Beruflich Dokumente
Kultur Dokumente
Ô Inside
Home Theater Products 4-15
Flat-Panel TVs 16-23
and Displays
Portable Audio 24-37
Professional Audio 38-43
Selection Guides 44-51
Resources 52-55
2 Audio Solutions Guide
Ô Table of Contents
TI Worldwide Technical Support
Home Theater Products 4
Internet
AV Receivers ................................................................................4 TI Semiconductor Product Information Center Home Page
support.ti.com
Featured Products: TAS5518, TAS5182, DSD1608,
TI Semiconductor KnowledgeBase Home Page
PCM1850/PCM1851, TSB43CA43A/TSB43CB43A....................................................5 support.ti.com/sc/knowledgebase
Printed in U.S.A. by The Jarvis Press, Inc. Dallas, Texas, on recycled paper
Ô
Audio Systems
In today’s marketplace for audio equipment, designers are challenged flexibility give designers the ability to build audio systems with more
to satisfy very demanding consumers who expect high-quality, functionality and a true, lifelike sound experience at a competitive cost.
multifunction audio products that are cost competitive and feature
rich. Consumers expect the very best listening experience from any Get to market fast with TI's analog and DSP solutions for audio
audio format, any source and from both home and mobile audio applications. TI provides the silicon, software, systems expertise and
systems. This places a great deal of pressure on designers to support for the entire audio signal chain. From industry-leading DSPs
minimize engineering tradeoffs while quickly bringing new and and high-performance analog to logic and an extended portfolio of
compelling audio products to market. application software, TI delivers the most reliable, scaleable and
power-efficient solutions for the most complex to the simplest audio
In response to the needs of audio designers, TI offers all-digital designs.
audio components as well as digital+analog audio solutions.
Programmable components with performance headroom and design Please read on to find out more about TI’s solutions for audio
applications.
Digital
Input
• S/PDIF
• IEEE 1394
Digital Power
• USB PWM Stage Filter
I/F
Option 1
DSP Option
Analog (Decode and Options 2A
Analog
Input Post Processing) 2A and 2B Input
• Tape Class-D
• Tuner
Option
• Mic 2B Filter,
• 5.1 Analog in ADC Volume, Analog
Storage DAC Amp
EQ
• CD/CD-ROM • Hard-drive
• DVD • Flash
• Mini-disc Memory
Under the surface, all modern audio systems are the same — even 21st century systems.
Ô
superior analog performance throughout the entire audio signal chain
To Know More
require careful attention to semiconductor device selection, power
For detailed information about TI products: supply design and PCB layout.
TAS5518: 8-Channel, 110-dB Digital Audio PWM Processor 5
TAS5182: Stereo Digital Amplifier Power Stage Controller 5 TI enables AV end equipment to take advantage of these formats and
deliver not only the highest performance, but also the most
DSD1608: Low-Cost, 8-Channel PCM-/DSD-Compatible DAC 6
cost-effective solutions to the consumer. The highest quality DVD-
PCM1850 and PCM1851: Stereo ADC with Input Multiplexer 6 Audio data rate of 192 kHz can be sent across a single 1394 cable
TSB43CA43A and TSB43CB43A: Second-Generation, connected to an AV receiver, offering high-quality digital audio in a
IEEE 1394a Integrated Link/PHY 7 system that’s easy to set up. The Aureus™ audio DSP provides the
processing power to handle the myriad of decoding formats. TI’s
Burr-Brown audio data converter products offer the full range of
High-quality digital audio formats, such as DVD-audio and SACD, performance, enabling both high-end and cost-sensitive systems.
present AV receiver system designers with many engineering PurePath Digital™ power amplifier solutions preserve the original
challenges. Digital connectivity, content protection, compatibility quality of the source and deliver high power in a sleek form factor.
with new decoding standards and the need for fast data rates with
0-8 S/PDIF
Out
1-3 Optical
Digital In SBR
TAS5182
Power SBL
DVD/DVP Stage
Optical L
Set-Top/ TAS5182
Digital Radio Digital
Power
Receiver R
TAS5518 Stage
CD
Modulator TAS5182 LS
Power
Stage RS
S/PDIF In
(High Quality) TAS5182 C
S/PDIF Power
DVD/DVP Aureus™ Stage
Set-Top Box Receiver LFE
DSP
DA6xx
Room No. 2 – 7.1 Analog Amplification
8 Ch 1
DAC Filter Volume Amp
PCM1850 Power DSD1608 8
5.1 Analog In Management
R L
6-Input
Multiplexer Stereo
ADC
Ô
AV Receivers
8-Channel, 110-dB Digital Audio PWM Processor Stereo Digital Amplifier Power Stage Controller
TAS5518 TAS5182
Get samples, datasheets, evaluation modules and app reports at: Get samples, datasheets, evaluation modules and app reports at:
www.ti.com/sc/device/TAS5518 www.ti.com/sc/device/TAS5182
The TAS5518 is an eight-channel digital pulse width The TAS5182 is TI’s high-power stereo digital audio
modulator (PWM) that provides superior dynamic amplifying gate driver, able to deliver continuous
range performance and a high level of system integra- 150-W RMS at less than 0.1% THD+N. With its
tion. Typical dynamic range in a well-designed system is 110 dB and industry leading efficiency, the TAS5182 is the premier choice for
the power supply volume control (PSVC) feature provides up to 24 dB high-power and audio precision amplifiers.
of additional dynamic range at normal listening levels.
Key Features
Key Features • Stereo H-Bridge driver
• 8-channel PWM with 110-dB dynamic range • High-power output:
• Record-line and headphone outputs • 150 W, 4 RMS, < 0.1% THD+N
• High-performance 48-bit data path audio processing • 100 W, 6 RMS, < 0.1% THD+N
• Bass management • 90 W, 8 RMS, < 0.2% THD+N
• Tone control • THD+N < 0.10% full power range 20-20 kHz
• Seven cascaded second order bi-quad per channel • Self-protection design (including under-voltage, over-temperature,
• Loudness control and short-circuit protection) with error reporting
• Triple slope DRC/expander • High audio performance
• +36 to –100 dB volume control • 110-dB SNR when used with TAS5518
• Programmable soft volume • 0.1% THD+N (typ)
• Extensive input and output mixing support • 32- to 192-kHz sampling rates supported
• Power supply volume control • Low EMI design passes regulatory requirements
• < 0.1% THD+N (typ with TAS5182) • Click and pop free
• 32- to 192-kHz sampling rates supported
• 16-, 20- or 24-bit input format Applications
• Click and pop free • AV receivers
• Intelligent AM interference solution • DVD receivers
• Powered subwoofers
Applications • Mini/micro components
• AV receivers • Digital automotive amps
• DVD receivers
CH 1
GVDD
CH 2
GVDD
Power Supply Digital Audio PWM BST
BST
Processor Processor A,B,C,D
MCLK POS
XTL_OUT Auto Mute Headphone A,B,C, D HS
Data
XTL_IN Parametric EQ, PWM 1 Gate
and 8x8 8x2 PWM NEG
SCLK Tone Control, A,B,C, D POS
Clocks Cross- Cross- PurePath Buffer Channel Drive OUTA
LRCLK
Bar
Loudness,
Bar Digital™ PWM Timing
SDNI:4 Bass PWM 8 NEG Receiver
Mixer Mixer Modulator Back- /RESET_AB Control LS OUTB
Management,
End
SDA Cross Over, /BKND_ERR Gate
Controls /RESET_CD OUTC
SCL DRC/Expander VALID Drive
/RESET System Protection OUTD
/PDN Control
Volume Control PSVC
/TBASE_SEL PSVC
/MUTE
/HP_SEL
LOW/HIZ
/SD
OT OC H
ERR1
TAS5518 Block Diagram Protection OHL
ERR0 UVP TEMP
For datasheets, samples and app reports visit: Get samples, datasheets, evaluation modules and app reports at:
www.ti.com/sc/device/DSD1608 www.ti.com/sc/device/PCM1850 and www.ti.com/sc/device/PCM1851
The DSD1608 is an eight-channel PCM-/DSD-compatible DAC. The The PCM1850 is a high-performance, low-cost stereo analog-to-digital
DSD1608 supports the new TDMCA mode, which allows eight converter that features an input multiplexer (MUX) and wide-range
channels of audio data and all control commands to share a single programmable gain amplifier (PGA). The input MUX allows the user to
interface. This conserves port resources, simplifies board design and connect up to six stereo sources, which may be selected through SPI
shortens prototyping time. If TDMCA or dedicated DSD support are not (PCM1850) or I2C (PCM1851) control interfaces.
required, the six-channel PCM1606 or eight-channel PCM1608 are also
Key Features
available.
• Input multiplexer, six stereo channels
Key Features • PGA gain: +11 to –11 dB range, 0.5 dB step
• Data word length:16/18/20/24 bits for PCM, direct stream • SNR: 100 dB (typ)
for DSD • SPI (PCM1850) or I2C (PCM1851) control
• Sampling rate (fS): • Sampling rate: 16 to 96 kHz
• Up to 192 kHz for PCM format • System clock: 256 fS, 384 fS, 512 fS or 768 fS
• 2.8224 MHz (64 X 44.1 kHz) for DSD format • +5 V for analog, +3.3 V for digital
• 8-channel single-ended voltage output • Package: 32-pin TQFP, Pb-free
• System clock: 128 fS, 192 fS, 256 fS, 384 fS, 512 fS or 768 fS for PCM;
256 fS, 384 fS, 512 fS or 768 fS for DSD Applications
• Analog performance (at VCC = 5 V, PCM/DSD mode) • DVD recorders
• DYR: 105 dB, SNR: 105 dB, THD+N: 0.002% • AV amp receivers
• Full-scale output: 4.0 Vpp • CD recorders
• 8X oversampling digital filter included (PCM format only) • MD recorders
• Package: 52-pin TQFP • Multitrack receivers
Applications
VINL1
• Universal AV players VINL2
VINL3 BCK
Single-Ended Delta-Sigma
• Super audio CD players VINL4
MUX and PGA Modulator LRCK
VINL5
• Car audio systems VINL6
DOUT
MOUTL
Audio
Data
Decimation OVER
VREF1 Interface
Output Amp & VOUT1 Filter
PRCK DAC Low-Pass Filter VREFS Reference
with
PLRCK VREF2
PCM High-Pass Control MS (ADR)(1)
Output Amp & VOUT2 Filter
PCM Filter DAC Data
MD (SDA)(1)
PDATA1 Low-Pass Filter VCOM1
I/F (X8 DF) Interface
PDATA2 VINR1 MC (SCL)(1)
PDATA3 Output Amp & VOUT3 VINR2
DAC Low-Pass Filter
PDATA4 VINR3
Single-Ended Delta-Sigma
VOUT4 VINR4 TEST0
Enhanced Output Amp & MUX and PGA Modulator
PSCK DAC VINR5 TEST1
System System Multi- Low-Pass Filter
VINR6
DSCK Clock Clock Level
Output Amp & VOUT5 MOUTR
∆∑ DAC Low-Pass Filter
DBCK Modulator
RST
DSD1 Output Amp & VOUT6 Clock and Timing Control
DSD2 DAC Low-Pass Filter VCOM2 Power Supply SCKI
DSD3 DSD DSD
I/F Filter Output Amp & VOUT7
DSD4 DAC Low-Pass Filter
DSD5 VCC AGND DGND VDD
DSD6 Output Amp & VOUT8 (1) PCM1850 (PCM1851)
DSD7 DAC Low-Pass Filter
DSD8
PCM1850 Block Diagram
MS
MC Function Zero Detect Power Supply
MDI Control
MDO
Ô
AV Receivers
Second-Generation, IEEE 1394a MPEG2
DVB
Integrated Link/PHY MPEG2 HSDI 0
ISO
HSDI 0 CFRs
DSS
TSB43CA43A and TSB43CB43A ISO M6
FIFO
4 KB
DV Port Cipher
PCM
Get samples, datasheets, evaluation modules and app reports at: Audio
1384a-2000
1384a-2000
HIW S400 1394
S/PDIF Link-Layer
www.ti.com/sc/device/TSB43CA43A and AKE Core
3-Port Bus
PHY Core
www.ti.com/sc/device/TSB43CB43A MPEG2
DVB M6
MPEG2 Cipher ISO
DSS HSDI 1 HSDI 0 Packetizer
The TSB43CA43A content-protected (5C) and TSB43CB43A (non-5C) DV ISO
FIFO
4 KB
Port
are highly integrated 1394 audio solutions that enable a simple Super
Audio CD
one-cable digital connection between audio components. Audio over Audio ASYNC ASYNC ASYNC ASYNC
S/PDIF
RX 1X D FIFO 1X D FIFO 1X D FIFO 1X D FIFO
1394 can support high sample rates, multiple channels, and even 5C PCM/ SYT PLL 2 KB 2 KB 2 KB 2 KB
Audio
streaming between a DVD-Audio/SACD player and an AV receiver.
