Beruflich Dokumente
Kultur Dokumente
LC-42D62U/LC-62C42U
SERVICE MANUAL
No. S86V9LC42D62U
MODELS
LC-42D62U LC-62C42U
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.
OUTLINE
This model is based on the LC-46D62U and is changed some parts. This Service Manual covers the modifications alone. For the other points, refer to the LC-46/52D62U Service Manual.
CONTENTS
DIFFERENCES FROM BASE MODEL LIST OF CHANGED PARTS ..............................i . SAFETY PRECAUTION IMPORTANT SERVICE SAFETY PRECAUTION ..........................................................ii . PRECAUTIONS A PRENDRE LORS DE LA REPARATION ............................................. iii . PRECAUTIONS FOR USING LEAD-FREE SOLDER ..........................................................iv . CHAPTER 1. SPECIFICATIONS [1] SPECIFICATIONS ........................................ 1-1 . CHAPTER 2. OPERATION MANUAL [1] OPERATION MANUAL ................................. 2-1 . CHAPTER 3. DIMENSIONS [1] DIMENSIONS ............................................... 3-1 . CHAPTER 4. REMOVING OF MAJOR PARTS [1] REMOVING OF MAJOR PARTS .................. 4-1 . Parts Guide
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
This document has been published to be used for after sales service only. The contents are subject to change without notice.
LC-42D62U/LC-62C42U
LC-42D62U/LC-62C42U
Service Manual
LC-42D62U/LC-62C42U DUNTKD934FM03 (LC-42D62U) DUNTKD934FM04 (LC-62C42U) DUNTKD935FM03 (LC-42D62U) DUNTKD935FM04 (LC-62C42U) RDENCA192WJQZ
Note Some parts changed Some parts changed No parts changed No parts changed
TERMINAL Unit R/C, LED Unit KEY Unit POWER SUPPLY Unit LCD PANEL 42" WIDE LCD Panel Module Unit MAIN Unit R2015 R2022 R2025 R2026 R2078 R2079
R1LK420D3LF21
Resistor, 4.7k 1/16W Metal Oxide Resistor, 4.7k 1/16W Metal Oxide Resistor, 1k 1/16W Metal Oxide Resistor, 1k 1/16W Metal Oxide Resistor, 10k 1/16W Metal Oxide Resistor, 10k 1/16W Metal Oxide
CABINET AND MECHANICAL PARTS Please refer to a Parts list. PACKING PARTS AND ACCESSORIES Please refer to a Parts list.
LC-42D62U/LC-62C42U
LC-42D62U/LC-62C42U
SAFETY PRECAUTION
IMPORTANT SERVICE SAFETY PRECAUTION
Service Manual
Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow:
WARNING
1. For continued safety, no modification of any circuit should be attempted. 2. Disconnect AC power before servicing.
Use an AC voltmeter having with 5000 ohm per volt, or higher, sensitivity or measure the AC voltage drop across the resistor. Connect the resistor connection to all exposed metal parts having a return to the chassis (antenna, metal cabinet, screw heads, knobs and control shafts, escutcheon, etc.) and measure the AC voltage drop across the resistor. All checks must be repeated with the AC cord plug connection reversed. (If necessary, a nonpolarized adaptor plug must be used only for the purpose of completing these checks.) Any reading of 0.75 Vrms (this corresponds to 0.5 mA rms AC.) or more is excessive and indicates a potential shock hazard which must be corrected before returning the monitor to the owner.
