Beruflich Dokumente
Kultur Dokumente
Edition 2010
Fiber Optic
Your partner for system solutions The HUBER+SUHNER Group is a leading global supplier of components and systems for electrical and optical connectivity. Our customers in Communications, Industrial and Transportation markets appreciate that we are specialists with detailed knowledge of practical applications. We offer technical expertise in radio frequency technology, fiber optics and lowfrequency under one roof, thus providing a unique basis for continual innovation focused on the needs of our customers all over the world.
Content
Cable assemblies
53
63
Field termination
85
99
Connector overview Connector and adapter code LSH (E-2000) LX.5 (SFOC 1.25) LC-HQ Push-Pull connector SC MU FCPC threaded nut connector ST bayonet nut connector LSA (DIN) threaded nut connector FSMA threaded nut connector MT-RJ latched Connector accessories Hybrid adapters
8 10 12 18 24 30 33 34 36 38 39 40 41 47
Connector Overview
see page 12 Connector type Compliance Tuning In steps of Mech./therm. perform. Tensile load [N] Mating durability [cycles] Operating temperature Flammability UL 94 V0 Colour of housing SM PC SM APC MM OM3 Brass nickel-plated Fiber type E9/125 G50/125/OM3 G62.5/125 HCS200/230 Features One-piece design Automatic metal shutter SFF connector Colour coding For HighPower applications Cable diameter [mm] Insertion loss [dB]* MM/OM3 typ. 97 % SM 0.1dB typ. 97 % SM HighEnd typ. 97 % SM LANEco typ. 97 % Return loss [dB] Singlemode PC > UPC > * each-to-each APC > 0.6 up to 3.5 0.20 0.50 0.06 0.15 0.12 0.25 0.20 0.45 45 50 85 LSH (E2000) IEC 6175415 TIA 60416 60 100 1000 40 to +85 C blue green beige beige
see page 18 LX.5 IEC 6175423 TIA 60413 45 100 1000 40 to +85 C blue green beige beige
see page 24 LC-HQ IEC 6175420 TIA 60410A 45 100 1000 40 to +85 C blue green black/beige black/aqua
see page 30 SC IEC 617544 TIA 6043 45 100 1000 40 to +85 C blue green beige aqua
0.6 up to 2.8 0.20 0.50 0.06 0.15 0.12 0.25 0.20 0.45 45 50 85
0.6 up to 2.8 0.20 0.50 0.06 0.15 0.12 0.25 0.20 0.45 45 50 85
0.6 up to 3.5 0.20 0.50 0.06 0.15 0.12 0.25 0.20 0.45 45 50 85
0.6 up to 2.0 0.20 0.50 n/a n/a 0.12 0.25 0.20 0.45 45 50
Connector Overview
see page 34 FCPC IEC 6175413 TIA 6044A PC infinitely APC 60 100 1000 40 to +85 C
70 500 25 to +70 C
black black 0.6 up to 3.5 0.20 0.50 0.06 0.15 0.12 0.25 0.20 0.45 45 50 85 (black nut) 0.6 up to 3.5 0.25 0.70 n/a n/a n/a n/a n/a n/a 0.6 up to 3.5 0.20 0.50 n/a n/a n/a n/a 0.20 0.45 45 50 0.6 up to 3.5 0.20 0.50 n/a n/a n/a n/a 0.20 0.45 45 50 0.6 up to 3.5 0.20 0.50 n/a n/a 0.12 0.25 0.20 0.45 45 50 85 0.6 up to 4.5 1.00 1.50 n/a n/a n/a n/a n/a n/a 0.6 and 1.7 0.25 0.70 n/a n/a n/a n/a 0.25 0.70 35 35
Connector Code
Ferrule type Number of connections
Connector type FCPC FLC FLSH FLSA FLX5 FMTJ FMU FSC FSMA FST ODCE ODCP ODCS SPEC CMAX LEAN SEC M/M Z/M Z/K 2000
Version
Description FCPC connector LC connector LSH (E2000) connector LSA connector LX.5 connector MTRJ connector MU connector SC connector FSMA connector ST connector ODC extension ODC plug ODC socket special connector for SC lean security metal ferrule / metal body zirconia ferrule / metal body zirconia ferrule / plastic body for E2000
singlemode 9/125 multimode 50;62.5/125 HCS 200/230 PCS 200/300 premium OM3 PC version with flat ferrule PC version with radius ferrule APC version no. of connections (with one connection, nothing stated)
10
Adapter Code
Connection side 1 FCPC FLC FLSH FLSA FLX5 FMTJ FMU FSC FSMA FCPC FLC FLSH FLSA FLX5 FMTJ FMU FSC FSMA REC A B C D E F 0xx 1xx 2xx 3xx 6xx XX Connection side 2 Flange type Sleeve type Number of connections
Description FCPC LC LSH (E2000) LSA LX.5 MTRJ MU SC SMA FCPC LC LSH (E2000) LSA LX.5 MTRJ MU SC SMA receptacle without flange 2 loose nuts as flange 1 loose, 1 fixed nut 2hole flange, fixed 4hole flange, fixed 1 loose nut as flange without sleeve zirconia sleeve phosphorbronze sleeve OM3 APC, zirconia sleeve no. of connections (with one connection, nothing stated)
11
12
LSH (E2000)
E-2000 is a high performance connector which meets the highest standards by excellence in design and manufacturing processes. Only high quality and high precision materials are used to guarantee connections at the highest level. HUBER+SUHNER E-2000 products meet the international standards IEC 61754-15 and TIA 604-16 and are naturally RoHS compliant.
High performance
The E-2000 has proven its performance world-wide in CATV and telecommunication networks. Quality and performance are in a class of its own. With a high precision Zirconia full ceramic ferrule an insertion loss of 0.1 dB and an APC return loss of more than 85 dB, E-2000 is especially suited for installation in global high performance networks.
High reliability
The fully controlled manufacturing processes stand for the incomparably reliability of HUBER+SUHNER E-2000-products. Not only the connector-production is quality proof; HUBER+SUHNER advances quality and reliability a step further. HUBER+SUHNER E-2000 connectors are terminated only by certified LAS partners. These local assembly shops have been chosen because of their profound knowledge and ability to meet the highest quality standards.
High safety
In addition to high performance, E-2000 offers safety and time savings. With its automatic full metal shutters, E-2000 conforms to the highest safety requirements in all current laser classes. Full metal shutters are essential in high power applications. All optical functional parts are protected against mechanical damage and dust. Easily establish permanent connections by simply removing the lock-up-lever. This prevents any accidental disconnecting and allows easy and safe handling.
High flexibility
HUBER+SUHNER offers a complete range of E-2000-products that fit every application. The mechanical and colour coding system can be changed both at the connector and at the adapter. This system prevents interconnection errors and saves time during installation and maintenance. Now, not only single circuit designs can profit from E-2000s outstanding features; the newly designed duplex connectors and adapters allow time and space savings.