Configuration Registers (CFRs)
Key Features
• Integrated 3-port 400-Mbps 1394a PHY Monitor
LEB 256KB RAM
• DTCP content protection enabled with two 5C ciphers and hardware 16
UART
Data Program
AKE acceleration Memory
Timer
• Support for IEC61883, including MPEG2, DirecTV (DSS), DV 10 AND 0
Address Ext.
and audio (A&M) MCU Comm
I/F Memory
• Integrated programmable ARM® processor with 256K bytes of 20 Timer
Control 1
internal program memory 1 KB 1 KB
• Dual high-speed data interfaces and 16K FIFO Shared RAM WDOG 1
Timer 2
• Audio support (IEC61883-6 formatting) 12
ARM/TDMI
GP I/O CFRs
RISC
• Audio formats supported Core
JTAG
Port
ARM®
Debugger
• IEC 60958/IEC 61937
• Multibit linear audio (raw audio and DVD audio) TSB43CA43A Block Diagram
• SACD
• Audio interfaces supported
• S/PDIF
• I2S
• MLPCM interface
• Low-power modes
• Package: 176-pin BGA (TSB43CA43A), 176-pin LQFP (TSB43CB43A)
Applications
• AV receivers
• DVD and CD players
• Speakers and powered subwoofers
Ô
As digital living room devices proliferate, consumers are moving beyond
To Know More stand-alone DVD players and embracing integrated entertainment solu-
For detailed information about TI products: tions such as DVD receivers used in home theater in a box (HTiB). HTiBs
PCM1802: Single-Ended Analog Input Stereo ADC 9 represent unique challenges and opportunities for consumer electronics
PCM1803: Cost-Effective Stereo ADC for DVD 9 manufacturers to replicate the theater experience in sleek form factors
in tune with consumers’ home environments. The audio technology pro-
PCM1804: Differential Input High-Performance Stereo ADC 10
vided by TI powers the HTiBs’ capabilities, replicating the thundering
PCM1791A: Advanced Segment Audio Stereo DAC 10 bass and extremes in dynamic range of the theater experience.
TAS5086: 6-Channel Digital Audio PWM Processor 11
TI's PurePath Digital™ audio amplifier, with its unmatched power
TAS5186: 6-Channel, 5 x 30-W + 1 x 60-W Power Stage 11 efficiency and pristine audio performance, provides consumer
TAS5142 and TAS5152: 2-Channel, 100-/125-W Power Stages 12 electronics manufacturers the ability to integrate the performance
PCM1680: Cost-Effective, 8-Channel DAC 12 and power levels of expensive and bulky amplifiers into sleek
consumer-oriented equipment.
PCM178x: High-Performance Stereo DAC Converter 13
PCM1753, PCM1754 and PCM1755: Stereo 192-kHz, 24-Bit DACs 13 TI Solutions for All Key Power Levels
Other TI Products for This Market: Power Level (RMS, Power
FTC power rating) Configuration PWM Processor Stage(s)
TPA6110A2: See www.ti.com/sc/device/TPA6110A2
120-200 W 5.1: 5 x 30 W + 60 W TAS5086 TAS5186
300W 5.1: 40Wx5 + 100W TAS5086 or TAS5508 TAS5142x2
400W 5.1: 45Wx4+110Wx2 TAS5086 or TAS5508 TAS5152x2
500W 5.1: 5x75 W + 125 W TAS5086 or TAS5508 TAS5152x3
600W 5.1: 100Wx6 TAS5086 or TAS5508 TAS5142x3
1000W 7.1: 125Wx8 TAS5086 or TAS5508 TAS5152x4
Servo Control
SP3721
DSD/PCM
Converter
DSD1702
Power Stages
3 x TAS5142/
3 x TAS5152/
AM/FM 1 x TAS5186
Tuner
PCM1754
or Lineout
Power Supply PCM1781
UC3844
TLV2362
DVD Receiver Block Diagram
Ô
DVD Receivers
Single-Ended Analog Input Stereo ADC Cost-Effective Stereo ADC for DVD
PCM1802 PCM1803
Get samples, datasheets, evaluation modules and app reports at: Get datasheets and app reports at: www.ti.com/sc/device/PCM1803
www.ti.com/sc/device/PCM1802
The PCM1803 is a cost-effective, high-performance
The PCM1802 is a high-performance, low-cost, single-chip stereo
PREVIEW * single-chip stereo analog-to-digital converter
analog-to-digital converter with single-ended analog voltage input. It with single-ended inputs. It uses a delta-sigma modulator with
uses a delta-sigma modulator with 64-/128-times oversampling and 64-/128-times oversampling and includes both digital decimation
includes a digital decimation filter and HPF (low cut filter), which and high-pass filters.
removes the dc component of the input signal. For various applications,
Key Features
the PCM1802 supports master and slave modes and four data formats
• Single-ended voltage input: 3 Vpp
in serial interface. The PCM1802 is suitable for a wide variety of cost-
• THD+N: –95 dB
sensitive consumer applications where good performance, 5-V analog
• Dynamic range and SNR: 103 dB
supply and 3.3-V digital supply operation are required.
• Sampling rate: 16 to 96 kHz
Key Features • System clock: 256 fS, 384 fS, 512 fS or 768 fS
• 24-bit delta-sigma stereo ADC • Power supply: +5 V analog; +3.3 V digital
• Single-ended voltage input: 3 Vpp • Package: 20-pin SSOP, Pb-free
• Antialiasing filter included
Applications
• High performance:
• AV amp receivers
• THD+N: 96 dB (typ)
• MD players
• SNR: 105 dB (typ)
• CD/DVD recorders
• Dynamic range: 105 dB (typ)
• Multitrack receivers
• Sampling rate: 16 to 96 kHz
• Electric musical instruments
• System clock: 256 fS, 384 fS, 512 fS or 768 fS
• Dual power supplies: 5 V for analog, 3.3 V for digital
* Expected release March 2005
• Package: 20-pin SSOP, Pb-free
Applications
• AV amp receivers VIN L Delta-Sigma BCK
Modulator LRCK
• MD players DOUT
Serial
• CD recorders 1/64, x1/128 Interface
VREF 1 Decimation
• Multitrack receivers Reference Filter
• Electric musical instruments VREF 2 Mode/
with Format FMT0
High-Pass Control FMT1
Filter
Delta-Sigma MODE0
VIN R
Modulator MODE1
Single-End 5th Order
BCK
VIN L /Differential Delta-Sigma
Converter Modulator LRCK BYPASS
FSYNC TEST
Serial
1/64 ( 1/128) Interface OSR
VREF1 Decimation DOUT
Reference Filter Power Supply Clock and Timing Control PDWN
VREF 2 with Mode/ SCKI
DC Cut Filter Format FMT0
Control FMT1
Single-End 5th Order
MODE0 VCC AGND DGND VDD
VIN R /Differential Delta-Sigma
Converter Modulator MODE1
PCM1803 Block Diagram
BYPASS
OSR
Power Supply Clock and Timing Control PDWN
SCKI
Get samples, datasheets and app reports at: Get samples, datasheets, evaluation modules and app reports at:
www.ti.com/sc/device/PCM1804 www.ti.com/sc/device/PCM1791A
The PCM1804 is a two-channel audio ADC that offers a high level of The PCM1791A is a monolithic CMOS integrated circuit that includes
analog performance with native single-bit DSD output capability. stereo digital-to-analog converters and support circuitry. The data
converters use TI’s advanced segment DAC architecture for excellent
Key Features
dynamic performance and improved tolerance to clock jitter.
• Power dissipation 225 mW (single rate, fS = 48 kHz)
• 24-bit PCM resolution, 1-bit 64 fS DSD Key Features
• All functions set by pins, no system controller required • 24-bit resolution
• Analog performance: • Analog performance:
• DYR: 112 dB (typ); THD+N: 0.0008% (typ) • Dynamic range: 113 dB
• Fully differential analog input: 5 Vpp (typ) • THD+N: 0.001%
• Linear phase decimation filter: • Full-scale output: 2.1 V RMS (at post amp)
• Stop-band attenuation: –100 dB • Differential voltage output: 3.2 Vpp
• Pass-band ripple: ±0.005 dB • 8X oversampling digital filter:
• Sampling frequency: 32 to 192 kHz • Stop-band attenuation: –82 dB
• PCM data format: Standard, I2S and left-justified, in master or • Pass-band ripple: ±0.002 dB
slave mode • Sampling frequency: 10 to 200 kHz
• Peak detection function • System clock: 128, 192, 256, 384, 512 or 768 fS with auto detect
• High-pass filter (fS/48000), can be bypassed • Accepts 16-, 20- and 24-bit audio data
• System clock: 128 fS, 192 fS, 256 fS, 384 fS, 512 fS or 768 fS • Data formats: standard, I2S and left-justified
• +5-V analog power supply, +3.3-V digital supply • Package: 28-pin SSOP, Pb-free
• Package: 28-pin SSOP
Applications
Applications • AV receivers
• Integrated AV receivers • DVD movie players
• High-quality DVD, MD and CD-RW recorders • SACD players
• Musical instruments • HDTV receivers
• Digital audio workstations • Car audio systems
• Digital multitrack recorders
OSR0
CLK
SCK1 Control OSR1
OSR2 LRCK
Audio Current V OUT L
BCK Segment
Data Input
VINL+ Delta-Sigma Decimation DATA DAC V OUT L+
HPF I/F
VINL– Modulator (L) Filter (L) and I/V
S/M Buffer
8x
VCOML FMT0 D/S and
Over- Filter
AGNDL FMT1 Sampling
VREFL Serial MUTE Advanced
LRCK/ Digital
VREFL Output DSDBCK RST Segment Bias V COM
Interface BCK/ Filter DAC and
DSDL MSEL and V REF
Modulator
VREFR OVFL Function
VREFR
AGNDR OVFR MDO Control
VCOMR Current V R+
MDI Function Segment OUT
VINR+ MC Control DAC
Delta-Sigma Decimation VOUT R
Modulator (R) Filter (R) HPF I/F
VINR– MS and I/V
Buffer
D/S and
Filter
ZEROL
System
BYPASS Zero Clock
ZEROR Power Supply
Power Supply
Detect Manager
RST
AGNDR
DGND
VDD
AGNDF
AGNDC
VCC R
SCK
V CC F
VCC L
Ô
DVD Receivers
6-Channel Digital Audio PWM Processor 6-Channel, 5 x 30-W + 1 x 60-W Power Stage
TAS5086 TAS5186
MUTE
Error
PDIN
Applications
PLL FLTM Clock, PLL, IIC Reset, Power- Power Regulation
PLL_FLTP Interface Down, Status
VALID2 • DVD receivers
Power Regulation VALID1
* Expected release March 2005
SCLK
Ch Vol PWM Conv. PWM1
LRCLK
8-Ch
MCLK Serial PWM Conv.
Bass Ch Vol PWM2 Gate Drive A H-Bridge A
SDIN1 Audio Master
Input and Management Volume
SDIN2 Ch Vol PWM Conv. PWM3 Gate Drive B H-Bridge B
Mapping and with
SDIN3 DC Auto PWM Gate Drive C H-Bridge C
SDIN4 Ch Vol PWM Conv. PWM4
Blocking Mute
Receivers
Gate Drive D H-Bridge D
SDOUT1 Ch Vol PWM Conv. PWM5
Dolby
(IIS Line Out) Downmix Gate Drive E H-Bridge E
Ch Vol PWM Conv. PWM6
Gate Drive F H-Bridge F
Get datasheets at: www.ti.com/sc/device/TAS5142 and * The PCM1680 is a cost-effective, eight-channel, high-
www.ti.com/sc/device/TAS5152 PREVIEW performance digital-to-analog converter. Utilizing TI’s
enhanced multilevel delta-sigma architecture it achieves excellent
The TAS5142 and TAS5152 are high-
PREVIEW * performance integrated stereo digital signal-to-noise performance and a high tolerance to clock jitter. The
PCM1680 is also footprint-compatible with the PCM1780 stereo DAC,
amplifier power stages designed to drive 4-Ω speakers enabling faster design time for multiple product families.
at 100 W and 125 W per channel respectively. They are pin-compatible
and require only a simple passive demodulation filter to deliver high- Key Features
quality, high-efficiency audio amplification. • THD+N: 0.002%
• Dynamic range and SNR: 105 dB
Key Features • Full-scale output: 3.9 Vpp (typ)
• TAS5142 Po – 2 x 100 W @ 10% THD+N BTL into 4 Ω • Single power supply: +5 V analog; +5 V digital
• TAS5152 Po – 2 x 125 W @ 10% THD+N BTL into 4 Ω • Sampling rate: 5 to 200 kHz
• 100 dB (A-wtd) SNR • System clock: 128 fS, 192 fS, 256 fS, 384 fS, 512 fS, 768 fS or 1152 fS
• < 0.1% THD+N @ 1 W • Package: 28-pin TSSOP, Pb-free
• Supports PWM frame rates of 192 to 384 kHz
• Power stage has > 90% efficiency Applications
• Enhanced OC detection circuit allows use of smaller inductor cores • Integrated AV receivers
• Resistor programmable current limit enables lower-cost power • DVD movie and audio players
supplies • HDTV receivers
• Power on Reset for protected power up without any power supply
sequencing * Expected release March 2005
• Self-protection design (including under-voltage, over-temperature,
and short-circuit protection) with error reporting Output Amp & VOUT1
BCK DAC Low-Pass Filter
• Stand-alone protection recovery LRCK
Output Amp & VOUT2
• Pb-free soldering supported DATA1<1,2>
Serial DAC Low-Pass Filter
Input
DATA2<3,4>
• EMI compliant when used with recommended system design DATA3<5,6>
I/F
DAC
Output Amp & VOUT3
Low-Pass Filter
DATA4<7,8> 8x
• Package: 36-pin SSOP Over- VOUT4
Enhanced Output Amp &
Sampling DAC Low-Pass Filter
Multi- VCOM
Applications Digital Level
Filter Delta- Output Amp & VOUT5
DAC Low-Pass Filter
• AV receivers with Sigma
MS/ADR Function Modulator
Output Amp & VOUT6
• DVD receivers MC/SCL Controller DAC Low-Pass Filter
MD/SDA Function
Control Output Amp & VOUT7
* Expected release February 2005 DAC Low-Pass Filter
MSEL I/F
Output Amp & VOUT8
DAC Low-Pass Filter
DVD Receivers
High-Performance Stereo DAC Converter Stereo 192-kHz, 24-Bit DAC
PCM178x PCM1753, PCM1754 and PCM1755
Get datasheets at: www.ti.com/sc/device/PARTNUMBER Get samples, datasheets, evaluation modules and app reports at:
(Replace PARTNUMBER with PCM1781 or PCM1782) www.ti.com/sc/device/PARTNUMBER
(Replace PARTNUMBER with PCM1753, PCM1754 or PCM1755)
The PCM1780/81/82 are cost-effective, high-
PREVIEW * performance stereo digital-to-analog converters. The PCM175x family offers the most cost-effective stereo DAC
solution. The devices operate from a single 5-V supply and achieve
Utilizing TI’s enhanced multi-level delta-sigma architecture, they
excellent dynamic range and SNR performance in a small, 16-pin
achieve excellent dynamic performance and improved tolerance to
TSSOP package.