C A U T I O N : F O R C O N T I N U E D PROTECTION AGAINST A RISK OF FIRE REPLACE ONLY WITH SAME TYPE FUSE. F701 (125V, 8A) F4702/F4704/F5702 (125V, 7A) F4701/F4703/F5701 (250V, 3A, 115 C)
O
DVM AC SCALE
1.5k ohm 10W
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
SAFETY NOTICE
Many electrical and mechanical parts in LCD color television have special safety-related characteristics. These characteristics are often not evident from visual inspection, nor can protection afforded by them be necessarily increased by using replacement components rated for higher voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in this manual; electrical components having such features are identified by " " and shaded areas in the Replacement Parts List and Schematic Diagrams. /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// For continued protection, replacement parts must be identical to those used in the original circuit. The use of a substitute replacement parts which do not have the same safety characteristics as the factory recommended replacement parts shown in this service manual, may create shock, fire or other hazards.
ii
AVERTISSEMENT
1. N'entreprendre aucune modification de tout circuit. C'est dangereux. 2. Dbrancher le rcepteur avant toute rparation.
A l'aide de deux fils pinces, brancher une rsistance de 1.5 k 10 watts en parallle avec un condensateur de 0.15F en srie avec toutes les pices mtalliques exposes du coffret et une terre connue comme une conduite lectrique ou une prise de terre branche la terre. Utiliser un voltmtre CA d'une sensibilit d'au moins 5000/V pour mesurer la chute de tension en travers de la rsistance. Toucher avec la sonde d'essai les pices mtalliques exposes qui prsentent une voie de retour au chssis (antenne, coffret mtallique, tte des vis, arbres de commande et des boutons, cusson, etc.) et mesurer la chute de tension CA en-travers de la rsistance. Toutes les vrifications doivent tre refaites aprs avoir invers la fiche du cordon d'alimentation. (Si ncessaire, une prise d'adpatation non polarise peut tre utilise dans le but de terminer ces vrifications.) La tension de pointe mesure ne doit pas dpasser 0.75V (correspondante au courant CA de pointe de 0.5mA). Dans le cas contraire, il y a une possibilit de choc lectrique qui doit tre supprime avant de rendre le rcepteur au client.
PRECAUTION: POUR LA PROTECTION CONTINUE CONTRE LES RISQUES D'INCENDIE, REMPLACER LE FUSIBLE
F701 (125V, 8A) F4702/F4704/F5702 (125V, 7A) F4701/F4703/F5701 (250V, 3A, 115 C)
O
DVM ECHELLE CA
1.5k ohm 10W
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
iii
Soldering
As the melting point of lead-free solder (Sn-Ag-Cu) is about 220 C which is higher than the conventional lead solder by 40 C, and as it has poor solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended period of time. However, Since the land may be peeled off or the maximum heat-resistance temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the steady soldering condition. Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn on and off the power of the bit as required. If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use of it. When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper. Be careful when replacing parts with polarity indication on the PWB silk.
Lead-free wire solder for servicing PARTS CODE ZHNDAi123250E ZHNDAi126500E ZHNDAi12801KE PRICE RANK BL BK BM PART DELIVERY J J J DESCRIPTION 0.3mm 250g (1roll) 0.6mm 500g (1roll) 1.0mm 1kg (1roll)
iv
LC-42D62U/LC-62C42U
CHAPTER 1. SPECIFICATIONS
LC-42D62U/LC-62C42U
Service Manual
[1] SPECIFICATIONS
Item LCD panel Number of dots TV-standard (CCIR) TV Function Receiving Channel VHF/UHF CATV
Model: LC-42D62U/LC-62C42U 42" Advanced Super View & BLACK TFT LCD 6,220,800 dots (1920 1080 3 dots)
American TV Standard ATSC/NTSC System VHF 2-13ch, UHF 14-69ch 1-135ch (non-scrambled channel only)
Digital Terrestrial 2-69ch Broadcast (8VSB) Digital cable*1 1-135ch (non-scrambled channel only) (64/256 QAM) Audio multiplex Audio out Terminals Rear INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 ANTENNA BTSC System 10W 2
AV in, COMPONENT in AV in, COMPONENT in S-VIDEO in, AV in Audio in, HDMI in with HDCP HDMI in with HDCP 75 Unbalance, F Type 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE) 1 (PCM/Dolby Digital)
DIGITAL AUDIO OUTPUT Optical Digital audio output OUTPUT OSD language Power Requirement Power Consumption Weight (approx.) Dimension* 2 (W H D) w/o stand with stand w/o stand with stand Audio out English/French/Spanish AC 120 V, 60 Hz 247 W 66.2 lbs./30.0 kg 73.5 lbs./33.3 kg 4019/ 32 4019/ 32 2637/ 64 287/ 8 59/ 32 inch 111/ 2 inch
Operating temperature
* 1 Emergency alert messages via Cable are unreceivable. * 2 The dimensional drawings are shown on the inside back cover. As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
11
LC-42D62U/LC-62C42U
Service Manual
Part names
TV (Front)
NOTE
*OPC: Optical Picture Control. **TV status indicator.
