Beruflich Dokumente
Kultur Dokumente
2010 CATALOG
U.S.A. , has been a major knife supplier to the U.S. Armed Forces. Our military supply roots go deep into history, Ontario Knife began supplying the U.S. Military during WWII with our famous 18 inch Machete. Since then, Ontario Knife has consistently developed new knife designs utilizing cutting-edge technology, materials, and manufacturing techniques that allow our armed forces and other industries to be on the leading edge of the best knives in the world. To serve our country, Ontario Knife has developed a nation-wide network of distributors and dealers to market these products to the tactical/military, hunting, outdoors and cutlery industriesworldwide!
OKC
ER
IE
NEW
Knife is 10.25 overall with 4.5 blade, .25 thickness.
MADE IN THE U.S.A.
These knives feature 5160 steel and black texture powder coated blades.
Comes standard with MOLLE compatible black nylon sheath with edge protecting hard plastic insert and roomy utility pouch
NOT SHOWN: RD6 Series- 11.75" overall with 6" blade RD7 Series-13.25" overall with 7.5" blade RD9 Series-15.25" overall with 9.5" blade
F 1
OKC
NEW
These knives feature 5160 steel and black texture powder coated blades. Comes standard with MOLLE compatible black nylon sheath with edge protecting hard plastic insert and roomy utility pouch.
ER
IE
D E F
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
OKC
ER
IE
NEW
These knives feature 5160 steel and black texture powder coated blades. Comes standard with MOLLE compatible black nylon sheath with edge protecting hard plastic insert and roomy utility pouch.
C A B
OKC
NEW
These knives feature 1095 steel and black texture powder coated blades. Comes standard with MOLLE compatible black nylon sheath with edge protecting hard plastic insert and roomy utility pouch.
ER
IE
B C D E
MADE IN THE U.S.A.
Comes standard with MOLLE compatible black nylon sheath with edge protecting hard plastic insert and roomy utility pouch
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
OKC
ER
IE
NEW
These knives feature 1095 steel and black texture powder coated blades. Comes standard with black custom molded Kydex sheath with para-cord neck lanyard.
9412TM
9412BM
OKC
NEW
These knives feature 1095 steel and black texture powder coated blades. Black nylon sheath included.
ER
IE
C B A
C. Tan Cord Wrap Handle D. Tan Micarta Handle E. Orange G10 Handle
9411OM 9411BM
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
NEW
Includes Black Nylon Sheath
A B C D E F
These knives feature 1095 steel and black texture powder coated blades. Black nylon sheath is included.
OKC
ER
IE
OKC
NEW
The hawk series feature 1075 carbon steel and black texture powder coated blades. Black nylon sheath is included.
ER
IE
C A B D
A. RD Hawk Pick
9423BM
B. RD Hawk
9425BM
C. SP8 Machete
8335 15.125" overall with 10" blade, .250" thickness, 1095 carbon steel epoxy powder coat. leather/Cordura sheath included 8980 420 H.C. Stainless Blade 3.25" spear blade, can opener, punch, screwdriver, cap lifter, 3.625" length closed and U.S. embossed stainless steel handle and lanyard shackle
RD Hawks are 12" overall with .25" thickness. 1075 carbon steel.
MADE IN THE U.S.A.
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
NEW
These knives feature 5160 steel and black texture powder coated blades, comfortable KRATON handles, full tang, & lanyard. Sheath included.
Black Nylon Sheath with plastic insert for SP42, SP43 & SP45
Gen II SP41
Gen II SP40
Gen II SP43
Gen II SP45
Gen II SP42
Ontario Knife has been manufacturing the 1-18 Machete under U.S. Government specifications for over 60 years. The same high quality machete that our troops expect is found in all the machetes we make including our D handle machete! Features include: 1095 carbon blade, zinc phosphate finish, full tang construction, shatterproof handles, and steel compression rivets
Our LC Econo Machetes offer performance, rugged reliability, with affordable pricing in a machete made right here in the Good Ol U.S.A.
