Beruflich Dokumente
Kultur Dokumente
Anchor Systems
Anchor Systems
Introduction Page Anchor Technical Software Profis 287 Product Approvals / ETA Advantage 288 Adhesive Anchors HVZ adhesive anchors (for cracked concrete) 289-290 HVU adhesive anchor system 291-292 HIT-RE 500 for reinforced concrete 293 HIT-HY systems 294-298 Dispensers and accessories for HIT 298 Hilti HIT Profi system 299-300 Heavy Duty Metal Anchors HDA undercut anchor and accessories 301-302 HSL3 heavy duty expansion anchor 303-304 HSC self cutting anchor and accessories 305-306 Medium Duty Metal Anchors HST safety stud anchor HSA standard stud anchor HKD-S push-in anchor HLC sleeve anchor HUS (10.5 / 12.5 and 16.5) universal screw anchor HUS-HF universal screw anchor Light Duty Metal & Plastic Anchors HUS-H (7.5) universal screw anchor HT metal frame anchor HRD plastic frame anchors Fixings for scaffolding and restraints HHD-S cavity anchor HLD light duty anchor HSP / HFP drywall anchor HPS-1 hammer screw DBZ wedge anchor metal nail-in HA8 ring anchor ceiling anchor HUD-1 universal anchor
317-318 319 320-322 323 324 325 325 326 327 327 330
Insulation Fasteners IZ expansion insulation fasteners 328 IDP insulation fasteners 329 IDMR metal insulation fasteners 329 Special Products Test meter kits 331 Rail anchors 332
286
Anchor Systems
More details are available from the Technical Advisory Service on:
PROFIS
From quick, rough and dirty calculations to fully defined designs Graphical input with all dimensions and loading visible User-defined print output Easy-to-understand Anchor setting animations Supports 13 different design methods and 16 languages Always up to date with regular downloads and add-on Workshop drawings to ensure the fabricators get it right Free downloads
For complete Anchor setting instructions and Anchor design data.
287
As an international company, Hilti has gained many approvals for its products.
an approval system for products which cannot be standardised performance driven recognised throughout Europe a requirement for CE marking
When should I use products with ETAs? ETAs are most beneficial,
n n
Scheme Advisory gulations Water Re
when the product will be permanently installed into the works if failure would cause risk to human life and/or serious economic consequences
What are benefits to the specifier? By specifying these products in accordance with the guideline (ETAG) you can,
n n n n
DIBt
FM Factory Mutual
HST, HKD-S.
produce efficient designs show clear, independent evidence of the safety of your designs show compliance with building regulations use the same design across Europe without the need for local approvals
How can Hilti help the specifier? Hilti is now available to offer products with ETAs. We offer a comprehensive range of technical support,
n n n n n n
copies of ETAs copies of the design method ETAG Annex C (also available on CD ROM) guidance note - Introduction to European Technical Approvals for CE marking telephone technical advice technical specialists can visit your office or site Hilti Anchor Design Profis Program CD ROM includes options to design to the ETAG.
288
Anchor Systems
Drill holes.
tgel
tcure
Tinst
Injection washer Allows baseplate clearance hole to be filled with HIT HY150. This ensures that the applied shear load is distributed evenly on to all anchors.
Spherical washer Prevents local stress raisers if hole is not drilled square to surface. Nut & Locknut Prevents nut from working loose under vibration.
Technical data: HVZ, HVZ-RTZ, HVZ-HCRTZ Recommended load, L rec (kN): concrete f ck,cube = 25 N/mm2 Uncracked concrete Cracked concrete
HVZ HVZ-RTZ HVZ-HCRTZ Anchor size Tensile N Rec Shear V Rec Tensile N Rec Shear V Rec Tensile N Rec Shear V Rec M10 15.6 10.3 15.6 11.4 15.6 11.4 M12 19.1 15.4 19.1 17.1 19.1 17.1 M16 25.8 29.1 25.8 32.0 25.8 32.0 M16L 33.6 29.1 33.6 32.0 33.6 32.0 M20 53.2 50.3 53.2 56.0 53.2 56.0 M10 9.5 10.3 9.5 11.4 9.5 11.4 M12 15.9 15.4 15.9 17.1 15.9 17.1 M16 18.4 29.1 18.4 32.0 18.4 32.0 M16L 23.9 29.1 23.9 32.0 23.9 32.0 M20 38.0 50.3 38.0 56.0 38.0 56.0
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
289
Dynamic set
Item no.
Item no.
Item no.
Ordering designation
Item no
M10 M10 M10 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 M20
10 10 10 10 10 10 10 10 10 10 10 10 10 10
HVU-TZ M10 HVU-TZ M10 HVU-TZ M10 HVU-TZ M12 HVU-TZ M12 HVU-TZ M12 HVU-TZ M12 HVU-TZ M16 HVU-TZ M16 HVU-TZ M16 HVU-TZ M16 HVU-TZ M16 HVU-TZ M16 HVU-TZ M20
00311368 00311368 00311368 00311369 00311369 00311369 00311369 00311370 00311370 00311370 00311370 00311370 00311370 00335942
HAS-TZ M 10x75/15 HAS-TZ M 10x75/30 HAS-TZ M 10x75/50 HAS-TZ M 12x95/25 HAS-TZ M 12x95/50 HAS-TZ M 12x95/100 HAS-TZ M 16x105/30 HAS-TZ M 16x105/60 HAS-TZ M 16x105/100 HAS-TZ M 16x125/30 HAS-TZ M 16x125/60 HAS-TZ M 16x125/100 HAS-TZ M 20x170/40
00310018 00308383 00308384 00308385 00308386 00308387 00308388 00308389 00308390 00332519 00332520 00332521 00335943
HAS-RTZ M 10x75/15 HAS-RTZ M 10x75/30 HAS-RTZ M 10x75/50 HAS-RTZ M 12x95/25 HAS-RTZ M 12x95/40 HAS-RTZ M 12x95/50 HAS-RTZ M 12x95/100 HAS-RTZ M 16x105/30 HAS-RTZ M 16x105/60 HAS-RTZ M 16x105/100 HAS-RTZ M 16x125/30 HAS-RTZ M 16x125/60 HAS-RTZ M 16x125/100 HAS-RTZ M 20x170/40
00310019 00308391 00308392 00308393 00333769 00308394 00308395 00308396 00308397 00308398 00332522 00332523 00332524 00335944
Dynamic Set M10 Dynamic Set M10 Dynamic Set M10 Dynamic Set M12 Dynamic Set M12 Dynamic Set M12 Dynamic Set M12 Dynamic Set M16 Dynamic Set M16 Dynamic Set M16 Dynamic Set M16 Dynamic Set M16 Dynamic Set M16 Dynamic Set M20
00369201 00369201 00369201 00369202 00369202 00369202 00369202 00369203 00369203 00369203 00369203 00369203 00369203 00369204
TE-C HEX M10 TE-C HEX M12 TE-C HEX M16 TE-Y HEX M20
l l
l1)
l1)
l2) 3)
l2) 3) l l
1) 2) 3)
use with TE-C-WZA chuck use TE-FY-BY-C setting adaptor use low hammering power for HAS(-R)
290
Anchor Systems
Use n eavy-duty fastenings with small spacing and edge distances H n uitable for making fixings underwater (contact Technical Advisory S Service for details) System n onsisting of adhesive in a foil capsule and an anchor rod or internally C threaded sleeve
trel
tcure
Features
nA virtually odourless resin system containing
no styrene
Technical data: HVU, HAS, HAS-R, HAS-HCR Recommended load, L rec (kN): concrete f ck,cube = 25 N/mm2 HVU + HAS
Anchor size Tensile N Rec Shear V Rec Tensile N Rec Shear V Rec M8 7.8 5.6 8.8 6.3 M10 11.8 9.0 11.8 10.1 M12 17.0 13.1 17.0 14.6 M16 24.8 24.7 24.8 27.7 M20 44.9 38.6 44.9 43.3 M24 64.7 55.6 64.7 62.3 M27 79.2 117.1 63.6 45.8 M30 104.0 142.4 77.2 55.6 M33 122.1 177.4 96.3 69.4 M36 145.2 208.2 113.0 81.3 M39 166.4 250.4 135.9 97.9
n ood flow properties and surface wetting G nUnaffected by temperature and weather,
power due to a new resin system and a larger amount of quartz granules n ood fire resistance properties G
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
80 M8 90 M10 110 M12 125 M16 170 M20 210 M24 240 M27 270 M30 300 M33 330 M36 360 M39 Storage temperature 5 to 25C
10 12 14 18 24 28 30 35 37 40 42
14 18 22 28 32
10 10 10 10 5 5 4 4 4 2 2
HVU M 8 80 HVU M10 90 HVU M12 110 HVU M16 125 HVU M20 170 HVU M24 210 HVU M27 240 HVU M30 270 HVU M33 300 HVU M36 330 HVU M39 360
00256691 00256692 00256693 00256694 00256695 00256696 00256697 00256698 00256699 00256700 00256701
Anchor rods and sockets, see page 297 For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387
291
TE-C HEX M10 TE-C HEX M12 TE-C HEX M16 TE-Y HEX M20
l l
l1) l1)
1)
l l l l
l l l
l l l
TE-C-E M 8 TE-C-E M10 TE-C-E M12 TE-C-E M16 TE-Y-E M16 TE-Y-E M20 TE-Y-E M24
Drive sockets
Use with TE connection For anchor Ordering designation Item no.
TE-C HIS 1/2" TE-C HIS 1/2" TE-C HIS 1/2" TE-FY HIS 3/4" TE-FY HIS 3/4" TE-FY HIS 3/4"
HIS-N M8 HIS-N M10 HIS-N M12 HIS-N M12 HIS-N M16 HIS-N M20
13mm socket 1/2" 17mm socket 1/2" 19mm socket 1/2" 19mm socket 3/4" 24mm socket 3/4" 30mm socket 3/4"
s s s s s s
00032220 00032221
13 17 19 24 30
For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387 0800 886 100 | www.hilti.co.uk 1850 287 387 | www.hilti.ie Hilti. Outperform. Outlast.
292
Anchor Systems
HIT-RE 500 Optimal curing for professional fastening of reinforcing bars up to T40 into large deep holes Reliable n ery high loading values with reinforcing bars in a wide V range of diameters (8 to 40 mm dia.) n ptimum working time in the extended temperature range from O - 5 to + 40C n uitable for use in holes drilled using diamond coring equipment, S rotary hammers, pneumatic drills nLow sensitivity to oversized holes, dusty and wet holes n ed coloured adhesive for easy checking of proper setting on site R nComprehensive technical data for effective fastening design Convenient nWell proven, self-opening foil pack system n ow dispensing force for quick and easy work L nWide range of dispensers for different requirements Environmentally friendly nReduced waste due to unique foil pack nOdourless adhesive
Water Regulations Advisory Scheme
cures at
- 5OC
Item no.