clock jitter. The PCM1780 is footprint-compatible with the PCM1680
eight-channel DAC, enabling faster design time for multiple product Key Features
families. • Low-cost stereo 192-kHz, 24-bit DAC
• Analog performance (at VCC = 5 V):
Key Features
• DYR: 106 dB
• THD+N: 0.002%
• THD+N: 0.002%
• Dynamic range and SNR: 106 dB
• 4X/8X oversampling digital filter
• Full-scale output: 3.9 Vpp (typ)
• Stop-band attenuation: –50 dB
• Sampling rate: 5 to 200 kHz
• Sharp roll-off/slow roll-off selectable
• System clock: 128 fS, 192 fS, 256 fS, 384 fS, 512 fS, 768 fS or 1152 fS
• System clock: 12 V 256 fS, 384 fS, 512 fS or 768 fS auto detect
• Single power supply: +5 V
• Software (PCM1753, PCM1755) or hardware (PCM1754) control
• Package: 16-pin SSOP, Pb-free
• Package: 16-pin TSSOP
Applications
Applications
• AV receivers
• AV receivers
• DVD movie players
• Home theater in a box
• DVD audio players
• HDTV receivers
* Expected release March 2005 BCK
Output
Audio
Amp and
LRCK Serial VOUTL
BCK 4X/8X Enhanced DAC Low-Pass
Port
Over- Multi- Filter
Output
Audio DATA Sampling Level
Amp and
LRCK Serial VOUTL Digital Delta-
4X/8X DAC Low-Pass
Port Enhanced Filter
Filter Sigma VCOM
Over- Multi-
ML with Modulator
DATA Sampling Level Function Output
Digital Delta-
Serial Controller Amp
Filter Sigma VCOM DAC
with Modulator MC Control and VOUTR
(FMT)
Function Output Port Low-Pass
MS Controller Amp Filter
(DEMP0) Serial
DAC and MD
Control VOUTR
MC Low-Pass
(DEMP1) Port System Clock
Filter
MD
(MUTE) System
System Clock SCK Clock Zero Detect Power Supply
TEST Manager
System
SCK Clock Zero Detect Power Supply
Manager
ZEROL ZEROR VDD DGND VCC AGND
Ô To Know More amplifier solution. TI’s TAS5112 is the industry’s smallest all-digital
amplifier and can drive two channels at 30 W with a very small
For detailed information about TI products:
footprint and PCB heatsinking. TI has many PWM processors to
TAS3103: Digital Audio Processors 15 choose from including the two-channel TAS5010 and the
PCM270x and PCM290x: Stereo Audio DACs and Codecs four-channel TAS5504.
with USB Interface 15
Other TI Products for This Market:
Both digital TV and mini-component systems require a cost-effective
digital audio processing solution to provide volume, treble, bass and
TPA6110A2: See www.ti.com/sc/device/TPA6110A2
sound effects. TI has released the TAS3103 to provide this solution
at a very cost-effective price point. The TAS3103 can mux up to
TI is one of the few companies that can supply the broad range of eight channels input and digitally process three channels. The
products needed in today’s mini-component and digital TV systems. TAS3103 can also perform sound effects such as TruSurround XT,
From DACs and ADCs to advanced processing and digital amplifica- BBE, QSound and other audio algorithms popular in the DTV and
tion, TI has a solution available. mini-compo market. With the third channel a single TAS3103 can
either perform bass management on two channels or process a dis-
Digital TV and multichannel mini-component systems with 150 crete channel. Two TAS3103 devices can gluelessly provide a com-
watts per channel require a highly efficient and space-saving plete post processing solution for 5.1 channel systems, including
bass management, delay, loudness, compression and limiting.
• TPA6110A2
Analog Stereo Digital
Tape MUX ADC Audio PWM Stereo
(Optional) Processor Modulator Power Stage
• PCM1801
• PCM1802 • TAS3103 • TAS5010 • TAS5112
• PCM1803
Lineout
Subwoofer DAC
CD/DVD
• PCM1725
USB USB
• TPS2110
DAC/Codec
• PCM2702
• PCM2901
Ô
Shelf Systems/Minicompo
Digital Audio Processor Stereo Audio DACs and Codecs
TAS3103 with USB Interface
PCM270x and PCM290x
Get datasheets and app reports at: www.ti.com/sc/device/TAS3103
Get datasheets and app reports at: www.ti.com/sc/device/PARTNUMBER
The TAS3103 is a cost-effective, three-channel, 48-bit (Replace PARTNUMBER with PCM2704, PCM2705, PCM2706, PCM2707 or
digital audio processor with a 76-bit accumulator PCM2900)
providing 540 MIPS of audio processing. It supports
sample rates from 8 to 96 kHz, and two ICs can be used for a The PCM270x family of single-chip USB stereo audio DACs and the
six-channel application gluelessly. PCM290x family of single-chip USB stereo audio codecs both feature a
USB compliant full-speed protocol controller and S/PDIF. These devices
Key Features
also employ SpAct™ architecture, TI’s unique system that recovers the
• Eight input channels
audio clock from USB packet data. On-chip analog PLLs with SpAct
• Three channels independently processed
enable playback with low clock jitter.
• Input/output crossbar mixer
• Channel mapping Key Features
• 3-D effects block • On-chip USB interface
• BBE, Qsound, SRS, etc. • 16-bit delta-sigma stereo
• Full bass management • Sampling rate:
• High-performance soft-volume, treble/bass • DAC: 32 to 48 kHz
• High-performance compression/limiting • ADC: 8 to 48 kHz
• 42-ms delay • On-chip clock generator with single 12-MHz clock source
• 12 bi-quads per channel • Package: 28-pin SSOP, Pb-free
• Easy-to-use PC GUI controls
Applications
Applications • USB audio speakers
• Mini/micro component systems • Audio interface boxes
• Home theater post-decode processing
VCCP VCCL VCCR VDD PGND AGNDL AGNDR DGND ZGND
• Automotive headunits/amps
Power
Manager SSPND
5-V to 3.3-V
PLL, Oscillator, Voltage Spectrum Voltage Regulator VBUS
Controller
Clocking Circuitry Regulation Analyzer VCOM USB
Analog Protocol
VOUTL Controller
Ch 1 PLL
Channel DAC
USB BIE
SDIN1 SDOUT1 D+
XCVR
Processing Block VOUTR Control
8-Ch Endpoint
I2S D–
8-Ch 3D Ch 2 12 Cascaded
SDIN2 Biquad per Ch Output
I2S Effects SDOUT2
Input Tone Control with S/PDIF
Block Crossbar DOUT
SDIN3 Loudness Encoder
DRC/Expander Mixer
Ch 3 Delay
SDIN4 Dither SDOUT3
EEPROM CK
ISO-Out Interface DT
FIFO
Endpoint HOST
TAS3103 Block Diagram
HIO SPI HIDO/NS
PSEL Endpoint Interface HID1/NC
HID2/ND
TEST0
TEST1
96
MHz Tracker
PLL (x8)
(SpAct™)
Ô To Know More Efficient Class-D audio power amplifiers solve two main problems
with higher power audio in flat-panel displays: heat and power
For detailed information about TI products:
consumption.
TPA3001D1: 20-W Mono Class-D Audio Amplifier 17
TPA3008D2 and TPA3005D2: 10-W Stereo Class-D Audio Amps 17 The low heat dissipation eliminates the need for large heat sinks.
TPA6110A2: Stereo Headphone Amplifier 18 The low power consumption helps reduce the AC/DC power
supply size and cost. Together, these benefits help keep the flat-
TPA3004D2 and TPA3002D2: 12-W Stereo Class-D Audio Amps 18
panel display as thin and light as possible.
TPA2008D2: 3-W Stereo Class-D Audio Amplifier 19
TPA6030A4: 3-W Stereo Class-AB Audio Amplifier 19
TPA6011A4: 3-W Stereo Class-AB Audio Amplifier 20
TPA4411: Cap-Free Stereo Headphone Amplifier 20
TAS5504: I2S to PWM Processor – 4 Channel 21
TAS5122: 30-W Digital Amplifier Power Stage 21
TAS3004: Digital Audio Processor with Codec 22
LM317M: 3-Terminal Adjustable Regulator 22
SN74AVCXT245 and SN74LVCXT245:
Dual-Supply Level Translators 23
Tuner
Class-D 3 W to
Analog
Audio Analog
Audio Baseband Audio 20 W
Processor
Processor TAS3004 Amplifier
TPA3000D
Power Management
LM317M
TI Products Headphone
Driver
TPA6110A2
Audio Signal Path for LCD TV and Multifunction Monitors
Tuner
Audio Class-D
Audio Baseband I2S PWM Audio 30 W
Processor
Processor TAS5504 Amplifier
TAS5122
Power Management
TI Products
LM317M
Ô
LCD TVs, Multifunction Monitors and Plasma-Display TVs
20-W Mono Class-D Audio Amplifier 10-W Stereo Class-D Audio Amplifiers
TPA3001D1 TPA3008D2 and TPA3005D2
Get samples, datasheets, evaluation modules and app reports at: Get samples, datasheets, evaluation modules and app reports at:
www.ti.com/sc/device/TPA3001D1 www.ti.com/sc/device/TPA3008D2 and
www.ti.com/sc/device/TPA3005D2
The TPA3001D1 is an analog-input Class-D audio power amplifier that
will drive 20 W mono into 8-Ω speakers without a heat sink or large The TPA3008D2 and TPA3005D2 are analog-input Class-D audio power
output filter components. amplifiers that drive 10 W stereo and 6 W stereo, respectively, into
speakers without a heat sink or large output filter components. The
Key Features
TPA3008D2 features an auto recovery that restarts the device after a
• 20 W mono into 8 Ω from 18 V at 10% THD+N
short-circuit condition is removed.
• Filter-free modulation
• Filter not required for efficiency or audio quality, but a low-cost Key Features
ferrite bead will reduce EMI • TPA3008D2: 10 W stereo into 16 Ω from 17 V at 10% THD+N
• Improved efficiency • TPA3005D2: 6 W stereo into 8 Ω from 12 V at 10% THD+N
• Improved SNR: 102 dB • Filter-free modulation
• Full short-circuit and thermal protection • Filter not required for efficiency or audio quality, but a low-cost
• Integrated gain settings ferrite bead will reduce EMI
• Low supply current: 8 mA from 12 V • Improved efficiency: 92% maximum
• Improved SNR: 97 dB
Applications
• Integrated gain settings
• Plasma displays
• Auto recovery (TPA3008D2)
• Large screen LCD TVs
• Stereo TPA3000D amplifiers pin compatible
TPA3001D1 Applications
VCC
IN–
C1 0.47 µF1 INN VCC 24
• LCD TVs 17” to 23”
C4
IN+
2
INP VREF 23 C3 1 µF
C2 0.47 µF 3 22 1 µF C11
GAIN SELECT GAIN0 BYPASS
4 21 C12 1 µF
GAIN SELECT GAIN1 COSC
5 SHUTDOWN 20 220 pF R1 PVCC 10 µF 10 µF PVCC
SHUTDOWN ROSC
CONTROL 6 PGND 19 120 kΩ 220 nF 220 nF
AGND 0.1 µF 0.1 µF
7 VCLAMP 18
AGND
C10 R2 8 17 R3
1 µF C8 BSN BSP C9
0.22 µF 51 Ω 9 16 51 Ω 0.22 µF
ROUTN
ROUTN
PGNDR
PGNDR
VCC PVCC
BSRN
PVCCR
PVCCR
PVCC VCC
BSRP
ROUTP
ROUTP
PVCCR
PVCCR
10 OUTN 15 Shutdown/Mute 1µF
C7 C5 OUTP C6 Control SHUTDOWN VCLAMPR
10 µF 1 µF 11 14 1 µF Right RINN NC
OUTN OUTP 0.47 µF
Differential RINP NC AVCC
12 13 Inputs
PGND PGND 0.47 µF V2P5 AVCC
D2 D1 Left 0.47 µF
PowerPAD™ Differential LINP NC
Inputs 0.47 µF LINN NC 0.1 µF 10 µF
0.47 µF
AVDDREF TPA3008D2 AGND
L2 L1 NC AVDD
(Ferrite (Ferrite GAIN0 COSC 1 µF
Gain 220 pF
Bead) Bead) Control GAIN1 ROSC
FAULT AGND 120 kΩ
NC VCLAMPL
PGNDL
PGNDL
LOUTN
LOUTN
LOUTP
LOUTP
PVCCL
PVCCL
PVCCL
PVCCL
C15 C14
BSLN
BSLP
1 nF 1 nF 1µF
0.1 µF 0.1 µF
10 µF 10 µF
220 nF 220 nF
TPA3001D1 Typical Application Circuit PVCC PVCC
* * Optional output filter
for EMI suppression
Get samples, datasheets, evaluation modules and app reports at: Get samples, datasheets, evaluation modules and app reports at:
www.ti.com/sc/device/TPA6110A2 www.ti.com/sc/device/TPA3004D2 and
www.ti.com/sc/device/TPA3002D2
The TPA6110A2 is a stereo headphone driver designed to connect
directly to the TPA3004D2 or TPA3002D2 with minimal external com- The TPA3004D2 and TPA3002D2 are analog-input Class-D audio
ponents. The integrated depop circuitry nulls “pops” and “clicks” dur- power amplifiers that will drive 12 W stereo and 9 W stereo, respec-
ing startup and shutdown transitions. tively, into 8-Ω speakers without a heat sink or large output filter
components. Integrated DC volume control and pre-outs for stereo
Key Features
headphone drive make these two amplifiers extremely versatile.
