Beruflich Dokumente
Kultur Dokumente
Spring 2011
Five Sections Section-1: Microcontroller based Embedded Systems Design and Simulation (3-4 Labs)
Proteus Simulator Programming in C using CCS IDE (with PCEHD compiler) Embedded C programming skills (like Bit-manipulation) PIC18 Development Kit (if available) or PIC16
Section-2:
TMS320C6713 DSP Kit with CCS IDE C programming of DSP applications Matlab
Fall 2010
4/20/2011
Five Sections Section-3: Real Time Embedded Systems and RTOS (3-4 Labs)
CCS RTOS Simulation in Proteus Hardware Implementation (if available)
Fall 2010
Fall 2010
4/20/2011
Fall 2010
Grading
15 Labs (within the lab and not later)
Almost 1%-1.5% per lab
05% reports and attendance 05% minimini project (or case study)
No Attendance means
No lab grading and no report grading
If Course load increased then Labs will not be included in Class Exams
Quiz at end of Each Section
Fall 2010
4/20/2011
Introduction to Proteus and PIC Microcontroller based Development Kit. Designing Calculator on 7-Segment and LED Using C language in Proteus. Hardware implementation of calculator example on PIC development kit. Interface Programming and other experiments on PIC development kit
Experiment 05: Porting CCS Real-Time Operating System (RTOS) on PIC using Proteus Experiment 06: Designing/Simulating a Muti-tasking example using CCS RTOS in Proteus Experiment 07: Implementation and testing of Multi-Tasking Example on Hardware Experiment 08: Introduction to TMS320C6713 DSP Kit and Code Composer Studio (CCS). Experiment 09: Design a DSP application on TMS320C6713 DSK using C language. Experiment 10: Designing Complex examples on DSK and Linking with Matlab Experiment 11: Designing of FPGA based SOC in EDK using MicroBlaze Soft Processor Experiment 12: Interface Programming for FPGA based SOC in EDK Experiment 13: Porting XilKernel on FPGA based SOC in EDK Experiment 14: Thread Programming in Linux and XilKernel and proteus simulation for ARM7-SBC.
Fall 2010