13
LSH (E2000)
Features
Latched Push-Pull connector Automatic metal shutter in connector and adapter for dust protection and laser safety One-piece design for easy termination Colour coding of connector and adapter Mechanical coding of connector and adapter Ideal for HighPower applications Switchable duplex clips
Insertion loss1) [dB] (mean/97%) 0.12/0.25 0.06/0.15 Insertion loss1) [dB] (mean/97%) 0.2 / 0.5 0.3 / 0.75
Polishing PC
G50/125, G62.5/125 PC
14
LSH (E2000)
Ordering information: LSH adapter, uncoded, zirconia ceramic sleeve
Adapter type simplex with integrated fixing springs compact SM compact APC compact SM HighPower 0.1 dB compact SM APC HighPower 0.1 dB compact MM Colour blue green blue green beige Type FLSHFLSHA100 FLSHFLSHA600 FLSHFLSHA110 FLSHFLSHA610 FLSHFLSHA101
Adapter type simplex with 2-hole flange SM SM APC SM HighPower 0.1 dB SM APC HighPower 0.1 dB MM Adapter type duplex with integrated fixing springs SM SM APC SM HighPower 0.1 dB SM APC HighPower 0.1 dB MM Adapter type duplex with 2-hole flange SM SM APC SM HighPower 0.1 dB SM APC HighPower 0.1 dB MM
Colour blue green blue green beige Colour blue green blue green beige Colour blue green blue green beige
Type FLSHFLSHD100 FLSHFLSHD600 FLSHFLSHD110 FLSHFLSHD610 FLSHFLSHD102 Type FLSHFLSHA10002 FLSHFLSHA60002 FLSHFLSHA11002 FLSHFLSHA61002 FLSHFLSHA10102 Type FLSHFLSHD10002 FLSHFLSHD60002 FLSHFLSHD11002 FLSHFLSHD61002 FLSHFLSHD10102
15
LSH (E2000)
Specifications
Compliance Technology Tuning Mechanical resistance Operating temperature Flammability Durability Colour of housing IEC 6175415, TIA 60416 full ceramic ferrule (2.5 mm) and sleeve in 60 steps 100 N tensile load 40 C to +85 C UL 94 V0 min. 1000 mating cycles singlemode singlemode multimode PC APC blue green beige
1.3
19.7
9.3
13.2
12.9
9.5
bmax = 1.3 mm
15.3
9
2 .2
M2
22
18
b 9.2
bmax = 1.6 mm
13.3
15
bmax = 1.6 mm
16
18
13
LSH (E2000)
Mechanical coding system
The mechanical and colour coding system allows fast and secure installation of connectors and adapters, ensuring mating without risk of confusion. Connectors and adapters without coding are still available and fit on any coded piece.
Ordering information
Type FLSHFLSHD600A adapter code 0 1 2 3 4 5 6 A B C D E F G H I J K L uncoded same colour as adapter red brown yellow orange purple white red brown yellow orange purple white green blue black grey pink coded coded coded coded coded coded uncoded uncoded uncoded uncoded uncoded uncoded uncoded uncoded uncoded uncoded uncoded Type FLSH2000A101C 1 2 3 4 5 6 A B C D E F G H I J K L connector code red brown yellow orange purple white red brown yellow orange purple white green blue black grey pink turquoise coded coded coded coded coded coded uncoded uncoded uncoded uncoded uncoded uncoded uncoded uncoded uncoded uncoded uncoded uncoded
turquoise uncoded
Examples:
FLSHFLSHD600A14 green adapter + red coding frame on frontside, orange coding frame on backside FLSH2000A101C1 blue connector + red coding
17
High performance
Even though being small sized, LX.5 is a big leap in quality and performance. CATV and Telco network operators around the globe rely on the LX.5s proven performance. With a high precision Zirconia full ceramic ferrule, an insertion loss of 0.1 dB and an APC return loss of more than 85 dB LX.5 is especially suited for installation in global high performance networks.
High reliability
HUBER+SUHNERs extensive knowledge in manufacturing processes leads to the highest reliability. The connectors are produced by a process of proven quality, but HUBER+SUHNER advances quality and reliability a step further. LX.5 connectors are terminated only by certified LAS partners. These local assembly shops have been chosen because of their profound know ledge and ability to meet the highest quality standards.
High safety
In addition to its high performance, LX.5 offers safety and time savings. With its automatic full metal shutters it conforms to the highest safety requirements in all current laser classes. Full metal shutters are essential in high power applications. All optical functional parts are protected against mechanical damage and dust. With our special tool to engage the safety lock you easily establish permanent connection and prevent accidental disconnecting.
High flexibility
HUBER+SUHNER offers a wide range of LX.5 products to match every application. The colour coding system can be changed both at the connector and the adapter. It prevents interconnection errors and saves time during installation and maintenance.
19
Specifications
Compliance Technology Tuning Mechanical resistance Operating temperature Flammability Durability Colour of housing IEC 6175423, TIA 60413 full ceramic ferrule (1.25 mm) and sleeve in 45 steps 100 N tensile load 40 C to +85 C UL 94 V0 min. 1000 mating cycles singlemode singlemode multimode PC APC blue green beige
13.2
22
18
13.2
13
17
43.9
27.6
9.4
9.8
20
Polishing PC PC
21
Adapter type SM duplex SM duplex HighPower SM APC duplex SM APC duplex HighPower MM duplex
Mounting flange with spring clip flange with spring clip flange with spring clip flange with spring clip flange with spring clip
Sleeve material zirconia ceramic zirconia ceramic zirconia ceramic zirconia ceramic zirconia ceramic
Adapter type SM duplex SM duplex HighPower SM APC duplex SM APC duplex HighPower MM duplex
Mounting with 2hole flange with 2hole flange with 2hole flange with 2hole flange with 2hole flange
Sleeve material zirconia ceramic zirconia ceramic zirconia ceramic zirconia ceramic zirconia ceramic
22
Type ACCLAB001
Type 9801.40.D
23
24
25
LCHQ
Features
Push-Pull mechanism for best handling and highest packing density (Patent pending) Two connections in one SC shaped adapter One-piece design for easy termination Short rigid length of pigtail-connector Switchable duplex-connectors
Specifications
Compliance Technology Tuning Mechanical resistance Operating temperature Flammability Durability Connector types IEC 6175420, TIA 60410A full ceramic ferrule (1.25 mm) and sleeve in 45 steps 100 N tensile load 40 C to +85 C UL 94 V0 min. 1000 mating cycles singlemode PC singlemode APC multimode/OM3
26
LCHQ
Ordering information:
LC connector for cable diameter 1.0 mm Connector type SM SM SM premium SM premium G50/125, G62.5/125 OM3 LC-HQ connector for cable diameter 2.8 mm Connector type SM SM SM premium SM premium G50/125, G62.5/125, OM3
*MM and OM3 are identified by beige or aqua clips.
