Sie sind auf Seite 1von 2

# # # # # # # # #

This file contains error messages which are shown to user, when http/https login is used. These messages can be changed to make user interface more friendly, including translations to different languages. Various variables can $(error-orig) $(ip) $(username) be used here as well. Most frequently used ones are: - original error message from hotspot - ip address of a client - username of client trying to log in

# internal-error # It should never happen. If it will, error page will be shown # displaying this error message (error-orig will describe what has happened) internal-error = internal error ($(error-orig)) # config-error # Should never happen if hotspot is configured properly. config-error = configuration error ($(error-orig)) # not-logged-in # Will happen, if status or logout page is requested by user, # which actually is not logged in not-logged-in = you are not logged in (ip $(ip)) # ippool-empty # IP address for user is to be assigned from ip pool, but there are no more # addresses in that pool ippool-empty = cannot assign ip address - no more free addresses from pool # shutting-down # When shutdown is executed, new clients are not accepted shutting-down = hotspot service is shutting down # user-session-limit # If user profile has limit of shared-users, then this error will be shown # after reaching this limit user-session-limit = no more sessions are allowed for user $(username) # license-session-limit # Depending on licence number of active hotspot clients is limited to # one or another amount. If this limit is reached, following error is displayed. license-session-limit = session limit reached ($(error-orig)) # wrong-mac-username # If username looks like MAC address (12:34:56:78:9a:bc), but is not # a MAC address of this client, login is rejected wrong-mac-username = invalid username ($(username)): this MAC address is not you rs # chap-missing # If http-chap login method is used, but hotspot program does not receive # back encrypted password, this error message is shown.

# Possible reasons of failure: # - JavaScript is not enabled in web browser; # - login.html page is not valid; # - challenge value has expired on server (more than 1h of inactivity); # - http-chap login method is recently removed; # If JavaScript is enabled and login.html page is valid, # then retrying to login usually fixes this problem. chap-missing = web browser did not send challenge response (try again, enable Ja vaScript) # # # # invalid-username Most general case of invalid username or password. If RADIUS server has sent an error string with Access-Reject message, then it will override this setting.

invalid-username = invalid username or password # invalid-mac # Local users (on hotspot server) can be bound to some MAC address. If login # from different MAC is tried, this error message will be shown. invalid-mac = user $(username) is not allowed to log in from this MAC address # uptime-limit, traffic-limit # For local hotspot users in case if limits are reached uptime-limit = user $(username) has reached uptime limit traffic-limit = user $(username) has reached traffic limit # radius-timeout # User is authenticated by RADIUS server, but no response is received from it, # following error will be shown. radius-timeout = RADIUS server is not responding # auth-in-progress # Authorization in progress. Client already has issued an authorization request # which is not yet complete. auth-in-progress = already authorizing, retry later # radius-reply # Radius server returned some custom error message radius-reply = $(error-orig)

Das könnte Ihnen auch gefallen