Beruflich Dokumente
Kultur Dokumente
DEH-P4550
Model No. CX-3026 Order No. CRT2944
ORDER NO.
DEH-P350/XM/UC
CRT2984
DEH-P350 DEH-P3500
XM/UC, XN/UC XM/ES, XN/ES
XM/UC, XN/UC
- This service manual should be used together with the following manual(s):
Mech. Module Remarks S10 CD Mech. Module:Circuit Description, Mech.Description, Disassembly
PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A. PIONEER EUROPE NV Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 253 Alexandra Road, #04-01, Singapore 159936 C PIONEER CORPORATION 2002
K-ZZA. NOV. 2002 Printed in Japan
SAFETY INFORMATION
CAUTION This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician.
WARNING This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to cause cancer, birth defects or other reproductive harm. Health & Safety Code Section 25249.6 - Proposition 65
In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely. When you find the procedures bearing any of the symbols, be sure to fulfill them:
1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual.
2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable. In accordance with the procedures or instructions described in this manual, adjustments should be performed.
3. Cleaning
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning, proper cleaning should be performed to restore their performances.
Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed ones should be used.
2 1 2
DEH-P350/XM/UC
CONTENTS
SAFETY INFORMATION ............................................................................................................................................2 1. SPECIFICATIONS .......................................................................................................................................................4 2. EXPLODED VIEWS AND PARTS LIST.......................................................................................................................8 2.1 PACKING(DEH-P350/XM/UC, DEH-P350/XN/UC, DEH-P3500/XM/UC, DEH-P3500/XN/UC) ...........................8 2.2 PACKING(DEH-P4550/XM/ES, DEH-P4550/XN/ES) ..........................................................................................10 2.3 EXTERIOR...........................................................................................................................................................12 2.4 CD MECHANISM MODULE ...............................................................................................................................16 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM ...................................................................................................18 3.1 BLOCK DIAGRAM ..............................................................................................................................................18 3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE) ........................................................................................20 3.3 KEYBOARD UNIT ...............................................................................................................................................26 3.4 CD MECHANISM MODULE ...............................................................................................................................28 4. PCB CONNECTION DIAGRAM ................................................................................................................................32 4.1 TUNER AMP UNIT .............................................................................................................................................32 4.2 PANEL UNIT .......................................................................................................................................................36 4.3 KEYBOARD UNIT ...............................................................................................................................................37 4.4 CD MECHANISM MODULE ...............................................................................................................................38 5. ELECTRICAL PARTS LIST ........................................................................................................................................40 6. ADJUSTMENT .........................................................................................................................................................44 6.1 CD ADJUSTMENT .............................................................................................................................................44 6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT................................................................46 6.3 ERROR MODE ....................................................................................................................................................48 7. GENERAL INFORMATION .......................................................................................................................................49 7.1 DIAGNOSIS ........................................................................................................................................................49 7.1.1 DISASSEMBLY ..............................................................................................................................................49 7.1.2 CONNECTOR FUNCTION DESCRIPTION ....................................................................................................51 7.2 PARTS .................................................................................................................................................................52 7.2.1 IC ....................................................................................................................................................................52 7.2.2 DISPLAY.........................................................................................................................................................60 7.3 OPERATIONAL FLOW CHART...........................................................................................................................61 7.4 CLEANING ..........................................................................................................................................................62 8. OPERATIONS ...........................................................................................................................................................63
DEH-P350/XM/UC
3 7 8
1. SPECIFICATIONS
A
4 1 2
DEH-P350/XM/UC
DEH-P350/XM/UC
5 7 8
6 1 2
DEH-P350/XM/UC
DEH-P350/XM/UC
7 7 8
NOTE:
- Parts marked by * are generally unavailable because they are not in our Master Spare Parts List. - Screws adjacent to mark on the product are used for disassembly. - For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions, apply as you think it appropriate.)
Part No. CDE7154 CEA3376 CBH1650 CEA3445 BPZ20P060FZK CBA1002 CEG-127 CRZ50P090FTC TRZ50P080FTC CEG-158 CNC5395 CND1249 CND1250 CNV3930 CEG1173