Push-Pull clips for LC-HQ connectors Connections Colour simplex simplex simplex simplex simplex duplex duplex duplex duplex duplex blue green beige black aqua blue green beige black aqua Type FLC-CLP-HQ-BU FLC-CLP-HQ-GR FLC-CLP-HQ-BG FLC-CLP-HQ-BK FLC-CLP-HQ-TQ FLC-CLP-HQ-BU-02 FLC-CLP-HQ-GR-02 FLC-CLP-HQ-BG-02 FLC-CLP-HQ-BK-02 FLC-CLP-HQ-TQ-02
27
LCHQ
Ordering information: LC adapter
Duplex, integrated fixing springs, zirconia ceramic sleeves Adapter type SM SM APC MM Colour blue green beige Type FLC-FLC-A100-02 FLC-FLC-A600-02 FLC-FLC-A200-02
Duplex, SC footprint, integrated fixing springs, zirconia ceramic sleeves Adapter type SM SM APC MM OM3 Duplex, SC footprint, 2-hole-flange, zirconia ceramic sleeves Adapter type SM SM APC MM OM3 Simplex, integrated fixing springs Adapter type SM SM APC MM Quad, integrated fixing springs Adapter type SM SM APC MM OM3 Sleeve material zirconia ceramic zirconia ceramic phosphor bronze zirconia ceramic Colour blue green beige aqua Type FLC-FLC-A100-04 FLC-FLC-A600-04 FLC-FLC-A200-04 FLC-FLC-A300-04 Sleeve material zirconia ceramic zirconia ceramic phosphor bronze Colour blue green beige Type FLC-FLC-A100 FLC-FLC-A600 FLC-FLC-A200 Colour blue green beige aqua Type FLC-FLC-D101-02 FLC-FLC-D601-02 FLC-FLC-D201-02 FLC-FLC-D301-02 Colour blue green beige aqua Type FLC-FLC-A102-02 FLC-FLC-A602-02 FLC-FLC-A202-02 FLC-FLC-A302-02
28
LCHQ
29
SC
Features
Push-pull connector One-piece design for easy termination High mechanical and thermal resistance according to Telcordia GR-326-CORE IEC 60874-14 series
Specifications
Compliance Technology Tuning Mechanical resistance Operating temperature Flammability Durability Colour of housing IEC 617544, TIA 6043 full ceramic ferrule (2.5 mm) and sleeve (SM) in 45 steps 100 N tensile load 40 C to +85 C UL 94 V0 min. 1000 mating cycles singlemode singlemode multimode OM3 PC (APC 8/9) blue green beige aqua
56 25
8.4 7.4
9.3
15.4
12.8
8.9
22
12.3
2.3
9.8
9.3
13.2
15.4
bmax = 1.6 mm
12.8
30
14.6
18
SC
Ordering information: SC connector
Connector type SM HighEnd SM HighEnd SM premium SM premium G50/125, G62.5/125 OM3 HCS200/230
1)
Insertion loss1) [dB] (mean/97%) 0.12/0.25 0.12/0.25 0.06/0.15 0.06/0.15 0.20/0.50 0.20/0.50 0.30/0.75
31
SC DUPLEX
Features
High mechanical and thermal resistance according to Telcordia GR-326-CORE Channel identification (A-B) IEC 60874-19 series
24.7
12.7
56.0
11.5
Sleeve material zirconia ceramic zirconia ceramic phosphorbronze zirconia ceramic zirconia ceramic phosphorbronze
12.7
bmax = 1.6 mm
27.6
9.4
M2
26.4
30.5
25.9
12.7
28
30
32
MU
Features
Push-pull connector Small form factor connector for high packing density
Specifications
Compliance Technology Tuning Mechanical resistance Operating temperature Flammability Durability Colour of housing
4.4 6.4
IEC 617546 full ceramic ferrule (1.25 mm) and sleeve in 90 steps 70 N tensile load 40 C to +85 C UL 94 V0 min. 1000 mating cycles singlemode multimode
42.2
PC
brown brown
26.9
9.6
10.8
11.8
6.5
6 10.6
9.6
7.4
7.2
33
FCPC
Features
Threaded nut connector One-piece design for easy termination Very short rigid length High mechanical and thermal resistance according to Telcordia GR-326-CORE
Specifications
Compliance Technology Tuning Mechanical resistance Operating temperature Durability Material IEC 6175413, TIA 6044A full ceramic ferrule (2.5 mm) and sleeve PC APC continuously in 60 steps
100 N tensile load 40 C to +85 C min. 1000 mating cycles brass nickel-plated
8.4
2 9.2
4.4 2.2
9.5
5.5
14.9
15
34
SW7
19
9.5
9.5
15
FCPC
Ordering information: FCPC connector
Connector type SM wide key SM small key SM wide key SM wide key premium SM small key premium SM wide key premium G50/125, G62.5/125 wide key HCS200/230
1)
Insertion loss1) [dB] (mean/97%) 0.12/0.25 0.12/0.25 0.12/0.25 0.06/0.15 0.06/0.15 0.06/0.15 0.20/0.50 0.30/0.75
Cable [mm] 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
35
Specifications
Compliance Technology Mechanical resistance Operating temperature Durability Material IEC 617542, TIA 6042 full ceramic ferrule 2.5 mm 100 N tensile load 40 C to +85 C min. 1000 mating cycles brass nickel-plated
FSTLEAN
57
FSTHQ
57
9.7
9.5
8 10.1 10.31
8 10.1 10.3
12.5
SW 12
SW 7.6
9.6
b bmax = 3.4 mm
9.9 29.4
3/824 UNF2A
36
Insertion loss1) Polishing [dB] (mean/97%) Cable [mm] Type PC PC PC PC PC 0.25/0.70 0.25/0.70 0.20/0.50 0.40/0.75 0.20/0.50 3.5 3.5 3.5 3.5 3.5 3.5 3.5 FSTLEANB103 FSTLEANB106 FSTZ/MA101 FSTZ/MB101 FSTZ/MD101 FSTSECA101 FSTSECB101
PC/UPC 0.20/0.45
IEC 61300334
37
LSA (DIN)
Features
Threaded nut connector One-piece design for easy and quick termination Long ferrule according to DIN
Specifications
Compliance Technology Tuning Mechanical resistance Operating temperature Durability Material IEC 617543, DIN 47256 full ceramic ferrule (2.5 mm) in 60 steps 100 N tensile load 40 C to +85 C min. 1000 mating cycles brass nickelplated
60 10
M5.5x0.5
4.9
4.7
b bmax = 5 mm 24.4
13.5
6.5
2.3
3.5
7.1
5.8
Type FLSAFLSAB100
HUBER+SUHNER FIBER OPTICS
FSMA
Features
Threaded nut connector One-piece design for easy and quick termination O-ring seal Connector without PC (physical contact)
Specifications
Compliance Technology Mechanical resistance Operating temperature Durability Material
3.2 1/436 UNS2B 8.5
IEC 61754-22 metal ferrule and sleeve 100 N tensile load 40 C to +85 C min. 1000 mating cycles brass nickelplated
1/436 UNS2B 12
SW 8 58
1.6 23.5
SW 8
FSMA-FSMA-C001
1/436 UNS2B
10
10
6.75
b b = 2 mm
FSMA-FSMA-B001
39
MTRJ
Features
Latched push-pull connector Small form factor connector for high packing density. Two connections in SC shape adapter Two fibers in one ferrule
Specifications
Compliance Technology Mechanical resistance Operating temperature Durability Material Colour of housing
50.8
IEC 6175418, TIA 60412 plastic ferrule 70 N tensile load 25 C to +70 C min. 500 mating cycles plastic connector adapter black beige (SM and MM) (SM and MM)
28.1
13.1
14.6 12.9
9.5
3 28.1
12.5
9.3
Please note: MTRJ connectors are available as patchcord or pigtail cables only
40
22.1
2 2 2 1
Boot 1 2
6.5
5.0 58.0
2 1
4.5
16.6
3.05
24
Boot 1 2
41
36.6 6.8
Cable (min. max.) 1.6 1.9 mm 2.0 mm 2.1 2.3 mm 2.4 2.6 mm 2.7 2.9 mm 3.0 3.2 mm Crimp sleeve 84057556 84041153 84057554 84057553 84057547 84057555
84041053
84041055
84041058
84041060
84041061 1000
84041062
84041064
84041065
84041066
84041067
Boot Crimp sleeve 840575451) Black 84057623 Green 84057625 Packing unit
6.8
29.0
100
Boot Crimp sleeve 23232995 23231084 23231085 23231086 Black 84057551 100
5.0
Packing unit
38.0
42
29.0
Cable (min. max.) 1.6 1.7 mm 1.8 1.9 mm 2.0 mm 2.1 2.2 mm 2.3 2.5 mm 2.6 2.8 mm
Boot Crimp sleeve 84057562 84057569 84057568 84057564 84057566 84057567 84041107 84042731 84042729 84042727 84042725 100 84034687 84041094 84041097 84041098 84041099 1000 Black Green Red Yellow Blue Packing unit
4.9
43
Angled Boots for LSH (E2000), SC, FCPC, LSA, ST, FSMA
Designed to install E2000, SC, FCPC, LSA, ST and FSMA connectors into racks with tight space conditions. The 90 boot is used in addition to a standard crimpset and guarantees the minimal bending radius.
