Beruflich Dokumente
Kultur Dokumente
2011
2. Frequency/revolution in an alternator is equal to a.No of poles conductors c.No of pair of poles the above b.No of d.None of
8. Stator core of an alternator is made up of _______laminations 9. With low and medium speed prime movers ________ type of rotors is generally used 10. The emf generated in an alternator depends upon__________ 11. When the load of an alternator is thrown off the terminal voltage will___________ 12. Skew of rotor bar eliminates_________ 13. The Stator of recent alternators are wound for a. 1800 phase groups current by 900 b.lags the
3. Alternators usually driven by a.Steam Engines c.Water turbines b.Steam turbines d.both c & d
4. Cylindrical type rotors usually designed for a.2 poles c.8 poles b.4 poles d.both a and b
5. The rotor of the alternator has a. Two split rings c. Two slip rings rings b. Four slip rings d. no slip
c. in phase with current d. lags the current by 14. In an alternator the short circuit current is limited by __________ 15. An unexcited single phase synchronous Motor is _________motor 16. Synchronous Motors are usually operated at
6. The stator frame of an alternator is made by a. silicon steel c. cast iron steel b. cast steel
d. Laminated carbon
SURYA ENGINEERING COLLEGE, ERODE-638107 Department of EEE Placement and Training Cell DATE:02.07.2011
4) Define VARIAC.
5) What is the reason for using HVDC transmission in Power Generating station?
6) Is 415v=11kv? Why?
SURYA ENGINEERING COLLEGE, ERODE-638107 Department of EEE Placement and Training Cell DATE:02.07.2011
1) An SCR is a -------------terminal ----------Layer device. 2) A rectangular pulse of high amplitude and narrow width is applied to a SCR, the turn on time can be------ ---