• 150 mW stereo into 16 Ω from 4.5 V with < 0.1% THD+N
• Full short-circuit and thermal protection Key Features
• Excellent depop circuitry • TPA3004D2: 12 W stereo into 8 Ω from 15 V at 10% THD+N
• Low supply current: 1.5 mA from 5 V • TPA3002D2: 9 W stereo into 8 Ω from 12 V at 10% THD+N
• Filter-free modulation
Applications
• Filter not required for efficiency or audio quality, but a low-cost
• Large screen multifunction monitors and LCD TVs
ferrite bead will reduce EMI
• Portable DVD players
• Improved efficiency
• Improved SNR: 102 dB (TPA3004D2)
ROUT+
ROUT
GND
VCC
VCC
ROUT2 1 kΩ
BSRN
PVCCR
PVCCR
ROUTN
ROUTN
PGNDR
PGNDR
ROUTP
ROUTP
PVCCR
BSRP
PVCCR
COUT2 220µF
C7 1 µF ROUT1 1 kΩ
SHUTDOWN SD VCLAMPR COUT1 220 µF
C1 1 µF
RIN RINN MODE_OUT Rhpf1
C2 1 µF CIN1 Rhps1 10 kΩ
RINP MODE
AVCC
C5 1 µF C13 C16 1 µF
AGND V2P5 AVCC 0.1µF 10 µF
10 kΩ TPA6110A2
C3 1 µF CVCC BYP IN1
LINP VAROUTR CIN2 (T4)
C4 1 µF 0.47µF GND Vo1
LIN LINN VAROUTL AVDD
AVDDREF TPA3004D2 FADE 1µF Rhps2
SD VDD
AVDD C14 IN2 Vo2
VREF AVDD (T3)
P3 T7 C6 100 nF 10 kΩ
Rhpf2
VARDIFF COSC
50 kΩ P2 T6 220 pF R1
VARMAX ROSC 10 kΩ
50 kΩ P1 T5 120 kΩ 10 µF
50 kΩ
VOLUME AGND
C8
REFGND VCLAMPL
PGNDL
PGNDL
LOUTN
LOUTN
GND
LOUTP
LOUTP
PVCCL
PVCCL
PVCCL
PVCCL
BSLN
BSLP
1 µF
PGND
AGND
C11 C12
C20 C21
0.1µF 0.1µF
C17
10 nF 10 nF
10 µF
PGND
L3 L4
(Bead) (Bead)
GND
LOUT
LOUT+
VCC
Ô
LCD TVs, Multifunction Monitors and Plasma-Display TVs
3-W Stereo Class-D Audio Amplifier 3-W Stereo Class-AB Audio Amplifier
TPA2008D2 TPA6030A4
Get samples, datasheets, evaluation modules and app reports at: Get samples, datasheets, evaluation modules and app reports at:
www.ti.com/sc/device/TPA2008D2 www.ti.com/sc/device/TPA6030A4
The TPA2008D2 is an analog-input Class-D audio power amplifier The TPA6030A4 is a fully integrated stereo speaker, stereo headphone
that will drive 3 W stereo into 3-Ω speakers without a heat sink and DC volume control audio solution. Features like integrated
or large output filter components. The output power level and depop circuitry that nulls “pops” and “clicks” during startup and
integrated DC volume control are ideal for multifunction monitors shutdown transitions and 12-V operation make the TPA6030A4 ideal
(MFMs). for multifunction monitors (MFMs).
Get samples, datasheets, evaluation modules and app reports at: Get samples, datasheets, evaluation modules and app reports at:
www.ti.com/sc/device/TPA6011A4 www.ti.com/sc/device/TPA4411
The TPA6011A4 is similar to the TPA6030A4 in functionality, but The TPA4411 is a stereo headphone driver that eliminates the need for
operates from a 5.5-V supply instead of a 12-V supply. Robust output large (often expensive) output capacitors required by other headphone
power, integrated stereo headphone drive and DC volume control amplifiers to block DC voltages.
make the TPA6011A4 well suited for multifunction monitor (MFM)
Key Features
applications.
• 80 mW stereo into 16 Ω from 4.5 V with < 1% THD+N
Key Features • Ground referenced outputs
• 3 W stereo into 3 Ω from 5.5 V with 10% THD+N • Eliminates need for DC blocking capacitors
• DC volume control (i.e. cap-free operation)
• Integrated stereo headphone drive • Saves space and cost
• Input stereo MUX • Improves low frequency (i.e. bass) response
• Full short-circuit and thermal protection • Greatly reduces “pop” and “click” noise during startup and
shutdown transitions
Applications
• Full short-circuit and thermal protection
• Multifunction monitors
• Integrated gain set to 1.5 V/V
• LCD TVs
Applications
Right
TPA6011A4
Speaker • Multifunction monitors
VDD
CC
1 ROUT+ 24 • LCD TVs
PGND 23
SE/BTL
100 kΩ • Portable DVD players
2
CS ROUT–
22 • Cellular phones
HP/LINE 100 kΩ
3 1 kΩ
Power Supply PVDD
CI
Right HP 4 21 Shutdown
RHPIN VOLUME SDL PGND
Audio Source Cl Control
Right Line 5 20 In from DAC or SDR SGND
RLINEIN SEDIFF Potentiometer
Audio Source CI (DC Voltage)
6 19 TPA4411 OUTL
RIN SEMAX CI INR
VDD
CS OUTR
7 18 Headphones
VDD AGND CI INL
CI C(BYP) PVSS
8 17 SVSS
LIN BYPASS 1.8 - 4.5 V PVDD
CI 1 kΩ SV DD
CC C(BYP) C(VSS)
Left Line 9 16
Audio Source LLINEIN FADE C1P C1N
CI
Left HP 10
Audio Source
LHPIN SHUTDOWN 15 System
Control
11 14
Power Supply PVDD LOUT+ Left
12 13 Speaker TPA4411 Typical Application Circuit
CS LOUT– PGND
Ô
LCD TVs, Multifunction Monitors and Plasma-Display TVs
4-Channel I2S to PWM Processor 30-W Digital Amplifier Power Stage
TAS5504 TAS5122
Get samples, datasheets, evaluation modules and app reports at: Get samples, datasheets, evaluation modules and app reports at:
www.ti.com/sc/device/TAS5504 www.ti.com/sc/device/TAS5122
The TAS5504 is a four-channel digital pulse width The TAS5122 is a digital-input power stage designed
modulator that provides advanced performance and to drive 30 W into stereo speakers with no large
high level system integration. It is designed to inter- external heat sinks. The device incorporates TI’s
face seamlessly using four stereo serial audio inputs accepting a wide PurePath Digital™ technology and is used in conjunction with a digital
range of formats. audio PWM processor and a simple passive demodulation filter to
deliver high-quality, high-efficiency, true-digital audio amplification.
Key Features
• 4-channel digital audio PWM processor Key Features
• I2S inputs • 30 W stereo into 6 Ω from 23 V with < 0.4% THD+N
• PWM output • Greater than 90% efficient
• Supply voltage: 3.3 V • 95 dB maximum dynamic range
• Inputs are 5-V tolerant • Full short-circuit, under-voltage and thermal protection with
• High-performance digital audio (DAP) reporting
• 48-bit audio processing
Applications
• Dynamic range: > 102 dB
• Plasma TVs
• Sampling rates: 32 to 192 kHz
BST_B PVDD_B
• Two bass and treble tone controls BST_A PVDD_A
Applications
OCH
• Plasma TVs
RCV
BP
AP Dead OUT_B
Power Supply PWM G Time OUT_A
Processor BM D Control Bootstrap
SP C
MCLK Gate Drive
Headphone
XTL_OUT
XTL_IN PWM
Data
...
OCL PVSS
SCLK and
8 x 4 Crossbar Mixer
PVSS
4 x 2 Crossbar Mixer
OCL PVSS
PVSS
BST_C BST_D
Get samples, datasheets, evaluation modules and app reports at: Get samples, datasheets, evaluation modules and app reports at:
www.ti.com/sc/device/TAS3004 www.ti.com/sc/device/LM317M
The TAS3004 device is a system-on-a-chip that The LM317M is an adjustable 3-terminal positive-voltage regulator
replaces conventional analog equalization to perform capable of supplying more than 500 mA over an output-voltage range
digital parametric equalization, dynamic range of 1.25 V to 37 V. The LM317M is exceptionally easy to use and
compression and loudness contour. This device also provides high- requires only two external resistors to set the output voltage. Both
quality, soft digital volume, bass and treble control. line and load regulation are better than standard fixed regulators.
VRFILT
VREFP
AVDD
DVDD
DVSS
AVSS
AINRP
Input Output
AINRM Voltage Analog Digital VI LM317M VO
RINA Reference Supplies Supplies
RINB
Analog
R1 D2
AINRP Adjust 240 Ω 1N4002
Control
Register I Adj
VREF = 1.25 V
AINRM Ci CO
Output 0.1 µF 1.0 µF
24-Bit Format SDOUT0
AINLP
Stereo Control
AINLM ADC
LINA
Logic
AINLP R2 CADJ
LINB
AINLM
ALLPASS VCOM
INPA AOUTL
Controller
GPI5
AOUTR
LM317M Typical Application Circuit
GPI4
GPI3
24-Bit
GPI2 Stereo DAC
GPI1
GPI0
L+R L+R
SDOUT2
Control
CS1
32-Bit Audio Signal
I 2C
SDA Processor
SCL
SDOUT1
Control
CLKSEL
CAP_PLL
IFM/S
SCLK/O
XTALI/
MCLK
XTALO
MCLKO
LRCLK/O
Ô
LCD TVs, Multifunction Monitors and Plasma-Display TVs
Dual-Supply Level Translators
SN74AVCXT245 and SN74LVCXT245
Get samples, datasheets and app reports at: www.ti.com/trans GET TO MARKET FASTER
Dual-supply level shifters are the ideal solution for bidirectional level
translation. These devices have two separate VCC supplies, one for
each port (VCCA and VCCB), which gives them flexibility to operate in
mixed-mode applications. These dual-supply devices allow for
bidirectional level translation between different voltage nodes from
1.2 V to 3.6 V and 1.65 V to 5.5 V. TI also offers a wide range of
bit-width options.
LVC1T45
LVC2T45
LVC16T245
LVC8T245
AVC2T45
AVC4T245
AVC8T245
AVC16T245
AVC20T245
AVC24T245
AVC32T245
3.3
3 training information and development tools
2.5 at your fingertips with our free resource CD.
2 Also available is a Digital Media CD targeted
1.8
1.5 specifically for Video and Imaging innovations.
1.2
1
0.8
NEW RESOURCE CDs AVAILABLE
0 Audio Solutions Resource CD, to order visit:
1 2 4 8 16 20 24 32
Bit Width www.ti.com/tiaudio
Digital Media Resource CD, to order visit:
Extended Family of Dual-Supply Level-Translation Devices
www.ti.com/tivideo
VCCA* VCCB *
Dual-Supply I/O
ASIC Level Device
Translator
Ô
The portable audio device space has grown significantly in recent
To Know More
years, due not only to the explosion of conventional audio and
For detailed information about TI products: multimedia playback devices, but also to the integration of audio
TLV320AIC32 and TLV320AIC33: Low-Power, functionality into equipment that in the past had no audio capability.