Specifications
Cable diameter Minimal bending radius Material Colour up to 2.9 mm 30 mm halogen free and flame retardant according to UL 94 V0 green/blue/beige
Ordering information
Cable (min. max.) 1.6 1.9 mm 2.0 mm 2.1 2.3 mm 2.4 2.6 mm 2.7 2.9 mm Crimp sleeve 84057556 84041153 84057554 84057553 84057547 1000 63128300 63128301 63128302 100 Packing unit crimp sleeves Boot Green Blue Beige Packing unit boots
33.0
6.5
20.0
20.0
44
R2
Specifications
2
Cable diameter Side load resistance Minimal bending radius Material Colour
1.6 mm to 2.5 mm 20 N (also for 1.7 mm cable) 30 mm halogen free and flame retardant according to UL 94 V0 black
Ordering information
Cable (min. max.) 1.6 1.7 mm 1.8 1.9 mm 2.0 mm 2.1 2.2 mm 2.3 2.5 mm 2.6 2.7 mm Crimp sleeve 84057562 84057569 84057568 84057564 84057566 84057567 1000 84034664 84034663 84034662 100 Packing unit crimp sleeves 1 = 90 angled boot, long 2 = 90 angled boot, standard 3 = 45 angled boot Packing unit boots
90 boot in horizontally mounted duplex adapters 90 boot in vertically mounted duplex adapters
45
Specifications
Material Temperature range Colour TPE halogen free and flame retardant acc. to UL 94 V0 60 C to +85 C black
Ordering information
Item no. 84020776 84019782 Type ACCSTR001 100_P ACCSTR001 1000_P
1.7
46
Hybrid Adapters
MU-A 7.0 9.0
6.9
11.7
11.5
6.6
13.1
7.1
bmax=1.6mm
27.6
9.0
Type FLCFMUA100
13.2
13
9.5 9.4
Features zirconia ceramic sleeve, duplex, blue zirconia ceramic sleeve, duplex, green zirconia ceramic sleeve, duplex, beige
M80.75
18.0
22.0
13.2
13.0
17
9.8
M2
Features zirconia ceramic sleeve, wide key, blue zirconia ceramic sleeve, wide key, green zirconia ceramic sleeve, small key, green
18.0
47
Hybrid Adapters
M2
7.2
2.0 X
10.0
8.2
b bmax=2mm
7.0
Type FSTFCPCC100
18.0
13.2
22.0
18.0
9.8
3.5
Type FSCFCPCD101
48
12.8
2.3
18.0
Hybrid Adapters
28.5 M2 8.3 2.3 12.3 3 9.3
22.0
Type FSCFSTD100
26.4
30.5
28.0
25.9
12.7 9.4
M2
bmax=1.6mm
28.5
13.2
12.8
30.5
9.8
bmax=1.6mm
14.6
49
34.7
18.0
Hybrid Adapters
28.5 12.3 8.3 3 9.3
13.2
12.8
Type FSCFSTA100
50
14.6
Cable Assemblies
Assembly code Assembly classes HighPower assemblies Polarization Maintaining (PM) assemblies
54 56 58 60
53
Assembly Code
27H01CD0 09 LB LE 50 53 54 62 20 20/ 20 1 4 2.5 Description cable type see cable code definition (see next page) fiber type singlemode 9/125 m singlemode 9/125 low bend singlemode LEAF NZDS-fiber multimode G50/125 m multimode G50/125 m OM3 multimode G50/125 m OM3+/OM4 multimode G62.5/125 m multimode H200/230 m connector type connector left side connector right side total number of connectors 1 connector (pigtail) e.g.: duplex patchcord with 4 simplex connectors length of assembly length in meters (ferrule tip to ferrule tip) optical performance level 1st letter = connector left side 2nd letter = connector right side singlemode LAN-eco APC singlemode high-end APC singlemode 0.1 dB APC singlemode high-end UPC singlemode high power (APC/UPC) singlemode 0.1 dB UPC multimode singlemode LAN-ECO UPC singlemode MT no connector right side (pigtail)
A B C D E F M N P
A B C D E F M N P K
Performance level A B C D E F M N
x x x x
Performance level A B
C
x x
E
x x
M N
x x x x x x
54
55
Assembly Classes
HUBER+SUHNER cable assemblies stand for PERFORMANCE and RELIABILITY Features
Available in 3 singlemode attenuation classes to meet different customer requirements Full ceramic ferrules as a base for highest performance and reliability Optimized products and assembling processes due to HUBER+SUHNER in-house connector and cable development and manufacturing Outstanding mechanical and thermal strengths exceeding requirements of international standards
Applications
Compatibility
Connector quantity
Long haul transmissions, saving costs for signal All connectors are amplification tuned Low loss budget transmissions Fiber according to Transmissions where uniform channel losses ITU-T G.652-D are required IEC 60793-2-50 Splice alternative Premium ferrule
Attenuation
each-to-each measuring IL
1)
against reference measuring 0.15 dB 0.06 dB > 50 dB > 85 dB2) IEC 61300-3-4 max. 0.15 dB
RL
0.02 0.04 0.06 0.08 0.1 0.12 dB
Applications
CATV / Video Passive Optical Networks PON WDM /DWDM
Compatibility
All connectors are tuned acc. to IEC 61755-3-1/2, Grade B Fiber according to ITU-T G.652-D IEC 60793-2-50
Connector quantity
Attenuation
each-to-each measuring IL
1)
against reference measuring 0.25 dB 0.12 dB > 50 dB > 85 dB2) IEC 61300-3-4 max. 0.35 dB
RL
0.06 0.10 0.12 0.22 0.30 dB
Please note: 0.1dB Assemblies have max. losses lower than today's measurement accuracy in the field.
Measurement equipment (power meter/OTDR) and measurement set-up, reference cables and adapters, environmental conditions and dirt easily cause measurement uncertainities of > 0.2 dB. Reliable and reproducible measurements at accuracies below 0.1 dB are feasible under laboratory conditions only.
56
2)
Assembly Classes
Applications
Universal premises cabling according to IS 11801, EN 50173-1, EIA/TIA 568 Cost effective connections in PON FTTX, Data center
Compatibility
Connectors are not tuned Fiber according to ITU-T G.652-D IEC 60793-2-50
Connector quantity
Attenuation
each-to-each measuring IL
1)
against reference measuring 0.45 dB 0.20 dB > 50 dB > 85 dB2) IEC 61300-3-4 max. 0.35 dB
RL
0.03
0.1
0.18
0.25
0.36
0.5
dB
Multimode HQ
Applications
Universal premises cabling according to IS 11801, EN 50173-1, EIA/TIA 568 FTTX, Data center
Compatibility
Fiber according to ITU-T G.651 IEC 60793-2-10
Connector quantity
Attenuation
each-to-each measuring IL
3)
against reference measuring 0.50 dB 0.20 dB > 35 dB IEC 61300-3-4 max. 0.35 dB
RL
1) at 1310 nm measurement method 3(OLCR) 3) at1300 nm, Launch conditions acc. IEC 61300-1 2)
57
Assembly Classes
HighPower assemblies
Connector quantity
Applications
DWDM / CWDM Raman, EDFA amplifications Long haul transmissions saving costs for signal amplification
Compatibility
All connectors are tuned Fiber according to ITU-T G.652 Premium ferrule IEC 60793-2-50
against ref. 0.15 dB 0.06 dB IEC 61300-3-4 max. 0.15 dB
Attenuation
each-to-each IL
1)
RL
0.02 0.04 0.06 0.08 0.1 0.12 dB
UPC APC
1)
at 1310 nm
HighPower Assemblies are HUBER+SUHNERs answer to the ever-increasing transmission requirements of highperformance networks. Amplifiers used in DWDM applications can easily reach power levels of one Watt (30dBm). The optical power is concentrated on the fiber core of 10 m diameter which corresponds to power densities larger than 1.3MW/cm2. Slightest impurities or defects on the fiber end-face can thermally destroy the ferrule. The HighPower manufacturing process is characterized by stringent cleanness, premium polishing procedures, and special cleaning before packing. HUBER+SUHNERs HighPower assemblies guarantee maximal operational safety with their proven long term performance at average power levels up to 2 W and power peaks up to 5 W.