Mark No. Description * 16 17 18 19 20 Battery Carton Contain Box Protector Protector Owners Manual Installation Manual Warranty Card Card Caution Card
Part No. CEX1065 See Contrast table(2) See Contrast table(2) CHP2663 CHP2664 See Contrast table(2) See Contrast table(2) See Contrast table(2) See Contrast table(2) See Contrast table(2) CXB3520 CXC1265
1 2 3 4 5 * * 6 7 8 9 10 11 12 13 14 15
8 1
Cord Assy Accessory Assy Spring Screw Assy Fixing Screw Screw Polyethylene Bag Screw Screw Polyethylene Bag Handle Holder Holder Bush Polyethylene Bag
DEH-P350/XM/UC
(2) CONTRAST TABLE DEH-P350/XM/UC, DEH-P350/XN/UC, DEH-P3500/XM/UC and DEH-P3500/XN/UC are constructed the same except for the following:
Part No. DEH-P3500/XM/UC CHG4788 CHL4788 CRD3699 CRD3700 Not used ARY1048 CRP1294
Symbol and Description Carton Contain Box Owners Manual Installation Manual Warranty Card
DEH-P350/XM/UC CHG4787 CHL4787 CRD3697 CRD3698 CRY1070 Not used Not used
Symbol and Description Carton Contain Box Owners Manual Installation Manual Warranty Card
DEH-P350/XN/UC CHG4931 CHL4931 CRD3697 CRD3698 CRY1070 Not used Not used
Part No. DEH-P3500/XN/UC CHG4930 CHL4930 CRD3699 CRD3700 Not used ARY1048 CRP1294
DEH-P350/XM/UC
9 7 8
Part No. CDE7154 CEA3439 CBH1650 CEA3437 CBA1002 CEG-127 CRZ50P090FTC TRZ50P080FTC CEG-158 CNC5395 CNV3930 CEG-162
Part No. CEX1065 CHG4790 CHG4932 CHL4790 CHL4932 CHP2663 CHP2664 CRD3701 CRD3702 CRD3703 CXB3520 CXC1265
Cord Assy Accessory Assy Spring Screw Assy Screw Polyethylene Bag Screw Screw Polyethylene Bag Handle Bush Polyethylene Bag
* *
6 7 8 9 10 11 12 13 14 15
10 1 2
DEH-P350/XM/UC
DEH-P350/XM/UC
11 7 8
2.3 EXTERIOR
12 1 2
DEH-P350/XM/UC
Part No. CNV7400 CNV7401 CNV7402 CNV7403 CWM8758 CKS3550 CKS4462 CXB9501 CXB9502 CXB9503 CXX1691 IMS20P045FZK See Contrast table(2) BPZ20P060FTC BPZ20P100FZK See Contrast table(2) CAC7728 CAC7729 CAC7730 CAC7751
C
See Contrast table(2) CDE7154 CD Mechanism Module(S10) CXK5600 Case CNB2793 Holder CNC8915 Cushion Insulator Insulator Insulator Panel Tuner Amp Unit Screw Screw Screw Fuse(10A) FM/AM Tuner Unit Holder Pin Jack(CN352) Plug(CN901) Plug(CN351) Connector(CN101) Plug(CN801) Connector(CN651) Antenna Jack(CN401) Holder Holder Insulator Heat Sink Holder Unit Chassis Unit Button(EJECT) Screw(M2x2) Washer Spring Spring Spring Spring Spring Holder Cover Panel Gear Pin Lighting Conductor CNM4870 CNM7682 CNM7935 CNM8174 See Contrast table(2) See Contrast table(2) ASZ26P060FTC BPZ26P080FTC BSZ26P160FTC CEK1208 CWE1646 CND1054 CKB1051 CKM1376 See Contrast table(2) CKS3408 CKS3537 CKS3835 CKX1056 See Contrast table(2) CND1352 CNM8245 CNR1668 See Contrast table(2) CXB9528 CAC7752 CBA1176 CBF1038 CBH2650 CBH2651 CBH2652 CBH2653 CBL1512 CND1254 CNM6854 CNS7245 CNV5997 CNV6486 CNV6487
See Contrast table(2) CBH2654 CBL1470 CNM8291 CNS7247 CNV7405 CWM8607 CAW1755 CKS4524 CND1215 CNM7921 CNV7365 CNV7406 CXB9924 CXB9925 See Contrast table(2) CXC1265 CNS7068 ISS26P055FTC See Contrast table(2) See Contrast table(2) PAL007A CTH1280 2SD2396
E D
Sub Grille Assy Remote Control Unit Cover Screw Screw Holder IC(IC301) Choke Coil(L301)
Transistor(Q651, 911, 921)
DEH-P350/XM/UC
13 7 8
(2) CONTRAST TABLE DEH-P350/XM/UC, DEH-P350/XN/UC, DEH-P3500/XM/UC, DEH-P3500/XN/UC, DEH-P4550/XM/ES and DEH-P4550/XN/ES are constructed the same except for the following:
Part No. DEH-P3500/XM/UC Not used CNS6934 CWM8594 Not used CND1477 CXB6681 CXB9678 CAA2753 CAC7731 CXB9978 BMZ40P140FTC CNV7619
Mark No. 6 15 17 26 31 35 63 66 71 86
Symbol and Description Cord Assy Panel Tuner Amp Unit Plug(CN351) Holder Holder Unit Detach Grille Assy Knob Button(SELECT) Sub Grille Assy
DEH-P350/XM/UC CDE7129 CNS6935 CWM8593 CKS1238 CND1239 CXB6681 CXB9677 CAA2755 CAC7733 CXB9977 Not used Not used
DEH-P4550/XM/ES Not used CNS6935 CWM8596 Not used CND1477 CXB6681 CXB9680 CAA2755 CAC7733 CXB9980 Not used Not used
90 Screw 91 Holder
Mark No. 6 15 17 26 31 35 63 66 71 86
Symbol and Description Cord Assy Panel Tuner Amp Unit Plug(CN351) Holder Holder Detach Grille Assy Knob Button(SELECT) Sub Grille Assy
DEH-P350/XN/UC CDE7129 CNS6935 CWM8593 CKS1238 CND1239 CNC8659 CXB9677 CAA2755 CAC7733 CXB9977 Not used Not used
Part No. DEH-P3500/XN/UC Not used CNS6934 CWM8594 Not used CND1477 CNC8659 CXB9678 CAA2753 CAC7731 CXB9978 BMZ40P140FTC CNV7619
DEH-P4550/XN/ES Not used CNS6935 CWM8596 Not used CND1477 CNC8659 CXB9680 CAA2755 CAC7733 CXB9980 Not used Not used
90 Screw 91 Holder
14 1 2
DEH-P350/XM/UC
DEH-P350/XM/UC
15 7 8
C
2 1
D
1 2 1 2
1 1
16 1 2
DEH-P350/XM/UC
Screw JFZ20P020FTC Screw JGZ17P022FTC Washer YE15FTC Washer YE20FTC Pickup Unit(Service)(P10) CXX1641 IMS26P030FMC
F
91 Screw
DEH-P350/XM/UC
17 7 8
7 6
CE2
13
ROM_VDD
5
SL
10 9 8
CE1 DI CK
11
NC
14
DO
18 19 20 21
NC NC NC NC
WC
5V
OSC
LPF
ANTENNA
CN401
1 2
1
AM ANT ATT
T51
CF52 CF51
AUDIOGND
OSCGND
VDD_3.3
RFGND
DGND
12
15
22
16
VCC
NC
3.3V
17
D CD CORE UNIT(S10)
CN101
Q101 LD+ MD 14 5 AC, F, E, BD 1 2 LD PD LOUT xtal 20 23 X201
LASER DIODE
HOLOGRAM UNIT FOCUS ACT. MONITOR TRACKING ACT. DIODE FOP TOP 1 4 FOP TOP
IC 201 SO UPD63712GC
LIMIT
SPINDLE MOTOR
ACT,MOTOR DRIVER
16 SOP 15 SOM 17 LCOM 18 LCOP
HOME
VDCONT
CONT
CONT
15
ROT0 ILMPW
dsens
LOEJ
17
SWVDD
22
DPDT
ROT1
IC 301 BA5996FP
DSCSNS CLMP VD VD 6 11 1 2 16 11
3.3V REGULATOR
3R3V 3
IC 701
NJM2391DL1-33
IC 801
4 2
18 1 2
DEH-P350/XM/UC
IC 3 EEPROM 5.0V
IC 5 3.3V
24
23
41 43 44 42
CN101
7 11 5 1 8
BZ 641
BUZZER
EVST,EVCK,EVD
LEVEL INDIC
IP-BUS DRIVER
BUS5 BUS+ 22 28 27 79 PEE TX RX IPPW LVLINL mute 92 85
IC 101 6 HA12187FP 2 RX
8 IPPW
1 TX
CN701
LOUT 8 14
CN651
Q101
BU SYSPW 1
24 7 INTQ
80
IC 652
4 18
ASENBO
Q102
18
SYSTEM CONTROLLER
INTQ
IC 653
12 XSI
TC7SET08FU
16 6
IC 601(2/2) PD5802A
XIN XOUT
13 X601 11
4 23
TC7SET08FU
56 87 CLMP 66 80
LOEJ
BU Q804
32 20
34
39
33
38 35 36 41
VDSENS
20 21
Q651 BU VDD
Q8
Q652
Q8 S DSENS
TC7SET08FU
ILB
A
DEH-P350/XM/UC
CN351 RESET
1
RL
2 VDD
RL Q351
REAR L
IC 602
S-80835ANUP-EDZ
CN352
10 reset
PL Q353
PL
NON-FAD/SW L
ce@ CE1 DO DI CK
69 70 98 99 100
FL Q352
FL
FRONT L
VDD REGULATOR
Q911
95 SL
B
CN901
SYSTEM CONTROLLER
IC 601(1/2) PD5802A
DALMON 67
BACKUP SENSE
bsens 73 Q931 ACC
BU 16 BU 14
FUSE 10A
16 14
BACK UP ACC
asens
72
ACC SENSE
isens 81 VDD TELIN 8 Q951
Q932
ILM SENSE
12
12
TELEPHONE MUTE
TPD1018F
ELECTRONIC VOLUME/ SOURCE SELECTOR
TUN L +L -L 41 43 BU 15 15
C
GND
POWER AMP
IN2-L IN4+L PL 12 10 11 14 12 FLIN RLIN MUTE 22 STBY 4
6,20 FL23 21 3 5 7 5 8 6 11 7 5 8 6 11
44 IN4-L 42 IN3-L
IC 201 PML009A
FL
IC 301 PAL007A
RL SEL_OUT_L 1
EVST,EVCK,EVDT
MUTE
Q982 BU
5
MUTE
Q301
SYS 8.4V
NJM4558MD
Q922
Q981
D
SYSPW
NJM2391DL1-33
CN831
BU Q805 5 6 5 6
8 9 S1970 EJECT 4
B PANEL UNIT
CN1901
9 ILB
C
S1951
KEYBOARD UNIT
ILB ILB
E
3
13 12
9 7
4 6
ROT0 ROT1
ROT0 2 ROT1 1
DIMMER
Q1910
11
SWVDD
ILLUMINATION
IC 1901 RS-140
KEY MATRIX
DPDT KTDT
LCD
08FU
ILB
Q806 10 10 5 8
BL+B
CN1951 CN1950
DEH-P350/XM/UC
19 7 8
A-a
A-a
A-b
A-a
A-b
Guide page
A-a
A-b
Detailed page
UC
ES
D
CN701 CD CORE UNIT(S10)
C
EJECT SW
KEYBOARD UNIT
B PANEL UNIT
20
A B
1 2
DEH-P350/XM/UC
A-b
The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation.
