Beruflich Dokumente
Kultur Dokumente
an interactive spreadsheet for the design of timber formwork systems for cast in place elevated concrete slabs
General Note:
- Numbers that appear in BLUE are input by the user - Numbers that appear in RED are calculated by the computer
Source
Design Load:
- Calculated combined dead and live loads to be used for the design
Plywood
- Calculated and practical joist spacing based on plywood properties
Studs-Wales
- Calculated and practical stringrer spacing based on stud properties
Stringer-Shore
- Calculated and practical shore spacing based on stringer properties
Shore
- Calculated axial capacity for selected shore size and properties
Credit
Calculation Summary
- Bending, deflection & shear /// Plus axial loads & column stability
Source
All formulas, calculations and tables were based on ACI Committee 347, Formwork for Concrete, 6th ed.
Credit William "Bill" C. Epstein Associate Professor, CM Dept. Cal Poly, San Luis Obispo
Pressure
Calculated Maximum Joist spacing: 21.19 Enter Actural Joist Spacing: 19.20
Inches Inches
Plywood
Moisture Content
Moisture Content <19% Moisture Content > 19%:
Length of Split
No Split No Split 1/2 the wide face 1/2 the wide face 3/4 the wide face 3/4 The width of the wide face the wide face 1.5 and more of the wide face
of Material
The width of the wide face 1.5 and more of the wide face
68.71 60.00
inches inches
pass
0
Joists-Stringers
Moisture Content
Moisture Content <19% Moisture Content > 19%:
Length of Split
No Splits
No Splits 1/2 the wide face 1/2 the wide face 3/4 the wide face 3/4 the wide face The width of the wide face The width 1.5 and more of the1.5 and more of the wide face wide face of the wide face
of Material
Suggested Shore spacing (inches): Actual Shore Spacing (inches): Bearing check between shore and stringer:
59.39 57.00
pass
Stringer-Shore
Moisture Content
Moisture Content <19% Moisture Content > 19%:
Nominal Size of Shores Test for Axial Load: Test for Slenderness: pass pass
2x4 2x6 2x8 3x4 3x6 3x8 4x4 4x6 4x8 Finish 6x6 6x8 S4S 8x8 Rough
of Material
Shore
Moisture Content
Moisture Content <19% Moisture Content > 19%:
of Material
Shore
<------Joists------>
40 Ft
114.00 PLF
2% of Concrete DL 2% of Formwork DL
N
100.00 PLF
North-South Direction
Lateral Force in N/S Direction (PLF) Max. Unbraced Length (in) (Shore Spacing)
East-West D
Brace Load
Length of Slab (Ft) Width of Slab (Ft) 2% of Concrete DL (lb) 2% of Formwork DL (lb) Joist Orientation
60.00 40.00
4080.00 480.00
North-South East-West
teral Force in N/S Direction (PLF) Max. Unbraced Length (in) (Stringer Spacing)
Calculation Summary
JOIST SPACING
Bending size: Fb: S: w: Adjustment: Alternate Fb: 3/4" 1545 0.41 150.00 1.25 Deflection 3/4" 1500000 0.2 150.00 1
25.22
Rolling Shear size: 3/4" Fs: 57 lb/Q: 6.76 w: 150.00 Adjustment: 1.25 Alternate Fs: = 1/16'' size: E: I: w: Adjust (Moisture): Alternate E: Deflection 3/4" 1500000 0.2 150.00 1
l / 360
size: E: I: w: Adjustment: Alternate E:
21.19
Minimum Value:
21.19
STRINGER SPACING
Bending size: Fb: S: w: Adjust (Moisture): Adjust (Use): Adjust (size): Alternate Fb: 2x6 1250 7.56 240.00 1 1 1
68.71
size: Fv d w: bd: Adjust (Moisture): Adjust (Use): Adjust (shear): Alternate Fv:
l / 360
Deflection
87.47
= 1/4''
Page 11
Calculation Summary
Minimum Value:
68.71
SHORE SPACING
Bending size: Fb: S: w: Adjust (Moisture): Adjust (Use): Adjust (size): Alternate Fb: 4x6 1250 17.65 750.00 1 1 1
59.39
size: Fv d w: bd: Adjust (Moisture): Adjust (Use): Adjust (shear): Alternate Fv:
Shear 4x6 90 5.5 750.00 19.25 1 1 2 Deflection 4x6 1600000 48.53 750.00 1 1
l / 360
size: E I: w: Adjust (Moisture): Adjust (Use): Alternate E:
79.36
Minimum Value:
59.39
Page 12
Calculation Summary
Bearing Joists-Stringers
w: Width of Joist: Width of Stringer: Contact Area: Actual Stress (psi): Allowable Stress (psi): 1200.00 1.5 3.5 5.25 228.57 565
Bearing Stringers-Shores
w: Width of Stringer: Width of Shore: Contact Area: Actual Stress (psi): Allowable Stress (psi): 3562.50 3.5 3.63 12.69 280.79 565
pass
SHORES
Axial Load and Slenderness Test
E: Alternate E: Fc: Alternate Fc: d le: le/d: Fc Adjust (Moisture): Adjust (Use): Adjust (size): 1,500,000 1,600 3.63 120.00 33.10 1 1 1
pass
Page 13
Calculation Summary x: Cp: Area: axial Load Capacity: 0.2567 0.2413 13.14 5073.16 pass
Total Load
3562.50
HORIZONTAL BRACES
Axial Load, Slenderness Test & Tributary Length North-South Direction
E: Alternate E: Fc: Alternate Fc: d le: le/d: Fc Adjust (Moisture): Adjust (Use): Adjust (size): x: Cp: Area: Axial Load Capacity: Max. Tributary Length: 1500000 1600 1.5 57.00 38.00 1 1 1 0.1948 0.1862 5.25 1564.47 15.64
East-West Direction
E: Alternate E: Fc: Alternate Fc: d le: le/d: Fc Adjust (Moisture): Adjust (Use): Adjust (size): x: Cp: Area: Axial Load Capacity: Max. Tributary Length: 1500000 1600 1.5 60.00 40.00 1 1 1 0.1758 0.1689 5.25 1418.89 12.45
pass
13.69
Page 14
Calculation Summary
65.74
21.52
93.50
88.19
Page 15
Calculation Summary
72.60
81.98
Page 16
Calculation Summary
ngers-Shores
pass
Page 17
Calculation Summary
ength Direction
pass
CONTROLLING
Page 18