List of hazard levels (IEC 60825-2) at different power levels in singlemode fibers at 1310 nm wavelength
Level 1 1M 3R 3B 4 Optical power 15.6 mW 42.8 mW 80.0 mW 500 mW > 500 mW 12 dBm 16 dBm 19 dBm 27 dBm Hazard safe under all foreseeable conditions safe, but might be hazardous if magnifying instrument is used low risk to eyes and skin medium risk to eyes and low risk to skin high risk to eyes and skin, even for stray reflected light beams
The high-performance LSH (E-2000) and LX.5 connectors meet the most stringent handling and functional safety standards. The full metal protection cap guarantees maximum eye safety and no environmental laser hazard under unplugged and plugged conditions. The special locking and mechanical coding system avoids unintended or unauthorised plugging. Upon request SC and LC HighPower assemblies can be supplied. However these two connectors do not offer eye and laser safety as they have no shutter.
58
Assembly Classes
Full ceramic ferrule
HUBER+SUHNER connectors feature full ceramic ferrules. Only high precision full ceramic ferrules with tightest dimensional tolerances can ensure best possible optical performances as well as Reliability Stability (chemical, thermal, mechanical) Reproducibilty Compatibility
Endface geometry
Tight endface geometry tolerances guarantees the customer a reliable and reproducible quality and long term behaviour. Interferometric ferrule endface inspection is mandatory for controlled and mastered manufacturing processes. Upon request a Quality Control Report can be issued for each assembled connector.
59
HUBER+SUHNER solution
The premium PM assemblies of HUBER+SUHNER use a special connector design and an improved innovative tuning method to achieve simultaneously excellent insertion loss, return loss and Extinction Ratio (ER) performances. We realize exact alignment of the polarization direction in respect to the connector body optimizing the ER using proprietary active alignment processes. Thereby ER ratios of well above 23dB are reached, which corresponds to a misalignment of the slow axis to the connector key of smaller than +/3 degree.
Application
Fiber optic links that have the capability to manage the state of the polarization have been usefully applied in many areas of the industry. For example, PM fiber links are usefully employed in high speed optical networks where many of the optical components are polarization sensitive. HUBER+SUHNER polarization maintaining premium assemblies can be used in a range of application including: Connectivity between polarization sensitive in-line optical components such as lasers, modulators and amplifiers Fiber optic sensors, interferometers, probes and other test and measurement equipment Fiber Optic based Gyroscopes (FOG) Raman gain amplifier and high power fiber lasers for optical links, key components in ultra-long haul and 40 Gb/s systems PM passive components such as splitters and couplers PMD compensator
Key
0<3
Slow axis
60
To reference connector; Panda fiber for 1550nm Might be further limited by cable construction
Features
Dedicated labeling including IL, RL, and ER measurement records. Exact core position record (concentricity and angle deviation) upon request. Standard assemblies are based on Panda fiber for 1550nm, other fiber types and wavelengths upon request
Ordering information
Description cable type 04A01VX0 09A01DT0 21H01DG0 27H01DG0 P1 30/ 33/ 34/ 70/ 73/ 90/ 93/ 2 1 23 09A01DT0 P1 30/30 2 1 23 fiber 0.9 mm tube, transparent 2.1 mm LSFH cable, black 2.7 mm LSFH cable, black fiber type PM 1550 with UV/UV 400 m (standard) connector type 1st side/2nd side FCPC (wide key) FCPC APC 8 (wide key) FCPC APC 8 (small key) SC SC APC 8 E-2000 (LSH) E-2000 (LSH) APC 8 total number of connectors terminated on both ends length of assembly 1 meter ER performance extinction ratio 23 dB (standard) example
61
Solutions for harsh environment Connectors overview QODC ODC 2 ODC 4 XCO EBC connectors Protection boot
64 66 68 70 74 78 80 82
63
IP
First characteristic numeral Second characteristic numeral
First numeral
0 1 2 3 4 5 6
Second numeral
0 1 2 3 4 5 6 7 8
12.5 mm 2.5 mm 1 mm
dust-protected dust-tight
Operating temperature
10 C to +60 C 25 C to +70 C 40 C to +85 C
Relative humidity
5% to 85% 10% to 100% 0% to 100%
64
Ground defence
Shock, vibration, salt mist, mud, etc. are typical challenges for these types of applications. The expanded beam connector EBC guarantees fast, easy, and reliable connections even under worst conditions. Harsh environment connectors can be terminated on mobile cables and reels being suitable for temporary cable installations.
65
Technical data
Q-ODC
ODC -2
Technology Number of fibers Protection class Fiber types Operating temperature1) Mating durability
full ceramic 1.25 mm ferrule and sleeve 2 IP68 singlemode and multimode 40 C up to +85 C 2002) 02-.../FSN(ZN)Z-G55 02-.../FSN(ZNG)H-G55 02-.../FSN(ZNG)H-G70 02-.../FJ(ZN)Z-G17 2x 01-/FJU-...19 tensile load 450 N plug 30 N socket snap-on singlemode typ. 0.20 dB 97% 0.45 dB multimode typ. 0.20 dB 97%. 0.50 dB singlemode 50 dB
full ceramic 1.25 mm ferrule and sleeve 2 IP68 singlemode and multimode 40 C up to +85 C 10002) 02-/FSN(ZN)Z-G55 02-.../FSN(ZNG)H-G55 02-.../FSN(ZNG)H-G70 02-/FJ(ZN)Z-G17 2x 01-/FJU-...19 tensile load 800 N plug 30 N socket screwed singlemode typ. 0.20 dB 97% 0.45 dB multimode typ. 0.20 dB 97%. 0.50 dB singlemode 50 dB
66
ODC -4
XCO
EBC
full ceramic 1.25 mm ferrule and sleeve 4 IP68 singlemode and multimode 40 C up to +85 C 10002) 04-/FSN(ZN)Z-G55 04-.../FSN(ZNG)H-G55 4x 01-/FJU-...19 tensile load 800 N plug 30 N socket screwed singlemode typ. 0.20 dB 97% 0.45 dB multimode typ. 0.20 dB 97% 0.50 dB singlemode 50 dB
LC with full ceramic ferrules 2 IP67 singlemode und multimode 40 C up to + 85 C 500 02-.../FSN(ZN)Z-G55 02-.../FSN(ZNG)H-G55 02-.../FSN(ZNG)H-G70 tensile load 500 N screwed singlemode typ. 0.20 dB 97% 0.45 dB multimode typ. 0.20 dB 97%. 0.50 dB singlemode 50 dB
hermaphroditic expanded beam 2 and 4 IP67 singlemode and multimode 40 C up to +85 C 2000 02-/FSN(ZN)Z-G56 04-/FSN(ZN)Z-G56
tensile load 1500 N 500 free falls from 1.2 m height screwed singlemode multimode singlemode max. 2.0 dB max. 1.5 dB typ. 25 dB
67
Specifications
Technology Housing material Mating mechanism Mechanical performance Operating temperature1) Q-ODC plug Q-ODC socket IEC 61300-2-22 IEC 61300-2-2 IEC 60529 IEC 61300-2-26 IEC 61300-2-1 IEC 61373 IEC 61300-2-9 IEC 61373