Ordering designation
HIT-RE-M static mixer 1 suitable for foil pack and jumbo cartridge HIT-EXT 9/1000 Length: 1000 mm, External diameter: 9 mm HIT-EXT 16/700 Length: 700 mm, External diameter: 16 mm
Setting operations 1 2 3
Features nThe new adhesive ensures reliable fastening, even when holes are drilled using diamond coring equipment or pneumatic drills, are poorly cleaned, wet or oversized nConvenient dispensing tools for different requirements
t cure , ini t cure , fu 36h 72h 25h 50h 12h 24h 6h 12h 4h 8h 2h 4h
Technical data: HIT-RE 500 + rebar Recommended load, L rec (kN): concrete f ck,cube = 25 N/mm2 HIT-RE + rebar
Anchor size Tensile N Rec Shear V Rec 8 9.9 7.9 10 14.1 12.4 12 20.6 17.8 14 27.3 24.2 16 31.2 31.6 20 53.0 49.5 25 81.8 77.1 28 102.8 96.6 32 120.9 126.2 36 137.7 169.5 40 154.4 197.4
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
1 20
HIT-RE 500/1400/1
293
Anchor Systems
HIT-HY150 injection system Fast curing for concrete and natural stone.
Base material Concrete Hard natural stone Use Connectors Anchor rods Internally threaded sleeves Material Hilti HIT-HY 150 hybrid adhesive Features Fastenings without expansion pressure High loading User-friendly, odourless Small edge distances Complete system of matched components Fire Data Available
(330 ml)
(500 ml)
(1400 ml)
Base material temperature OC Tgel (min) Tcure (min) -5 90 360 0 45 180 5 25 90 20 6 50 30 4 40 40 2 30 The foil pack temperature must be at least +5OC
Technical data: HIT-HY 150 + HAS, HIT-HY 150 + HAS-R / HAS-HCR Recommended load, L rec (kN): concrete f ck,cube = 25 N/mm2 HIT-HY 150 + HAS
Anchor size Tensile N Rec Shear V Rec Tensile N Rec Shear V Rec M8 6.0 5.6 6.0 6.3 M10 8.0 9.0 8.0 10.1 M12 12.0 13.1 12.0 14.6 M16 15.3 24.7 25.3 27.7 M20 26.0 38.6 26.0 43.3 M24 32.4 55.6 32.4 62.3
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
2 0 40 2 20 1
Foil pack HY150/330/2 Foil pack HY150/330/0 Promo box HY 150/330/2 Foil pack HY150/500/2 Bulk pack HY150/500/1 Foil pack HY150/1400
1 25 20 1 20 1
s PLEASE ASK FOR DELIVERY DETAILS. 0800 886 100 | www.hilti.co.uk 1850 287 387 | www.hilti.ie Hilti. Outperform. Outlast.
294
Anchor Systems
Advantages Optimized application, comfortable and flexible For indoor and outdoor applications, as well as for use in dry and wet drilled holes Can be used at any time of year in a temperature range between 5 and +40 C Fastenings are free of expansion forces Non-bearing surfaces are effortlessly bridged High degree of fire resistance Mortar injection control: the user identifies when the correct mortar amount has been injected. Less mortar loss and lower costs per fastening point with full performance when HIT SC composite sieves are used Complete system of matched components
Flexible embedment depths and variable loads in spite of fewer parts: Hiltis unique, combinable, corrosion free, composite mesh sieve makes it possible!
HIT-HY 70/ 330/2 HIT-HY 70/ 330/1 HIT-HY 70/ 500/2 HIT-HY 70/1400/1
1 20 (promo version) 20 1
330 ml
500 ml
Zinc plated Zinc plated Zinc plated Zinc plated Stainless steel Stainless steel Stainless steel
20 20 10 10 20 10 10
1400 ml
HIT-HY 70 can also be used with HAS range - see page 297
HIT-AC rod
8 50 10 50 12 50 8 80 10 80 12 80
Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated
10 10 10 10 10 10
HIT-HY 70 can also be used with HIS-N range - see page 297
For further details on this system, including installation and animation, see www.hilti.co.uk/chy70 or www.hilti.ie/chy70 s PLEASE ASK FOR DELIVERY DETAILS.
295
7
Sieves for use in hollow brick/block
HIT-SC composite sieves
Diameter length (mm) Material rod dia. For Rod dia. For socket Packaging Ordering designation Item no.
12 50 12 85 16 50 16 85 18 50 18 80 22 50 22 85 26 125 26 200
Composite Composite Composite Composite Composite Composite Composite Composite Composite Composite
20 20 20 20 20 20 20 20 20 20
HIT-SC 12 50 HIT-SC 12 85 HIT-SC 16 50 HIT-SC 16 85 HIT-SC 18 50 HIT-SC 18 80 HIT-SC 22 50 HIT-SC 22 85 HIT-SC 26 125 HIT-SC 26 200
375979 375980 375981 375982 360485 360486 273662 284511 360487 360488
Meter-long sieves
Diameter length (mm) Material Packaging contents Ordering designation Item no.
50 50 TBA 25
296
Anchor Systems
A4 316
Stainless steel A4 SS316 (material 1.4401)
Ordering designation Item no.
10 10 5 5
HIS-N M 8 x 90 HIS-N M10 x 110 HIS-N M12 x 125 HIS-N M16 x 170
HIS-RN M 8 x 90 HIS-RN M10 x 110 HIS-RN M12 x 125 HIS-RN M16 x 170
HAS anchor rod, complete with hexagon nut and washer, with external drive hexagon
Connection thread Fastenable thickness (mm) Rod length (mm) Package contents Tightening torque, Steel zinc plated 5 microns thick (grade 5.8 / ISO 898 T1) Tinst.(Nm) Ordering designation Item no. Stainless steel A4-70 SS 316 (material 1.4401) Ordering designation Item no.
A4 316
M 8 M 8 M 8 M10 M10 M10 M10 M12 M12 M12 M12 M16 M16 M16 M16 M16
110 150 240 130 170 190 220 160 220 260 300 190 260 300 350 500
20 20 10 10 10 10 10 10 10 10 10 5 5 5 5 5
HAS M 8 x 110/ 14 HAS M 8 x 150/ 54 HAS M10 x 130/ 21 HAS M10 x 170/ 61 HAS M10 x 190/ 81 HAS M12 x 160/ 28 HAS M12 x 220/ 88 HAS M12 x 260/128 HAS M12 x 300/168 HAS M16 x 190/ 38 HAS M16 x 260/108 HAS M16 x 300/148 HAS M16 x 350/198 HAS M16 x 500/348
00066001 00259934 00066002 00259936 00259937 00066003 00259938 00259939 00259940 00066004 00259941 00259942 00259943 00259944
HAS-R M 8 x 110/ 14 HAS-R M 8 x 150/ 54 HAS-R M 8 x 240/114 HAS-R M10 x 130/ 21 HAS-R M10 x 170/ 61 HAS-R M10 x 190/ 81 HAS-R M10 x 220/114 HAS-R M12 x 160/ 28 HAS-R M12 x 220/ 88 HAS-R M12 x 260/128 HAS-R M12 x 300/168 HAS-R M16 x 190/ 38 HAS-R M16 x 260/108 HAS-R M16 x 300/148 HAS-R M16 x 350/198
00259945 00259946 00259947 00259948 00259949 00259950 00259951 00259952 00259953 00259758 00259759 00259954 00259955 00259760 00259956
HAS-E anchor rod, complete with hexagon nut and washer, with cone head
Connection thread Fastenable thickness (mm) Embedment depth (mm) Package contents Overall length (mm) Tightening torque Steel zinc plated5 microns thick (grade 5.8 / ISO 898 T1) Tinst.(Nm) Ordering designation Item no. Stainless steel A4-70 (material 1.4401) Ordering designation Item no.
A4 316
M8 14 80 M8 15 80 M8 114 80 M10 21 90 M10 61 90 M10 81 90 88 90 M10 28 110 M12 88 110 M12 128 110 M12 168 110 M12 M16 20 125 M16 38 125 M16 108 125 M16 148 125 M16 198 125 348 125 M16 48 170 M20 M20 68 170 108 170 M20 M20 158 170 208 170 M20 M24 54 210 60 240 M27 M30 70 270 80 300 M33 M36 90 330 100 360 M39 * (Grade 8.8 / ISO 898 T1)
20 10 10 20 10 10 10 20 10 10 10 10 20 10 10 10 10 10 10 10 10 10 10 4 4 4 4 4
110 150 240 130 170 190 220 160 220 260 300 170 190 260 300 350 500 240 260 300 350 400 290 340 380 420 460 500
15 15 15 30 30 30 30 50 50 50 50 100 100 100 100 100 100 160 160 160 160 160 240 270 300 1200 1500 1800
HAS-E M8 80/14 HAS-E M8 80/54 HAS-E M10 90/21 HAS-E M10 90/61 HAS-E M10 90/81 HAS-E M12 110/28 HAS-E M12 110/88 HAS-E M12 110/128 HAS-E M12 110/168 HAS-E M16 125/20 HAS-E M16 125/38 HAS-E M16 125/108 HAS-E M16 125/148 HAS-E M16 125/198 HAS-E M16 80/348 HAS-E M20 170/48 HAS-E M20 170/68 HAS-E M20 170/108 HAS-E M20 170/158 HAS-E M20 170/208 HAS-E M24 210/54 HAS-E M27 240/60 * HAS-E M30 270/70 * HAS-E M33 300/80 * HAS-E M36 330/90 * HAS-E M39 360/100 *
00332219 00333099 00332220 00333100 00333101 00332221 00333102 00333103 00333104 00333105 00332222 00333106 00333107 00333108 00333109 00332223 00333110 00333111 00333112 00333113 00332224 00333114 00333115 00333116 00333117 00333118
HAS-E-R M8 80/14 HAS-E-R M8 80/54 HAS-E-R M10 80/114 HAS-E-R M10 90/21 HAS-E-R M10 90/61 HAS-E-R M10 90/81 HAS-E-R M10 90/88 HAS-E-R M12 110/28 HAS-E-R M12 110/88 HAS-E-R M12 110/128 HAS-E-R M12 110/168 HAS-E-R M16 125/20 HAS-E-R M16 125/38 HAS-E-R M16 125/108 HAS-E-R M16 125/148 HAS-E-R M16 125/198 HAS-E-R M20 170/48 HAS-E-R M20 170/108 HAS-E-R M24 210/54 HAS-E-R M27 240/60 * HAS-E-R M30 270/70 * HAS-E-R M33 300/80 * HAS-E-R M36 330/90 * HAS-E-R M39 360/100 *
00333119 00333120 00333121 00333122 00333123 00333124 00333125 00333126 00333127 00333128 00333129 00333130 00333131 00333132 00333133 00333134 00333135 00333136 00333137 00333138 00333139 00333140 00333141 00333142
297
Anchor Systems
Dispensers
Manual dispensers
Designation Item no.
MD 2000 manual dispenser for 330 ml packs (dispenser only in cardboard box) MD 2000 tool kit for 330 ml packs (dispenser, brushes, blow-out pump in Hilti tool box) MD 2500 manual dispenser for 330 and 500 ml packs (dispenser only in cardboard box) MD 2500 tool kit for 330 and 500 ml packs (dispenser, brushes, blow-out pump in Hilti tool box) CB 200-P1 manual dispenser for HFX, silicone, mastic, etc. Battery dispensers
Designation
ED 3500 battery & dispenser kit for 330 and 500 ml packs dispenser, battery (SFB 126), charger (C7/36-ACS), brushes, blow-out pump in Hilti tool case ED 3500 battery dispenser kit for 330 and 500 ml packs dispenser, brushes, blow-out pump in Hilti tool case (without battery or charger) ED 3500 battery dispenser for 330 and 500 ml packs dispenseronly in cardboard box (without battery or charger) Pneumatic dispensers
Designation
% 03426146
&
Item no.