Highly Integrated Stereo Audio Codecs 26 Not only are flash-memory and hard-disk based audio players quite
TLV320AIC26 and TLV320DAC26: High-Performance, common in stores today, but now audio functions are easily found in
Low-Power Audio Converters 26 cell phones, PDAs, digital video camcorders, digital still cameras,
TLV320AIC28: Low-Power Audio Codec for Portable Applications 27 Bluetooth® and 802.11 wireless headsets, and even portable language
translators. The electrical components used in these systems also
TLV320AIC23B: Low-Power Stereo Audio Codec 27
vary dramatically, including audio ADCs and DACs for conversion
TS5A23157: Dual-SPDT 5-V Analog Switch 28 between analog and digital, headphone/speaker amplifiers for driving
TS5A3159: 1-Ω Single-Pole/Double-Throw Analog Switch 28 earpieces, headphones or built-in speakers, programmable DSPs
TSB43AA82 and TSB43AA82A: 2-Port, Integrated PHY for encoding/decoding compressed data in such formats as MP3,
and Link-Layer Chip for PC Peripherals 29 WMA or AAC, microcontrollers for handling system-level control
TUSB6250: Low-Power USB 2.0-to-ATA Bridge Solution 29 and user interface functions, and wireless transceivers for
transmission/reception of data over RF. TI offers a broad portfolio
PCM2910: Audio Codec with USB Interface, Mono
Microphone Input and Stereo Headphone Output 30 of products focused directly at portable audio equipment, with
particular focus on low-power operation, since the one common
PCM177x: Low-Voltage, Low-Power Stereo DACs 30
factor among virtually all such systems is their dependence on
Other TI Products for This Market: battery power for operation.
TPA4411: Cap-Free Stereo Headphone Amplifier 20
Stereo
Headphones TI DSP
Mono Speaker USB USB
I2S
Audio McBSP
Codec
Microphone Power
Management
Smart Card
Stereo Audio McBSP MMC/SD MMC SD See Portable Power
Subsystem on p. 25
Line-In FM In
LED Keypad
Antenna
IrDA
Peripheral Interface
802.11 Antenna
Plug Controller
Controller Reset Power
Color Display
Management
LCD Data/Timing
Control See Portable Power
Subsystem on p. 25
Source Drivers
Personal Digital Assistant (PDA) System Block Diagram
Below is a subsystem block diagram that is applicable for most the page includes additional specifications for these ICs, as well as
portable applications. Recommended TI ICs for each power manage- alternative ICs within each power function category. To access TI’s
ment function are shown in the diagram. The table at the bottom of complete power management portfolio, go to power.ti.com
bq27000: bq24030:
I2C High-Accuracy Charger with
Fuel Gauge with I2C Power Path Management
Low-Power, Highly Integrated Stereo Audio Codecs High-Performance, Low-Power Audio Converters
TLV320AIC32 and TLV320AIC33 TLV320AIC26 and TLV320DAC26
Applications Applications
• Cellular and smart phones • Digital still cameras, digital video cameras
• Digital still cameras, digital video cameras • MP3 and portable media players
• MP3 and portable media players • PDAs
• PDAs DRVDD DRVSS AVDD AVSS DVDD DVSS IOVDD
HPL DAC
AVSS_ADC
AVSS_DAC
DRVDD
DRVDD
DRVSS
DRVSS
IOVDD
WCLK
DVDD
DOUT
DVSS
BCLK
Low Power
DIN
High Power
Digital
HPR DAC Filters
Audio Serial
Voltage Supplies Bus Low Power
HPL+ Digital
VGND Bass,
Midrange,
MIC2/LINE2L+ HPL-/HPLCOM 2.0V/2.5V Treble,
MIC2/LINE2L- MICBIAS EQ
0 to 59.5 dB Processing
MIC 3/LINE3L HPR-/HPRCOM/ MICIN (0.5 dB steps)
SPKFC M
PGA Mixing,
ADC Volume C tl U ADC
MIC1/LINE1L+ 59.5dB
0/+
& Effects DAC Muxing,
MIC1/LINE1L- Mixing, 0.5dB steps X
Volume HPR+
Muxing AG C
MIC1 /LINE1R+ PGA
Volume C tl
Controls
MIC1 /LINE1R- 0/+59.5dB ADC & Effects DAC
0.5dB steps MONO_OUT+
MONO_OUT- \PWD/
MIC3/LINE3R ADWS
Digital Audio
LINE_OUT_R+ AUX Serial
LRCK
MIC2/LINE2R+ Interface
MIC2/LINE2R- LINE_OUT_R-
Battery BCLK
VBAT1 Monitor DIN
LINE_OUT_L+
LINE_OUT_L- Battery M DOUT
VBAT2
Monitor U SAR /SS
SPI Serial
Bias/ Audio C lock SPI / I2C Serial Control
Reference Generation Bus Temperature X ADC Interface SCLK
and MOSI
Measurement
Data MISO
Processing
/DAV
GPIO_1
GPIO_2
MICDET
MICBIAS
MCLK
RE SETB
SELEC T
CSEL/I2C_ADR0
SCLK/I2C_ADR1
MOSI/GPIO
MISO/GPIO
SCL/GPIO
SDA/GPIO
/RESET
1.25-V/2.5-V
TLV320AIC33 Block Diagram VREF Voltage
OSC
Reference
Low-Power Audio Codec for Portable Applications Low-Power Stereo Audio Codec
TLV320AIC28 TLV320AIC23B
Get samples, datasheets, evaluation modules and app reports at: Get samples, datasheets, evaluation modules and app reports at:
www.ti.com/sc/device/TLV320AIC28 www.ti.com/sc/device/TLV320AIC23B
The TLV320AIC28 is a low-power, highly integrated audio codec with The TLV320AIC23B high-performance, low-power
integrated stereo headphone amplifier, 8-Ω speaker amplifier and stereo audio codec with highly integrated
12-bit battery/temperature/auxiliary measurement ADC. functionality allows many features to fit into a small
area with minimal power consumption.
Key Features
• Stereo audio DAC and mono audio ADC support rates up to 53 ksps Key Features
• Stereo headphone drivers with support for capless output • Very low-power dissipation: 23 mW in playback mode
configuration • 90-dB SNR ADC, 100-dB SNR DAC
• 400-mW, 8-Ω speaker amplifier with separate supply for direct • Integrated headphone amplifier: 40 mW into 16 Ω
Li-Ion/polymer battery connection • I2C or SPI protocol for control
• Six analog inputs, five output drivers for easy connectivity to stereo • Microphone input with side-tone mixer
or cellular headsets as well as cellular analog baseband processors • Maximum sample rate of 96 kHz
• Microphone bias, preamp and hardware automatic gain control • Bypass mode enables an all-analog path
• Integrated PLL for flexible audio clock generation • Package: small 25 mm2 MicroStar BGA™ or RHD or TSSOP
• Programmable digital audio bass/treble/EQ/de-emphasis
Applications
• Direct battery measurement accepts up to 6-V input
• Multifunction internet audio players (portable audio players,
• On-chip temperature and auxiliary input measurement
cell phones, PDAs, digital cameras, etc.)
Applications • Portable CD players
• Cellular smart phones • Portable jukeboxes
• Personal digital assistants (PDAs) • Portable radios and boom boxes
Divider LRCIN
XTI/MCLK
TLV320AIC28 Block Diagram OSC (2x, 1/2x) DIN
XTO Digital
Audio LRCOUT
CLKOUT Divider
(1/2 X) DOUT
BCLK
GND 3 TS5A23157 8 V+
TS5A3159
NO2 4 7 NC2
IN2 5 6 COM2
TS5A3159 Package and Functional Diagram
2-Port, Integrated PHY and Link-Layer Chip Low-Power USB 2.0-to-ATA Bridge Solution
for 1394 PC Peripherals TUSB6250
TSB43AA82 and TSB43AA82A
Get datasheets and app reports at:
Get datasheets at: www.ti.com/1394 www.ti.com/sc/device/TUSB6250
The TSB43AA82 integrated PHY and link-layer controller supports The TUSB6250 bridge for USB 2.0-compliant PC storage peripheral
asynchronous transfers, providing a 1394 connectivity solution for products provides world-class throughput, enhancing the read/write
high-capacity digital audio players (DAPs). This high-speed, 400-Mbps performance of high-density storage media. A highly programmable
connection allows you to incorporate capacity in your DAP without and configurable architecture allows you to make use of a wide
sacrificing small form factor. Players like the Apple iPOD® DAP use a variety of off-the-shelf ATA/ATAPI devices. Industry-leading low power
1.8-inch hard disk drive as the storage medium for songs and data. consumption — just 80 mA at 3.3 V — makes cable-powered drives a
The TSB43AA82 will provide the high-speed link to the computer reality. For self-powered drives, the TUSB6250’s low power consump-
needed to load a large number of songs in a reasonable timeframe. tion provides sufficient leftover power to recharge an onboard battery.
A generic 8-/16-bit host bus interface supports parallel, multiplexed Applications include hard disk drives, as well as PC peripherals that
connections to the microcontroller at rates up to 40 MHz. use HDDs as their storage media (e.g. digital audio players and
personal video recorders).
Key Features
• IEEE 1394a-2000 compliant Key Features
• Single 3.3-V supply • Low active power: 80 mA at 3.3 V (typ)
• Internal 1.8-V circuit reduces power consumption • Ultra-low standby power: 200 mA at 3.3 V
• Integrated 400 Mbps, 2-port PHY • Single 3.3-V supply operation with integrated 1.8-V regulator
• Internal voltage regulator
• IEEE 1394 related functions: Applications
• Automated read response for ConfigROM register access
• Hard disk drives (HDDs)
• Automated single retry protocol and split transaction control
• Zip drives
• CD-RW
Applications • DVDs
• High-capacity digital audio players • Magneto-optical (MO) drives
• PC and Mac peripherals • Flash card readers
• USB 2.0-based digital audio players
Configuration Register (CFR)
ATA/ATAPI
Config Auto Fast ORB
Bus
ROM Response Exchanger (FOX)
MRF
Port 2
CRF
Firmware
BDFIFO Link
Storage in
EEPROM
Log
Core
1394a
DTF Packetizer
DMA
8/16 Bulky
I/F
Packet
Distributor
DRF
Audio Codec with USB Interface, Mono Low-Voltage, Low-Power Stereo DACs
Microphone Input and Stereo Headphone Output PCM177x
PCM2910
Get samples, datasheets, evaluation modules and app reports at:
The PCM2910 is TI’s single-chip USB stereo audio www.ti.com/sc/device/PARTNUMBER
PREVIEW * codec with USB 2.0-compliant full-speed protocol (Replace PARTNUMBER in URL with PCM1770, PCM1771,
controller and analog front end (AFE) function for headset application. PCM1772 or PCM1773)
The USB protocol controller works with no software code, but USB
descriptors can be modified upon request. The PCM2910 employs The PCM1770/1771 provide headphone drive while the PCM1772/1773
SpAct™ architecture, TI’s unique system that recovers the audio provide line output drive. The PCM1771/1773 are configured using
clock from USB packet data. On-chip analog PLLs with SpAct enable hardware pins, while the PCM1770/1772 include a three-line software
independent play back and record sampling rate with low clock jitter. control port.
Power
Applications
5 V to 3.3 V Manager SSPND
V REF Voltage • Multifunction internet audio players (portable audio players,
Regulator
VBUS
MIC PGA +30 dB
cell phones, PDAs, digital cameras, etc.)
MBIAS to –12 dB D+
BIAS in 1 dB Steps XCVR
D–
• Portable CD players
FIFO ISO-In
VIN
MIC
DAC
Selector
Endpoint • Portable jukeboxes
AMP USB
SIE • Portable radios and boom boxes
Analog Control POWER
VCOM2 Endpoint
PLL MAMP
VCOM1 MMUTE AIN
ATT 0 dB to -76 dB Analog
in 1 dB Steps PLL
with Mute Digital
Attenuator
VOUTL Selector PLAY LRCK
DAC X8
ISO-Out REC Audio
VOUTR FIFO
Endpoint Data Interface
Digital ∆∑
DAC
+ HOUTR
Filter
HF AMP 15 mW (@32 Ω) BCK
ATT 0 dB to -76 dB USB-Protocol TEST0
in 1 dB Steps with Mute VCOM VCOM
Controller TEST1
FL (FMT) MS
FR X8
SPI ∆∑
96 MHz Tracker
(AMIX) MC Port
Digital
Filter DAC + HOUTL
PLL (x16)
(SpAct™) (DEMP) MD
Power Supply
PCM2910 Block Diagram
SCKI
PD AGND HGND VCC VHP
Portable DVD Players
DVD
Drive Audio
MPEG4 Audio
& Data Converter
AC-3 Audio Power
Program TLV320AIC23B
TLV320AIC23B
DECODER
Decoder Amplifier
Stream TLV320AIC32/33
TPA6011A4
Demux
Battery Charger
bq2410x Power Management Power Management
bq2057W TPS54350 TPS5124
TI Products
Audio Signal Path for Portable DVD Players
C RIN–
Applications
Right 0.47 µF
17 RIN– ROUT+ 18 • Portable DVD players
Line
Input • Digital radios
Signal
– + • Notebook computers
+ –
C RIN+
0.47 µF 7 ROUT– 14
RIN+ Right
Speaker
PV DD
TPA6011A4 VDD
6,15 CC
V DD 1 ROUT+ 24
C SR PGND 23 100 kΩ
VDD 16 0.1 µF SE/BTL
2 GAIN0 VDD 2
Power CS ROUT–
Gain BYP ASS10 22 100 kΩ
Management C SR HP/LINE
Control SHUT- 3 1 kΩ
3 GAIN1 0.1 µF Power Supply PVDD
DOWN 19 C BYP CI
GND Right HP 4 21
To 0.47 µF RHPIN VOLUME
Audio Source CI
System In from DAC or
C LIN– Right Line 5 20
Control RLINEIN SEDIFF Potentiometer
Left Audio Source CI
0.47 µF (DC Voltage)
Line LOUT+ 4 6 19
5 LIN– 1,11, RIN SEMAX
Input
13,20 VDD
Signal CS
7 18 Headphones
+ VDD AGND
– CI C(BYP)
C LIN+ + 8 17
– LIN BYPASS
Left 0.47 µF 1 kΩ
Line 9 LIN+ LOUT– 8 CI CC
Left Line 9 16
Input LLINEIN FADE
Audio Source CI
Signal
Left HP 10
Audio Source
LHPIN SHUTDOWN 15 System
Control
11 14
Power Supply PVDD LOUT+ Left
TPA6017A2 Block Diagram CS
12 13 Speaker
LOUT– PGND
Ô
Portable DVD Players
General-Purpose, Dual-Channel Synchronous 4.5-V to 20-V Input, 3-A Step-Down Converter
Buck DC/DC Controller TPS5435x
TPS5124
Get samples, datasheets, evaluation modules, app reports and software tools
Get samples, datasheets, evaluation modules and app reports at: at: www.ti.com/sc/device/TPS54350
www.ti.com/sc/device/TPS5124
The TPS5435x family of synchronous buck PWM converters features
The TPS5124 is a dual independent high-efficiency synchronous
a high-performance voltage error amplifier that enables maximum
step-down controller. It supports low-voltage/high-current power
performance under transient conditions allowing flexibility in choosing
supply applications that use either 5-V or 12-V bus voltage. Since
output filter inductors and capacitors. Other features include an
both controllers operate 180 degrees out-of-phase, the input current
under-voltage-lockout circuit to prevent start-up until the input voltage
ripple is minimized resulting in a smaller input capacitance and
reaches 4.5 V, an internal slow-start circuit to limit in-rush currents
reduced power supply cost.
and a power good output to indicate valid output conditions. The
Key Features synchronization feature is configurable as either input or output for
• Input voltage range 4.5 to 15 V and 6.5 to 15 V easy 180° out of phase synchronization.