2)
full ceramic ferrule and sleeve nickel-plated brass push-pull with two clearly defined states 450 N tensile load 30 N static side load 30 N tensile load 40C up to + 85 C 200 cycles2) IP68 30 days passed passed 10 Hz 500 Hz / 10 g passed category 1A/B, 2, 3 passed 50 g passed category 1, 2
Optical performance
Insertion loss / IEC 61300-3-34 Return loss singlemode multimode singlemode typ. 0.20 dB typ. 0.20 dB 50 dB 97% 0.45 dB 97% 0.50 dB
Mating sequence
68
hole pattern
Connector
Dust cap
push-on IP 54 IP 68 IP 68 IP 65 IP68 IP68 IP 65 IP68 IP68
QC
QB QE QF QG QS QT QU
Q-ODC plug
Q-ODC extension
69
Specifications
Technology Housing material Mechanical performance Installation torque force Operating temperature1) Mating durability Ingress protection (mated) Salt mist Vibration Shock
1)
full ceramic ferrule and sleeve nickel-plated brass ODC plug ODC socket min. 1 Nm IEC 61300-2-22 IEC 60529 IEC 61300-2-26 IEC 61300-2-1 IEC 61300-2-9
2)
800 N tensile load 30 N static side load 30 N tensile load max. 2 Nm 40C up to + 85 C 1000 cycles2) IP68 30 days passed passed 10 500 Hz / 10g passed 100 g
Optical performance
Insertion loss IEC 61300-3-34 Return loss
Standard type A1, A4: ODC-2 plug
70
Standard type B3, B4: ODC-2 socket hexagonal, mounted from the rear hole pattern
hole pattern
NON-standard type B5, B6: ODC-2 socket hexagonal, mounted from the front, previous version (will be phased out)
hole pattern
hole pattern
71
Connector
Dust cap
screwed cap with chain
E1
screwed cap
screwed cap
B3
B4
screwed cap
B5
B6
screwed cap
screwed cap
72
3 MASTERLINE classic
7 ODC extension assemblies 6 Overlength boxes to store excess cable length up to 30 m for full length and installation flexibility.
3 1 7
2
1 Base station 2 CTB 19" frame, patched or spliced solution
73
Specifications
Technology Housing material Mechanical performance Installation torque force Operating temperature1) Mating durability Ingress protection (mated) Salt mist Vibration Shock
1)
full ceramic ferrule and sleeve nickel-plated brass ODC-4 plug ODC-4 socket min. 1 Nm IEC 61300-2-22 IEC 60529 IEC 61300-2-26 IEC 61300-2-1 IEC 61300-2-9
2)
800 N tensile load 30 N static side load 30 N tensile load max. 2 Nm 40C up to + 85 C 1000 cycles2) IP68 30 days passed passed 10 500 Hz / 10g passed 100 g
Optical performance
Insertion loss IEC 61300-3-34 Return loss
Type J2, J3: ODC-4 plug
74
hole pattern
Connector
Dust cap
screwed cap with pulling feature
screwed cap
screwed cap
screwed cap
75
ODC Assemblies
Features
ODC-2, ODC-4, Q-ODC Robust minicord-breakout or field cable Broad range of additional cables Halogen free and low smoke UL OFNR rated cables available Highest mechanical resistance All cable assemblies factory tested RoHs compliant
Connector type
ODC-2, Q-ODC plug and extension
Cable type
02-/FSN(ZN)Z-G55 02-.../FSN(ZNG)H-G553) 02-.../FSN(ZNG)H-G702) 02-.../FJ(ZN)Z-G17 02.../FSN(ZN)HZ-G70 04-/FSN(ZN)Z-G55 04-.../FSN(ZNG)H-G553) 04-/FSN(ZN)HZ-G70 2 01-../FJU... 4 01-../FJU...
Operating temperature
40 C up to +85 C 40 C up to +75 C 40 C up to +75 C 40 C up to +80 C 40 C up to +85 C 40 C up to +85 C 40 C up to +75 C 40 C up to +85 C 40 C up to +85 C 40 C up to +85 C
1) X to be replaced with G in case of singlemode and with 0 for multimode 2) UL OFNR rated cables 3) Fulfills UL1666 requirements 4) Cable type 02-E9/FSN(ZN)HZ-G70-L for singlemode. Specified temperature range at 1310 nm.
Ordering information
09Z02FG0 09 50 62 A4/88 cable type fiber type connector left side/connector right side A1, A4 C1, C3 C6, C8 B5, B6 E1, E3 J2, J3 K2, K3 K6, K7 E4, E6 QA, QB, QC QS, QT, QU QE, QF, QG 88 X1 XX total number of connectors length of assembly [m] performance level (left/right) MM NN see table above singlemode E9/125 m multimode G50/125 m multimode G62.5/125 m ODC-2 plug ODC-2 socket square small ODC-2 socket square large ODC-2 socket hexagonal ODC-2 extension ODC-4 plug ODC-4 socket hexagonal ODC-4 socket square small ODC-4 extension Q-ODC plug Q-ODC socket Q-ODC extension LC duplex XCO connector other connector type see connector code
x x xx
multimode singlemode
76
Type
FIBER OPTIC CLEANING KIT QbE FO cleaning system FW2150 Electro-Wash MX Pen 51121 Cleaning Swab Cleaner, IBC, 1.25 mm Cleaner, IBC, 2.5 mm 74_Z-0-0-321
Item number
84038056 84041085 84041105 84041108 84064486 84095170 84016417
Type
TOOL-MEAS-LIGT-CHECK TOOL-MEAS-LIGT-CHECK-ADA-1-25
Item number
23032064 84041807
Installation accessories
Description
Excess length boxes
Features
outdoor installation store up to 20 m cable excess length easy mountable IP66 outdoor installation
Item number
84063560
FTTA box Quick hose clamp for FTTA box (stainless steel)
with patched or spliced solution multi-cable entry and exit Clamping diameter 30 155 mm Clamping diameter 60 500 mm cable diameter 5.5 mm
consisting of body, seal, locking dome nut and counter nut M25 1.5 build-in dimensions one cable, diameter 5 6 mm one cable, diameter 6 7 mm
84075503
77
Specifications
Technology Housing material Mating mechanism Mechanical performance Operating temperature1) Mating durability Ingress protection (mated) Salt mist Vibration Shock
1)
LC with full ceramic ferrules nickel-plated brass snap-in strain relief system 500 N tensile load 30 N static side load 40 C up to +85 C IEC 61300-2-2 IEC 60529 IEC 61300-2-26 IEC 61300-2-1 IEC 61300-2-9 500 cycles IP67 30 days passed passed 10 Hz 500 Hz / 10 g passed 50 g
Optical performance
Insertion loss Return loss singlemode multimode singlemode typ. 0.20 dB typ. 0.20 dB 50 dB 97% 0.45 dB 97% 0.50 dB
Mating sequence
Remove LC dust caps and plug LC duplex connectors into SFP module
78
hole pattern
Description
Connector
Dust cap
X1
XCO connector
IP67
IP67
Top view
PCB Cage
Front face of housing Transceiver Lateral mounting tolerance between SFP module and XCO flange = 0.5 mm
recommended 0.2
79
Specifications
Technology Mechanical performance1) Free fall resistance Operating temperature1) IEC 61300-2-22 Storage temperature1) Mating durability Ingress protection (mated)
1)
hermaphroditic expanded beam system 1500 N tensile load 500 drops from 1.2 m height 40 C up to +85 C 55 C up to +85 C min. 2000 cycles IEC 60529 IP67
Optical performance
Insertion loss Return loss singlemode multimode singlemode (1310 nm / 1550 nm) (850 nm / 1300 nm ) max. 2.0 dB max. 1.5 dB typ. 25 dB
EBC plug
EBC bulkhead
hole pattern
Note: Some of the dimensions of EBC for singlemode vary slightly from the given values.