Hilti HIT-P 3000 F pneumatic dispenser for 330 ml packs Hilti HIT-P 3500 F pneumatic dispenser for 330 and 500 ml packs Hilti HIT-P 8000 D pneumatic dispenser for 1400 ml packs Spare foil pack holders Holder MD 2000 for 330ml packs Holder MD 2500 for 330 and 500ml packs Holder P 8000 D for 1400ml packs
Consisting of:
Accessories
Hole cleaning accessories
Designation Package contents Item no.
Blow-out pump Round brush with grip 13 mm dia. Round brush with grip 18 mm dia. Round brush with grip 28 mm dia. GA = thread connection Spare nozzles
Designation
1 1 1 1
Item no.
HIT-RE-M mixer nozzle for HIT-RE 500 and HY 70 (all sizes) and HY 150 (1400 ml only) HIT-M1 mixer nozzle for HY 150 (330 & 500 ml only) HFX-M mixer nozzle for HFX cartridges Roughening tools
Use to prepare diamond-drilled holes for HY 150
Designation Package contents
Item no.
1 1 1 1
298
Anchor Systems
HIT Profi System For heavy anchoring applications and the post-installation of rebars. Applications
n Unique and approved system for safe installation of rebar and anchoring
Advantages n Comprehensive sets of accessories for maximising your HIT performance and productivity gain
n
Great opportunity to customise your HIT installation equipment according to your application needs
Hilti HIT Premium rebar accessory set 1 s 384753 The Hilti HIT premium set for the rebar professionals who perform post-installation of rebars in the most challenging situations, with all the required accessories to post-install rebars up to 25 and 2500 mm in embedement depth. Content: case, installation instructions, installation report, drilling aid, compressed-air connector, blowing extension hoses and tubes, air nozzles DL 12-32 (for rebar 8-25), holders TE-Y and TE-C, brush extensions RBS, round steel brushes RB 12-32 (for rebar 8-25), injection extention hoses and tubes, piston plugs SZ 12-32 (for rebar 8-25), markers, thermometer, rebar saw
Product designation Unit/sales package Item no.
Hilti HIT Profi rebar accessory set 1 s 274888 The Hilti HIT set for those professionals who often encounter rebar installation in their daily business, with all the required equipment to post-install rebars up to 20 mm and 800 mm in embedement depth. Compact, versatile and complete to make best use of the Hilti HIT rebar system and gain productivity in the most common applications. Content: case, installation instructions, installation report, blow-out gun, blowing extension hoses, air nozzles DL 12-25 (for rebar 820), holders TE-Y and TE-C, brush extensions RBS, manual brush extension and handle, round steel brushes RB 12-25 (for rebar 8-20), manual dispenser MD 2500, injection extention hoses, piston plugs SZ 12-25 (for rebar 8-20)
Product designation Unit/sales package Item no.
Hilti HIT Profi anchor accessory set 1 s 384752 The Hilti HIT set for those professionals who would like to go beyond in their anchoring work with Hilti HIT, optimising the load bearing capacity of the system and reaching maximum productivity in the serial applications. Ideal for installation of anchoring elements up to 20 mm in diameter and 250 mm in embedement depth. Content: case, installation instructions, blow-out gun, holder TE-C, brush extension RBS 10/0.35, manual brush handle, round steel brushes RB 10-24 (for threaded rods M10-M20), manual dispenser MD 2500 Hilti HIT Profi accessoriesaft
Description Product name Unit/sales package Item no.
Empty case Empty case Installation instructions Installation report - Internat. version Drilling aid Protective goggles
1 1 1 5 1 1
s s s s s s
Overhead wedge HIT-OHW Overhead cup HIT-OHC1 HIT-OHC2 Overhead cup *Note: to be used together with the relevant piston plugs s PLEASE ASK FOR DELIVERY DETAILS.
100 10 10
299
Anchor Systems
=
060579
Blow-out pump Blow-out gun Extension hose for blow-out gun Extension hose for blow-out gun Connecting piece for air compressor Coupler for blowing extensions Extension hose for HIT-DL A Extension tube Extension tube Extension hose Air nozzle Air nozzle Air nozzle Air nozzle Air nozzle Air nozzle Air nozzle
G " HIT-DL 10/0.8 HIT-DL 16/0.8 HIT-DL A HIT-DL K HIT-DL V10/1 HIT-DL B HIT-VL 16/0.7 HIT-VL 16 HIT-DL 12 HIT-DL 14 HIT-DL 16 HIT-DL 18 HIT-DL 20 HIT-DL 25 HIT-DL 32
10 16 16 10 16 16 16 12 14 16 18 20 24 32
1 1 1 1 1 10 1 1 10 10 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 10 10 m 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
s s s s s s s s s s s s s s s s s s s s
= 381215 % 038251 & 038252 ( 336643 038250 ) 336644 + 371714 336646 038249 / 371715 371716 371717 : 371718 371719 371720 371721 238727 $ 229138 263439 | 263437 263438 336645 371722 Q 380917 336548 336549 336550 336551 336552 370774 380918 336553 W 380919 380920 336554 380921 382259 382260 382261 382262 382264 382265 E 382266 R 024632 T 336646 038249 Z 335021 U 335022 335023 335024 335025 335026 380922 380923 335027 380924 I 380925 335028 380926 382267 380927 380928 380929 380930 382268 O 382269
% &
(
Hilti HIT Profi accessories for brushingaft Manual brush extension for round steel brush HIT-RBV 0.3 Manual brush handle for round steel brush HIT-RBH 0.3 Holder for brush extension RBS TE-Y Holder for brush extension RBS TE-C Holder for brush extension RBS TE-T Brush extension for round steel brush HIT-RBS 10/0.7 0.7 Brush extension for round steel brush HIT-RBS-10/0.35 0.35 HIT-RB 10 10 Round steel brush Round steel brush HIT-RB 12 12 Round steel brush HIT-RB 14 14 HIT-RB 16 16 Round steel brush Round steel brush HIT-RB 18 18 Round steel brush HIT-RB 20 20 Round steel brush HIT-RB 22 22 Round steel brush HIT-RB 24 24 Round steel brush HIT-RB 25 25 Round steel brush HIT-RB 28 28 HIT-RB 30 30 Round steel brush Round steel brush HIT-RB 32 32 Round steel brush HIT-RB 35 35 Round steel brush HIT-RB 37 37 HIT-RB 40 40 Round steel brush Round steel brush HIT-RB 42 42 HIT-RB 45 45 Round steel brush Round steel brush HIT-RB 47 47 HIT-RB 52 52 Round steel brush HIT-RB 55 55 Round steel brush Hilti HIT Profi accessories for injectionaft 9 1 Extension hose HIT-VL 9/1.0 Extension tube HIT-VL 16/0.7 16 0.7 Extension hose HIT-VL 16 16 Coupler for injection extensions HIT-VL K 16 Piston Plug HIT-SZ 12 12 Piston Plug HIT-SZ 14 14 Piston Plug HIT-SZ 16 16 Piston Plug HIT-SZ 18 18 Piston Plug HIT-SZ 20 20 Piston Plug HIT-SZ 22 22 HIT-SZ 24 24 Piston Plug Piston Plug HIT-SZ 25 25 Piston Plug HIT-SZ 28 28 HIT-SZ 30 30 Piston Plug Piston Plug HIT-SZ 32 32 Piston Plug HIT-SZ 35 35 Piston Plug HIT-SZ 37 37 HIT-SZ 40 40 Piston Plug Piston Plug HIT-SZ 42 42 HIT-SZ 45 45 Piston Plug Piston Plug HIT-SZ 47 47 HIT-SZ 52 52 Piston Plug Piston Plug HIT-SZ 55 55 0800 886 100 | www.hilti.co.uk 1850 287 387 | www.hilti.ie
$ |
s s s s s s s s
s s s s s s s s
T Z I
300
Anchor Systems
Features nExceptional load capacity loads comparable to cast in suitable for tensile zone / dynamic loading nSimple installation no diamond drilling / cutting equipment nSmall edge distance and spacing
HDA-TF / HDA-PF
n teel grade 8.8, sherardised to min. 53 mic. S n 10 M16 M
Fastenings in damp conditions, e.g. in basements, cellars, shafts, etc.
HDA-TR / HDA-PR
n 4-80 stainless steel anchor rod A
nM10 M16 Fastenings outside exposed to long lasting condensation,e.g. tunnels, underground garages / parking lots, noisebarriers, bridge connections, etc.
1. Drill the hole with the stop drill bit and blow out the dust with a pump
2. Using the setting tool mounted on a hammer drill, set the anchor until the setting mark on the anchor rod becomes visible
hef
tfix dh
Technical data: HDA-P, HDA-T, HDA-PR, HDA-TR Recommended load, L rec (kN): concrete f ck,cube = 25 N/mm2 Uncracked concrete Cracked concrete
HDA-P HDA-T HDA-PR HDA-TR Anchor size Tensile N Rec Shear V Rec Tensile N Rec Shear V Rec Tensile N Rec Shear V Rec Tensile N Rec Shear V Rec M10 21.9 12.6 21.9 30.9 20.5 12.4 20.5 38.1 M12 31.9 17.1 31.9 38.1 29.9 18.3 29.9 46.7 M16 60.0 35.4 60.0 66.6 56.3 33.9 56.3 81.8 M20 91.1 56.0 91.1 100.0 M10 11.9 12.6 11.9 30.9 11.9 12.4 11.9 38.1 M12 16.7 17.1 16.7 38.1 16.7 18.3 16.7 46.7 M16 35.7 35.4 35.7 66.6 35.7 33.9 35.7 81.8 M20 45.3 56.0 45.3 100.0
do
Tinst SW
tfix dh
do
Tinst SW
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
301
Anchor Systems
Zivilschutz
20 21 20 107 30 23 22 135 23 22 135 50 32 30 203 40 32 30 203 60 40 37 266 50 40 37 266 100 * Please ask for delivery details.
17 19 19 24 24 30 30
12 8 8 4 4 2 2
HDA... 20-M10100/ 20 HDA... 22-M12125/ 30 HDA... 22-M12125/ 50 HDA... 30-M16190/ 40 HDA... 30-M16190/ 60 HDA... 37-M20250/ 50 HDA... 37-M20250/100
20 30 50 40 60 50 100
12 14 14 18 18 22 22
20 22 22 30 30 37 37
17 19 19 24 24 30 30
12 8 8 4 4 2 2
HDA... 20-M10100/ 20 HDA... 22-M12125/ 30 HDA... 22-M12125/ 50 HDA... 30-M16190/ 40 HDA... 30-M16190/ 60 HDA... 37-M20250/ 50 HDA... 37-M20250/100
Required tools
Anchor
Anchor size Packaging contents (pcs)
Setting tool
Packaging contents (pcs) Ordering designation Item no.