DEH-P350/XM/UC
REAR R CH REAR L CH
B
FRONT R CH FRONT L CH
SYSTEM CONTROLLER
600H
>
ILM B.REM
TEL RL
DSENS
For resistors and capacitors in the circuit diagrams, their resistance values or capacitance values are expressed in codes: Ex. *Resistors Code Practical value 123 12k ohms 103 10k ohms
DEH-P350/XM/UC
A
7 8
21
A-b
A
A-a A-b
A-a
22 1 2
DEH-P350/XM/UC
ES
UC
SYSTEM CO
A-b
A
B PANEL UNIT
EJECT SW
A-a A-b
KEYBOARD UNIT
A-a B
DEH-P350/XM/UC
23 7 8
24
A-a A-b
A-b
The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation.
DEH-P350/XM/UC
REAR R CH REAR L CH
2
FRONT R CH FRONT L CH SUB WOOFER R CH SUB WOOFER L CH
600H
DEH-P350/XM/UC
SYSTEM CONTROLLER
BACKUP
>
GND ACC
ILM
B.REM
DSENS
DEH-P350/XM/UC
For resistors and capacitors in the circuit diagrams, their resistance values or capacitance values are expressed in codes: Ex. *Resistors Code Practical value 123 12k ohms 103 10k ohms
A-a A-b
A-b
E
25
CL-195PG-CD
S1912, 1914 : CSG1112 (DEH-P350/XM/UC, DEH-P350/XN/UC) S1912, 1914 : CSG1160 (DEH-P3500/XM/UC, DEH-P3500/XN/UC, DEH-P4550/XM/ES, DEH-P4550/XN/ES)
C
26 1 2
DEH-P350/XM/UC
KEYBOARD UNIT
A
CL-195PG-CD
CN1951
C
151
CL-195PG-CD 151
C
DEH-P350/XM/UC
27 7 8
Pickup Unit(Service)(P10) #
F T T T T
F T T F F T T F F
F T T
!
C
1
D
MOTOR DRIVER
@
S
S S F
7 8
5
C
C C
6 3
F F T S S T
3.3V REGULATOR
F
D
28 1 2
DEH-P350/XM/UC
F T C S
C S T F
SIGNAL LINE FOCUS SERVO LINE TRACKING SERVO LINE CARRIAGE SERVO LINE SPINDLE SERVO LINE
SWITCHES: CD CORE UNIT S901 : HOME SWITCH.....ON-OFF S902 : CLAMP SWITCH....ON-OFF S903 : DSCSNS SWITCH....ON-OFF S904 : 12EJ SWITCH....ON-OFF S905 : 8EJ SWITCH....ON-OFF The underlined indicates the switch position.
9 4
2 @
S
CN651 CN???
5
C
3 $%
D
DEH-P350/XM/UC
29 7 8
- Waveforms
A
Note : 1. The encircled numbers denote measuring points in the circuit diagram. 2. Reference voltage REFO1(1.65V) 500ms/div 1 DSCSNS 2 CLCONT 3 LOEJ 4 VD 5V/div 5V/div 5V/div 10V/div 500ms/div 5 SIN 6 CIN 7 TIN 1V/div 2s/div 500mV/div 500mV/div
Ref.: GND
Mode: Normal
During "Play"(CD-DA)
C
Ref.: REFO Mode: Normal Ref.: REFO Mode: Normal Ref.: REFO Mode: Normal
@ MDX 5 SIN
D
@ MDX 5 SIN
# RFAGC
500mV/div 0.5s/div
RF eye pattern
8 FIN ! FE
# RFAGC 0 TE 7 TIN
1 Track Jump
Focus Search
30 1 2
DEH-P350/XM/UC
# RFAGC 0 TE 7 TIN
32 Track Jump
500s/div
C
Ref.: REFO Mode: Normal Ref.: REFO Mode: Normal Ref.: REFO Mode: Normal
$ LOUT % ROUT
1V/div 1V/div
200ms/div
D
Analog Audio
DEH-P350/XM/UC
31 7 8
Connector
Capacitor
SIDE A
B
P.C.Board
Chip Part
SIDE B
DSENS
A
32 1 2
DEH-P350/XM/UC
SIDE A
ANTENNA
B
D
5
CN701
FRONT
B
6
CN1950
A
33 7 8
DEH-P350/XM/UC
A
34 1 2
DEH-P350/XM/UC
SIDE B
A
DEH-P350/XM/UC
35 7 8
PANEL UNIT
SIDE A
C CN1901
EJECT
B
D
PANEL UNIT
CN801 CN831
SIDE B
B
36 1 2
DEH-P350/XM/UC
KEYBOARD UNIT
SIDE A
KEYBOARD UNIT
SIDE B
A
[ BAND [ [
B
[
CN1951
AUDIO
EQ-EX
FUNC 6
DISP EQ
C
DEH-P350/XM/UC
37 7 8
D
A
CD CORE UNIT(S10)
SIDE A
M1 SPINDLE MOTOR
A
CN651 CN???