F G
F. LC18 A
18" blade - 23.25" overall length, .080" blade thickness No. 6148
12" blade - 17.25" overall length, .125" blade thickness No. 8297
G. LC12
C. 1-18 Machete
18" blade - 23.25" overall length, .125" blade thickness No. 6145 NSN: 5110-00-813-1286
12" blade - 17.25" overall length, .080" blade thickness No. 8293
18" blade - 23.25" overall length, .125" blade thickness No. 6120
E. CT5 Machete
22" blade - 27.25" overall length, .125" blade thickness No. 8294
Black Denier Nylon Packcloth Sheath with Heavy Liner and Web Belt Loop Available For All Machetes. BSH12", BSH18", BSH22"
10
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
Our one piece molded D handle machete is great for surveyors, construction workers, hunters, campers, gardeners, landscapers and 1000s of other outdoor uses. Features 1095 carbon blade, zinc phosphate finish, full tang construction and 3 different blade lengths to choose from.
12" blade - 17.25" overall length, .125" Blade thickness No. 8510
12" blade - 17.25" overall length, .125" Blade thickness No. 8512
18" blade - 23.25" overall length, .125" Blade thickness No. 8516
18" blade - 23.25" overall length, .125" Blade thickness No. 8514
22" blade - 27.25" overall length, .125" Blade thickness No. 8520
22" blade - 27.25" overall length, .125" Blade thickness No. 8518
11
These Joe Pardue Utilitac knives feature: Zytel handles, 440 stainless steel blades, pocket clips and Cryoquenched stainless steel liners.
A B C D E G H F
Knives are 7.125" overall with 4" blade closed, .12" thickness. Manufactured in Taiwan
12
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
The Model 1 knives feature: 4-way clip position, open post construction, AUS-8 blade, full flat grind, reversible thumb stud, lanyard hole and ergonomic nylon 6 handles.
A. Model 1 Folder
B. Model 1 Folder
C. Model 1 Folder A B
Ontario RAT Folders are manufactured in Taiwan
D. Model 1 Folder
C D
13
XM Series knives are designed with a robust, overbuilt construction featuring a handle that is similar to a tactical fixed blade knife. These knives are ultra-light with heavy-duty precision balance. Manufactured with N690Co Cobalt enhanced stainless steel blades and machined aircraft aluminum handles each folding knife includes: pocket clip, ergonomic thumb ramp and finger groove, cryoquenched dual titanium liner locks.
A. XM - 1 Plain Edge
B. XM - 1S Combo Edge
8755 NSN: 1095-01-535-5733 No.8766 No.8767
14
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
The Hossom knives feature Micarta handles, N690Co-Cobalt enhanced stainless steel blades, and Titanium liner lock.
G. Retribution-1 8782
Knife is 10.625" overall with 4.265" blade, 6" closed, .200 thickness.
H. Retribution-2 8781
Knives are 8" overall with 3.375" blade, .19" thickness. XM1TM Weight: 6.3 ounces, Handle width: .85" Knife is 8.625" overall with 3.875" blade, 5" closed, .160 thickness.
H E F
Ontario XM knives are manufactured in Italy
15
NEW
N690Co Cobalt enhanced stainless steel Cryo-quenched Akulon 6G6 handle material Ergonomic thumb and finger groove Dual Titanium liner lock XR-1 features a strap cutter and glass breaker for emergency rescue, lanyard hole, reversible pocket clip for left or right carry Torx wrench, 1 set of replacement blades included
C
STRAP CUTTER GLASS BREAKER FEATURES OPEN BACK DESIGN FOR EASY CLEAN-UP
16
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
NEW
MADE IN THE U.S.A.
A
Not Shown: 9428 Entry Tool 18 Black, 18 overall length .250 thickness 9428G Entry Tool 18 Safety Green, 18 overall length .250 thickness
Field tested for extreme conditions, the XR Entry Tool combines the functionality of five separate devices into one universal head design. Used as an axe, prybar, hydrant wrench, gas shut off and spanner wrench (2-1/2" hoses and water mains) this tool is a necessity for all emergency and rescue professionals. Extreme Conditions require extreme tools.
C XM Strike Fighter 8746 Serrated NSN: 1095-01-569-7934 D. Econo Strap Cutter 1420
6.573" overall, 1.205"width, 2.8 oz weight w/ sheath, .200 thickness.
Ergonomic design with featured finger grooves and hand catch provide sightless orientation for quick work. Complete with oxygen valve. Handle is constructed from high-strength machined aluminum and will not melt or shatter. Cutter is shatter proof, impact & corrosion resistant, flexible, and comes standard with TiNi coated blades.
Includes Black Nylon Sheath
Blade length 3.75", 8.5" overall, .125" thickness, weight, 4.5 oz.