HDA-T/TF/TR 20-M10100/20 HDA-T/TF/TR 20-M10100/20 HDA-T/TF/TR 22-M12125/30 HDA-T/TF/TR 22-M12125/30 HDA-T/TF/TR 22-M12125/50 HDA-T/TF/TR 22-M12125/50 HDA-T/TF/TR 30-M16190/40 HDA-T/TF/TR 30-M16190/60 HDA-T 37-M20250/50 HDA-T 37-M20250/100 HDA-P/PF/PR 20-M10100/20 HDA-P/PF/PR 20-M10100/20 HDA-P/PF/PR 22-M12125/30 HDA-P/PF/PR 22-M12125/30 HDA-P/PF/PR 22-M12125/50 HDA-P/PF/PR 22-M12125/50 HDA-P/PF/PR 30-M16190/40 HDA-P/PF/PR 30-M16190/60 HDA-P 37-M20250/50 HDA-P 37-M20250/100
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
TE-C-HDA-B 20120 TE-Y-HDA-B 20120 TE-C-HDA-B 22155 TE-Y-HDA-B 22155 TE-C-HDA-B 22175 TE-Y-HDA-B 22175 TE-Y-HDA-B 30230 TE-Y-HDA-B 30250 TE-Y-HDA-B 37300 TE-Y-HDA-B 37350 TE-C-HDA-B 20100 TE-Y-HDA-B 20100 TE-C-HDA-B 22125 TE-Y-HDA-B 22125 TE-C-HDA-B 22125 TE-Y-HDA-B 22125 TE-Y-HDA-B 30190 TE-Y-HDA-B 30190 TE-Y-HDA-B 37250 TE-Y-HDA-B 37250
00332090 00237450 00332092 00237452 00332093 00237453 00332098 00332099 00339271 00339272 00332089 00237449 00332091 00237451 00332091 00237451 00332097 00332097 00339270 00339270
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
TE-C-HDA-ST 20-M10 TE-Y-HDA-ST 20-M10 TE-C-HDA-ST 22-M12 TE-Y-HDA-ST 22-M12 TE-C-HDA-ST 22-M12 TE-Y-HDA-ST 22-M12 TE-Y-HDA-ST 30-M16 TE-Y-HDA-ST 30-M16 TE-Y-HDA-ST 37-M20 TE-Y-HDA-ST 37-M20 TE-C-HDA-ST 20-M10 TE-Y-HDA-ST 20-M10 TE-C-HDA-ST 22-M12 TE-Y-HDA-ST 22-M12 TE-C-HDA-ST 22-M12 TE-Y-HDA-ST 22-M12 TE-Y-HDA-ST 30-M16 TE-Y-HDA-ST 30-M16 TE-Y-HDA-ST 37-M20 TE-Y-HDA-ST 37-M20
00331843 00287133 00331844 00287134 00331844 00287134 00331846 00331846 00339269 00339269 00331843 00287133 00331844 00287134 00331844 00287134 00331846 00331846 00339269 00339269
Ordering designation
Item no.
Ordering designation
Item no.
HDA-P 20-M10100/20 HDA-P 22-M12125/30 HDA-P 22-M12125/50 HDA-P 30-M16190/40 HDA-P 30-M16190/60 HDA-P 37-M20250/50 HDA-P 37-M20250/100
16 25.5 45.5 37 57 47 97
HDA-T 20-M10100/20 HDA-T 22-M12125/30 HDA-T 22-M12125/50 HDA-T 30-M16190/40 HDA-T 30-M16190/60 HDA-T 37-M20250/50 HDA-T 37-M20250/100
20 30 50 40 60 50 100
Dynamic Set M10 Dynamic Set M12 Dynamic Set M12 Dynamic Set M16 Dynamic Set M16 Dynamic Set M20 Dynamic Set M20
For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387 0800 886 100 | www.hilti.co.uk 1850 287 387 | www.hilti.ie Hilti. Outperform. Outlast.
302
Anchor Systems
Application areas n uclear power projects N nTelecom n Heavy industrial n Infrastructure Material
nSteel strength 8.8 with rolled thread, zinc plating at least 5 microns thick n A4 stainless steel (material 1.4401 / AISI 316)
Main features
n Black plastic section
Technical data: HSL-3 Recommended load, L rec (kN): concrete f ck,cube = 25 N/mm2 Uncracked concrete Cracked concrete
Anchor size Tensile N Rec Shear V Rec M8 11.1 17.8 M10 14.0 28.1 M12 17.2 41.0 M16 24.0 57.8 M20 33.5 81.1 M24 44.1 101.4 M8 4.8 17.8 M10 7.6 28.1 M12 12.3 41.0 M16 17.1 57.8 M20 24.0 81.1 M24 31.5 101.4
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
303
Anchor Systems
12 12 15 15 18 18 24 24 28 28 32 32
98 118 110 130 131 156 153 178 183 213 205 235
20 40 20 40 25 50 25 50 30 60 30 60
13 13 17 17 19 19 24 24 30 30 36 36
40 40 20 20 20 10 10 10 6 6 4 4
HSL-3 M 8/20 HSL-3 M 8/40 HSL-3 M 10/20 HSL-3 M 10/40 HSL-3 M 12/25 HSL-3 M 12/50 HSL-3 M 16/25 HSL-3 M 16/50 HSL-3 M 20/30 HSL-3 M 20/60 HSL-3 M 24/30 HSL-3 M 24/60
00371775 00371776 00371778 00371779 00371781 00371782 00371784 00371785 00371787 00371788 00371790 00371791
Vrec (kN)
(kN)
Package contents
Ordering designation
Item no.
12 15 18
91 102 121
80 90 105
20 20 25
25 50 80
40 20 20
Nrec
Vrec
(kN)
(kN)
Package contents
Ordering designation
Item no.
15 18 24 28
20 20 25 25 30
13 17 19 24 30
25 40 80 120 200
40 20 20 10 6
HSLG-R M 8/20 HSLG-R M 10/20 HSLG-R M 12/25 HSLG-R M 16/25 HSLG-R M 20/30
For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387 0800 886 100 | www.hilti.co.uk 1850 287 387 | www.hilti.ie Hilti. Outperform. Outlast.
304
Anchor Systems
Tinst
n Fire resistance
Technical data: HSC-I, HSC-IR, HSC-A, HSC-A Recommended load, L rec (kN): concrete f ck,cube = 25 N/mm2 Uncracked concrete Cracked concrete
l
HSC-I
Tinst
do tfix
HSC-IR
h1
HSC-A HSC-A
Anchor size Tensile N Rec Shear V Rec Tensile N Rec Shear V Rec Anchor size Tensile N Rec Shear V Rec Tensile N Rec Shear V Rec
M8x40 M10x50 M10x60 M12x60 M6x40 6.1 8.5 11.1 11.1 4.3 7.0 8.7 8.7 10.4 4.6 6.1 8.5 11.1 11.1 4.3 4.9 6.1 6.1 7.4 3.2 M8x40 M8x50 M10x40 M12x60 6.1 8.5 6.1 11.1 8.3 8.3 13.3 19.3 6.1 8.5 6.1 11.1 5.9 5.9 9.3 13.5
M8x40 M10x50 M0x50 M12x60 4.3 6.0 8.0 8.0 7.0 8.7 8.7 10.4 4.3 6.0 8.0 8.0 4.9 6.1 6.1 7.4 M8x40 M8x50 M10x40 M12x60 4.3 4.3 4.3 8.0 8.3 8.3 13.3 19.3 4.3 6.0 4.3 8.0 5.9 5.9 9.3 13.5
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
305
Anchor Systems
HSC-A
Hole dia., d (mm)
o
rec
rec
(kN)
(kN)
Package contents
Ordering designation
Item no.
14 14 16 18
46 56 46 68
15 15 20 20
13 13 17 19
10 10 20 30
A4
25 25 25 20
HSC-AR
Hole dia., d (mm)
o
rec
rec
(kN)
(kN)
Package contents
Ordering designation
Item no.
14 14 16 18
46 56 46 68
15 15 20 20
13 13 17 19
10 20 10 30
25 25 25 20
HSC-I
Hole dia., d (mm)
o
rec
rec
(kN)
(kN)
Package contents
Ordering designation
Item no.
14 16 18 18 20
46 46 56 56 68
10 10 20 30 30
A4
25 25 25 25 25
HSC-I M 640 HSC-I M 840 HSC-I M 1050 HSC-I M 1060 HSC-I M 1260
HSC-IR
Hole dia., d (mm)
o
rec
rec
(kN)
(kN)
Package contents
Ordering designation
Item no.
14 16 18 18 20
46 46 56 56 68
10 10 20 30 30
25 25 25 25 25
7
TE 25 Ordering designation Item no.
HSC-A (R)
HSC-I (R)
14 14 16 18 18 20
l l l
TE-C HSC-B 1440 TE-C HSC-B 1450 TE-C HSC-B 1640 TE-C HSC-B 1850 TE-C HSC-B 1860 TE-C HSC-B 2060
M 8 M 10 M 12
M 6 M 8 M 10 M 12
306
Anchor Systems
VdS
G 4930030
EDELSTAHL
Stainless steel
ALLGEMEIN
BAUAUFSICHTLICH
ZUGE LASSEN
FM
Factory Manual
Versions offered: n HST zinc plated (min. 5 microns) nHST-R A4 stainless steel (DIN 1.4401 / AISI 316) n HST-HCR DIN 1.4529 high corrosion resistant Areas of application: n Base material: concrete in the tensile and compression zone, hard natural stone n Fastening through in-place parts e. g. angles, tracks, channels, beams etc. n Special programme in HCR material: for applications where high corrosion resistance is required, like street tunnels or swimming pools (high concentration of chlorides) Approvals: n European technical approval (ETA) Option 1 for concrete in the tensile and compression zone (zinc plated M8M24, stainless M8M24) the anchor can therefore be used in all CE-countries n German approval (DIBt) for material 1.4529 high corrosion resistant (HCR), diameters M8M16 n Fire resistance The anchor can be used where fire resistance is required (approved by the IBMB Germany all offered sizes and materials) n Shock approval Switzerland BZS for civil defence shelters all offered sizes and materials n Sprinkler systems approved by VDS and FM Characteristics: n Embedment depth marked (black ring) to ensure that the fastening is done right on site n Nut and washer pre-assembled for time saving on site Approved for cracked concrete The anchor is approved for applications in the tensile zone of concrete according to the European building codes (CE) and can therefore be used in the tensile and compression zone
Edge and spacing distance The small permitted edge and spacing distances allow design flexibility, even with narrow structural members.
Cold-formed
Due to the manufacturing process (cold-forming technology), the steel material remains ductile. The result is an anchor which allows alignments without breaking.
