Beruflich Dokumente
Kultur Dokumente
BOHAI NKK Drill Pipe Co., Ltd. (BHNK) is a joint venture with CNPC BOHAI Equipment Manufacture Co., Ltd., JEF Steel Corporation,
Marubeni-Itochu Steel Inc., and Metal-One Corporation as the shareholders. BHNK was established in December, 1995 and the current number of personnel is 252, among which there are 32 staff with senior technical title, and 2 resident experts from Japan. BHNK went into production in 1997 and, till now, has accumulatively yielded out 180,000 Metric Tons drill pipes. BHNK Drill Pipe Specifications: 1 API StandardOD: 23/8 65/8Grade: E75X95G105S135. 2 Sulfur resistant drill pipe with C95SC105SS grades. 3 Double shoulder Tool Joint (DSTJ) drill pipe with high anti torque ability. 4 5 EUE drill pipe jointly developed in conjunction with Tarim Oil field, China.
BHNK, boasting advanced techniques and high automaticity, uses the whole production line and technologies transferred from NKK (a leading international supplier of drill pipe with over 30 years experience) with an annual yield capacity of 35,000 Metric Tons.
Friction Welding
Hardness MPI
Cutting Bead
of
Hard-banding
of
Tempering of Weld Line Threading Weld Line Inspection Thread Inspection Weighing & Length Measuring
Threading
Friction Welding
Corporate Qualification
API 5DP
ISO 9001:2008
Drill Pipe Drill Pipe with API Standards Mechanical Properties of Pipe Body
Yield Strength Standard Grade MIN ksiN/mm Group 1 APISpec 5D Group 2 E-75 X-95 G-105 S-135 75 95 517 655
2
Elongation MIN % 13
MAX ksiN/mm -
SSC Test
MAX ksi
% 85 85
SSC Test
MAX ksi
% 85 65
(1 The Shape of throat is changed to minimize stress concentration and lower the frequency of fatigue failures on throat. 2 The ID and upset area of Pin Tool Joint are upsized to reduce water horse power loss of mug and enhance cycle efficiency. 3 Special materials are used for tool joint and pipe body to improve the mechanical properties of the drill pipe as a whole. Comparison with normal drill pipe:
Correlation Table of Drill Pipe Dimensions Tool Joint Specification 5EUE 5Normal S135 OD 171.5 168.3 IDPIN IDBOX OD (Weld Line) 88.9 69.9 Tool Joint Specification Tensile Strength Mpa 5EUE 5Normal S135 1000 965 Yield Strength Mpa 931-1138 827 101.6 88.9 136 130.2 Weld Line Impact Energy J 45 20 Weld Line OD 136 130.2 ID 100 94.7 Unitmm Pipe Body OD 127 127 ID 108 108.6
Correlation Table of Drill Pipe Mechanical Properties: Pipe Body Single Impact Average Impact Energy Energy J 80 38 J 90 47
Von Mises Equivalent Stress Distribution on Upset Throat with API Standard