C XM Strike Fighter offers auto open with safety, 154 CM stainless steel blade, Tribocote R40 finish and 6061-T6 Aluminum handle .55" handle thickness. Outside button to release blade. Secondary safety lock. SOLD TO U.S. MILITARY AND LAW ENFORCEMENT ONLY
17
SPEC PLUS Series knives are designed for military, sporting and rescue use. Features includes: comfortable Kraton handles, epoxy powder coated 1095 carbon steel blades, full tang, combination leather/Cordura sheaths, lanyard and proudly made in the U.S.A.
D. SP8 - Machete-8335
Knife is 15.125" overall with 10" blade, .250" thickness.
18
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
Knife features 1095 carbon steel blade, steel butt cap and full tang construction. Cordura/ Kydex sheath comes with field sharpening stone and metal frey resistant end cap.
Knife is 9.50" overall with 5" blade, .187" thickness. Includes powder coat finish, line cutter & saw/teeth.
A. SP24 USN-1-8480
NSN:1095-01-515-9874
A
MADE IN THE U.S.A.
B C
B & C include black leather Cordura sheath
D
Camo sheath Included
19
Whether it is the RAT or our TAK Series knives, you can rest assured these knives will stand the test of durability. TAK knife features include 1095 carbon blades, canvas micarta handles, and sheath. RAT-3 knife features include 1095 carbon steel blades, canvas micarta handles and molded sheath. RAT-5 knife features include 5" flat ground 1095 carbon steel blades, canvas micarta handles with skull crusher pommel, and lined cordura sheath with pocket. A. TAK Canvas Micarta-8603
Carbon steel blade-serrated edge.
D E F
20
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
The RTAK-II features 1095 carbon steel construction, foliage green texture powder coated finish, and canvas micarta handles. Comes standard with MOLLE compatible black nylon sheath with edge protecting hard plastic insert and roomy utility pouch. RAT-7 features 1095 carbon steel blades, texture powder coated finish, and canvas micarta handles. Includes lined Cordura sheath w/accessory pocket.
8629
Comes standard with MOLLE compatible black nylon sheath with edge protecting hard plastic insert and roomy utility pouch.
C B
RAT-7 Knives are 12" overall with 6.50" blade, .187" thickness. RTAK II knives are 16.5" overall with 10"blade, .187" thickness.
21
ASEK Aircrew Survival Egress Knife This knife is used by the Air Warrior Program and other branches of the U.S. Armed Forces. Features include: 1095 carbon steel blade -.1875 thickness 10.25 overall length 5 blade length Hardness Rc 50-54 Zinc phosphate finish to inhibit rust Serrated edge and sawteeth on spine One piece molded handle with spear holes Insulated handle molded over guard Butt cap can be used as a hammer Lanyard hole and glass breaker on butt cap Flame retardant nylon sheath w/Kydex insert, two leg protectors and straps Anodized aluminum strap cutter w/screwdriver, honing rod, lanyard and replaceable blade
499 Survival Knife & Sheath This knife is used by several branches of the U.S. Armed Forces. Features include: 1095 carbon steel blade .1875 thickness 9.5" overall length 5" blade length Zinc phosphate finish to inhibit rust Sawteeth on spine Natural leather handle Steel butt cap Leather sheath with sharpening stone and tie down cord
22
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
OKC3S USMC Training Bayonet 1910 NSN: 8465-01-539-3492 Mark 3-Navy Knife & Sheath - 6141 This knife is used exclusively by U.S. Naval Forces. NSN: 1095-00-391-1056 Features include: 440A stainless steel blade , black oxide finish 10.75" overall length, 6.5" blade, .165" thickness Molded high impact plastic handle and sheath Sheath equipped with brass belt hanger and loop
OKC3S USMC Bayonet 6504 This knife is used/issued by United States Marine Corps Features include: .200" thick proprietary carbon steel 13.25" overall length - 8" blade length Hardness Rc 53-58 1.75 mission serration Zinc phosphate nonreflective finish Dynaflex handle ergonomically grooved to reduce hand fatigue Manufactured with a low noise signature polyester elastomer Fitted internal stainless steel spring friction to secure bayonet Ceramic coated aluminum honing rod located on back of scabbard Equipped with two load bearing attaching straps with cross straps Optional OKC3S compatible leg straps available