28.3 0.1
80
30.2 0.1
fiber type
connector left side/connector right side P1 P2 P5 P6 XX x x xx total number of connectors length of assembly [m] performance level (left/right) QQ RR multimode singlemode
Please note: different types of expanded beam connectors are available on request.
Application example
The EBC cable assemblies can be coiled on mobile cable reels or on mobile military backpacks used for ground defence. The backpack system withstands hardest environmental conditions and is tested for outstanding shock and vibration conditions
Features
Mobile systems available with ODC, Q-ODC and EBC Easy unlocking mechanism for removal of cable reel
Specifications
Weight Outer diameter of cable reel Maximal cable assembly length Mechanical resistance empty cable reel and frame 700 m cable 6 mm 410 mm 700 m shock vibration 30 g, 11 ms according to MIL-STD 810D method 514.3 11.0 kg 19.6 kg
81
Protection Boot
Protection class IP65 for fiber optic connectors 1 2
The use of fiber optic connectors with boot (1) and adapter seal (2), allow a detachable fiber optic connection with IP 65 protection class. This combination is specially suitable for outdoor connections. The boot can be used with cables of diameters 2.1 mm only.
Ordering information:
Description
1 Boot for SC, LSH (E-2000), LX.5 duplex, LC duplex Boot for ST, FCPC, FSMA Adapter seal ST 2 Adapter seal FCPC Adapter seal FSMA
Type
MOB-SYS-007 MOB-SYS-008 MOB-SYS-001 MOB-SYS-002 MOB-SYS-004
82
Field Termination
Quick assembly QXA QXA basic components Spare parts, accessories and consumables Tool kit
86 88
89 92
85
Features
Spliceless termination for long term reliable performance Quick termination process in 90 seconds, no set-up time Termination with just two hands, even in unfriendly working conditions Termination of 0.9 mm tubes and ruggedized cables Reliability and durability equal to factory termination Termination processes adapted to all fiber types and performance levels, including angled physical contact (APC) All-in-one multifunction tool Easy-to-carry tool box for maximum mobility Enhanced connector design for easy termination
Applications
Fiber-to-the-desk / fiber-to-the-office installations Fiber-to-the-home installations CATV networks Repair and maintenance of all kind networks Temporary joints in mobile point to point connections Joints inside industrial connectors
Specifications
QXA connectors Ferrule type Fiber type Insertion loss mean Insertion loss 97% Typ. return loss Connector interface Attenuation measurement Ferrule material Environmental category Wiring applications Maximum optical power Maximum cable diameter Cable strain relief Operating temperature Minimum mating durability Flammability
86
Connector type ST MM preradius G50/125 G62.5/125 0.30 dB 0.50 dB 20 dB 0.30 dB 0.50 dB 26 dB ST SM-PC preradius E9/125 SC MM preradius G50/125 G62.5/125 0.30 dB 0.50 dB 20 dB IEC 61300-3-4 full ceramic IEC 61753 category C controlled environment EN50173 A D, ESA/TIA568A 150 mW 2.8 mm 70 N 25 C to +70 C, depending on cable 1000 cycles all materials comply with UL 94 V-0
HUBER+SUHNER FIBER OPTICS
ST
SC
not available
12.7
24.7
56.0
12.7
see page 28
11.5
Ordering item
Package unit
ST MM connectors
25 connectors, boots
FST-QXA-A001
ST SM-PC connectors
FSC-QXA-B001 SC MM connectors
87
Ordering item
Package content basic tool, heating unit, fiber cleaver, adhesive cartridge, EU power line adaptor, operators manual, termination instructions
Ordering information
QXA-015-230-de/en
basic tool, heating unit, fiber cleaver, adhesive cartridge, US power line adaptor, operators manual, termination instructions QXA-015-115-de/en
connector specific clamping head ST type QXA-001 QXA toolbox, cable stripper, aramid scissors, cleaning tissues, handheld microscope, fiber marker kit, fiber prepolishing kit and face polishing kit QXA-004 SC type QXA-002
88
9801.48.C
50 gray films, flexible supporting sheet QXA-020 50 pink films, stiff supporting sheet, polishing aid ST-PC, polishing aid SC-PC QXA-021
QXA-013
Cable stripper
combined tube & jacket stripper, self-adhesive stripping length scales 9801.22.C
Aramid scissors
89
microscope 9801.80.G
Adhesive cartridge
Cleaning tissues
90
91
Tool Kit
Features
Field termination set for all HUBER+SUHNER connectors Termination set individually configurable depending on connector types and personal needs Termination technology: epoxy glueing and thermal curing Efficient termination with 5-fold polishing jigs
Description Field termination set including all standard tools Spare parts and tools Tool box (without content) Coating stripper to remove 125m coating Fiber cleaving tool (cleaver) Universal knife T-stripper small (strip and remove 0.9mm buffer) T-stripper large (strip and remove cable jacket) Cable cutter Aramid scissors Ruler (measure stripping lengths) Crimp tool for 4.95 mm / 3.3 mm / 2.0 mm crimp sleeve Screwdriver Glue kit (5x Epotek 360 with cannula, 5 syringe and 5 needle) Cleaning tissues (content: 75 pcs.) Bottle for spirit, empty Bottle for distilled water, empty Bottle for isopropanol, empty Polishing pad Polishing support plate (glass) Microscope Lamp for microscope Operating manual
Type 9801.90.P 9801.95.A TOOL-STRP-COAT-125 TOOL-CLVE-TOOL TOOL-CUT-KNIFE TOOL-STRP-T-SM TOOL-STRP-T-MED TOOL-CUT-PLIERS TOOL-CUT-SCISS TOOL-STRP-RULER TOOL-CRIMP-H+S 9801.41.A TOOL-GLUE-KIT-5-P TOOL-CLN-TISSUES-6X6 9801.62.B 9801.62.C 9801.62.D TOOL-POL-RUBP-V/70-SHORE TOOL-TUN-REP-GLASS-PLATE 9801.80.A 9801.81.A 52.23.0150.4
Item no. 22651699 22645536 9801.10.E 22648937 9801.12.A 22642285 9801.20.E 22646062 9801.22.A 22642284 9801.22.B 22645547 9801.24.B 22645538 9801.24.D 23020097 9801.32.A 22642282 9801.35.H 84005604 22645537 9801.53 F 84024497 9801.60.A 22644173 22645749 22645750 22651952 9801.75.V 84006578 9801.70.C 22644172 22644165 22646352
92
Tool Kit
Polishing jigs
Description FCPC, for 5 connectors Type 9801.75.C Item no. 22645525
9801.70.A
22643645
9801.70.B
22643646
9801.75.U
23012163
9801.75.B
22645526
9801.75.R
22651697
9801.75.H
23038101
9801.75.A
22645527
9801.75.P
22651564
Curing adapters
Description FSMA (3.17 mm metallic ferrule) LX.5, LC (1.25 mm ceramic ferrule) SC, ST, FCPC, LSA, LSH (2.5 mm ceramic ferrule) ST-SECURITY (2.5 mm ceramic ferrule) Type TOOL-CURE-ADA-FSMA TOOL-CURE-ADA-1.25 TOOL-CURE-ADA-2.5 TOOL-CURE-ADA-FST-SEC Item no. 9801.30.F 22649337 9801.31.B 23016760 9801.30.O 22646869 9801.30.P 22649101
93
Tool Kit
Field termination polishing films and polishing supports
For connector types: E-2000, SC, pre-radius 2.5 mm FCPC, ST PC ferrule, zirconia LSA flat 2.5 mm PC ferrule, zirconia Description Polishing films pre-polish (5m sc5) main polish (1m d1) finish (0.5m sf5d) Polishing support LX.5, LC flat 1.25 mm PC ferrule, zirconia rubber support, shore A 70 TOOL-POL-RUBP-V/70-SHORE 9801.75.V 84006578 9801-71-H 50-PCE/SET TOOL-POL-PAPR-D1 15-PCE/SET 9801-76-K 10-PCE/SET 9801.71.H 50-p. 23011871 9801.76.F 15-p. 23020666 9801.76.K 10-p. 22649508 Type Item no.