• High efficiency—no current sense resistor required, RDS(on)
Key Features
over-current detection with temperature compensation
• Input voltage range: 4.5 to 20 V
• Adjustable output voltage down to 0.9 V
• 4.5-A peak MOSFET switch for high efficiency at 3-A continuous
• Voltage-mode PWM control: Maximum 500-kHz operation
output current
• 180° out-of-phase control
• Uses external low-side MOSFET or diode
• Individual standby and soft-start for each channel—easy power
• Output voltage adjustable down to 0.9 V with 1% accuracy
sequencing
• Wide PWM frequency – fixed 250 kHz, 500 kHz or adjustable
• Over-voltage and under-voltage protection
250 to 700 kHz
• Built-in bootstrap diode
• Load protected by peak current limit and thermal shutdown
• Built-in 5-V linear regulator
• Internal slow start
• Accurate ±1% 0.85-V reference
• Adjustable under-voltage lockout
• Package: 30-pin TSSOP (DBT)
• Synchronizes to external clock
Applications • Package: 16-pin PowerPAD™ TSSOP
• Portable DVD players
Applications
• Consumer game systems
• Portable DVD players
• Digital set-top boxes
• Computer peripherals
• VGA and sound boxes
V IN TPS54356
4.5 V to 20 V 3.3 V
24
VIN PH
VCC
TPS5124 VBIAS BOOT
2 FB1 FB2 14
LSG
30 LH1 LH2 16 ENA
PG
29 OUT1_U OUT2_U 17 PGND
V OUT1 28 LL1 LL2 18 V OUT2
(5 V) (3.3 V) VSENSE
27 OUT1_D OUT2_D 19
Power-efficient Class-D audio power amplifiers solve two main
To Know More
problems within modern cell phones with integrated audio
For detailed information about TI products: functionality: heat dissipation and power consumption. Lower heat
TPA6203A1: 630-mW Mono Class-AB Audio Amplifier 35 dissipation means more power can be delivered to the speaker.
TPA6204A1: 720-mW Mono Class-AB Audio Amplifier 35 The lower power consumption prolongs battery life. Together, these
two benefits allow more sound and longer talk time in the cell phone.
TPA6211A1: 1.2-W Mono Class-AB Audio Amplifier 36
TPA2005D1: 580-mW Mono Class-D Audio Amplifier 36
TPA2010D1: 1.1-mW Mono Class-D Audio Amplifier 37
TPA2012D2: 2.1-W Stereo Class-D Audio Amplifier 37
Other TI Products for This Market:
TPA4411: Cap-Free Stereo Headphone Amplifier 20
TLV320AIC32 and TLV320AIC33: Low-Power, Highly
Integrated Stereo Audio Codecs 26
TLV320AIC26: High-Performance, Low-Power Audio Converters 26
TLV320AIC28: Low-Power Audio Codec for Portable Applications 27
TSC210x and TSC230x: Data Converter
(Codec Sub-section) Selection Guide 48
Audio Power
Antenna Volume Amplifier 80 mW
FM Tuner Control TPA4411
RF
Digital Analog
Baseband Receiver
Baseband Speaker
(DBB) (ABB)
Touch- Option 1
Screen (Hands-Free)
Controller
Ringer/
Handsfree
Option 2 Speakers
(Mono Polyphonic Ringer) Audio Power
Touch Amplifier (Mono/
Screen Stereo)
Class-AB
Class-D 400-700
Melody mW
IC
Power Option 3
Audio Power
(Stereo Polyphonic Ringer)
Management Amplifier
See Portable Power Class-AB
TI Products
Subsystem on p. 25 Class-D
Antenna
Receiver
Digital Analog Speaker
RF Baseband Baseband
(DBB) (ABB)
Ringer/
Handsfree
Speakers
Audio Power (Mono/
Application Audio Codec/ Amplifier Stereo)
Processor Touch-Screen Class-AB 400-700
(OMAP) Controller Class-D mW
TLV320AIC28
Power TLV320AIC33
Management FM Tuner
TSC2301 Audio Power
See Portable Power
TSC2101 Amplifier 80 mW
Subsystem on p. 25 Melody IC
TPA4411
TI Products
Touch
Screen
Audio Signal Path for Smart/Feature Phone
Ô
Wireless Handsets, Smart Phones and Feature Phones
630-mW Mono Class-AB Audio Amplifier 720-mW Mono Class-AB Audio Amplifier
TPA6203A1 TPA6204A1
Get samples, datasheets, evaluation modules and app reports at: Get samples, datasheets, evaluation modules and app reports at:
www.ti.com/sc/device/TPA6203A1 www.ti.com/sc/device/TPA6204A1
The TPA6203A1 is a mono Class-AB audio power amplifier that will The TPA6204A1 is a mono Class-AB audio power amplifier that will
drive 630 mW into an 8-Ω speaker at 3.6 V with only five external drive 720 mW into an 8-Ω speaker at 3.6 V with only three external
components. components.
VDD A3 VDD 6
RF To Battery To Battery
RI Cs 40 kΩ Cs
– C3 IN– VO + B3
– – RI 4 IN- VO + 5
In From –
DAC + RI C2 IN+
VO – A1 In From
+ DAC + RI 3 IN+
VO – 8
+
RF GND B2
40 kΩ GND 7
B1
SHUTDOWN Bias
C1 Circuitry 2
C(BYPASS)* Bias
1
SHUTDOWN Circuitry
C (BYPASS)*
* C (BYPASS) is optional 100 kΩ
Get samples, datasheets, evaluation modules and app reports at: Get samples, datasheets, evaluation modules and app reports at:
www.ti.com/sc/device/TPA6211A1 www.ti.com/sc/device/TPA2005D1
The TPA6211A1 is a mono Class-AB audio power amplifier that will The TPA2005D1 is a mono Class-D audio power amplifier that will
drive 1.2 W into a 3-Ω speaker at 3.6 V with only three external drive 580 mW into an 8-Ω speaker at 3.6 V with only three external
components. components.
Key Features Key Features
• 1.2 W mono into 3 Ω from 3.6 V at 1% THD+N • Efficient Class-D operation (84% at 400 mW)
• Low supply current: 4 mA • Full LC filter not required for efficiency or audio quality, but a
• Fully differential architecture low-cost ferrite bead filter will reduce EMI
• High PSRR: 85 dB • 580 mW mono into 8 Ω from 3.6 V at 1% THD+N
• High CMRR: 63 dB • Low supply current: 2.8 mA
• Package: 3 mm x 3 mm QFN package and 3 mm x 5 mm MSOP, • Fully differential architecture
Pb-free available • High PSRR: 75 dB
• High CMRR: 68 dB
Applications • Package: 2.5 mm x 2.5 mm BGA, 3 mm x 3 mm QFN and
• Wireless handsets 3 mm x 5 mm MSOP; Pb-free available
• Smart/feature phones
• PDAs Applications
• Laptop subwoofers • Wireless handsets
• Smart/feature phones
• PDAs
VDD 6
To Battery To
Battery
40 kΩ CS VDD
Internal
– RI 4 IN- VO+
Oscillator
5 CS
In From
– + RI IN-
+ RI VO– 8 VO +
DAC 3 IN+
+ – H-
Differential PWM
Input + Bridge
40 kΩ GND 7 –
RI IN+ VO –
1 GND
SHUTDOWN Bias Bias
Circuitry SHUTDOWN Circuitry
100 kΩ TPA2005D1
C(BYPASS)*
2
TPA2005D1 Block Diagram
* C (BYPASS) is optional
Wireless Handsets, Smart Phones and Feature Phones
1.1-W Mono Class-D Audio Amplifier 2.1-W Stereo Class-D Audio Amplifier
TPA2010D1 TPA2012D2
Get samples, datasheets, evaluation modules and app reports at: Get samples, datasheets, evaluation modules and app reports at:
www.ti.com/sc/device/TPA2010D1 www.ti.com/sc/device/TPA2012D2
The TPA2010D1 is a mono Class-D audio power amplifier that The TPA2012D2 is a stereo Class-D audio power amplifier that will
will drive 1.1 W into a 4-Ω speaker at 3.6 V with only three external drive 2.1 W into a 4-Ω speaker at 5 V with only two external
components. components.
Key Features Key Features
• Efficient Class-D operation (88% at 400 mW) • Efficient Class-D operation
• Full LC filter not required for efficiency or audio quality, but a • Full LC filter not required for efficiency or audio quality, but a
low-cost ferrite bead filter will reduce EMI low-cost ferrite bead filter will reduce EMI
• 1.1 W mono into 4 Ω from 3.6 V at 1% THD+N • 2.1 W per channel into 4 Ω from 5 V at 10% THD+N (QFN package)
• Low supply current: 2.8 mA • Low supply current: 6 mA
• Fully differential architecture • Fully differential architecture
• High PSRR: 75 dB • Four selectable gains: 6, 12, 18 and 24 dB
• High CMRR: 68 dB • High PSRR: 77 dB (at 217 Hz)
• Package: 1.45 mm x 1.45 mm WCSP, Pb-free available • High CMRR: 69 dB
• Package: 2 mm x 2 mm WCSP and 4 mm x 4 mm ThinQFN
Applications
(Both Pb-free)
• Wireless handsets
• Smart/feature phones Applications
• PDAs • Wireless handsets
• Smart/feature phones
To Battery
• PDAs
Internal VDD • Portable DVD players
Oscillator CS
RI
+ IN– To Battery
VO+ VDD
– H- CS
Differential PWM Bridge
Input + VO– INR+ OUTR+
RI
– IN+ Right Gain H-
Input Adjust PWM
Bridge
INR– OUTR–
GND
Bias
SHUTDOWN
Circuitry
Internal GND
Oscillator
TPA2010D1
G0
G1
SDR
300 kΩ Bias Gain
Circuitry G1 G0 V/V dB
0 0 2 6
SDL
0 1 4 12
300 kΩ 1 0 8 18
1 1 16 24
Ô
The professional audio market demands high-performance audio system
To Know More
solutions that are easy to use. For audio system designers, the design
For detailed information about TI products: requirements must be satisfied across the broad range of systems
TMS320C6713: Highest-Performance Floating-Point DSP that fall within the professional market segment — from the home
for High-Quality Audio Systems 39 recording equipment and electric instruments of part-time musicians
PGA2310/PGA2320 and PGA2311/PGA4311: to the high-quality audio and distribution infrastructure needed for
High-Performance Audio Volume Controls 39 sophisticated recording studios. As a result, designers of professional
PGA2500: First Digitally Controlled Microphone Preamplifier IC 40 audio equipment are best served by a comprehensive supplier of
PCM4202 and PCM4204: High-Performance, 24-Bit, high-performance and highly functional audio components that can
2- and 4-Channel Stereo Audio ADCs 40 be quickly designed into a wide variety of end equipments. Many of
TI’s advanced audio devices fulfill these requirements. For example,
PCM4201: Low-Power, Wide Dynamic Range, 24-Bit Audio
the TMS320C6713 DSPs are highly integrated 32-/64-bit floating-point
ADC for Wireless Mic/Portable Applications 41
devices that offer tremendous audio applications performance at good
PCM4104: High-Performance, 24-Bit, 192-kHz, 4-Channel
price points. Designers can access and harness the full performance
Audio DAC 41
and flexibility of this programmable DSP through TI’s industry-leading
PCM1792: Industry’s Highest-Performance Audio DAC 42 development tools, including Code Composer Studio™ a proven DSP
SRC419x and SRC4184: Highest-Performance integrated development environment (IDE), a real-time DSP/BIOS™
Sample Rate Converter ICs 42 kernel, a scalable real-time operating system, and an efficient
DIT4096 and DIT4192: Digital Audio Transmitters C compiler that quickly generates optimized code. Combined with TI’s
for Professional Studio Applications 43 advanced analog technology and high-quality audio conversion and
Other TI Products for This Market: processing products, these products provide a comprehensive tool kit
for the hard-pressed system designer.