307
Anchor Systems
Technical data: HST, HST-R Recommended load, L rec (kN): concrete f ck,cube = 25 N/mm2 Uncracked concrete Cracked concrete HST
Anchor size Tensile N Rec Shear V Rec Anchor size Tensile N Rec Shear V Rec M8 3.6 7.4 M8 4.3 7.4 M10 7.6 11.4 M10 7.6 11.4 M12 9.5 17.1 M12 9.5 17.1 M16 16.7 28.6 M16 16.6 27.5 M20 23.8 29.6 M20 23.8 39.7 M24 28.6 44.8 M24 28.6 57.1 M8 2.0 7.4 M8 2.4 7.4 M10 4.3 11.4 M10 4.3 11.4 M12 5.7 17.1 M12 5.7 17.1 M16 9.5 28.6 M16 11.9 27.5 M20 14.3 29.6 M20 14.3 39.7 M24 19.0 44.8 M24 19.0 57.1
HST-R
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
EDELSTAHL
Stainless steel
8 75 8 95 8 115 10 90 10 110 10 130 12 115 12 145 12 185 12 215 12 235 12 255 16 140 16 165 16 215 16 255 16 295 20 170 20 200 20 260 24 200 24 230 * HST-R packaging contents: 50
100 * 100 * 50 50 50 25 25 25 25 25 25 25 12 12 12 12 12 5 5 5 5 5
HST M 8/ 10 HST M 8/ 30 HST M 8/ 50 HST M10/ 10 HST M10/ 30 HST M10/ 50 HST M12/ 20 HST M12/ 50 HST M12/ 90 HST M12/120 HST M12/140 HST M12/160 HST M16/ 25 HST M16/ 50 HST M16/100 HST M16/140 HST M16/180 HST M20/ 30 HST M20/ 60 HST M20/130 HST M24/ 30 HST M24/ 60
00371581 00371582 00371583 00371584 00371585 00371586 00371587 00371588 00371589 00371590 00371591 00371592 00371593 00371594 00371595 00371596 00371597 00371598 00371599 00274697 00371601 00371602
00376039 00376041 00376042 00376043 00376044 00376045 00376047 00376048 00376049 00376050 00376051 00376052 00376053 00376054 00376055 00376056 00376057 00376058 00376059
HST-HCR, stainless steel (HCR, high corrosion resistant material as per DIN 1.4529)
Hole dia., (do) mm Anchor length, (l) mm Max. fastenable thickness, (tfix) mm Packaging contents (pcs) Ordering designation Item no. Stainless (HCR 1.4529)
10 30 10 30 20 50 25 50
20 20 20 20 10 10 10 10
HST-HCR M 8/10 HST-HCR M 8/30 HST-HCR M10/10 HST-HCR M10/30 HST-HCR M12/20 HST-HCR M12/50 HST-HCR M16/25 HST-HCR M16/50
s s s s s s s s
Ordering designation
Item no.
TE-C TE-C
150 300
1 1
00337918 00337919
s PLEASE ASK FOR DELIVERY DETAILS. For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387
308
Anchor Systems
EDELSTAHL
Stainless steel
Versions offered: n HSA zinc plated (min. 5 microns) n HSA-F hot dipped galvanized (ISO 1461, 45 microns) n HSA-R A4 stainless steel (DIN 1.4401 / AISI 316) Areas of application: n Base material: concrete in the compression zone n Versatile fastening through in-place parts like wood beams, metal sections, columns, brackets, etc. n Offered in a variety of length (to fit for every specific thickness of the fastening part) and materials (to match specific corrosion requirements) Approvals: n European technical approval (ETA) Option 8 for concrete in the compression zone (zinc plated M6M20, stainless M6M12) the anchor can therefore be used in all CE-countries
n
H ead marking
Ductilityofthe steel
T woembedment depths
Fire resistance The anchor can be used where fire resistance proof is required (for the zinc plated and stainless version approved by the IBMB Germany) Characteristics: n Long thread, offering flexibility for special applications n Two embedment depths marked, to ensure that the fastening is done right on site Standard embedment: blue ring Reduced embedment: thread end n Nut and washer pre-assembled for time saving on site
Technical data: HSA, HSA-R, HSA-F - Uncracked concrete Recommended load, L rec (kN): concrete f ck,cube = 25 N/mm2 Standard embedment depth Reduced embedment depth HSA
Anchor size Tensile N Rec Shear V Rec M6 2.4 2.9 M6 2.4 2.9 M6 2.4 2.9 M8 M10 M12 M16 Standard anchorage depth 5.7 7.6 11.9 18.5 4.4 7.1 10.2 19.1 M8 M10 M12 M16 Standard anchorage depth 4.8 4.1 8.5 15.4 5.2 8.1 11.9 22.4 M8 M10 M12 M16 Standard anchorage depth 5.7 7.6 11.9 18.5 4.4 7.1 10.2 19.1 M20 25.1 29.8 M20 17.5 35.0 M20 25.1 29.8 M6 2.0 2.9 M6 1.4 2.8 M6 2.0 2.9 M8 M10 M12 M16 Reduced anchorage depth 4.3 5.7 8.5 12.3 4.4 7.1 10.2 19.1 M8 M10 M12 M16 Reduced anchorage depth 3.0 4.1 8.5 9.1 5.2 8.1 11.9 22.4 M8 M10 M12 M16 Reduced anchorage depth 4.3 5.7 8.5 12.3 4.4 7.1 10.2 191 M20 16.5 29.8 M20 13.2 35.0 M20 16.5 29.8
HSA-R
Anchor size Tensile N Rec Shear V Rec
HSA-F
Anchor size Tensile N Rec Shear V Rec
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
309
Anchor Systems
6 6 6 6 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 12 12 12 16 16 16 16 16 20 20
50 65 85 100 57 75 92 115 137 68 90 108 120 140 80 100 120 150 180 220 240 300 100 120 140 190 240 125 170
A C D E B C E G H C E F G I D E G I L O P S E G I L P G K
HSA M 6 50/ / 5 HSA M 6 65/ 10/ 20 HSA M 6 85/ 30/ 40 HSA M 6100/ 45/ 55 HSA M 8 57/ / 5 HSA M 8 75/ 10/ 23 HSA M 8 92/ 27/ 40 HSA M 8115/ 50/ 63 HSA M 8137/ 72/ 85 HSA M10 68/ / 5 HSA M10 90/ 20/ 25 HSA M10108/ 37/ 45 HSA M10120/ 50/ 57 HSA M10140/ 70/ 77 HSA M12 80/ / 5 HSA M12100/ 5/ 25 HSA M12120/ 25/ 45 HSA M12150/ 55/ 75 HSA M12180/ 85/105 HSA M12220/125/145 HSA M12240/145/165 HSA M12300/205/225 HSA M16100/ / 5 HSA M16120/ 5/ 25 HSA M16140/ 25/ 45 HSA M16190/ 75/ 95 HSA M16240/125/145 HSA M20125/ / 10 HSA M20170/ 30/ 55
00255830 00255831 00255832 00255833 00255834 00255835 00255836 00255837 00255838 00255839 00255840 00255841 00255842 00255843 00255844 00255845 00255846 00255847 00255848 00255849 00255850 00255851 00255852 00255853 00255854 00255855 00255856 00255857 00255858
00338260 00337121 00337122 00337123 00337124 00337125 00337126 00337127 00337128 00337129 00337130 00337131 00337132 00337133 00338261 00337134 00337135 00337136 00337137
00332183 00332184 00332185 00332186 00332187 00332188 00332189 00332190 00332191 00332192 00332193 00332194 00332195 00337116 00337117 00337118 00337119 00337120
TE-C TE-C
150 300
1 1
00337918 00337919
For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387
310
Anchor Systems
ALLGEMEIN
BAUAUFSICHTLICH
ZUGE LASSEN
G 4930030
Areas of application: n Base material: concrete in the compression zone, hard natural stone n Fastening medium loads with bolts or threaded rods n Optimum solution for serial fastenings in suspended ceilings, pipe suspensions, machine fixing etc. n Ideal for setting in the undersides of cavity ceilings n Ideal for setting into Bison precast hollow units Approvals: n Fire resistance: The anchor can be used where fire resistance is Low-strength base High-strength base Characteristics:
material (fully set) material (fully set)
Flared end For accurate setting flush with the surface, independent of hole depth.
Full expansion Cone design permits the full expansion of the anchor in both low-strength and high-strength material. No thread damage when hammering the anchor into the hole. Easy setting.
Visual verification Visual verification of full expansion. The setting tool leaves a mark on the flared end that indicates proper expansion. Increased security.
Manual setting tool With ergonomic hand guard for better grip, size gauge for quick check that the right tool is used and polygonal top that protects from injuries.
BAUAUFSICHTLICH
ZUGE LASSEN
SOCOTEC
VdS
G 4930030
Versions offered: n HKD-E: zinc plated (min. 8 microns) Approvals: n French approval (Socotec): For fastenings in the compression zone n Fire resistance: The anchor can be used where fire resistance is required Characteristics:
No flared end No flared end for easy setting in greater depth.
Areas of application: n Base material: concrete in the compression zone, hard natural stone n Fastening medium loads with bolts or threaded rods n Ideal for through fastening applications
Areas of application: n Base material: concrete in the compression zone, hard natural stone n fastening drilling rig baseplates For Characteristics: n Outside diameter of 16 mm for higher holding power n Higher torque applicable compared to standard flush anchors n No flared end for easy setting in greater depth n Cone design permits the full expansion of the anchor in both lowstrength and high-strength material. No thread damage when hammering the anchor into the hole. Easy setting
311
Anchor Systems
Technical data: HKD-S Recommended load, L rec (kN): f ck,cube = 25 N/mm2 HKD-S
Anchor size Tensile N Rec Shear V Rec M6x25 2.1 2.1 M6x30 3.3 2.1 M8x30 3.3 3.9 M8x40 M10x30 M10x40 M12x50 M16x65 M20x80 3.6 3.3 5.1 7.1 12.6 17.2 3.9 4.2 4.6 8.1 12.5 19.9
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
HKD-S M 6 25 100 00242861 HKD-S M 8 301) 100 00242866 HKD-S M 8 40 50 00242867 HKD-S M10 301) 100 00243737 HKD-S M10 40 50 00242869 HKD-S M12 50 50 00242871 HKD-S M16 65 25 00242873 HKD-S M20 80 25 00242875
100 100 50 50 25 25
10 12 15 20
30 40 50 65
33 43 53 70
100 50 50 25
M12
16
50
53
HKD-D M1250 HSD-M mechanical setting tool HSD-M M 6 25 HSD-M M 8 30 HSD-M M 8 40 HSD-M M10 30 HSD-M M10 40 HSD-M M12 50 HSD-M M16 65 HSD-M M20 80
50
00252961
Item no.
