outside unit are quickly and easily mounted on the counter-top on opposite sides of the barrier. The portion of the unit with the gooseneck microphone and labeled as A goes inside the booth, the unit with the PUSH TO CALL button is mounted outside. The portion of the unit with the gooseneck microphone and labeled as B goes to the back office. An 8 conductors jacketed cable connects unit A and unit B. The TTU-302 is powered by a continuous-duty AC power supply that is stepped down to 15 Volts.
ELECTRONIC
1 Audio frequency response: Selectively shaped for maximum voice intelligibility 2 Audio power: 2 Watts per amplifier (2 amplifiers) 3 Distortion: Less than 2% 4 Listen mode: 20 dB compression 5 Talk mode: Vox 6 Microphones: Electret 7 Power supply: Input: 120 VAC, 60 Hz Output: 15 VDC, 175 mA Other input power is available upon request.
SPECIFICATIONS
MECHANICAL
1 Outside assembly: Machined aluminum, anodized finish, tamperresistant. 2 Inside assemblies: Machined aluminum, anodized finish, tamperresistant. 3 Size (all 3 assemblies): 12 in.w x 23/8 in. h x 23/8 in. d 4 Weight: 41/2 LBS. 5 Mounting: Counter-top 6 Panel Controls: LISTEN volume, TALK volume, POWER On/Off (random position on/off), LED power indicator.
Specifications are subject to change without notice.
MOUNTING DETAILS
A TYPE MOUNTING
BARRIER
B TYPE MOUNTING
BARRIER
TTU-3MS5
TM
The prism shaped master station of the TTU-3MS is ideal for mounting on a counter top.
One attendant at the master station can monitor and respond to calls from up to five remote stations.
TTU-3MS-5
TECHNICAL INFORMATION
SPECIFICATIONS
MECHANICAL 1. Master station: 161/2 in.W x 23/8 in. H x 23/8 in. D weight: 2 LBS. 1. Interconnect box: 101/2 in. W x 121/8 in. H x 53/16 in. D weight: 8 LBS. 1. Surface mount Sub-Station: 41/2 in. W x 41/2 in. H x 4 in. D weight: 4 LBS. 1. Flush mount Sub-Station: 6 in. W x 6 in. H x 33/8 in. D weight: 4 LBS. 1. Master Station Panel Controls: Listen volume, Talk volume, power on/off, LED power indicator, remote call indicators 1-5, remote call selector switches 1-5
TM
TTU-3MS10
The prism shaped master station of the TTU-3MS is ideal for mounting on a counter top.
One attendant at the master station can monitor and respond to calls from up to ten remote stations.
TTU-3MS-10
TECHNICAL INFORMATION
SPECIFICATIONS
MECHANICAL 1. Master station: 161/2 in.W x 23/8 in. H x 23/8 in. D weight: 2 LBS. 1. Interconnect box: 101/2 in. W x 121/8 in. H x 53/16 in. D weight: 8 LBS. 1. Surface mount Sub-Station: 41/2 in. W x 41/2 in. H x 4 in. D weight: 4 LBS. 1. Flush mount Sub-Station: 6 in. W x 6 in. H x 33/8 in. D weight: 4 LBS. 1. Master Station Panel Controls: Listen volume, Talk volume, power on/off, LED power indicator, remote call indicators 1-10, remote call selector switches 1-10
TM
TTU-4
HOW TO INSTALL...
The TTU-4 comes ready to operate. The prism units are quickly and easily mounted on the counter-top on opposite sides of the barrier. They can be positioned back-to-back (as shown) or randomly.Tamper resistant screws are used for both units. A special tool is furnished for these screws. There are two ways to install the TTU-4: either run the cable between the units through a small hole in the barrier, or under the counter-top (as shown on the back page). The TTU-4 uses a continuous-duty, 117-Volt power supply which is stepped down to 15 Volts.
HOW IT WORKS...
The TTU-4 incorporates the same high-quality electronics as the basic Patent Pending Norcon TTU-1 Talk-Thru system. It is a vox system, enabling the inmate and the visitor to have hands free two way communication. The Norcon TTU-4 provides clear communication, shaping the sound for maximum intelligibility. The compression circuitry decreases loud, annoying sounds. Since the TTU-4 is designed
MOUNTING DETAILS
A TYPE MOUNTING
B A R R IER
B TYPE MOUNTING
SPECIFICATIONS
B A R R IER
MECHANICAL 1 Outside assembly: Machined aluminum, anodized finish, tamperresistant 2 Inside assembly: Machined aluminum, anodized finish, tamper resistant 3 Size (both assemblies): 121/2 in.W x 23/8 in. H x 23/8 in. D 4 Weight: 2.5 lbs. 5 Mounting: Counter-top 6 Panel controls: No external controls
Specifications are subject to change without notice.