498 Marine Combat Knife - 8180 This knife is used exclusively by U.S. Marine Forces. Features include: 1095 carbon steel blade 12" overall length, 7" blade, .165" thickness Zinc phosphate finish Weather-proofed leather handle Steel buttcap Black leather sheath 498 Marine Combat Knife & Sheath 8180 NSN: 1095-00-392-4102
23
M9-Bayonet Available in Black or OD Green. Features include: 420 modified stainless steel blade 12.125" overall length, 7" blade, .235" thickness Milled sawteeth on back Black oxide non-reflective finish Textured thermoplastic nylon handle Fits M16, M4 and AR-15
OKC 1FTS Bayonet Features include: 1095 carbon steel blade 12.75" overall length, 7.5" blade, .200" thickness Zinc phosphate non-reflective finish Ergonomically designed handle Hard plastic sheath MOLLE compatible Fits M16, M4 and AR-15 OKC 1FTS Bayonet-6279 M9 Bayonet & Scabbard (Black)-6143 OKC M10TM Bayonet Features include: 1095 carbon steel blade 12.125" overall length, 7" blade, .235" thickness M9 Bayonet & Slim line plastic sheath Scabbard (OD)-6220 MOLLE compatible NSN: 1095-01-227-1739 Zinc phosphate non-reflective finish Ergonomically designed brown handle Works with matching scabbard as a wire cutter Milled saw teeth on back Fits M16, M4 and AR-15
6275
M9 Scabbard Thermoplastic nylon, wire cutter and screwdriver. Equipped with a quick release military holster. Black or OD green.
24
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
M7-B Bayonet-6277 M7-B Bayonet Features include: New molded handle 1095 carbon steel blade 11.75" overall length, 6.75" blade, .1875" thickness Zinc phosphate finish Molded plastic sheath with tension clip Fits M16, M4 and AR-15
494 M7 Bayonet Features include: 1095 carbon steel blade, zinc phosphate finish 11.75" overall length, 6.75" blade, .1875" thickness Molded plastic sheath with tension clip Fits M16, M4 and AR-15 494 M7 Bayonet & Scabbard-8185 NSN: 1095-00-017-9701
MARK III-Trench Knife Features include: Leather ring handle 1095 carbon steel blade 11.75" overall length, 6.75" blade, .1875" thickness Zinc phosphate finish Natural leather sheath with brass rivets MARK III-Trench Knife & Sheath - 8155
25
OKC Model #1, Rescue Hook/Multi Tool Deluxe PETTM #1, Personal Egress Tool This tool can help save lives. Features include: High strength machined aluminum handle that will not melt or shatter Finger grooves and hand catch provide sightless orientation Flame retardant MOLLE compatible sheath Extended reach - high leverage tool and boot scraper Two oxygen valve and shackle wrenches in tool FG504 lanyard/bead for ease in finding and removing tool Includes honing rod, 3 shatter-proof Titanium Nitride edged replacement blades and spare screws stored inside sheath ASEK Strap Cutter/Multi Tool 1403 NSN: 1095-01-518-6877
Anodized aluminum strap cutter w/screwdriver tip, honing rod, lanyard and replaceable blade
1420
6.573 overall, 1.205width, 2.8 oz weight w/ sheath, .200 thickness. Product details shown of page 17
26
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
These knives are designed with brushed 440A stainless steel blades, stacked leather and colored fiber washers, brass guard and butt cap and leather sheath. Full tang construction.
27
The Old Hickory knife is made with fully heat treated and tempered 1095 carbon steel. Fitted with attractive hardwood handles secured with brass compression rivets. After assembly, these knives go through a sharpening process to guarantee a sharp edge to meet all needs. Old Hickory has stood the test of time and proved to be the best carbon steel kitchen cutlery sold today.
B C
D A. 7000 72-6 Boning Knife B. 7015 75-8 Slicing Knife C. 1270 417 Filet Knife D. 7065 750 Paring Knife E. 7070 753 Paring Knife F. 7115 1001 5" Ice Pick
6" blade 8" blade 6" stainless blade 4" blade 3-1/4" blade 5"
E F
MADE IN THE U.S.A.
28
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
A B C
705 5-piece Cutlery Set 750 4" Paring Knife 7-7 7" Butcher Knife 75-8 8" Slicing Knife 72-6 6" Boning Knife 753 3-1/4" Paring Knife
These knives feature high carbon steel blades and hardwood handles. Extra long blade length for agricultural/ industrial cutting and chopping. Used by professional chefs and butchers. All purpose field knives are used for multi-tasking harvesting/digging and industrial cutting applications.