HOME
D
38 1 2
DEH-P350/XM/UC
CD CORE UNIT(S10)
8EJ
SIDE B
A
12EJ
DSCSNS CLAMP
D
DEH-P350/XM/UC
39 7 8
=====Circuit Symbol and No.===Part Name --- ----------------------------------------------D D D D D D D D D D L L L L L L L L L L L X S BZ AR 808 911 912 921 931 932 937 951 981 982 101 201 301 401 403 404 406 601 651 801 951 601 802 641 401 Diode Diode Diode Diode Diode Diode Diode Diode Diode Diode Inductor Ferri-Inductor Choke Coil 600H Ferri-Inductor Inductor Inductor Inductor Ferri-Inductor Inductor Inductor Inductor Radiator 10.00MHz Switch(DSENS) Buzzer Arrester FM/AM Tuner Unit Fuse 10A
Part No. ------------------------HZS11L(A1) S5688G HZS6L(B2) HZS9L(B3) HZS7L(A1) HZS7L(C3) MA110 DAN202U DAN202U HZS9L(A2) LAU2R2K LAU4R7K CTH1280 LAU4R7K LAU1R0K LAU1R0K CTF1385 LAU100K CTF1382 LAU2R2K LAU2R2K CSS1599 CSN1039 CPV1062 DSP-201M CWE1646 CEK1208
A
IC IC IC IC IC
Unit Name
MISCELLANEOUS
101 131 201 301 401 601 602 652 653 101 102 301 351 352 353 651 652 803 804 805 806 807 808 911 913 921 922 923 931 932 951 981 982 131 132 133 134 301 302 303 304 401 402 403 651 803 804 805 806 807 IC IC IC IC IC IC IC IC IC Transistor
IC IC IC IC Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q D D D D D D D D D D D D
Transistor Transistor Transistor(DEH-P350) Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Diode Network Diode Network Diode Diode Diode Diode Diode Diode Diode Diode Diode Diode Diode Network Diode Diode Diode Diode
RESISTORS
R R R R R R R R R R R R R R R R R R R R R R R R R 101 102 103 104 105 106 107 108 109 110 111 112 113 114 133 134 139 140 147 148 201 241 242 247 248 RS1/16S101J RS1/16S620J RS1/16S101J RS1/16S222J RS1/16S103J RS1/16S472J RS1/16S223J RS1/16S472J RS1/16S821J RS1/16S821J RS1/16S223J RS1/16S223J RS1/16S102J RS1/16S102J RS1/16S563J RS1/16S104J RS1/16S563J RS1/16S104J RS1/16S474J RS1/16S474J RAB4C102J RS1/16S0R0J RS1/16S0R0J RS1/16S101J RS1/16S101J
D D D D D
40 1 2
DEH-P350/XM/UC
=====Circuit Symbol and No.===Part Name --- ----------------------------------------------R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R 249 250 301 302 303 304 351 352 353 354 355 356 357 358 359 360 361 362 403 404 405 406 407 408 410 413 416 417 419 421 423 601 602 606 607 615 616 617 618 630 632 641 648 649 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 667 668 670 673 677 682 684 689 802 803 (DEH-P4550) (DEH-P350) (DEH-P3500) (DEH-P350) (DEH-P350)
Part No. ------------------------RS1/16S101J RS1/16S101J RS1/16S103J RS1/16S103J RS1/16S153J RS1/16S331J RS1/16S821J RS1/16S821J RS1/16S821J RS1/16S821J RS1/16S821J RS1/16S821J RS1/16S223J RS1/16S223J RS1/16S223J RS1/16S223J RS1/16S223J RS1/16S223J RS1/16S681J RS1/16S0R0J RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S0R0J RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S681J RD1/4PU0R0J RS1/16S104J RS1/16S104J RS1/16S104J RS1/16S104J RS1/16S822J RS1/16S0R0J RS1/16S473J RS1/16S102J RS1/16S104J RS1/16S104J RS1/16S104J RS1/16S102J RS1/16S221J RS1/16S221J RD1/4PU221J RD1/4PU221J RS1/16S472J RS1/16S222J RS1/16S102J RS1/16S0R0J RS1/16S0R0J RS1/16S102J RS1/16S221J RS1/16S221J RS1/16S221J RS1/16S221J RS1/16S102J RS1/16S221J RD1/4PU0R0J RS1/16S221J RS1/16S222J RS1/16S221J RS1/16S104J RS1/16S104J RS1/16S221J RS1/16S0R0J RS1/16S0R0J RS1/16S222J RS1/16S472J
=====Circuit Symbol and No.===Part Name --- ----------------------------------------------R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 903 912 913 914 915 916 923 924 925 931 932 933 934 935 936 938 939 951 952 953 954 983 984 985
Part No. ------------------------RS1/16S1R0J RS1/16S391J RS1/16S391J RS1/16S473J RS1/16S473J RS1/16S102J RS1/16S222J RS1/16S222J RS1/16S222J RS1/16S222J RS1/16S222J RS1/16S473J RS1/16S104J RD1/4PU391J RS1/16S104J RS1/16S222J RS1/16S222J RS1/16S472J RS1/16S0R0J RS1/16S102J RS1/16S473J RS1/16S102J RS1/16S102J RS1/16S102J RS1/16S102J RS1/16S223J RS1/16S222J RS1/16S223J RS1/16S104J RS1/16S104J RS1/16S104J RS1/16S103J RD1/4PU122J RS1/16S182J RS1/16S472J RS1/16S473J RS1/16S103J RS1/16S473J RS1/16S104J RS1/16S103J RD1/4PU102J RD1/4PU102J RD1/4PU153J RS1/16S472J RS1/16S472J RS1/16S102J RS1/16S223J RS1/16S473J RS1/16S102J
(DEH-P350) (DEH-P350)
CAPACITORS
C C C C C C C C C C C C C C C C C C C C 101 102 131 132 141 142 143 144 145 146 147 201 202 203 204 205 206 207 208 209 CKSRYB104K16 CKSRYB473K25 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB103K50 CKSRYB474K10 CKSRYB474K10 CCSRCH101J50 CCSRCH101J50 CKSRYB104K16 CEJQ1R0M50 CEJQ1R0M50 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CEJQ470M16 CEJQ1R0M50 CEJQ1R0M50 CEJQ1R0M50
DEH-P350/XM/UC
41 7 8
=====Circuit Symbol and No.===Part Name --- ----------------------------------------------C C C C C C C C C C C C C C C C C C C C C C C C C 210 211 212 213 214 215 216 217 218 219 220 221 222 225 301 306 307 309 310 311 312 317 318 319 320 321 322 323 324 325 326 351 352 353 354 355 356 401 402 403 404 406 408 409 411 412 601 602 603 604 605 609 651 652 653 656 657 755 806 807 811 854 911 912 913 914 921 922 923 931 (DEH-P350) (DEH-P350) 3300F/16V
Part No. ------------------------CEJQ1R0M50 CEJQ4R7M35 CEJQ4R7M35 CEJQ4R7M35 CEJQ4R7M35 CEJQ4R7M35 CEJQ4R7M35 CEJQ4R7M35 CEJQ4R7M35 CCSRCH120J50 CCSRCH120J50 CCSRCH120J50 CCSRCH120J50 CEJQ100M16 CKSRYB104K16 CEJQ330M10 CCH1486 CKSRYB104K16 CEJQ100M16 CKSYB475K16 CKSYB475K16 CKSRYB474K10 CKSRYB474K10 CKSRYB474K10 CKSRYB474K10 CKSRYB474K10 CKSRYB474K10 CKSRYB474K10 CKSRYB474K10 CKSQYB225K10 CKSQYB225K10 CEJQ4R7M35 CEJQ4R7M35 CEJQ4R7M35 CEJQ4R7M35 CEJQ4R7M35 CEJQ4R7M35 CKSRYB103K50 CEJQ101M10 CKSQYB105K16 CKSYB475K10 CEJQ470M10 CKSYB475K10 CEJQ1R0M50 CCSRCH101J50 CCSRCH470J50 CEJQ4R7M35 CKSQYB105K16 CEJQ2R2M50 CCSRCH200J50 CCSRCH200J50 CCSRCH101J50 CEJQ101M10 CKSRYB473K25 CKSRYB473K25 CKSRYB473K25 CCSRCH470J50 CKSRYB104K16 CKSRYB473K25 CKSRYB473K25 CKSQYB105K16 CKSRYB473K25 CCH1331 CKSRYB472K50 CKSRYB103K50 CEJQ470M10 CEJQ221M10 CKSRYB103K50 CEJQ101M16 CEJQ1R0M50