TV (Rear)
Channel buttons (CH / ) HDMI terminal (INPUT 5) HDMI terminal (INPUT 4) Volume buttons (VOL - / + ) INPUT button
POWER button
Antenna/Cable in
INPUT 3 terminals
INPUT 1 terminals
21
LC-42D62U/LC-62C42U
Part names
Remote control unit
1 14
1 2 3 4 TV POWER: Switch the TV power on or enters standby mode. DISPLAY: Display the channel information. SOURCE POWER: Turns the power of the external equipment on and off. External equipment operational buttons: Operate the external equipment. 0 _ 9: Set the channel. (DOT): INPUT: Select a TV input source. (TV, INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5) VOL / : Set the volume. SURROUND: Select Surround settings. FREEZE: Set the still image. Press again to return to normal screen. EXIT: Turn off the menu screen. SLEEP: Set the sleep timer. AUDIO: Selects the MTS/SAP or the audio mode during multi-channel audio broadcasts. FUNCTION: Switches the remote control for TV, CBL/ SAT, VCR, DVD and AUDIO operation. Indicator lights up for the current mode. * To enter the code registration mode, you need to press FUNCTION and DISPLAY at the same time. LIGHT : When pressed all buttons on the remote control unit will light. The lighting will turn off if no operations are performed within about 5 seconds. This button is used for performing operations in low-light situations. VIEW MODE: Select the screen size.
2 3 4
15
5 6 7 8 9 10 11 12 13
16 5 6 7 8 9 10 17 18 19 20 21 22 11 23 24 25 26 12 13 27
14
15
16
17 ENT: Jumps to a channel after selecting with the 0 _ 9 buttons. 18 FLASHBACK: Return to the previous channel or external input mode. 19 CH / : Select the channel. 20 MUTE: Mute the sound. 21 MENU: Display the menu screen. 22 / / / /ENTER: Select a desired item on the screen. 23 RETURN: Return to the previous menu screen. 24 FAVORITE CH A, B, C, D: Select 4 preset favorite channels in 4 different categories. While watching, you can toggle the selected channels by pressing A, B, C and D. 25 FAVORITE: Register favorite channel. 26 CC: Display captions from a closed-caption source. 27 AV MODE: Select an audio or video setting. (When the input source is TV, INPUT 1, 2 or 3: STANDARD, MOVIE, GAME, USER, DYNAMIC (Fixed), DYNAMIC. When the input source is INPUT 4 or 5: STANDARD, MOVIE, GAME, PC, USER, DYNAMIC (Fixed), DYNAMIC)
NOTE When using the remote control unit, point it at the TV.
22
LC-42D62U/LC-62C42U
Appendix
Removing the stand
Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.
CAUTION
Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching stand Before performing work make sure to turn off the TV. Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
Hex key
Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.)
NOTE To attach the stand, perform the above steps in reverse order.
Using an optional bracket to mount the TV You can ask a qualified service professional about using an optional AN-37AG2/AN-52AG1 bracket to mount the TV to the wall. Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall AN-37AG2/AN-52AG1 wall mount bracket. About setting the TV angle and height adjustment 0 or 5
Vertical mounting
NOTE
Detach the cable clamps on the rear of the TV when using the optional mount bracket.