29
These field and harvesting knives feature high carbon steel blades, full tang construction, brush finish and hardwood handles. Extra long blade length for agricultural/industrial cutting applications. All purpose field knives are used for multi-tasking harvesting/ digging and industrial cutting applications.
A B
D E F
C. 5250 4015 1/2B Lettuce Trimmer F. 7145 75-5 1/2 Cotton Sampling
5-1/2" blade 4 1/2 handle 6" blade 4 1/2 handle
30
Proudly handcrafted by Master Cutlers of New Yorks Southern Tier since 1889
These fruit and vegetable knives are made with stainless steel blades, molded plastic handles with non-slip texture and brush finish. Great knives for chopping, slicing and dicing fruits and vegetables. Used in homes as well as commercially by professional cooks and chefs.
31
JOE PARDUE
JUSTIN GINGRICH
OKC
S
Pictured from left to right: Justin Gingrich, Designer, and Nick Trbovich, Jr., President & CEO of Ontario Knife Co. Pictured in the jungle north of Bogot, Columbia.
ER
IE
With My Dad (Mel Pardue) being a Knifemaker, I had the opportunity to learn the Art of Knifemaking at an early age. After years of apprenticing, dedication, and developing the skills necessary to make and design knives, I find that well designed utility tactical, high quality knives are my passion. My knives are tools to be used, and are designed with that in mind. Joe Pardue UTILITAC KNIVES
Ranger Knives was created and operated by blade smith Justin Gingrich. He served 10 years on active duty, in such honored units as the 3rd Ranger Battalion (92-96), 20th Special Forces Group (96-98) and the Ranger Training Brigade (98-01). Justin is also a police academy graduate. He also served in Iraq with a civilian security firm in 2005. For two months, Justin worked in post-Katrina, New Orleans providing much needed security for the private sector. He also instructs private security contractors, U. S. soldiers, State Department employees and civilians in the art of patrolling, demolitions, shooting and CQB techniques. Justin designs all Ranger Knives branded product with the professional user in mind. His military background and hands-on experience qualifies him to assess the needs of emergency services, law enforcement and military professionals. This ensures the tools ability to not only survive but to excel where others fail. If you would like to discuss his designs further, you can chat with Justin on one of our industries most active forums www.knifeforums.com.
32
SPECIAL RECOGNITION
2007 RECOGNITION FOR EXCELLENCE AWARD GOLD LEVEL Presented by the Defense Supply Center Columbus (DSCC) For the 4th year in a row, Ontario Knife Company has received the Gold Award recognizing the companys perfect score in on-time delivery and quality performance. This award is given only to companies that have earned 100% on the DSCCs Automated Best Value System (ABVS), demonstrating excellence in customer service and product quality. To be eligible, a company must have shipped 50 or more contract line items for DSCC during a 12-month period while maintaining exceptional quality and delivery performance. 2006 MATERIEL READINESS AWARD for a CONTRIBUTION by a SMALL BUSINESS Presented by the Army Aviation Association of America (AAAA) The AAAA Awards program recognizes outstanding achievements in Army Aviation in many areas. The Ontario Knife Company was privileged to be honored with the Materiel Readiness Award for a Contribution by a Small Business for its work with the Aircrew Survival Egress Knife. 2006 INNOVATIVE BUSINESS PERFORMER OF THE YEAR for a SMALL BUSINESS Presented by the Defense Logistics Agency (DLA) This prestigious DLA award recognizes small businesses that have undertaken risks associated with innovative business practices in order to meet the needs of Americas war fighters. Selected companies must also meet the DLAs Vendor Excellence Award criteria, which include demonstrated overall excellence in superior product quality, customer service, reliability, dependability, on-time delivery, consistency and accuracy.
WARRANTY
Once you purchase an Ontario Knife Company product, you can be assured we take your loyalty seriously. If any of our products fail due to faulty workmanship or faulty materials, we will replace it free of charge with the same item or with one of equal value. This limited lifetime warranty excludes products subjected to abuse, misuse or neglect. We value your business.
33
P.O. Box 145-26 Empire Street Franklinville, NY 14737 PH: 716-676-5527 800-222-5233 FAX: 716-676-5535 800-299-2618 Internet: www.ontarioknife.com Email: knifesales@ontarioknife.com 2010 Ontario Knife Co., Inc.
Printed in U.S. A. 5/10-8M