TPA6120A2: See www.ti.com/sc/device/TPA6120A2
PCM1792/4
PCM4204 PCM1796/8 PGA2310
PCM4202 TMS320C6713 PCM1738/30 PGA2320
PCM4201 PCM4104 PGA2311
PGA2500 PCM1804 PCM4108 PGA4311
Analog Analog
Input PGA ADC TI DSP DAC PGA Output
SRC4192/3 DIT4096
SRC4194 DIT4192
SRC4190
SRC4184
Professional Audio Signal Chain
For the latest information on TI’s Professional Audio Solutions, visit www.ti.com/proaudio
SDRAM
ADC
Texas Instruments 1Q 2005 HPI Solutions Guide
Audio
DSP
ADC EMIF
Professional Audio 39
McASP 0
≈ MUX MUTE
McBSP 1 Level 2
Enhanced
OR
Cache/ C67x™
DMA
Memory DSP 8
ZCEN
IIC 1 Controller
256K Core 8
Serial CS
(EDMA)
Bytes AGNDL
Control
16 Ch. SCLK
SRAM AGNDR Port
HPI SDI
OR SDO
8
GPIO Level 1 8
Data
McASP 1 Cache
MUX
4K Bytes ≈
IIC 0
–
2 Timers VOUTR
VIN R +
Get samples, datasheets and evaluation modules at: Get samples, datasheets and evaluation modules at:
www.ti.com/sc/device/PGA2500 www.ti.com/sc/device/PCM4202 and www.ti.com/sc/device/PCM4204
The PGA2500 is a digitally controlled microphone preamplifier designed The PCM4204 is a high-performance stereo ADC designed for profes-
for use as an analog front end for high-performance audio analog-to- sional audio applications. It supports 24-bit linear PCM output data
digital converters. It features low noise and wide dynamic range in with sampling frequencies up to 216 kHz. It can also be configured to
addition to a fully differential I/O architecture and four programmable output either 64X or 128X oversampled one-bit direct stream digital
digital outputs for controlling external functions. The PGA2500 is an (DSD) data for both channels. The PCM4204 is also ideal for DVD-
ideal choice for a wide variety of microphone types. Audio and super audio compact disc (SACD) recording applications.
Key Features Key Features
• 0 dB, 10 to 65 dB in 1 dB steps • Dynamic range: 118 dB
• Fully differential I/O • THD+N: –105 dB
• Dynamic performance: • 24-bit PCM or 1-bit DSD output
• Equivalent input noise of –128 dBu with ZS = 150 Ω; Gain = 30 dB • Supports PCM sampling frequencies up to 216 kHz
• THD+N of 0.0004% with Gain = 30 dB • Supports 64X and 128X DSD outputs
• Includes DC servo • Fully differential inputs
• Common-mode servo improves CMRR • Low power dissipation: 600 mW at fS = 48 kHz;
• Serial interface 660 mW at fS = 96 kHz
• ±5-V supply • PCM4202 is a 2-channel version of PCM4204
• Package: 28-pin SSOP • Package: 64-lead HTQFP PowerPAD™ (PCM4204) and
28-lead SSOP (PCM4202)
Applications
• Professional microphones Applications
• Broadcast studio equipment • Professional studio equipment
• DVD-Audio and super audio compact disc (SACD)
0 dB CS
ZCEN Serial SCLK VINR+ Delta-
GPO1 Port SDI Sigma
Decimation
HPF
Filter LRCK
GPO2 and SDO
VINR– Modulator
or DSDBCK
GPO3 Control OVL VCOMR BCK
GPO4 Logic or DSDL
AGNDR Voltage DATA
Reference or DSDR
VREFR Audio
VCOMIN Serial
Port
VOUT+
VIN+ OVFR
PGA VREFL
Voltage OVRL
VIN– VOUT– Reference S/~M
AGNDL
FMT0
Gain Range CS1* FMT1
0 dB, VCOML
CS2* SCKI
RST
* CS1 and CS2 are off-chip capacitors DCEN VCC AGND VDD DGND
Get datasheets at: www.ti.com/sc/device/PCM4201 Get samples, datasheets and evaluation modules at:
www.ti.com/sc/device/PCM4104
SCKI
/RST PCM4104 Block Diagram
VCC AGND VDD DGND
Get datasheets at: www.ti.com/sc/device/PCM1792 Get samples and datasheets at: www.ti.com/sc/device/PARTNUMBER
(Replace PARTNUMBER in URL with SRC4184, SRC4190, SRC4192
The PCM1792 utilizes TI’s advanced segment DAC architecture to SRC4193 or SRC4194)
achieve unparalleled dynamic performance and improved tolerance to
clock jitter. The PCM1792 provides balanced current outputs, allowing The SRC4192 and SRC4193 are asynchronous sample rate converters
the user to optimize analog performance externally. designed for professional audio and broadcast applications. They
Key Features provide a wide input-to-output sampling ratio range with excellent
• Analog performance: dynamic range and ultra-low distortion. The SRC4192 offers pin-
• Dynamic range: 126 dB (typ) programmable configurations, while the SRC4193 has a three-wire
• THD+N: 0.0003% (typ) port for access to control register programming.
• Full-scale output: 2 V rms (at post amp) Key Features
• 8X oversampling digital filter: • Supports input/output sampling frequencies up to 212 kHz
• Stop-band attenuation: –130 dB • Automatically detects input-to-output sampling ratio
• Pass-band ripple: ±0.00001 dB • Wide input-to-output conversion range: 1:16 to 16:1
• Sampling frequency: 10 to 200 kHz • Dynamic range: 144 dB; THD+N: –140 dB (SRC4194)
• 24-bit resolution • Standalone (SRC4192) or software controlled (SRC4193)
• System clock: 128, 192, 256, 384, 512 or 768 fS with auto detect • SRC4190: Dynamic range: 128 dB; THD+N: –125 dB;
• Accepts 16-, 20- and 24-bit audio data pin compatible with SRC4192
• PCM data formats: standard, I2S and left justified • 4-channel versions: SRC4194 and SRC4184
• DSD format interface available • Package: 28-lead SSOP
• Optional interface to external digital filter or DSP available
• TDMCA or serial port (SPI/I2C) Applications
• Professional broadcast equipment
Applications • Recording studio consoles
• AV receivers
• SACD players
• DVD audio players SDIN
LRCKI Interpolator
• HDTV receivers BCKI Audio
Interpolator FIFO and
Re-Sampler
• Car audio systems IFMT0 Input
IFMT1 Port
• Digital multitrack recorders IFMT2
BYPASS FsIN Address
Rate
I/V and Filter RDY
IOUTL– Estimator
LRCK Current VOUTL
MUTE and
Audio Segment Coefficient Coefficients
BCK DAC IOUTL+
Data SDOUT Calculation
Input 8X FsOUT
DATA Over- Advanced
LRCKO
I/F
Sampling Segmented Bias VCOML BCKO
RST Digital DAC and Audio
IREF TDMI
Filter Modulator VREF Output
MDO and VCOMR OFMT0
Port Decimator
MDI
Function I/V and Filter OFMT1
Control IOUTR–
Function OWL0
MC Control Current VOUTR
I/F Segment OWL1
IOUTR+
MS DAC
MSEL MCKI
MCKO Clock Reset
System
ZEROL Zero Clock Power Supply
MODE0 Generator Logic
ZEROR Detect Manager MODE1
MODE2
DGND
VDD
AGNDF
VCCF
AGNDC
VCCC
AGNDR
VCCR
AGNDL
VCCL
RST
SCK LGRP
VDD Power
DGND1
PCM1792 Block Diagram Supply
VIO
DGND2
* CS1 and CS2 are off-chip capacitors
The DIT4096 and DIT4192 are digital audio transmitters designed for
both professional and consumer audio applications. Both support
software and hardware operation, which makes them suitable for
applications with or without a microcontroller. A flexible, serial audio
interface supports standard audio data formats and easy interface to
audio DSP serial ports.
Key Features
• Compliant with AES-3, IEC-60958 and EIAJ CP1201 standards
• Sampling rates up to 96 kHz (DIT4096); 192 kHz (DIT4192)
• On-chip differential line driver
• Standalone or software-controlled configuration
• Core and driver supply: +5 V
• Digital I/O supply: +2.7 V to +5 V
• Package: 28-lead TSSOP
Applications
• Broadcast studio equipment
• Digital mixing consoles
• Effects processors
RXP
U
SYNC TX+
Line
Audio Driver
SCLK Serial AES-3 Encoder TX–
Port
SDATA
Serial
Reset Control Interface, Clock MCLK
RST Logic Control Registers,
Generator
and Channel Status
Data Buffers
Control Port
BLS
INT
Ô
Audio Power Amplifiers
Linear Regulators
VOUT/VREF IOUT
VOUT Nom Tolerance IOUT for Regulation IQ Vdo (typ) Vdo (max) VIN VIN-VOUT
Device (V) Over Temp (%) (max) (mA) (min) (mA) (max) (mA) (V) (V) (max) (V) (max) (V) Price1
LM317, LM317M Adj (1.2 to 37) 4 1500, 500 3.5 —- — 3 — 40 0.27
TL780-xx 5, 12, 15 2 1500 — 8 2 2 - 2.5 25, 30, 30 — 0.32
UA78xx 5, 8, 10, 12, 15, 24 5 1500 — 8 2 2-3 25 to 38 — 0.23
UA79xx -5, -8, -12, -15 5 1500 — 2 1.1 2 - 2.5 -25 to 30 — 0.27
1
Suggested resale price in U.S. dollars in quantities of 1,000.