C
IC IC Q D D D D D D D D D D D D X S S S S S S S S S S S S S S S S S S S S S
MISCELLANEOUS
1900 1901 1910 1902 1910 1912 1914 1930 1931 1932 1935 1942 1943 1946 1947 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1912 1913 1914 1914 1915 1916 1917 1918 1950
C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C
RESISTORS
R R R R R R R R R R R R R R R R R R R R R 1900 1901 1902 1903 1910 1912 1914 1915 1919 1930 1932 1934 1936 1938 1939 1940 1941 1942 1943 1950 1960 RS1/16S222J RS1/16S222J RS1/16S121J RS1/16S2R2J RS1/16S101J RS1/16S680J RS1/16S181J RS1/16S181J RS1/16S101J RS1/16S560J RS1/16S560J RS1/16S560J RS1/16S560J RS1/16S151J RS1/16S151J RS1/16S560J RS1/16S151J RS1/16S0R0J RS1/16S151J RS1/16S472J RS1/16S473J
470F/16V
C C C C C
42 1 2
DEH-P350/XM/UC
=====Circuit Symbol and No.===Part Name --- ----------------------------------------------R R R R R R R R R R R R R R R 304 305 306 307 308 501 503 505 506 507 508 509 601 602 603 901 902 903
Part No. ------------------------RS1/16S822J RS1/16S183J RS1/16S183J RS1/16S183J RS1/16S183J RS1/16S102J RS1/16S102J RS1/16S102J RS1/16S221J RS1/16S221J RS1/16S221J RS1/16S221J RS1/16S101J RS1/16S101J RS1/16S0R0J RS1/16S104J RS1/16S473J RS1/16S273J
CAPACITORS
C C C C C C C C 1900 1901 1902 1903 1904 1910 1911 1913 CKSRYB104K16 CKSYF106Z10 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYF104Z25 CKSRYF104Z25 CKSRYF104Z25
B
D S
MISCELLANEOUS
1970 1970
RESISTORS
R R R 1970 1971 1972 RS1/16S101J RS1/16S101J RS1/16S0R0J
R R R
CAPACITORS
C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C 101 102 103 104 106 108 109 201 202 203 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 231 232 301 302 303 304 305 306 501 502 702 703 704 705 100F/16V 10F/6.3V 22F/6.3V 100F/6.3V CKSRYB104K16 CKSRYB104K16 CCH1504 CCH1506 CCSRCH101J50 CKSRYB224K16 CKSRYB224K16 CKSRYB104K16 CKSRYB471K50 CKSRYB104K16 CCH1507 CKSRYB103K25 CKSRYB104K16 CCH1505 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB332K50 CKSRYB473K25 CKSRYB104K16 CKSRYB103K25 CCSRCH560J50 CCSRCH5R0C50 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB103K25 CCSRCH680J50 CCSRCH470J50 CKSRYB682K50 CKSRYB102K50 CKSRYB102K50 CCH1504 CCSRCH221J50 CCSRCH221J50 CKSRYB472K50 CKSRYB103K25 CKSRYB104K16 CKSRYB103K25 CKSRYB103K25 CCH1504 CKSRYB224K16 CKSRYB104K16 CCH1470
CAPACITORS
C 1970 CKSRYB104K16
100F/16V 47F/6.3V
D
IC IC IC Q D D X S S S S S
MISCELLANEOUS
RESISTORS
R R R R R R R R R R R R R R R R R R R R R R R R R 101 102 103 104 105 201 202 203 204 205 206 207 208 209 214 215 216 217 218 234 235 236 301 302 303 RS1/10S1R5J RS1/10S1R5J RS1/10S1R5J RS1/10S1R5J RS1/10S1R5J RS1/16S102J RS1/16S1002D RS1/16S1002D RS1/16S1002D RS1/16S1002D RS1/16S1002D RS1/16S1002D RS1/16S1002D RS1/16S1002D RS1/16S103J RS1/16S393J RS1/16S122J RS1/16S562J RS1/16S472J RS1/16S0R0J RS1/16S103J RS1/16S103J RS1/16S183J RS1/16S822J RS1/16S183J
100F/16V
DEH-P350/XM/UC
43 7 8
6. ADJUSTMENT
6.1 CD ADJUSTMENT
A
1) Cautions on adjustments In this product the single voltage (3.3V) is used for the regulator. The reference voltage is the REFO1 (1.65V) instead of the GND. If you should mistakenly short the REFO1 with the GND during adjustment, accurate voltage will not be obtained, and the servos misoperation will apply excessive shock to the pickup. To avoid such problems: a. Do not mix up the REFO1 with the GND when connecting the (-) probe of measuring instruments. Especially on an oscilloscope, avoid connecting the (-) probe for CH1 to the GND. b. In many cases, measuring instruments have the same potential as that for the (-) probe. Be sure to set the measuring instruments to the floating state. c. If you have mistakenly connected the REFO1 to the GND, turn off the regulator or the power immediately. Before mounting and removing filters or leads for adjustment, be sure to turn off the regulator. For stable circuit operation, keep the mechanism operating for about one minute or more after the regulator is turned on. In the test mode, any software protections will not work. Avoid applying any mechanical or electrical shock to the mechanism during adjustment. The RFI and RFO signals with a wide frequency range are easy to oscillate. When observing the signals, insert a resistor of 1k ohms in series. The load and eject operation is not guarantied with the mechanism upside down. If the mechanism is blocked due to mistaken eject operation, reset the product or turn off and on the ACC to restore it.
2) Test mode This mode is used to adjust the CD mechanism module. To enter the test mode. While pressing the 4 and 6 keys at the same time, reset. To exit from the test mode. Turn off the ACC and back up. Notes: a. During ejection, do not press any other keys than the EJECT key until the loaded disc is ejected. b. If you have pressed the () key or () key during focus search, turn off the power immediately to protect the actuator from damage caused by the lens stuck. c. For the TR jump modes except 100TR, the track jump operation will continue even if the key is released. d. For the CRG move and 100TR jump modes, the tracking loop will be closed at the same time when the key is released. e. When the power is turned off and on, the jump mode is reset to the single TR (91), the RF amp gain is set to 0dB, and the auto-adjustment values are reset to the default settings.
