Sie sind auf Seite 1von 21

STEP 1 (Midpoint of the segment)

C O N T R U C T A S L I D E R R

1. Click straightedge tool to construct a segment 2. Select the segment 3. Click construct menu and select mid point

11

STEP 2 (Point on segment)

1. Select the segment once again. 2. Click construct menu and select point on segment

12

STEP 3 (Ratio)

1. Select the point according to this sequence (Point A to point B to point C) 2. Click measure menu and select ratio

13

STEP 4 (Ratio ranging -10 to 10)

1. Click measure menu and select calculate. 2. Click the ratio (in pink box) the value automatically key in. 3. Times the ratio with 10 and click ok

14

STEP 5 (Changes the label)

1. 2. 3. 4.

Click the ratio that times by 10 just now (in pink box) Right click the ratio and click properties In label type A (name of your parameter) Follow step 1-5 and construct the other parameter of B C and D.

15

STEP 6 (Plot the function)

1. Click graph menu and select plot new function 2. Click the value of A B C and D 3. Key in the data according to the function given

16

THE RESULT (Polynomial Graph)

17

STEP 1 (Construct point P and Q)

C O N T R U C T A S E C A N T

1. Click point tools and put the two points at any place along on the graph function. 2. Select the two points and click construct menu and select line. 3. Label the two points as P and Q

L I N E

18

STEP 2 (Slope of secant line PQ)

1. Click the secant line PQ 2. Click measure menu and select slope

19

STEP 1 (Construct tangent at point P)

D E F I N E T A N G E N T A T P O I N T P

1. Click point Q 2. Drag point Q to point P

20

THE RESULT (The tangent of a curve at point P)

T R A C E P O I N T S

When point Q approaching point P we can get the tangent at point P

21

STEP 1 (Plot points S)

1. Click point P 2. Click measure menu and select abscissa (x) to get the value of xcoordinate of P

22

1. Click (x) coordinate of P just now and the slope of PQ 2. Click graph menu and select Plot As (x, y)

23

THE RESULT (The Point S)

24

STEP 2 (Trace point S)

1. Derive the function 2. Click graph menu and select derivative 3. Plot the function

25

1. Select point S 2. Click display menu and select trace plotted point

26

1. Click point PQ and animate points

27

THE RESULT (Trace of S from the graph)

When point Q approaching point P where tangent at point P the point S will be gradually on the derivative function obtained from plotting the graph of.

28

STEP 1 (Derive the function)

M A X I M U M A N D M I N I M U M P O I N T S

1. Select the function graph 2. Click graph menu and select derivative.

29

THE RESULT (Graph f and f)

30

( ) ( ) ( )

Slope +ve
( ) () ( ) ( ) ( ) ( ) ( ) ( )

Slope ve

( ) ( )

( )

( )

( ) ( )

( )

( )

Maximum

Minimum

31

Das könnte Ihnen auch gefallen