Ô
Data Converters
Data Converters
Resolution Dynamic Sampling Rate Audio Data Power
Device Description (bits) (max) Range (dB) (kHz) (max) Configuration Format Supply (V) Package Price1
DACs
PCM1780/81/82 Low-Cost Audio DAC w/Volume Control 24 105 192 Stereo Normal, I2S +5 SSOP-16 1.10
PCM1753/54/55 Low-Cost Audio DAC w/Volume Control 24 106 192 Stereo Normal, I2S +5 SSOP-16 0.98
PCM1741 Low-Cost Audio DAC w/Volume Control 24 98 96 Stereo Normal, I2S +3.3 SSOP-16 1.56
PCM1742 Low-Cost Audio DAC w/Volume Control 24 100 192 Stereo Normal, I2S +3.3 and +5 SSOP-16 1.72
PCM1742K Low-Cost Audio DAC w/Volume Control 24 105 192 Stereo Normal, I2S +3.3 and +5 SSOP-16 1.10
PCM1748 Low-Cost Audio DAC w/Volume Control 24 100 96 Stereo Normal, I2S +3.3 and +5 SSOP-16 1.47
PCM1748K Low-Cost Audio DAC w/Volume Control 24 105 96 Stereo Normal, I2S +3.3 and +5 SSOP-16 1.67
PCM1716/28 CMOS, Multilevel ∆∑ w/Volume Control 24 106 96 Stereo Normal, I2S +5 SSOP-28 2.27
PCM1737/39 CMOS, Multilevel ∆∑ w/Volume Control 24 106 192 Stereo Normal, I2S +3.3 and +5 SSOP-28 3.51
PCM1720 CMOS, Multilevel ∆∑ w/Volume Control 24 96 96 Stereo Normal, I2S +5 SSOP-20 1.85
PCM1717/18 Stereo Audio DAC w/ Wide Supply Range 18 96 48 Stereo Normal, I2S +2.7 to +5.5 SSOP-20 3.21
PCM1719 Stereo Audio DAC w/ Headphone Amplifier 18 96 48 Stereo Normal, I2S +5 SSOP-28 4.20
PCM1723 W/int. PLL, generate DAD/MPEG Clocks 24 94 96 Stereo Normal, I2S +5 SSOP-24 2.20
PCM1727 W/int. Dual-PLL, for DAD/MPEG Systems 24 92 96 Stereo Normal, I2S +5 SSOP-24 2.97
PCM1740 W/internal VCXO and PLL 24 94 96 Stereo Normal, I2S +5 SSOP-24 2.97
PCM1725 Low-Cost Audio DAC 16 95 96 Stereo Normal, I2S +5 SO-14 1.26
PCM1733 Low-Cost Audio DAC 18 95 96 Stereo Normal, I2S +5 SO-14 1.26
PCM1744 Low-Cost Audio DAC 24 95 96 Stereo I2S +5 SO-14 1.26
DSD1702 PCM/DSD Compatible DAC 24 106 192 Stereo Normal, I2S, DSD +3.3 and +5 SSOP-20 1.85
Power DAC ADC Sampling Rate Resolution Power
Device Description Dissipation (mW) SNR (dB) SNR (dB) (max) (Bits) (max)(Bits) Supply (V) Package(s) Price1
TLV320DAC23 Low-Power DAC w/Headphone Amp 23 100 N/A 96 24 +1.5 to +3.3 SSOP-28 1.90
TLV320DAC26 Low-Power DAC w/ HP/Spkr Amp 11 97 N/A 53 24 +2.7 to +3.6 QFN-32 2.95
PCM1770/1 Low-Power DAC w/Headphone Amp 6.5 98 N/A 48 24 +1.6 to +3.6 TSSOP-16, VQFN-20 1.95
PCM1772/3 Low-Power DAC w/Line Amp 6.5 98 N/A 48 24 +1.6 to +3.6 TSSOP-16, VQFN-20 1.95
Resolution Dynamic Sampling Rate Audio Data Power
Device Description (bits) (max) Range (dB) (kHz) (max) Configuration Format Supply (V) Package(s) Price1
High-Performance DACs
DSD1700 Mono Channel DSD DAC — 110 — Mono DSD +5 SSOP-28 10.07
PCM1704 BiCMOS, Sign Magnitude 24 112 768 Mono Serial Latched ±5 SOIC-20 12.95
PCM1702P/U BiCMOS, Sign Magnitude 20 110 768 Mono Serial Latched ±5 DIP-16, SOP-20 11.78
PCM1710 CMOS, Multilevel ∆∑ 20 110 48 Stereo Normal, I2S ±5 SOIC-28 4.00
PCM1738 Advanced Segment 24 117 192 Stereo Normal, I2S, DSD +3.3 and +5 SSOP-28 5.00
PCM1791 Advanced Segment 24 112 192 Stereo Normal, I2S +3.3 and +5 SSOP-28 3.00
PCM1792 High-Performance Audio DAC 24 132 192 Stereo Standard, +3.3 and +5 SSOP-28 13.00
(Mono Mode) I2S, Left Justified
PCM4104 High-Performance Audio DAC 24 117 192 4 ch Left Justified, +3.3 and +5 TQFP-48 7.50
Rt. Just., I2S, TDM
Multichannel DACs
PCM1680 Low-Cost 8-Ch Audio DAC 24 103 192 8 ch Normal, I2S +5 SSOP-24 2.60
PCM1608 Highly Integrated 8-Ch Audio DAC 24 100 192 8 ch Normal, I2S +3.3 and +5 LQFP-48 4.10
PCM1608K CMOS, Multilevel ∆∑ 24 105 192 8 ch Normal, I2S +3.3 and +5 LQFP-48 4.66
PCM1606 Low-Cost CMOS, Multilevel ∆∑ 24 103 192 6 ch Normal, I2S +5 SSOP-20 2.48
PCM1605 CMOS, Multilevel ∆∑ 24 105 192 6 ch Normal, I2S +3.3 and +5 MQFP-48 4.35
PCM1604 CMOS, Multilevel ∆∑ 24 105 192 6 ch Normal, I2S +3.3 and +5 LQFP-48 4.35
PCM1602 Low-Cost CMOS, Multilevel ∆∑ 24 100 192 6 ch Normal, I2S +3.3 and +5 LQFP-48 3.09
PCM1602K Low-Cost CMOS, Multilevel ∆∑ 24 105 192 6 ch Normal, I2S +3.3 and +5 LQFP-48 3.49
PCM1601 CMOS, Multilevel ∆∑ 24 105 96 6 ch Normal, I2S +3.3 and +5 MQFP-48 3.95
PCM1600 CMOS, Multilevel ∆∑ 24 105 96 6 ch Normal, I2S +3.3 and +5 LQFP-48 3.95
DSD1608 Enhanced Multiformat ∆∑ DAC 24 108 192 8 ch Normal, I2S, DSD +3.3 and +5 TQFP-52 5.68
ADCs
PCM1850 Stereo Audio ADC w/ 2x6 input MUX 24 100 96 Stereo Normal, I2S +3.3 and +5 TQFP-32 4.80
PCM1804 ∆∑ Audio ADC 24 110 192 Stereo Normal, I2S, DSD +3.3 and +5 SSOP-28 4.95
PCM1802 ∆∑ Audio ADC 24 100 96 Stereo Normal, I2S +3.3 and +5 SSOP-20 3.95
PCM1800 CMOS, Multilevel DS 20 95 48 Stereo Normal, I2S +5 SSOP-24 2.98
PCM1801 Low-Cost Audio ADC 16 93 48 Stereo Normal, I2S +5 SO-14 2.27
PCM4202/04 High-Performance Audio ADC 24 118 192 Stereo I2S, DSD +3.3 and +5 SSOP-28 7.95
1 Preview devices are listed in BOLD BLUE.
Suggested resale price in U.S. dollars in quantities of 1,000.
Ô
Digital Audio Amplifiers and Processors and Level Translators
Digital Audio PWM Processors
Sampling Dynamic Audio THD+N (%, System
Device Channels Frequency Range Controls Performance) Bits Package Price1
TAS5026A 6 32 to 192 96 — < 0.08 16, 20, 24 PQFP-64 7.27
TAS5036B 6 32 to 192 100 — < 0.08 16, 20, 24 PQFP-80 13.90
TAS5010 2 32 to 192 96 — < 0.08 16, 20, 24 PQFP-48 3.17
TAS5012 2 32 to 192 102 — < 0.08 16, 20, 24 PQFP-48 5.89
TAS5504 4 32 to 192 102 Volume, Audio Filters < 0.1 16, 20, 24 PQFP-64 4.30
TAS5508 8 32 to 192 100 Volume, Audio Filters < 0.1 16, 20, 24 PQFP-64 6.30
TAS5066 6 32 to 192 98 Volume < 0.1 16, 20, 24 PQFP-64 5.75
TAS5076 6 32 to 192 105 Volume < 0.1 16, 20, 24 PQFP-80 12.35
TAS5086 6 32 to 192 100 Volume, Bass Mgmt. < 0.1 16, 20, 24 TSSOP-38 TBD
1 2
Suggested resale price in U.S. dollars in quantities of 1,000. Requires Equibit™ license. Preview devices are listed in BOLD BLUE.
Ô
Professional Audio
Microphone Preamplifiers
Gain Range Noise (EIN), THD+N with Power Supply
Device Description (dB) G = 30 dB Gain = 30 dB (%) (V) Package Price1
PGA2500 Mic Preamp 0 dB, and 10 dB to –128 dBu 0.0004 ±5 SSOP-28 9.95
65 dB in 1-dB steps
1
Suggested resale price in U.S. dollars in quantities of 1,000.
Volume Controls
Power Voltage
Dynamic THD+N at Crosstalk at Supply Swing
1
Device Description Range (dB) 1 kHz (%) 1 kHz (dBFS) (V) (Vpp) Package(s) Price
PGA2310 BiCMOS, Stereo Audio Volume Control 120 0.0004 –126 ±15 27 SOL-16, DIP-16 9.95
PGA2320 BiCMOS, Stereo Audio Volume Control 120 0.0004 –126 ±15 27 SOL-16 TBD
PGA2311 CMOS, Stereo Audio Volume Control 120 0.0002 –130 ±5 7.5 SOL-16, DIP-16 5.20
PGA4311 CMOS, 4-Channel Audio Volume Control 120 0.0002 –130 ±5 7.5 SOP-28 8.90
1
Suggested resale price in U.S. dollars in quantities of 1,000.
Digital Audio Interface Products and Asynchronous Sample Rate Converters (ASRC)
Input/Output Power
Dynamic THD+N Sampling Rate Control Audio Data Supply
Device Description Range (dB) (dB) (kHz) (max) Mode Format (V) Package Price1
Asynchronous Sample Rate Converters
SRC4192 Highest-Performance Stereo ASRC 144 –140 212 H/W Normal, I2S, TDM +3.3 SSOP-28 10.45
SRC4193 Highest-Performance Stereo ASRC 144 –140 212 S/W (SPI) Normal, I2S, TDM +3.3 SSOP-28 10.45
SRC4194 Highest-Performance 4-Channel ASRC 144 –140 212 S/W (SPI), H/W Normal, I2S, TDM +1.8 or +3.3 TQFP-64 17.50
SRC4190 Stereo ASRC 128 –125 212 H/W Normal, I2S, TDM +3.3 SSOP-28 4.95
SRC4184 4-Channel ASRC 128 –125 212 S/W (SPI), H/W Normal, I2S, TDM +1.8 or +3.3 TQFP-64 9.95
Digital Interface
DIT4096 Digital Audio Interface Transmitter — — 96 S/W (SPI), H/W AES/EBU, S/PDIF +3.3 and +5 TSSOP-28 1.55
DIT4192 Digital Audio Interface Transmitter — — 192 S/W (SPI), H/W AES/EBU, S/PDIF +3.3 and +5 TSSOP-28 2.05
1
Suggested resale price in U.S. dollars in quantities of 1,000.
Consumers are enjoying new ways to listen to music, books and news,
while demanding more flexibility, better quality and multifunction Points to Consider When Choosing
products. There is an ever-increasing demand for high-end entertain- an Audio Power Amplifer (APA)
ment for the everyday consumer. The market expects the best listening • Is the APA driving speakers or headphones?
experience from any audio format and source, mobile or stationary and • What is the impedance of the heaphones or speakers:
at a competitive price. 4 Ω, 8 Ω, 32 Ω?
• Is the application stereo, mono or multichannel?
By offering flexible, cost-efficient end-to-end audio solutions, TI • Is the supply voltage ≤ 3 V, 5 V, 12 V or ≥ 18 V?
provides OEMs and ODMs with faster time-to-market and one-stop • What is the required output power?
shopping. TI's complete audio solutions include best-in-class silicon, • Is there a need for volume control?
systems expertise, software and support. By leveraging the program-
mability, performance headroom and design flexibility of TI's leading
DSP and analog technologies, customers have the ability to build
audio products with more functionality that offer a true, lifelike sound Amplifier technology (Class-D and Class-AB): Class-D and Class-AB
experience at a lower overall system cost. are the most common APAs in consumer electronics because of their
great performance and low cost. Class-D amps are very efficient and
Design Considerations provide the longest battery life and lowest heat dissipation. Class-AB
amps offer the greatest selection of features (e.g. digital volume
PRIMARY
control and bass boost).
Output power: Supply voltage and load impedance limit the level of
output power (i.e. volume) an audio power amp (APA) can drive. SECONDARY
Always verify that the desired output power is theoretically possible Digital volume control: This input changes the gain of the APA when
with the equation digital high or low pulses are applied to the UP and DOWN pins
of the IC.
VO2
PO =
RL DC volume control: Internal gain settings that are controlled by DC
voltage applied to the VOLUME pin of the IC.
where VO is the RMS voltage of the output signal and RL is the load
impedance. Integrated gain settings: The internal gain settings are controlled via
the input pins GAIN0 and GAIN1 of the IC.
Output configuration: There are two types of output configurations,
single-ended (SE) and bridge-tied load (BTL). An SE configuration is DEPOP: Circuitry internal to the APA. It minimizes voltage spikes when
where one end of the load is connected to the APA and the other end the APA turns on, off or transitions in or out of shutdown mode.
of the load is connected to ground. Used primarily in headphone
applications or where the audio power amplifier and speaker are in MUX: Allows two different audio sources to the APA that are
different enclosures. A BTL configuration is where both ends of the controlled independently of the amplifier configuration.
load are connected to an APA. This configuration effectively
quadruples the output power capability of the system and is used Shutdown: Circuitry that places the APA in a very low power
primarily in applications that are space constrained and where the consumption standby state.
APA and speaker are in the same enclosure.
Ô
Audio Amplifier Design Considerations
100
TAS5182
50 TAS5110
30 TAS5100A
TPA3001D1
(W)
17
TPA3004D2 TAS5101
15
TPA3008D2
10 TPA3002D2
6 TPA3005D2
TPA6211A1
TPA3007D1
3
TPA02x3, TPA0211
TPA1517
Desired Output Power (Max)
TPA6011A4 TPA3003D2
TPA0172 TPA6030A4
TPA02x2
TPA6010A4 Applications Include
TPA6017A2 Notebook Computers, Multimedia Speakers,
2 LCD Monitors, Set-Top Boxes, DVD Receivers, AV Receivers,
TPA2000Dx Digital TVs and Automotive
TPA2010D1
TPA6204A1
TPA6203A1
Digital Amp
TPA0253
Applications Include Class-AB
TPA2001Dx Portable Audio and Wireless Class-D
(W)
1 TPA2012D2
TPA2005D1
TPA6120A2
(mW)
150 TPA611xA2
Applications Include
TPA4411 TPA152 Stereo Headphones
50 TPA610xA2
1.6 2.5 3.6 4.5 5.5 8.0 9.5 10 14.0 18.0 20.0 28.0 33.0 40.0
Supply Voltage (V)
Technical Information Layout: By respecting basic rules, Class-D amplifiers’ layout can be
TI APAs are easy to design with, requiring only a few external made easy. Decoupling caps must be close to the device, the output
components. loop must be small to avoid the use of a filter and the differential
input traces must be kept together to limit the RF rectification. Analog
Power supply capacitors: CVDD minimizes THD by filtering off the low VDD and switching VDD need to be separated back to the supply
frequency noise and the high frequency transients. source.
Input capacitors: In the typical application an input capacitor, CIN, is Migration path: APA products are in a constant evolution moving from
required to allow the amplifier to bias the input signal to the proper dc Class-AB mono speaker drivers to optimized stereo Class-D amplifiers
level for optimum operation. CIN is usually in the 0.1 µF to 10 µF range with advanced features. The latest generation is the most cost effec-
for good low-frequency response. tive for the application.
Evaluation Modules (EVMs)
Get TI’s latest solutions in the Video and Imaging Solutions Guide
The Video and Imaging Solutions Guide provides a single, concise
tool to obtain information quickly about TI’s high-performance analog
and digital video and imaging products.
The Video and Imaging Solutions Guide offers key features and
applications, diagrams, parametric values and a resource
section identifying additional information and tools.
UPDATED
To order your free copy, return the enclosed reply card or
1005 download it at www.ti.com/solutions
SZZB002C