Talk-Thru systems are shipped complete with cables, instruction, and power supply. Mounting hardware is not included.
TM
TTU-5
HOW TO INSTALL...
The TTU-5 unit with the controls goes on the corridor side; the other unit on the inmate or patient side. Simply connect the cable provided to the terminal blocks on the stainless steel plates. Then fasten these plates to the back-boxes using the tamper-proof screws and special tool furnished. The panel on the exterior (corridor) side is connected to a continuous-duty, 117-Volt AC power supply which is stepped down to 15 Volts.
HOW IT WORKS...
The microphone/speaker combination is designed to penetrate high-ambient noise levels. In addition, the TTU-5s circuitry shapes and enhances the sound for
SPECIFICATIONS
MECHANICAL
1. Steel Back-boxes 11 1/2 in H x 3 1/2 in W x 2 in D 2. Face Plates: 0.0625 in. Stainless steel standard. (Other gauges available.) 13 5/8 in. H x 4 1/2 in. W 3. Weight: Depends on gauge and type of material. 4. Mounting: Back-boxes recessed in barrier wall. 5. Panel controls: Exterior (corridor) panel only on-off witch, recessed listen volume, and recessed talk volume.
Clear 2-way hands-free voice communication. Quality electronic design and engineering. Avoids shouting, repetition, misunderstanding. No gooseneck microphone and no external controls. Rugged, tamper-resistant materials. Simple one person installation. No need to cut hole in barrier. Provides ongoing activity monitoring as needed. Export models available. Units available for ADA applications. Made in U.S.A.
ELECTRONIC
1 Audio frequency response: Selectively shaped for maximum voice intelligibility Audio power: 2 Watts per amplifier Distortion: Less than 2% Listen mode: 20 dB compression Talk mode: Vox Microphones: Electret Power supply: Input: 120 VAC, 60 Hz Output: 15 VDC, 175 mA
2 3 4 5 6 7
Talk-Thru systems are shipped complete with back-boxes, mounting hardware, instructions, and power supply.
TTU-7
The Ideal Communication System for problem installations where a security gate or shade is used
For those times when its impractical, for various reasons, to mount the inside control section of a communicator in a window with a secure gate the Norcon TTU-7 is the communication system of choice. The prism shaped control unit of the TTU-7 is ideal for mounting on a counter top on the interior side of a barrier. The system allows hands free communications through barriers typically found in banks, cashiers booths, information booths and similar envirornments. The TTU-7 incorporates the same high-quality electronics as the basic Patent Pending Norcon TTU-1 Talk-Thru system. It is a vox system, enabling the attendant and the customer to have hands free two way communication. The TTU-7 provides clear communication even in environments with high ambient noise by shaping the sound for maximum intelligibility. The compression circuitry decreases loud, annoying sounds. The TTU-7 Talk-Thru Communicator now incorporates circuitry to automatically attenuate the outside channel. If the gooseneck microphone is not used for a period of 30 seconds, the outside channel volume will be reduced approximately 70%. Normal operation is restored as soon as the attendant speaks into the gooseneck microphone. The automatic volume attenuation circuit prevents outside noise from bothering the attendant. A talk LED indicates the attendants (gooseneck) microphone is activated. The TTU-7 is equipped with a Jack to add a headset or wireless microphone. Simply plug the headset in and communicate. The headset contains light weight construction, a boom mic and a single speaker that covers one ear.
HOW TO INSTALL...
Installation of the TTU-7 is a very simple, one-person operation. All thats needed is a 3 - 4 inch cutout in the barrier. All hardware and cable are supplied. Please specify barrier thickness when ordering. The prism unit is quickly and easily mounted on the counter-top on the inside of the barrier, at a convenient location for the user. A power adapter and all cables are supplied. The TTU-7 is supplied with a continuous-duty, 117-Volt power supply which is stepped down to 15 Volts.
SPECIFICATIONS
MECHANICAL 1 Outside assembly: 5 in. dia x 1/2 in. deep solid aluminum outside. 1 in. deep inside clear anodized finish, tamper resistant. 2 Inside assembly: 6 in. W x 23/8 in. H x 23/8 in. D Machined aluminum, clear anodized finish, tamper resistant. weight: 2 LBS. 3 Mounting: window / countertopInside assembly Panel Controls: Listen volume, Talk volume, power on/off, LED power indicator.
Talk-Thru systems are shipped complete with cables, instructions, and power supplies. Mounting hardware is not included. Specifications are subject to change without notice.