44 1 2
DEH-P350/XM/UC
- Flow Chart
[KEY] Contents Display [4]+[6]+Reset Test Mode In
[CD]or[SOURCE] Source On
TRK MIN
[BAND] Power On
(T.Offset is adjusted)
TRK 00 MIN00 SEC 00
[3] Power On
(T.Offset is not adjusted)
TRK 99 MIN 99 SEC 99
[] CRG+
TRK *8
[] CRGTRK *8
[2]
Automatic adjustment display switching
TRK *3
91 MIN91 SEC 91
or
TRK
or
TRK
or
TRK
?? MIN?? SEC ??
[1]
T.Close and F,T AGC and RF AGC
Applicable servomechanism TRK xx MINxx SEC xx
[3] RF AGC /
RF AGC coefficient display
TRK ?? MIN ?? SEC ??
[] CRG+
TRK8x MIN8x SEC8x
[2]
T.Balance adjustment
T.Balance coefficient display
TRK ?? MIN?? SEC ??
or
or
[6]
CRG/TR Jump value switching
TRK *5
[]
*4
[]
*4
CRG/TR Jump +
TRK
?? MIN?? SEC ??
xx MINxx SEC xx
xxMIN xxSEC xx
xxMIN xxSEC xx
xxMIN xxSEC xx
*6
or
TRK
or
*1)
TRK
TYP
MIN SEC
-12dB
TRK 12 MIN 12 SEC 12
[Key]
S.Curve
F EQ measurement setting
TRK 02 MIN 02 SEC 02
[BAND] Power On / Off [] CRG + / TR Jump + (Direction of the external surface) CRG - / TR Jump (Direction of the internal surface) CLS and AGC and Applicable servomechanism / AGC, AGC display switching RF Gain switching / Offset adjustment display / T.Balance adjustment / T.Open Close, S.Curve / Rough Servo and RF AGC / F, T, RF AGC SPDL 1X / 2X switching (Double-speed compatibility only) Gop measurement Forcus Mode switching / Tracking Close / CRG, TR Jump switching
TRK 00 MIN 00 SEC 00 TRK 01 MIN 01 SEC 01 (TRK 99 MIN 99 SEC 99)
*3) F.Offset Display RF.Offset Display T.Offset Display [] *4) 1TR/32TR/100TR *5) Single TR 32TR 100TR CRG Move 9x(8x) : 91(81) 92(82) 93(83) 94(84) [1] [2] [3] [6]
*6) Only at the time of CRG Move or 100TR Jump *7) TRK/MIN/SEC F.AGC T.AGC Gain F.bias RF AGC *8) CRG motor voltage = 2[V]
DEH-P350/XM/UC
45 7 8
Note : The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the PU unit must be changed, the grating should be checked using the procedure below. Purpose : To check that the grating is within an acceptable range when the PU unit is changed. Symptoms of Mal-adjustment : If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform track search operations, or taking a long time for track searching. Method : Measuring Equipment Measuring Points Disc Mode
CD CORE UNIT(S10)
C
E VREF
Oscilloscope
F VREF REFO1
Checking Procedure 1. In test mode, load the disc and switch the 3V regulator on. 2. Using the and buttons, move the PU unit to the innermost track. 3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance adjustment the display should now read "81". Press key 3. The display will change, returning to "81" on the fourth press. 4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase difference is within 75 . Refer to the photographs supplied to determine the phase angle. 5. If the phase difference is determined to be greater than 75 try changing the PU unit to see if there is any improvement. If, after trying this a number of times, the grating angle does not become less than 75 then the mechanism should be judged to be at fault. Note Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the average angle. Hint Reloading the disc changes the clamp position and may decrease the "wobble".
46 1 2
F E
DEH-P350/XM/UC
Grating waveform
45
60
75
90
DEH-P350/XM/UC
47 7 8
If a CD is not operative or stopped during operation due to an error, the error mode is turned on and cause(s) of the error is indicated with a corresponding number. This arrangement is intended at reducing nonsense calls from the users and also for facilitating trouble analysis and repair work in servicing.
(1) Basic Indication Method 1) When SERRORM is selected for the CSMOD (CD mode area for the system), error codes are written to DMIN (minutes display area) and DSEC (seconds display area). The same data is written to DMIN and DSEC. DTNO remains in blank as before.
2) Head unit display examples Depending on display capability of LCD used, display will vary as shown below. xx contains the error number. 8-digit display ERRORxx 6-digit display ERRxx 4-digit display Exx
(2) Error Code List Displayed error code Description of the code and potential cause(s) Code Class Electricity Carriage Home NG CRG can't be moved to inner diameter. 10 CRG can't be moved from inner diameter. SERVO LSI ComC
Failure on home switch or CRG move mechanism. Communication error between microcomputer and SERVO LSI. Focusing not available. Stains on rear side of disc or excessive vibrations on REWRITABLE. Spindle not locked. Sub-code is strange (not readable). Failure on spindle, stains or damages on disc, or excessive vibrations. A disc not containing CD-R data is found. Turned over disc are found, though rarely. CD signal error. AGC protection doesn't work. Focus can be easily lost. Damages or stains on disc, or excessive vibrations on REWRITABLE. Failed to reach target address. CRG tracking error or damages on disc. Skip setting for all track. (CD-R/RW) Mechanical error during CD ON. Defective loading motor, mechanical lock and mechanical sensor. Power (VD) is ground faulted. Failure on SW transistor or power supply (failure on connector).
17 30 44 50 A0
System
Power Supply NG
Remarks: Mechanical errors are not displayed (because a CD is turned off in these errors). Unreadable TOC does not constitute an error. An intended operation continues in this case. Upper digits of an error code are subdivided as shown below: 1x: Setup relevant errors, 3x: Search relevant errors, Ax: Other errors.
48 1 2
DEH-P350/XM/UC
7. GENERAL INFORMATION
7.1 DIAGNOSIS 7.1.1 DISASSEMBLY
- Removing the Case (not shown) 1. Remove the Case.
A
CD Mechanism Module
1 1
Remove the two screws and then remove the Grille Assy.
1
C
Grille Assy
Fig.1 - Removing the Tuner Amp Unit (Fig.2)
1 2 3 4
2 2
Straight the tabs at three locations indicated. Remove the screw and then remove the Tuner Amp Unit.
4 1
E
49 7 8
Do not squeeze.