23
LC-42D62U/LC-62C42U
OPC Backlight Contrast Brightness Color Tint Sharpness Advanced Color Temp. Black 3D-Y/C Monochrome Film Mode Range of OPC
OPC Backlight Contrast Brightness Color Tint Sharpness Advanced Color Temp. Black Monochrome Film Mode Range of OPC
Audio
Audio
Power Control
EZ Setup CH Setup Antenna Setup-DIGITAL Input Skip Input Label Parental CTRL Position Language Reset
Option
Option
Audio Only Digital Noise Reduction Input Select Output Select Color System Caption Setup Program Title Display Favorite CH
NOTE
Some menu items may not be displayed depending on the selected input source.
Digital Setup
Audio Setup
24
LC-42D62U/LC-62C42U
CHAPTER 3. DIMENSIONS
LC-42D62U/LC-62C42U
Service Manual
[1] DIMENSIONS
Unit: inch/(mm)
3647/ 64 (933.0)
2023/ 32 (526.0) 287/ 8 (733) 2637/ 64 (675)
29/ 32 (58)
1637/ 64 (421)
77/ 8 (200)
323/ 64 (85)
31
LC-42D62U/LC-62C42U
Manual
3 1
SD Card Cover
2
Rear Cabinet
41
LC-42D62U/LC-62C42U
4. Remove the 4 lock screws and detach the Chassis Fixing Angle. 5. Remove the 4 lock screws and detach the Center Angle (L)(R). 6. Remove the 2 lock screws and detach the Stand Assist Angle. 7. Remove the 2 lock screws and detach the Stand Assist Cover. 8. Remove the 4 lock screws and detach the Stand Fixing Angle. 9. Remove the 7 lock screws, 1 lock screw and detach the MAIN Shield and Earth Plate.
5 9
Center Angle (R)
8
Chassis Fixing Angle
6 7
Stand Assist Angle
4 4
42
LC-42D62U/LC-62C42U
10.Disconnect all the connectors from all the PWBs. 11.Remove the Top Cover Ass'y. Remove the 1 lock screw from the Top Cover Ass'y and detach the KEY Unit.
KEY Unit
11
10 10
10
10
43
LC-42D62U/LC-62C42U
12.Remove the 7 lock screws and detach the Tray Chassis. 13.Remove the 2 lock screws, 3 lock screws, 2 lock screws and detach the Terminal Angle. 14.Remove the 5 lock screws and detach the POWER Unit. 15.Remove the 4 lock screws and detach the TERMINAL Unit. 16.Remove the 3 lock screws, 3 lock screws and detach the MAIN PWB Radiator and MAIN Unit. 17.Remove the 2 lock screws and detach the Speaker (L)(R). 18.Remove the 2 lock screws and detach the R/C, LED Unit.
16 14 16
MAIN Unit
16 13 13 12
POWER Unit Tray Chassis
13
15
Speaker (R)
Speaker (L)
17
18
R/C, LED Unit
17
44
LC-42D62U/LC-62C42U
19.Remove the 4 lock screws and detach the Tray Fixing Angle (L)(R). 20.Remove the 7 lock screws and detach the Lug Angle Top. 21.Remove the 8 lock screws and detach the Lug Angle Bottom. 22.Remove the LCD Panel Module.
20 19
Tray Fixing Angle (R)
20
20
20
20 19
19 21
21
21
21
21
19 21
45
PartsGuide
LC-42D62U/LC-62C42U
PARTS GUIDE
No. S86V9LC42D62U
Note: The reference numbers on the PWB are arranged in alphabetical order.
