Sie sind auf Seite 1von 5

http://www.ndt-ed.org/EducationResources/CommunityCollege/Materials/Structure/bonds.

htm

Atomic Bonding (Metallic, Ionic, Covalent, and van der Waals Bonds)
From elementary chemistry it is known that the atomic structure of any element is made up of a positively charged nucleus surrounded by electrons revolving around it. An elements atomic number indicates the number of positively charged protons in the nucleus. The atomic weight of an atom indicates how many protons and neutrons in the nucleus. To determine the number of neutrons in an atom, the atomic number is simply subtracted from the atomic weight. Atoms like to have a balanced electrical charge. Therefore, they usually have negatively charged electrons surrounding the nucleus in numbers equal to the number of protons. It is also known that electrons are present with different energies and it is convenient to consider these electrons surrounding the nucleus in energy shells. For example, magnesium, with an atomic number of 12, has two electrons in the inner shell, eight in the second shell and two in the outer shell. All chemical bonds involve electrons. Atoms will stay close together if they have a shared interest in one or more electrons. Atoms are at their most stable when they have no partiallyfilled electron shells. If an atom has only a few electrons in a shell, it will tend to lose them to empty the shell. These elements are metals. When metal atoms bond, a metallic bond occurs. When an atom has a nearly full electron shell, it will try to find electrons from another atom so that it can fill its outer shell. These elements are usually described as nonmetals. The bond between two nonmetal atoms is usually a covalent bond. Where metal and nonmetal atom come together an ionic bond occurs. There are also other, less common, types of bond but the details are beyond the scope of this material. On the next few pages, the Metallic, Covalent and Ionic bonds will be covered in more detail.

Ionic Bonds
Ionic bonding occurs between charged particles. These may be atoms or groups of atoms, but this discuss will be conducted in terms of single atoms. Ionic bonding occurs between metal atoms and nonmetal atoms. Metals usually have 1, 2, or 3 electrons in their outermost shell. Nonmetals have 5, 6, or 7 electrons in their outer shell. Atoms with outer shells that are only partially filled are unstable. To become stable, the metal atom wants to get rid of one or more electrons in its outer shell. Losing electrons will either result in an empty outer shell or get it closer to having an empty outer shell. It would like to have an empty outer shell because the next lower energy shell is a stable shell with eight electrons.

Since electrons have a negative charge, the atom that gains electrons becomes a negatively charged ions (aka anion) because it now has more electrons than protons. Alternately, an atom that loses electrons becomes a positively charged ion (aka cations). The particles in an ionic compound are held together because there are oppositely charged particles that are attracted to one another. The images above schematically show the process that takes place during the formation of an ionic bond between sodium and chlorine atoms. Note that sodium has one valence electron that it would like to give up so that it would become stable with a full outer shell of eight. Also note that chlorine has seven valence electrons and it would like to gain an electron in order to have a full shell of eight. The transfer of the electron causes the previously neutral sodium atom to become a positively charged ion (cation), and the previously neutral chlorine atom to become a negatively charged ion (anion). The attraction for the cation and the anion is called the ionic bond. Some Common Features of Materials with Ionic Bonds:

Hard Good insulators Transparent Brittle or cleave rather than deform

Covalent Bonding
Where a compound only contains nonmetal atoms, a covalent bond is formed by atoms sharing two or more electrons. Nonmetals have 4 or more electrons in their outer shells 2

(except boron). With this many electrons in the outer shell, it would require more energy to remove the electrons than would be gained by making new bonds. Therefore, both the atoms involved share a pair of electrons. Each atom gives one of its outer electrons to the electron pair, which then spends some time with each atom. Consequently, both atoms are held near each other since both atoms have a share in the electrons.

More than one electron pair can be formed with half of the electrons coming from one atom and the rest from the other atom. An important feature of this bond is that the electrons are tightly held and equally shared by the participating atoms. The atoms can be of the same element or different elements. In each molecule, the bonds between the atoms are strong but the bonds between molecules are usually weak. This makes many solid materials with covalent bonds brittle. Many ceramic materials have covalent bonds. Compounds with covalent bonds may be solid, liquid or gas at room temperature depending on the number of atoms in the compound. The more atoms in each molecule, the higher a compounds melting and boiling temperature will be. Since most covalent compounds contain only a few atoms and the forces between molecules are weak, most covalent compounds have low melting and boiling points. However, some, like carbon compounds, can be very large. An example is the diamond in which carbon atoms each share four electrons to form giant lattices. Some Common Features of Materials with Covalent Bonds:

Hard Good insulators Transparent Brittle or cleave rather than deform 3

Metallic Bonding
A common characteristic of metallic elements is they contain only one to three electrons in the outer shell. When an element has only one, two or three valence electrons (i.e. electrons in the outer shell), the bond between these electrons and the nucleus is relatively weak. So, for example, when aluminum atoms are grouped together in a block of metal, the outer electrons leave individual atoms to become part of common electron cloud. In this arrangement, the valence electrons have considerable mobility and are able to conduct heat and electricity easily. Also, the delocalized nature of the bonds, make it possible for the atoms to slide past each other when the metal is deformed instead of fracturing like glass or other brittle material.

Since the aluminum atoms lose two electrons, they end up having a positive charge and are designated Al3+ ions (cations). These ions repel each other but are held together in the block because the negative electrons are attracted to the positively charged ions. A result of the sharing of electrons is the cations arrange themselves in a regular pattern. This regular pattern of atoms is the crystalline structure of metals. In the crystal lattice, atoms are packed closely together to maximize the strength of the bonds. An actual piece of metal consists of many tiny crystals called grains that touch at grain boundaries. Some Common Features of Materials with Metallic Bonds:

Good electrical and thermal conductors due to their free valence electrons Opaque Relatively ductile 4

Van der Waals Bond


The van der Waal bonds occur to some extent in all materials but are particularly important in plastics and polymers. These materials are made up of a long string molecules consisting of carbon atoms covalently bonded with other atoms, such as hydrogen, nitrogen, oxygen, fluorine. The covalent bonds within the molecules are very strong and rupture only under extreme conditions. The bonds between the molecules that allow sliding and rupture to occur are called van der Waal forces.

When ionic and covalent bonds are present, there is some imbalance in the electrical charge of the molecule. Take water as an example. Research has determined the hydrogen atoms are bonded to the oxygen atoms at an angle of 104.5. This angle produces a positive polarity at the hydrogen-rich end of the molecule and a negative polarity at the other end. A result of this charge imbalance is that water molecules are attracted to each other. This is the force that holds the molecules together in a drop of water. This same concept can be carried on to plastics, except that as molecules become larger, the van der Waal forces between molecules also increases. For example, in polyethylene the molecules are composed of hydrogen and carbon atoms in the same ratio as ethylene gas. But there are more of each type of atom in the polyethylene molecules and as the number of atoms in a molecule increases, the matter passes from a gas to a liquid and finally to a solid. Polymers are often classified as being either a thermoplastic or a thermosetting material. Thermoplastic materials can be easily remelted for forming or recycling and thermosetting material cannot be easily remelted. In thermoplastic materials consist of long chainlike molecules. Heat can be used to break the van der Waal forces between the molecules and change the form of the material from a solid to a liquid. By contrast, thermosetting materials have a three-dimensional network of covalent bonds. These bonds cannot be easily broken by heating and, therefore, can not be remelted and formed as easily as thermoplastics. Ref: NDT Resource Centre; http://www.ndt-ed.org/index_flash.htm

Das könnte Ihnen auch gefallen