FSMA
TOOL-TUN-REP-GLASS-PLATE
9801.70.C 22644172
94
Tool Kit
Accessories and consumables
Description Connector specific tools Press tool LSH connector housing; for pigtails Press tool LSH connector housing; for patchcords Heating box Heating box, 24-fold (220/230 V) Polishing tools Universal polishing tool (plastic disc) for 2.5 mm ferrule connectors Universal polishing tool (metal disc) for 1.25 mm ferrule connectors Microscope adapter for 9801.75.Q Connector specific accessories E-2000 service adapter Glueing consumables Epotek 360 (25 packs with cannulas) Needle 50 pcs. Syringe 25 pcs. Cannulas 25 pcs. Accessories Universal teflon adapter (10 pcs./bag) Tube cutter (Miller) (remove tubes up to 270 m) Cable divider mounting tools Circular cutter (cut outdoor cable-jackets 330 mm) Circular cutter for 3 mm loose tube outdoor cables 9801.20.B 9801.20.C 22645535 22645747 TOOL-GLUE-ADAPTER TOOL-STRP-TUBE-CUT-270 9801.52.V 9801.10.F 23038417 23017371 TOOL-GLUE-EPOTEK360 TOOL-GLUE-NEEDLE TOOL-GLUE-SYRINGE TOOL-GLUE-CANNULA 9801.50.L 9801.52.W 9801.52.Y 9801.52.2 84024504 84024505 84024506 84029277 9801.36.K 9801.36.K 84024516 TOOL-POL-HJIG-2.5 TOOL-POL-HJIG-1.25 9801.80.F 9801.75.Q 9801.75.S 9801.80.F 22648606 84013158 22651004 TOOL-CURE-BOX-ROUND 9801.55 M 23011619 TOOL-SPEC-FLSH-PRESS-0.9 9801.36.G 23001406 23001405 TOOL-SPEC-FLSH-PRESS-CABLE 9801.36.F Type Item no.
95
Type
FIBER OPTIC CLEANING KIT
Item number
84038056 84041085 84041105 84041108 84064486 84095170
Technical specification
Wavelength Output power 9 m singlemode fibers 50 m multimode fibers 635 nm 0.3 mW 0.7 mW
Ordering information
Description Fiber check tool for 2.5 mm ferrule connectors incl. universal adapter for SC, E-2000, ST, FCPC and DIN (not compatible with FSMA) Adapter for 1.25 mm ferrule Type TOOL-MEAS-LIGT-CHECK TOOL-MEAS-LIGT-CHECK-ADA-1.25 Item no. 9801.86.A 23032064 9801.86.C 84041807
96
Equipment for serial production Polishing machine Measurement fiber box Master cables
99
s ble Ca
Visu
al in s
pec t io
Curing glue
Assembly tuning
Cr
im pin gt er m
inati on
30 25 20 15 10 5 0
Frequency
9.7
10.4
11.1
11.8
12.5
13.2
13.9
14.6
Frequency
30 25 20 15 10 5 0
25
20
15
10
10
15
Frequency
30 25 20 15 10 5 0
100
Easy handling
LCD screen for easy programming and process management Pivoting arm for easy access and cleaning User-friendly and easy to adjust 100 programmes individually programmable
Economical criteria
Maintenance-free No dummies needed due to fully adjustable pressure until 0.1 N per connector Short polishing times Automatic and precise polishing High yield with high quality of ferrule end face
Further features
Programmes can be downloaded via interface RS 232 from PC or laptop 1.25 mm and 2.5 mm ferrules APC and PC polish Power supply =115 VAC/60HZ; 230 VAC/50 HZ Weight 28 kg Size: L=60 cm/W=52 cm (incl. keyboard)/H=36 cm Number of connectors min. 3; max. 16 Base diameter 5 inches
E2000 is manufactured under licence of DIAMOND SA, CH LOSONE
101
Two-unit box for launch and tail fiber in one box 240 197 117 mm
Same case for standard box and two-unit box Type 9801.90.N Item no. 23036601
102
Connector type
Connector1) side A - input launch fiber Connector1) side B - output launch fiber
Cable type
Without cable 2.1 mm LSFH, black 3.4 mm PE, black
Cable lenght
Without cable, only with adapters2) Standard length (1.5 m) 1 m (minimum length) 2m 5 m (maximum length) No tail fiber (= 1 height unit)
53 54 62 20 01
1) 2)
Connector type
Connector1) side A - input tail fiber Connector1) side B - output tail fiber
103
Measurement method:
IEC 61300-3-4
Items included
Master cable, length 3 m Label with serial number guarantees for traceability Test certificate HUBER+SUHNER fiber optic master cables can be returned to repolish the ferrules and to update test parameters. However, master connectors can only be repolished as long as the ferrule length does not fall below the minimum length indicated in the appropriate connector standard.
Technical specification of reference connectors Ferrule outer diameter tolerance Dome offset of spherically polished ferrule endface Undercut / protrusion Eccentricity of fiber core centre to ferrule centre Deviation of axis of fiber to axis of ferrule Attenuation between two reference connectors at 1310 nm Return loss between two reference connectors at 1310 nm Visual examination
1)
0.5 m for all reference connectors for all reference connectors 30 m 50 nm 0.3 m < 0.2 0.1 dB PC APC > 58 dB > 85 dB1) every 50 matings
IEC 61300-3-6, method 3 (OLCR)
104
Notes
105
Notes
106
Additional catalogues
Cables Item no. 84019826 Indoor cables universal cables Outdoor cables Special cables
System LiSA Item no. 84101814 Optical distribution racks Fiber containment Outdoor cabinets Optical closures Wall cabinets Subracks and modules Fiber management accessories Cable system solutions Cabling Systems Item no. 23029084 Pre-terminated cabling systems Masterline Smartline Mobile cabling system
Passive Components Item no. 84019859 Couplers and splitters Multiplexers (WDM) Attenuators PDF version available only.
WAIVER It is exclusively in written agreements that we provide our customers with warrants and representations as to the technical specifications and/or the fitness for any particular purpose. The facts and figures contained herein are carefully compiled to the best of our knowledge, but they are intended for general informational purposes only.
84101808/04.2010
HUBER+SUHNER is certified according to ISO 9001, ISO 14001, ISO/TS 16949 and IRIS.
HubEr+SuHnEr AG Fiber Optics Division Degersheimerstrasse 14 9100 Herisau Switzerland Tel. +41 71 353 4111 Fax +41 71 353 4647 info@hubersuhner.com