HKD M 6 25 HKD M 8 30 HKD M 8 40 HKD M10 30 HKD M10 40 HKD M12 50 HKD M16 65 HKD M20 80 Note: HSD-M M6 to M12: TE-C connection HSD-M M16 to M20: TE-Y connection
HSD-G M 6 25 HSD-G M 8 30 HSD-G M 8 40 HSD-G M10 30 HSD-G M10 40 HSD-G M12 50 HSD-G M16 65 HSD-G M20 80
HSD-G
For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387
TE15
HSD-M
312
Anchor Systems
HLC 6.5 3 25/5 HLC 6.5 3 40/20 HLC 6.5 3 60/40 HLC 8 3 40/10 HLC 8 3 55/25 HLC 8 3 70/40 HLC 8 3 85/55 HLC 10 3 40/5 HLC 10 3 50/15 HLC 10 3 60/25 HLC 10 3 80/45 HLC 10 3 100/65 HLC 12 3 55/15 HLC 12 3 75/35 HLC 12 3 100/60 HLC 16 3 60/10 HLC 16 3 100/50 HLC 16 3 140/90 HLC 20 3 80/25 HLC 20 3 115/60 HLC 20 3 150/95 * old sleeve design
M5 M5 M5 M6 M6 M6 M6 M8 M8 M8 M8 M8 M 10 M 10 M 10 M 12 M 12 M 12 M 16 M 16 M 16
5 20 40 10 25 40 55 5 15 25 45 65 15 35 60 10 50 90 25 60 95
385811 385812 385813 385814 385816 385817 385818 385819 385820 385822 385823 385824 385825 385827 385829 385830 385831 385832 385833 * 385834 * 385835 *
HLC Sleeve anchor with Hexagonal Head HLC-H 8 3 40/10 HLC-H 8 3 55/25 HLC-H 8 3 70/40 HLC-H 10 3 40/5 HLC-H 10 3 60/25 HLC-H 10 3 80/45 HLC-H 10 3 100/65 HLC-H 12 3 55/15 HLC-H 12 3 75/35 HLC-H 12 3 100/60 HLC-H 16 3 60/10 HLC-H 16 3 100/50 HLC-H 16 3 140/90 M6 M6 M6 M8 M8 M8 M8 M10 M10 M10 M12 M12 M12 40 55 70 40 60 80 100 55 75 100 60 100 140 10 25 40 5 25 45 65 15 35 60 10 50 90 8 8 8 10 10 10 10 12 12 12 16 16 16 100 100 100 50 50 50 50 50 50 25 10 15 10 385836 385838 385840 385841 385842 385845 385847 385848 385849 385852 385853 385854 385855
313
Anchor Systems
HLC-SK 6.5 3 45/20 HLC-SK 6.5 3 65/40 HLC-SK 6.5 3 85/60 HLC-SK 8 3 60/25 HLC-SK 8 3 75/40 HLC-SK 8 3 90/55 HLC-SK 10 3 45/5 HLC-SK 10 3 85/45 HLC-SK 10 3 105/65 HLC-SK 10 3 130/95 HLC-SK 12 3 80/35
M5 M5 M5 M6 M6 M6 M8 M8 M8 M8 M10
45 65 85 60 75 90 48 85 105 130 80
20 40 60 25 40 55 5 45 65 95 35
385856 385857 385858 385859 385860 385861 385862 385863 385864 385865 385866
HLC Sleeve anchor with rounded head HLC-L 10 3 50/15 HLC-L 10 3 60/25 HLC-L 10 3 80/45 HLC-L 10 3 100/65 M8 M8 M8 M8 50 60 80 100 15 25 45 65 10 10 10 10 50 50 50 50 385867 385868 385869 385870
M6 M8 M12 M12
70 80 160 200
8 10 16 16
50 50 10 15
HLC Sleeve anchor with tire wire HLC-T 6.5 3 25 M5 30 6.5 50 385877
36 35 48 100 160
8 10 12 16 16
100 100 50 10 10
HLC 8 3 40/10 HLC 10 3 50/15 HLC 12 3 55/15 HLC 12 3 75/35 HLC-H 8 3 55/25 HLC-H 10 3 60/25 HLC-H 10 3 80/45 HLC-H 12 3 75/35
40 50 55 75 55 60 80 75
10 15 15 35 25 25 45 35
8 10 12 12 8 10 10 12
314
Anchor Systems
Basic loading data (for a single anchor) All data in this section applies to n cracked and non-cracked concrete: as specified in the table n no edge distance, spacing and other influences n correct setting
HUS-H
HUS-H 10.5 screw anchor with hexagon head 13 mm AF, 17.5 mm washer dia.
Drill bit nom. dia., d0 (mm) Anchor length, ls (mm) Embedment depth, Packaging standard minimum contents hnom (mm) hnom (mm) (pcs) Ordering designation Item no.
8 8 8 8 8 8 8
60 60 60 60 60 60
50 50 50 50 50 50 50
50 50 50 50 50 50 50
HUS-H 10.555//5 HUS-H 10.565/5/15 HUS-H 10.575/15/25 HUS-H 10.590/30/40 HUS-H 10.5110/50/60 HUS-H 10.5130/70/80 HUS-H 10.5150/90/100
HUS-H 12.5 screw anchor with hexagon head 15 mm AF, 20.5 mm washer dia.
10 10 10 10 10 10 10 65 75 85 100 120 140 160 70 70 70 70 70 70 60 60 60 60 60 60 60 50 50 50 50 50 50 50 HUS-H 12.565//5 HUS-H 12.575/5/15 HUS-H 12.585/15/25 HUS-H 12.5100/30/40 HUS-H 12.5120/50/60 HUS-H 12.5140/70/80 HUS-H 12.5160/90/100 00335089 00335090 00335091 00335092 00335093 00335094 00335095
HUS-H 16.5 screw anchor with hexagon head 21 mm AF, 30 mm washer dia.
14 14 14 14 80 115 135 160 90 90 90 90 70 70 70 70 16 16 16 16 HUS-H 16.580///10 HUS-H 16.5115/5/25/45 HUS-H 16.5135/25/45/65 HUS-H 16.5160/50/70/90 00377989 00377990 00377991 00377992
Technical data: HUS-H Recommended load, L rec (kN): concrete f ck,cube = 25 N/mm2 Uncracked concrete Cracked concrete
Anchor size hmon Tensile N Rec Shear V Rec 10.5
60
10.5
50
12.5
70
12.5
60
16.5
110
16.5
90
16.5
70
10.5
60
10.5
50
12.5
70
12.5
60
16.5
90
4.5 7.3
3.3 7.3
5.9 10.3
4.8 10.3
20.0 27.0
16.2 26.2
10.4 24.6
2.5 7.3
1.5 7.3
3.5 10.3
2.5 10.3
6.8 26.2
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387 www.hilti.co.uk | 0800 886 100 www.hilti.ie | 1850 287 387
315
Anchor Systems
HUS-HF 12.5 screw anchor with hexagon head 15 mm AF, 20.5 mm washer dia.
Drill bit nom. dia., d0 (mm) Anchor length, ls (mm) Embedment depth, deep standard minimum hnom (mm) hnom (mm) hnom (mm) Packaging contents (pcs) Ordering designation Item no.
10 10 10 10 10
65 75 85 100 120
70 70 70 70
60 60 60 60 60
50 50 50 50 50
HUS-HF 12.5 65//5 HUS-HF 12.5 75/5/15 HUS-HF 12.5 85/15/25 HUS-HF 12.5 100/30/40 HUS-HF 12.5 120/50/60
HUS-HF 16.5 screw anchor with hexagon head 21 mm AF, 30 mm washer dia.
Drill bit nom. dia., d0 (mm) Anchor length, ls (mm) Embedment depth, deep standard minimum hnom (mm) hnom (mm) hnom (mm) Packaging contents (pcs) Ordering designation Item no.
14 14
80 115
110 110
90 90
70 70
16 16
267763 267764
SI100
334202
Item no.
Ordering designation
Socket wrench insert, 13 mm AF, long with magnet 77 1 S-NSD13 L 335096 Socket wrench insert, 15 mm AF, long with magnet 77 1 S-NSD15 L 336413 Socket wrench insert, 21 mm AF, short with magnet 40 1 S-NSD21 L 378235 (Drive: " square, Driven: hexagon 15 AF/13 AF), especially for installing Hilti MQ installation channel system components Socket wrench insert, 13 mm AF, short Socket wrench insert, 15 mm AF, short Socket wrench insert, 21 mm AF, short (Drive: " square, Driven: hexagon 15 AF/13 AF) Extension S-V125 Pin/O-ring set 21 Pin/O-ring set 26 40 40 40 1 1 1 1 1 1 S-NSD13 S-NSD15 S-NSD21 S-V125 Set 21 Set 26 335097 334802 378234 336616 336618 336619
316
Anchor Systems
Solid brick
min. 50 mm 6 mm 6,2 mm
Concrete
min. 40 mm 6 mm 6,2 mm
T40
min. 60 mm
min. 40 mm
min. 30 mm
Max. fastenable thickness (mm) Concrete Solid brick (Hilti rec.) Sand-lime brick
Package contents
Ordering designation
Item no.
100 100 100 100 100 100 100 100 100 100 100
HUS 7.5 35 HUS 7.5 45 HUS 7.5 60 HUS 7.5 80 HUS 7.5 100 HUS 7.5 120 HUS 7.5 140 HUS 7.5 160 HUS 7.5 180 HUS 7.5 200 HUS 7.5 220
00383047 00383048 00383049 00381401 00381402 00381403 00381404 00381405 00383050 s 00383051 s 00383052
HUS-A 7.5 screw anchor with hexagon head 13 mm AF, 18 mm washer dia.
Max. fastenable thickness (mm) Concrete Solid brick* (Hilti rec.) Sand-lime brick Hollow brick* Gas/aerated concrete Screw length (mm) Package contents Ordering designation Item no.
HUS-A
15 30 15 30
5 20 5 20
0 0 0 0
45 65 45 65
HUS-A 7.5 45 M8 HUS-A 7.5 65 M8 HUS-A 7.5 45 M10 HUS-A 7.5 65 M10
For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387
317
Anchor Systems
HUS-H 7.5 screw anchor with hexagon head 13 mm AF, 18 washer diameter with T40 drive recess
Use of HUS-H n Fastening light-duty installation channels, light-duty steel angles, mechanical installation components and parts for interior panelling or cladding Features n matched system of screw anchor and screwdriver A n Screw driven straight into base material without using an anchor n Small hole diameter; high holding power n Forged-on washer and hexagon head for optimised guidance when screwdriving n Minimal expansion forces in base material HUS-H HUS-H
HUS-H 7.5 screw anchor with hexagon head 13 mm AF, 18 mm washer dia.
Max. fastenable thickness (mm) Concrete Solid brick (Hilti rec.) Sand-lime brick Hollow brick Gas/aerated concrete Screw length (mm) Package contents Ordering designation Item no.
5 15 30 50 70 90
0 5 20 40 60 80
0 0 0 20 40 60
35 45 60 80 100 120
HUS-H 7.5 35 HUS-H 7.5 45 HUS-H 7.5 60 HUS-H 7.5 80 HUS-H 7.5 100 HUS-H 7.5 120
Technical data TKI 2500 Voltage: 110/240 V Nominal power: 600 W Torque: 45 Nm, depending on application Speed: 0-2800 r.p.m. Weight: 1.5 kg Chuck: 1/4" hexagan socket with ball-notch retention Electronic cut-out via depth gauge Tangential rotary impact, thus reaction force hardly felt by operator, even with high drive torque n Control electronics for infinitely adjustable speed and impact energy n Reversing switch (clockwise/counter-clockwise rotation) n Pistol grip (pressure from operator acts along spindle axis) Protective insulation, class II as CEE/VDE Radio + TV interference suppression as per VDE 0875
Ordering designation Item no.
00227351 00227338
Features n tangential rotary impact action, thus the A high torque (reaction force) is hardly felt at the operators hand. Uses n Driving the 7.5-mm-diameter HUS screw in concrete, brick, sand-lime brick and gas concrete n Driving 8 mm diameter screws into HRD anchors n Driving 8 mm diameter screws into metal and plastic anchors n Driving 8 mm diameter screws into brick and sand-lime brick n Driving 8 mm diameter woodscrews
200
1
Package contents
TKI-S 6/35
Ordering designation S-BH 3/8" x 50
s 00220687
Item no.
Driven end: 1/4" hex as per DIN 3126 / E 6.3, Driving end: 3/8" square
Socket
Description
Adaptor
50
Length (mm)
1
Package contents
00236339
Item no.