A C A
Upper Frame
A
A Damper B Damper
Washer Pickup Lock Arm Styling Holder Feed Screw Change Arm
50 1 2
SW F
1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16
8 9 10 11 5 6 7 1 2 3 4
10A
DEH-P350/XM/UC
ANTENNA JACK
FRONT OUTPUT
7 D E
9. TEL MUTE 10. NC 11. B.REM 12. ILM 13. NC 14. ACC 15. GND 16. BACK UP
1. BUS+ 2. GND 3. GND 4. NC 5. BUS6. GND 7. BUS L+ INPUT 8. ASENB 9. BUS R+ INPUT 10. BUS R- INPUT 11. BUS L- INPUT
8 B A C
51
- Pin Functions(PD5802A)
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15-17 18 19 20 21 22 23 24-26 27 28 29-31 32 33 34 35, 36 37 38 39 40 41 42 43-55 56 57 58 59 60 61 62 63-65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81
52 1 2
Pin Name SYSPW DORAON XSO XSI XSCK BYTE CNVSS TELIN NC RESET XOUT VSS XIN VCC NC INTQ RX2 LCDPW CLCONT PEE CDLOEJ NC RX TX NC VDCONT DPDT KYDT ROT1, 0 PCL SWVDD dsens FLPILM ILMPW EJTIN NC CONT EMUTE xstb XA0 VCC xrst VSS NC xtalen DALMON NC tunpce@ TUNPCE romcs asens bsens ROMCK ROMDATA VST VDT VCK IPPW ASENBO isens
I/O O O O I O I I I I O I I I
I O O O O I O O O I I O O I O O I O O O O I O I O O O O O I I O I/O O O O O O I
Function and Operation System power control output Tuner unit power supply output S10 : Serial data output S10 : Serial data input S10 : Clock output for serial communication External data bus width change input Processor mode change input TEL : Cellular mute input Not used Reset input Clock output GND Clock input Power supply input Not used CD-TEXT PACK interruption IPBUS : Input 2 Back light power supply output S10 : Driver control change output PEE sound output S10 : Road/eject output Not used IPBUS : Input IPBUS : Output Not used S10 : VD power supply control output GRILL : Data output GRILL : Data input Rotary encoder pulse input1, 0 Output for clock adjustment GRILL : Chip enable output Detach sense input Illumination output inside flap Illumination output Eject key input Not used S10 : Servo driver control output EVOL : Mute output S10 : Data strobe signal output S10 : Command/parameter discernment signal output Power supply input S10 : Reset signal output GND Not used S10 : Ceramic resonator oscillation control For consumption current reduction Not used TUNER : Chip enable output(EEPROM) TUNER : Chip enable output(PLL) ROM correction : Chip select ACC sense Back up sense ROM correction : Clock output ROM correction : Data input/output EVOL : Strobe output EVOL : Data output EVOL : Clock output IPBUS : Driver power supply control output IPBUS : Slave ACC sense output Illumination sense input
DEH-P350/XM/UC
Pin Name NC MUTE TESTIN DSCSNS VDSENS TEMP LVLINR csens LVLINL MODEL0 AVSS SL VREF AVCC TUNPDI TUNPDO TUNPCK
I/O O I I I I I I I I I I I O O
Format Function and Operation Not used MUTE output Test program input S10 : Disc position detection input S10 : VD power supply short input S10 : Temperature sense input Level indicator R.ch input Flap opening-and-closing sense input Level indicator L.ch input Model 0 GND TUNER : Signal level input AD translation reference voltage AD translation power supply input terminal TUNER : PLL communication TUNER : Data output(PLL) TUNER : Clock output(PLL)
* PD5802A IC's marked by * are MOS type. Be careful in handling them because they are very liable to be damaged by electrostatic induction.
50
26 25
51
75 100 76
DEH-P350/XM/UC
53 7 8
NJM2391DL1-33
+-
VREF
B
Thermal Shutdown
1
IN
C
2
GND
3
OUT
* S-80835ANUP-EDZ
D
VREF
1 OUT
2 VDD
3 VSS
DEH-P350/XM/UC
54 1 2
I O O I I
I O O O I
*PD6294A 80 1 61 60
20 21 40
41
DEH-P350/XM/UC
55 7 8
- Pin Functions(UPD63712GC)
A
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
56 1
Pin Name LD PD PN AVDD DGND RFOK INTQ rst A0 stb sck SO SI DVDD DAVDD ROUT DAGND REGC DAGND LOUT DAVDD XVDD xtal XTAL XGND DVDD C1D1 C1D2 C2D1 C2D2 C2D3 LOCK MIRR HOLD PLCK C16M DGND TX EMPH FLAG DVDD LIMIT xtalen DGND DIN DOUT SCKIN SCKO LRCKIN LRCK DVDD FD+ FDTD+ TDSD+ SDMD+ MDDGND
I/O O I I
O O I I I I O I
O I
O O O O O O O O O O O O O I I I O I O I O O O O O O O O O
Function and Operation Output of LD Input of PD Assignment of pickup polarity Power supply for the analog system Ground for digital circuits Output of RFOK Interruption signals to the external microcomputer Input of reset Command/Parameter discrimination signal input Data strobe signal input Serial data clock input Serial data output Serial data input Power supply for digital circuits Power supply for DAC Output of audio for the right channel GND for DAC Connected to the capacitor for band gap GND for DAC Output of audio for the left channel Power supply for DAC Power supply for the crystal oscillator Connected to the crystal oscillator Connected to the crystal oscillator Ground for the crystal oscillator Power supply for digital circuits Information on error correction Information on error correction Information on error correction Information on error correction Information on error correction Output of LOCK MIRR signal HOLD signal Output of PLCK Output of 16.9344MHz Ground for digital circuits DAI output Pre-emphasis information output The flag for which output sound data cannot be corrected is outputted Power supply for digital circuits Signal is inputted when the register can be read Permission to oscillate Ground for digital circuits Input of audio data Output of audio data Clock input for audio data Clock output for audio data Input of LRCK for audio data Output LRCK for audio data Power supply for digital circuits Output of focus drive PWM Output of focus drive PWM Output of tracking drive PWM Output of tracking drive PWM Output of thread drive PWM Output of thread drive PWM Output of spindle drive PWM Output of spindle drive PWM Ground for digital circuits
DEH-P350/XM/UC
Pin Name TESTEN TEST4-0 ADGND EFM ASY ADVDD RFI EQ2, 1 RFRF2AGCO AGCI RFO ATEST C3T AGND A C B D F E VREFIN AVDD REFOUT REFC FEFEO ADCIN TETEO TE2 TEC AGND PWMSW
I/O I I O I I I I O I O O
I I I I I I I O I O I I O O I I
Function and Operation Connected to GND Connected to GND GND for DAC Output of EFM signals Input of asymmetry Power supply for DAC Input of RF Equalizer 2, 1 Reversal input of RF Reversal input of RF2 Output of RF Input of AGC Output of RF Analog tests Connection to the capacitor for detecting 3T Ground for the analog system Input of A Input of C Input of B Input of D Input of F Input of E Photo-detector input bias voltage Power supply for the analog system Output of reference voltage Connected to the capacitor for output of REFOUT Reversal input of FE Output of FE TEST Reversal input of TE Output of TE TE2 TEC Ground for the analog system Servo PWM mode switching
* UPD63712GC
50
26 25
E
51
75 100 76
DEH-P350/XM/UC
57 7 8
- Pin Functions(BA5996FP)
A
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