MODELS
CONTENTS
LC-42D62U LC-62C42U
[1]
PRINTED WIRING BOARD ASSEMBLIES (NOT REPLACEMENT ITEM) LCD PANEL (NOTE: THE PARTS HERE SHOWN ARE SUPPLIED AS AN ASSEMBLY BUT NOT INDEPENDENTLY.) DUNTKD934FM03/04 (LC-42D62U/ LC-62C42U) (MAIN Unit)
[4] [5]
CABINET AND MECHANICAL PARTS SUPPLIED ACCESSORIES PACKING PARTS (NOT REPLACEMENT ITEM) SERVICE JIGS (USE FOR SERVICING)
[2]
[6] [7]
[3]
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
This document has been published to be used for after sales service only. The contents are subject to change without notice.
LC-42D62U/LC-62C42U
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
[2] LCD PANEL (NOTE: THE PARTS HERE SHOWN ARE SUPPLIED AS AN ASSEMBLY BUT NOT INDEPENDENTLY.)
N R2015 R2026 R2079 R1LK420D3LF21 EQ X 42" WIDE LCD Panel Module Unit
LC-42D62U/LC-62C42U
3-1 3-2 22 34 47 41
40 51
KEY Unit
20
1-10 1 1-7
36 20 1-7 1-7 1-7 1-7 1-7 1-10 1-3 1-9 1-8 1-8 1-9 1-8 1-9 1-4 1-2 43 21 39
POWER Unit R/C, LED Unit
41
37 47 2 48 44 14 42 26
2-1
44
43 43 21
2-2
45 52 38 43 9-4 9-4 9-3 9-3 55 9-1 16 43 49 6-1 9-2 43 43 9-3 43 50 16 43 48 48 53 45 45 33 27 15 23 TERMINAL Unit 35
MAIN Unit 28
43 43 45 56 45 29 56 31 45 24 11 17 43 43 19 18 48 43
30 30
9 48 6 43 43 48 43
32
46 12 10 13 54 4
6-2 7-1 48
7-2 48 48
25
LC-42D62U/LC-62C42U
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
[LC-42D62U] [LC-62C42U]
AF -
[LC-42D62U] [LC-62C42U]
AY AB AZ AB EQ BA AB AB AB AG AF AH AH AH AK AM AU AL AM AS AD AC AC AC AE AB AM AV AK AG AK AH AF AP AH AM AN AQ AY AZ AA AB AA AA AA AE
N N N N N N N N N N N N
[LC-42D62U] [LC-62C42U]
N N N N N N N N
N N AN S AA S AB
LC-42D62U/LC-62C42U
X2
Cable Clamp
X4 X10
Cable Band
X3
X6
Operation Manual
X7
X8
Stand Unit
NO.
PARTS CODE
PART DELIVERY
DESCRIPTION
X1 X2 X3 X4 X5 X6 X6 X7 X8 X8 X9 X10
QACCDA039WJPZ RRMCGA535WJSA LHLDWA131WJKZ LHLDWA083WJ00 TCADEA208WJZZ TiNS-C762WJZZ TiNS-C763WJZZ Not Available CDAi-A327WJ02 CDAi-A327WJ04 TCAUHA184WJZZ LHLDWA012WJKZ
AR BA AE AD AQ AM AD AC
N N N N N N
X X J X X X X X X X J
AC Cord Remote Control Unit Cable Clamp Cable Band Enquete Card Operation Manual Operation Manual "AAA" Size Battery Stand Unit Stand Unit Setup Guide Wire Holder
LC-42D62U/LC-62C42U
S10
S4
S4
S6 S7 S8 S9 S13
S5
S1
S3 S12
S4 S4
S2
LC-42D62U/LC-62C42U
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
[LC-42D62U] [LC-62C42U]
[LC-42D62U]
LC-42D62U/LC-62C42U
COPYRIGHT
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.
TQ2052-S Sep. 2006 Printed in Japan Design and Production Information Design: Japan Production: SEMEX SY. KD
SHARP CORPORATION AV Systems Group CS Promotion Center Yaita, Tochigi 329-2193, Japan