S-BH 3/ 50
8
Socket (for HUS-H and HUS-A) 50 1 S-NSD 13L 1 S-NS 13 Socket (thin walled socket for ML channel) 50 Holder for 1/4" bits Driven end: 1/4" hex as per DIN 3126 / E 6.3, Driving end: 1/4" hex as per DIN 3126 / C 6.3
Description Length (mm) Package contents Ordering designation
00318364 3072905
Item no.
S-NSD13L
Accessories
Description
Bit holder, steel, short, magnetic Bit holder, steel, long, magnetic Bit holder with locking sleeve, magnetic Bit
50 75 50
1 1 1
Package contents
10
S-B TXI 40
00258132
S-BTXI40
s PLEASE ASK FOR DELIVERY DETAILS. 0800 886 100 | www.hilti.co.uk 1850 287 387 | www.hilti.ie Hilti. Outperform. Outlast.
318
Anchor Systems
Package contents
Ordering designation
Item no.
10 10 10 10 10
Driven end: 1/4" hex as per DIN 3126 / E 6.3, Driving end: 1/4" hex as per DIN 3126 / C 6.3
Length (mm) Package contents Ordering designation Item no.
Bit holder, steel, short, magnetic Bit holder, steel, long, magnetic Bit holder with locking sleeve, magnetic
50 75 50
1 1 1
Package contents
S-BH50M / S-BH75M
Accessories
Description
S-BHU50M
Bit
1 10
Box Qty.
Posidrive 3 Posidrive 3
00080213 00257620
Item no.
Cover caps
Description
Cover cap (flat) HTK-S15 for HT10/HPF. White 100 Cover cap (overlapping) HTK-SU17 for HT10. White 100 Cover cap (flat) HTK-S15 for HT10/HPF. Dk. Brown 100 Cover cap (overlapping) HTK-SU17 for HT10. Dk. Brown 100
319
Anchor Systems
Use
Material
Features n Smooth surface for a larger contact area with greater friction and higher holding power n Insertion detent to avoid premature expansion n Preassembled with screw to fasten parts 30 mm thick and more. Technical data: HRD-S Recommended load, L rec (kN)
Anchor size Concrete f cc 20 N/mm2 Tensile N Rec Shear V Rec Tensile N Rec Shear V Rec Tensile N Rec Shear V Rec Tensile N Rec Shear V Rec Tensile N Rec Shear V Rec Tensile N Rec Shear V Rec
Solid brick f cc 20 N/mm2 Sand-lime block f cc 12 N/mm2 NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions adjacent. Please consult Hilti Fastening Technology Manual for specific design requirements. Hollow block f cc 4 N/mm2 Sand-lime hollow block f cc 6 N/mm2 Aerated concrete f cc 6 N/mm2
HRD-SGT
HRD-S-10 1.4 1.8 0.8 0.8 1.0 1.0 0.25 0.25 1.0 1.0 0.4 0.5
HRD-SGT Version: anchor body and T40-head screw, steel zinc plated to 5 microns, chromated
Hole dia., d (mm)
o
Package contents
Ordering designation
Item no.
10 10 10 10 10 10
60 60 60 60 60 60
10 30 50 70 90 110 10 50 90
50 50 50 50 50 50 50 50 50
50 50 50 50 50 50 50 50 50
HRD-SGT 10 x 60/ 10 HRD-SGT 10 x 80/ 30 HRD-SGT 10 x 100/ 50 HRD-SGT 10 x 120/ 70 HRD-SGT 10 x 140/ 90 HRD-SGT 10 x 160/110 HRD-SRT 10 x 60/ 50 HRD-SRT 10 x 100/ 50 HRD-SRT 10 x 140/ 90
HRD-SGS Version: with hexagon-head screw 13 mm across flats, steel zinc plated to 5 microns, chromated
Hole dia., d (mm)
o
Package contents
Ordering designation
Item no.
10 10 10 10 10 10
60 60 60 60 60 60
10 30 50 70 90 110 10 30 50 90
50 50 50 50 50 50 50 50 50 50
50 50 50 50 50 50 50 50 50 50
HRD-SGS 10 x 60/ 10 HRD-SGS 10 x 80/ 30 HRD-SGS 10 x 100/ 50 HRD-SGS 10 x 120/ 70 HRD-SGS 10 x 140/ 90 HRD-SGS 10 x 160/110 HRD-SRS 10 x 60/ 10 HRD-SRS 10 x 80/ 30 HRD-SRS 10 x 100/ 50 HRD-SRS 10 x 140/ 90
For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387 0800 886 100 | www.hilti.co.uk 1850 287 387 | www.hilti.ie
320
Anchor Systems
Features n For use in hollow and solid base material n High holding power, thus fewer fastenings, less installation work and lower costs n Innovative screw design for a better hold (HRD-U8 only)
Hollow block f cc 4 N/mm2 Sand-lime hollow block f cc 6 N/mm2 Aerated concrete f cc 6 N/mm2
HRD-U-8 Tensile N Rec 1.0 3.9 Shear V Rec Tensile N Rec 0.4 Shear V Rec 0.4 Tensile N Rec 0.5 Shear V Rec 0.5 Tensile N Rec Shear V Rec - Tensile N Rec Shear V Rec Tensile N Rec 0.14 Shear V Rec 0.14
HRD-U-10 1.8 2.0 1.2 1.2 1.2 1.2 0.25 0.25 1.2 1.2 0.6 0.8
HRD-U-14 2.3 2.5 1.6 1.6 1.3 1.5 0.3 0.3 1.5 1.5 0.6 1.0
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions adjacent. Please consult Hilti Fastening Technology Manual for specific design requirements.
HRD-UGT 8 x 60/10 HRD-UGT 8 x 80/30 HRD-UGT 8 x 100/50 HRD-UGT 8 x 120/70 HRD-UGT 8 x 140/90
8 8 8 8 8
50 50 50 50 50
10 30 50 70 90
50 50 50 50 50
incl. 1 Bit TX 30 incl. 1 Bit TX 30 incl. 1 Bit TX 30 incl. 1 Bit TX 30 incl. 1 Bit TX 30
HRD-UGT Version: anchor body and T40-head screw, steel zinc plated
Hole dia., d (mm)
o
Package contents
Ordering designation
Item no.
10 10 10 10 10 10
80 80 80 80 80 80
10 30 50 70 90 110 10 50
70 70 70 70 70 70 70 70
50 50 50 50 50 50 50 50
HRD-UGT 10 x 80/ 10 HRD-UGT 10 x 100/ 30 HRD-UGT 10 x 120/ 50 HRD-UGT 10 x 140/ 70 HRD-UGT 10 x 160/ 90 HRD-UGT 10 x 180/110 HRD-URT 10 x 80/ 10 HRD-URT 10 x 120/ 50
00257289 00257290
321
Anchor Systems
A4 316
HRD-UGS Version: with hexagon-head screw 13 mm across flats, steel zinc plated
Hole dia., d (mm)
o
Package contents
Ordering designation
Item no.
10 10 10 10 10 10 10 10 10
80 80 80 80 80 80 80 80 80
10 30 50 70 110 10 30 50 70
70 70 70 70 70 70 70 70 70
50 50 50 50 50 50 50 50 25
HRD-UGS 10 x 80/10 HRD-UGS 10 x 100/30 HRD-UGS 10 x 120/50 HRD-UGS 10 x 140/70 HRD-UGS 10 x 180/110 HRD-URS 10 x 80/10 HRD-URS 10 x 100/30 HRD-URS 10 x 120/50 HRD-URS 10 x 140/70
Package contents
Ordering designation
Item no.
14 14 14 14 14 14 14 14 14 14
80 80 80 80 80 80 80 80 80 80
70 70 70 70 70 70 70 70 70 70
50 50 50 50 50 50 50 50 50 50
HRD-UGS 14 x 80/ 10 U HRD-UGS 14 x 110/ 40 U HRD-UGS 14 x 140/ 70 U HRD-UGS 14 x 160/ 90 U s HRD-UGS 14 x 180/110 U s HRD-UGS 14 x 200/130 U s HRD-UGS 14 x 230/160 U s HRD-UGS 14 x 270/200 U s HRD-UGS 14 x 310/240 U s HRD-UGS 14 x 350/280 U
00312632 00312633 00312634 00312635 00312636 00312637 00312638 00312639 00312640 00312641
Package contents
Ordering designation
Item no.
14 14 14 14 14 14 14 14 14 14
Description
80 80 80 80 80 80 80 80 80 80
70 70 70 70 70 70 70 70 70 70
Item no.
50 50 50 50 50 50 50 50 50 50
HRD-UGT 14 x 80/ 10 HRD-UGT 14 x 110/ 40 HRD-UGT 14 x 140/ 70 HRD-UGT 14 x 160/ 90 s HRD-UGT 14 x 180/110 s HRD-UGT 14 x 200/130 s HRD-UGT 14 x 230/160 s HRD-UGT 14 x 270/200 s HRD-UGT 14 x 310/240 s HRD-UGT 14 x 350/280
00312622 00312623 00312624 00312625 00312626 00312627 00312628 00312629 00312630 00312631
Cover caps
HKF-T40 White (CSK screwhead) HKF-T40 Brown (CSK screwhead)
100 100
00246780 00246782
1 " /4 Package contents
TEC-HIS
to hex socket) )
Item no.
00032220
1 1
to hex socket)
1 1
00081743 00081494
1/4" hex drive) (Driven end: 1/4" hex as per DIN 3126 / E 6.3, Driving end: 1/4" hex as per DIN 3126 / C 6.3)
Length (mm) Package contents Ordering designation Item no.
Bit holder, steel, short, magnetic Bit holder, steel, long, magnetic Bit holder with locking sleeve, magnetic Bit holder 75m SDS Bit (hex) for HRD 8 Bit (hex) for HRD 10 Bit (hex) for HRD 14
50 75 50 75
1 1 1 1 1 1 1
S-BH50M S-BH75M S-BHU50M S-BHU75M SDS Torx T30 Torx T40 Torx T50
1/4"
S-BH50M / S-BH75M
S-BHU50M
hex
S-BHU75M SDS
T30/T40 / T50
For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387 0800 886 100 | www.hilti.co.uk 1850 287 387 | www.hilti.ie Hilti. Outperform. Outlast.
322
Anchor Systems
HKD-E
Thread size
M 16 65 20
69
11.5
12.9
HSD-G 16 dowel punch EDP 16 dowel punch (across cavity) EAP 16 anchor punch (across cavity)
Item no.
14 14 14
70 100 135
90 90 90
70 70 70
50 50 50
00243744 00065822
s 00065848
ST ringbolt
Scaffold Ringbolt
Internal ring dia. (mm) Overall shank length (mm) Thread dia (mm) Ordering designation Item no.
23 + 2 23 + 2 23 + 2 23 + 2 23 + 2 23 + 2
25 25 25 25 25 25
GRS 12/ 90 GRS 12/ 120 GRS 12/ 160 GRS 12/ 190 GRS 12/ 230 GRS 12/ 350
54
127
16
ST-127-M16 ringbolt M16 ringbolt adaptor HKD 16 anchor FC 16 filler cap (grey)
LT ringbolt
27
50
VST 14
00056440
10
* 5 metres length
37
19
00310901 00057318
323
Anchor Systems
ls
ls
1
d0 d0
tfix
tfix
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
Item no.