Pin Name VR OPIN2(+) OPIN2(-) OPOUT2 OPIN1(+) OPIN1(-) OPOUT1 GND MUTE POWVCC1 VO1(-) VO1(+) VO2(-) VO2(+) VO3(+) VO3(-) VO4(+) VO4(-) POWVCC2 GND CNT LDIN OPOUTSL OPINLSL OPOUT3 OPIN3(-) OPIN3(+) PREVCC
Function and Operation Input pin for reference voltage Input pin for non-inverting input for CH2 preamplifier Input pin for inverting input for CH2 preamplifier Output pin for CH2 preamplifier Input pin for non-inverting input for CH1 preamplifier Input pin for inverting input from CH1 preamplifier Output pin for CH1 preamplifier Ground pin Mute control pin Power supply pin for CH1, CH2, and CH3 at "Power" stage Driver CH1 - Negative output Driver CH2 - Positive output Driver CH2 - Negative output Driver CH2 - Positive output Driver CH2 - Positive output Driver CH2 - Negative output Driver CH4 - Positive output Driver CH4 - Negative output Power supply pin for CH4 at "Power" stage Ground pin Control pin Loading input Output pin for preamplifier for thread Input pin for preamplifier for thread CH3 preamplifier output pin Input pin for inverting input for CH3 preamplifier Input pin for non-inverting input for CH3 preamplifier PreVcc
BA5996FP
D
14
15
28
58 1 2
DEH-P350/XM/UC
13
ROM_VDD
5
SL
10 9 8
DI CE1 CK
11
NC
14
DO
18 19 20 21
NC NC NC NC
5V
OSC
LPF
AM ANT 1 ATT
T51
CF52 CF51
AUDIOGND
OSCGND
VDD_3.3
RFGND
DGND
3.3V
VCC
NC
12
15
22
16
17
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
I O I I I I I
RF ground FM antenna input power supply signal level chip enable-2 write control chip enable-1 clock data in non connection osc ground power supply data out digital ground non connection power supply non connection non connection non connection non connection audio ground L channel output R channel output
AM antenna input high impedance AMANT pin is connected with an all antenna by way of 4.7H. (LAU type inductor) A series circuit including an inductor and a resistor is connected with RF ground for the countermeasure against the ham of power transmission line. Ground of antenna block Input of FM antenna 75 Surge absorber(DSP-201M-S00B) is necessary. The power supply for analog block. D.C 8.4V 0.3V Output of FM/AM signals level Chip enable for EEPROM Low active You can write EEPROM, when EEPROM write control is Low. Ordinary non connection Chip enable for AFRF High active Clock Data input Not used Ground of oscillator block Power supply for EEPROM pin 13 is connected with a power supply of micro computer. Data output Ground of digital block Not used The power supply for digital block. 3.3V 0.2V Not used Not used Not used Not used Ground of audio block FM stereo L-ch signal output or AM audio output FM stereo R-ch signal output or AM audio output
DEH-P350/XM/UC
IC 3 EEPROM 5.0V
IC 5 3.3V
24
B
23
59 7 8
SEG49 SEG48 SEG47 SEG46 SEG45 SEG44 SEG43 SEG42 SEG41 SEG40 SEG39 SEG38 SEG37 SEG36 SEG35 SEG34 SEG33 SEG32 SEG31 SEG30 SEG29 SEG28 SEG27 SEG26 SEG25 SEG24 SEG23 SEG22 SEG21 SEG20 SEG19 SEG18 SEG17 SEG16 SEG15 SEG14 SEG13 SEG12 SEG11 SEG10 SEG9 SEG8 SEG7 SEG6 SEG5 SEG4 SEG3 SEG2 SEG1 SEG0 COM3 COM2B COM1B COM0B COM2A COM1A COM0A
- LCD(CAW1755)
7.2.2 DISPLAY
COMMON
SEGMENT
60 1 2
2
DEH-P350/XM/UC
3 3
4 4
VCC=5V Pin 14
csens Pin 91 2V < CSENS < 3V Starts communication with Grille microcomputer. 300ms SWVDDH Pin 38
- CSENS < 2V, 3V < CSENS = = Last source returns. CD loading functions are available. Keys except for EJECT key are not available.
D
300ms In case of the above signal, the communication with Grille microcomputer may fail. If the time interval is not 300msec, the oscillator may be defective.
Source ON
SYSPWH Pin 1
DEH-P350/XM/UC
61 7 8
7.4 CLEANING
Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools: Portions to be cleaned CD pickup lenses Cleaning tools Cleaning liquid : GEM1004 Cleaning paper : GED-008
62 1 2
DEH-P350/XM/UC
8. OPERATIONS
A
DEH-P350/XM/UC
63 7 8
64 1 2
DEH-P350/XM/UC
DEH-P350/XM/UC
65 7 8
66 Holder
If you do not operate the Detaching and Replacing the Front Panel Function, use the supplied fixing screws and fix the front panel to this unit.
Holder
CND1249(UC) CXX1644(ES)
DEH-P350/XM/UC
CXX1646(ES)
Power amp (sold separately) Connecting cords with RCA pin plugs (sold separately) Rear output Front output Power amp (sold separately) 16 cm (6-1/4 in.) Power amp (sold separately)
This product
- DEH-P350/XM/UC, DEH-P350/XN/UC
5
IP-BUS input (Blue) Fuse IP-BUS cable Blue/white To system control terminal of the power amp or Auto-antenna relay control terminal (max. 300 mA 12 V DC). System remote control Multi-CD player (sold separately) Antenna jack + Front speaker + Front speaker + Front speaker Left + Rear speaker Green/black + Rear speaker + Subwoofer + Subwoofer Violet/black White/black Green Gray/black Violet Right + Rear speaker White Gray + Front speaker + Rear speaker
6 D C E
Yellow/black If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections.
DEH-P350/XM/UC
Yellow To terminal always supplied with power regardless of ignition switch position.
With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers.
8 B A
67
68
Connecting cords with RCA pin plugs (sold separately) Power amp (sold separately) Front output Power amp (sold separately) IP-BUS input (Blue) Fuse IP-BUS cable Multi-CD player (sold separately) Blue/white To system control terminal of the power amp or Auto-antenna relay control terminal (max. 300 mA 12 V DC). System remote control + Front speaker + Front speaker + Front speaker Left + Rear speaker Green/black Violet/black White/black Green Gray/black Violet Right + Rear speaker White Gray + Front speaker + Subwoofer + Subwoofer
- DEH-P3500/XM/UC, DEH-P3500/XN/UC
This product
Antenna jack
DEH-P350/XM/UC
Yellow/black If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections.
Yellow To terminal always supplied with power regardless of ignition switch position.
With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers.
15. Connecting cords with RCA pin plugs (sold separately) 16. Power amp (sold separately) 2. Front output 16. Power amp (sold separately)
1. This product
- DEH-P4550/XM/ES, DEH-P4550/XN/ES
5
5. Fuse 7. IP-BUS cable 14. Blue/white To system control terminal of the power amp or Auto-antenna relay control terminal (max. 300 mA 12 V DC). 17. System remote control 8. Multi-CD player (sold separately) + 18. Front speaker + 18. Front speaker + 18. Front speaker 23. Left + 25. Rear speaker 27. Green/black 29. Violet/black 26. Green 28. Violet + 25. Rear speaker 20. White/black 22. Gray/black 24. Right 19. White 21. Gray + 18. Front speaker + 30. Subwoofer + 30. Subwoofer
4. Antenna jack
6 D C E
9. Yellow/black If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections.
10. Yellow To terminal always supplied with power regardless of ignition switch position.
DEH-P350/XM/UC
11. Red To electric terminal controlled by ignition switch (12 V DC) ON/OFF.
31. With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers.
8 B A
69