8 8 8 8 10 10 10 12 12 12 12 12 12 12
20 32 38 45 38 52 65 38 52 65 80 54 66 83
25 39 45 52 45 58 71 45 58 71 88 60 70 90
M4 M4 M4 M4 M5 M5 M5 M6 M6 M6 M6 M8 M8 M8
4 6 12 19 8 12 25 9 12 24 40 12 24 40
HHD-S M4/ 420 HHD-S M4/ 632 HHD-S M4/1238 HHD-S M4/1945 HHD-S M5/ 838 HHD-S M5/1252 HHD-S M5/2565 HHD-S M6/ 938 HHD-S M6/1252 HHD-S M6/2465 HHD-S M6/4080 HHD-S M8/1254 HHD-S M8/2466 HHD-S M8/4083
00332060 00332061 00332062 00332063 00332065 00332066 00332067 00332069 00332070 00332071 00332072 00332073 00332074 00332075
Setting tool
For thread size Packaging contents (pcs) Ordering designation Item no.
Setting tool
M4M8
HHD-SZ2
00332076
For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387
324
Anchor Systems
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
HLD
Hole dia., (solid material) d (mm)
o
Package contents
Ordering designation
Item no.
10 17 26
Quick and easy The zinc-plated steel HSP (Hilti Speed Plug) and glass-fibre reinforced polyamide HFP (Hilti Fibre Plug) are ideal for light-duty fastenings in drywall panels. One bit that fits for the anchors and the screws allows a fast and easy setting process. Features n Sharks tooth design for correct positioning and quick installation n Cuts its own thread n One Hilti bit for anchor and screw. No setting tool required n Hilti HSP also available with F7, M6, 1/4" connecting thread n HSP and HFP delivered with or without screws Exceptional versatility n Plumbing n Interior finishing n Electrical installations n Drywall installation
Screw length
Setting operations
4 4,5 mm #8
Push the teeth of the Drive the anchor anchor into the drywall (clockwise rotation) panel. until it lies flush with the wall.
HSP
HSP-S
Anchor length ld (mm) Screw dia. (mm) Packaging contents (pcs) Ordering designation Item no.
39 4.5 100 HSP 39 4.5 100 HSP-S * 39 100 HSP-M6 * 29 4.5 100 HFP 29 4.5 100 HFP-S * 5 D-B PH2 HSP/HFP 5 D-B SQ HSP-G ** Delivered with 100 screws, 4.5 mm 30 mm
HFP
HFP-S Bit for HSP with connecting thread 1/4 /M6/F7 (D-B SQ HSP-G) www.hilti.co.uk | 0800 886 100 www.hilti.ie | 1850 287 387
325
Anchor Systems
installations, for roof, interior finishing and wall extensions, in building construction, for mechanical installations, fastening wood, etc. n Removable: Simple removal using a screwdriver equipped with a cross-recess bit n Reduced hole and setting depths (up to 20 mm less): Time saving over comparable impact anchors n Trouble-free setting: No problems thanks to high-quality material, even in extremely cold or dry conditions n Stiff anchor body: Ensures good anchor guidance when throughfastening n Quality and reliability Base materials Concrete, solid brick, sand-lime block, aerated / gas concrete, hollow block, vertically perforated brick Fastening of wooden laths / timber battens, drywall studs, framing, metal sections and mouldings, electrical installation components, mechanical installations (plumbing / pipefitting), cable trunking, pipe rings, sheeting / foils, etc. Setting operations
l l
Fastening wooden laths Notes on setting If used in perforated or hollow blocks, the anchor length must ensure that the expansion section is in at least one block web. The anchor should be used solely for through fastening.
d0
4 5 5 5 5 6 6 6 6 6 6 6 8 8 8 8 8 8 8
2 2 5 10 15 2 5 10 15 25 30 40 10 20 30 40 60 80 80
25 25 30 30 30 40 40 40 40 40 40 40 50 50 50 50 50 50 50
20 20 20 20 20 25 25 25 25 25 25 25 30 30 30 30 30 30 30
20 20 25 30 35 25 30 35 40 50 55 65 40 50 60 70 90 110 130
250 250 200 200 200 150 150 150 150 100 100 100 100 50 50 50 50 50 100
HPS-1 HPS-1 HPS-1 HPS-1 HPS-1 HPS-1 HPS-1 HPS-1 HPS-1 HPS-1 HPS-1 HPS-1 HPS-1 HPS-1 HPS-1 HPS-1 HPS-1 HPS-1 HPS-1
4/ 0 x 20 5/ 0 x 20 5/ 5 x 25 5/10 x 30 5/15 x 35 6/ 0 x 25 6/ 5 x 30 6/10 x 35 6/15 x 40 6/25 x 50 6/30 x 55 6/40 x 65 8/10 x 40 8/20 x 50 8/30 x 60 8/40 x 70 8/60 x 90 8/80 x 110 8/100 x 130
00260369 00260395 00260347 00230515 00260348 00238159 00260349 00230516 00260350 00260351 00230517 00260352 00260353 00230518 00260354 00230519 00260355 00260356 00260367
00260357 00230524 00260358 00238161 00260359 00230525 00260360 00260361 00230526 00260362 00260363 00230527 00260364 00230528 00260365 00260366 -
In addition, we offer various other versions, e.g. with a counter-sunk head, connection thread, coloured screw head and anchor body, etc.
For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387 0800 886 100 | www.hilti.co.uk 1850 287 387 | www.hilti.ie Hilti. Outperform. Outlast.
326
Anchor Systems
h1
tfix
Features n Setting by impact expansion n Automatic follow-up expansion, thus safe fastening n Fastening of lathes (DBZ 6/35) n Fire resistance
N
rec
Min. anchorage h
depth (mm)
nom
rec
(kN)
(kN)
Package contents
Ordering designation
Item no.
6 6
49 79
41 41
4.5 35
32 72
0.8 0.8
1.1 1.1
100 100
00256312 00256311
do
h1 hnom
HA8 R1
HA 8
Hole dia., d (mm)
o
8 8
rec
(kN)
Package contents
Ordering designation
Item no.
50 50
12-15 12-15
5 5
40 40
0.8 0.8
100 100
HA 8 R1 (ring) HA 8 R1 (hook)
00057059 00057036
327
Anchor Systems
Setting instructions
7
I 50mm do h1 tfix
Technical data do Nominal drill bit diameter h1 Min. hole depth tfix Max. insulation thickness I Fastener length Min. embedment depth
8x70 8 40 40 70 30
8x90 8 40 60 90 30
8x110 8 40 80 110 30
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
Package contents
Ordering designation
Item no.
8 8 8 8 8 8 8 8
40 40 40 40 40 40 40 40
IZ top plate as an additional part, 90 mm dia., for fastening soft insulation materials
Package contents Ordering designation Item no.
100
HDT 90
s 285627
s PLEASE ASK FOR DELIVERY DETAILS. For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387
328
Anchor Systems
do
Technical data do Nominal drill bit diameter h1 Min. hole depth tfix Max. fastenable thickness I Fastener length
tfix
0/2 8 50 20 50
2/4 8 50 40 70
4/6 8 50 60 90
6/8 8 50 80 110
h1
IDP
Max. insulation thickness, t (mm)
fix
Package contents
Ordering designation
Item no.
8 8 8 8 8 8 8
50 50 50 50 50 50 50
IDP 0/ 2 IDP 2/ 4 IDP 4/ 6 IDP 6/ 8 IDP 8/10 IDP 10/12 IDP 13/15
Ordering designation
l l 35mm
Base material n Concrete n Lightweight concrete n Solid brick n Cavity/perforated brick Use n Fastening insulating materials beneath cladding/facade panels where IDMR non-flammable material is specified Material n Sheet steel, Sendzimir zinc plated, building material class A as per DIN 4102. l Technical data do Nominal drill bit diameter h1 Min. hole depth tfix Max. fastenable thickness do I Fastener length
h1 tfix
0/3 8 55 30 80
3/6 8 55 60 110
6/9 8 55 90 140
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions above. Please consult Hilti Fastening Technology Manual for specific design requirements.
Package contents
Ordering designation
Item no.
up to 30 30- 60 60- 90
For use with:
80 110 140
8 8 8
55 55 55
IDMR-T insulation plates as accessories, 80 mm dia., for IDMR to secure soft insulating material
Insulation disc Stainless steel expansion pin Setting punch for expansion pin 250 250 1 IDMR-T 00065789 00065728 00065729
329
Anchor Systems
Use
Material
NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete edges and the conditions adjacent. Please consult Hilti Fastening Technology Manual for specific design requirements.
5 6 8 10 12 14
25 30 40 50 60 70
Min. anchorage depth, hnom (mm) Anchor length (mm)
6 8 10
70 80 90
50 60 70
810 1012 7 8
7 7 7 7 10
50 50 50 50 50
For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387 0800 886 100 | www.hilti.co.uk 1850 287 387 | www.hilti.ie
330
Anchor Systems
Scaffold Ring Bolt Tester Kit The new NASC/CFA Guidance Note TG4:04 Anchorage Systems for Scaffolding sets out requirements for Preliminary Tests of scaffold anchors (to check the suitability and allowable loads of an anchor type in a particular base material) and Proof Tests (sample tests to check that anchors have been installed correctly) to be carried out on all jobs. Kit contains: Tester with fixed gauge calibration to 20 kN; 150 mm load spreading bridge with 75 mm hex legs; M12 clevis adaptor with locking adaptor, Bolt tester adaptor; M16 threaded stud adaptor; M12 button adaptor; Calibration Certificate and Method Statement. Supplied in robust Hilti case. Item number: s 0321481
Wall Tie Tester Kit Kit contains: Tester with 5 kN fixed gauge with maximum load indicator, 100 mm wall tie spacer bridge; M5 and M6 wall tie adaptors (threaded rod adaptors); 2 x M12 threaded button adaptors; calibration certificate and method statement. Supplied in robust Hilti case. Heavy duty Tester Kit and Master Kit. Item number:
s 0321489
Master Kit The Hilti Field Engineers Kit Covers most testing applications up to 20 kN* Kit contains: Test with 2 interchangeable gauges (0-5,k 0-20 kN) standard 150 load spreading bridge; 6 threaded button adaptors (M4, M5, M6, M8, M10 and M12); 6 plain slotted adaptors (internal diameters 4.5, 5.5, 6.5, 8.5, 10.5, 12.5 mm); 2 threaded rod adaptors (M4, M5); M16, M20 and 5/8 Whitworth stud adaptors; M12 clevis adaptor with ring bolt adaptor, set screw and washer set (M6, M8, M10, M12, M16); bolt tester adaptor; insulation fastener adaptor, 50 mm and 100 mm hex. extension legs sets; calibration certificate and method statements. Supplied in a large red padded steel carrying case. Item number: s 0355338
s PLEASE ASK FOR DELIVERY DETAILS. www.hilti.co.uk | 0800 886 100 www.hilti.ie | 1850 287 387
331
Anchor Systems
HRS 22
00216962 Computer-designed thread flanks The thread flanks provide a secure keying hold in the timber tie, with good long-term characteristics under dynamic loading. The HRS is expanded by the screw shank, making it insensitive to variances in screw geometry.
HRA
HRC
HRT
For further Technical Information see Fastening Technology Manual or visit the website or call Hilti TAS on (GB) 0161 886 1144 or (IRL) 1850 287 387 0800 886 100 | www.hilti.co.uk 1850 287 387 | www.hilti.ie
332