Beruflich Dokumente
Kultur Dokumente
Integrity
Integrity Instruments
Instruments Incorporated
2642 20th Ave. S.W. Pine River, MN 56474 phone 218-587-3175
www.integrityusa.com support@integrityusa.com
Data Sheet
Product Catalog
www.integrityusa.com
Data Conversion
Data Acquisition
and
Custom Engineered
Products
XP422-9A
RS232 TO RS422
CONVERTER
The XP422-9A is a fully automatic externally powered converter, and requires no RTS signal on the rs-232 side for operation. The
RS422 converter is designed for full duplex point to point operation. Built in termination is provided on the transmit and receive lines.
Signal and power LED indicators are standard for monitoring operation
XP422-9I
RS232 TO RS422
OPTICALLY ISOLATED
AUTO ENABLED CONVERTER
The XP422-9I is a fully automatic externally powered converter, and requires no RTS signal on the rs-232 side for operation. The
RS422 converter is designed for full duplex point to point operation. Built in termination is provided on the transmit and receive lines.
Signal and power LED indicators are standard for monitoring operation
XP422-25A
RS232 TO RS422
CONVERTER
The XP422-25A is a fully automatic externally powered converter, and requires no RTS signal on the rs-232 side for operation. The
RS422 converter is designed for full duplex point to point operation. Built in termination is provided on the transmit and receive lines.
Signal and power LED indicators are standard for monitoring operation
XP422-25I
RS232 TO RS422
OPTICALLY ISOLATED
CONVERTER
The XP422-25I is a fully automatic externally powered converter, and requires no RTS signal on the rs-232 side for operation. The
RS422 converter is designed for full duplex point to point operation. Built in termination is provided on the transmit and receive lines.
Signal and power LED indicators are standard for monitoring operation
XP422-DA
RS232 TO RS422
CONVERTER
The XP422-DA is a fully automatic externally powered converter, and requires no RTS signal on the rs-232 side for operation. The
RS422 converter is designed for full duplex point to point operation. Built in termination is provided on the transmit and receive lines.
Signal and power LED indicators are standard for monitoring operation
XP422-DI
RS232 TO RS422
OPTICALLY ISOLATED
CONVERTER
The XP422-DI is a fully automatic externally powered converter, and requires no RTS signal on the rs-232 side for operation. The
RS422 converter is designed for full duplex point to point operation. Built in termination is provided on the transmit and receive lines.
Signal and power LED indicators are standard for monitoring operation
XP485-9E
RS232 TO RS485
AUTO ENABLED CONVERTER
The converter rs-485 link is always in the receive state. Data sent from the rs-232 turns the rs-485 link into the transmit mode. This
remains in the transmit mode until data is not detected being sent, which then turns the rs-485 link back into the receive state. This
can be accomplished many ways the most common being RC time constants, and dip switches to control this value for different
baud rates. Integrity instruments chose to use a microprocessor to control this so the process is fully automatic at no matter what
baud rate the end user decided to use.
The XP485-9E is a fully automatic auto enabled externally powered converter, and requires no RTS signal on the rs-232 side for
operation. Fully automatic from 1200 to 115.2 K baud the unit can also be set for manual mode control at pre selected baud rates.
Signal and power LED indicators are standard for monitoring operation and built in jumper selectable termination is provided.
XP485-9EI
RS232 TO RS485
OPTIACLLY ISOLATED
AUTO ENABLED CONVERTER
The converter rs-485 link is always in the receive state. Data sent from the rs-232 turns the rs-485 link into the transmit mode. This
remains in the transmit mode until data is not detected being sent, which then turns the rs-485 link back into the receive state. This
can be accomplished many ways the most common being RC time constants, and dip switches to control this value for different
baud rates. Integrity instruments chose to use a microprocessor to control this so the process is fully automatic at no matter what
baud rate the end user decided to use.
The XP485-9Ei is a fully automatic auto enabled externally powered converter, and requires no RTS signal on the rs-232 side for
operation. Fully automatic from 1200 to 115.2 K baud the unit can also be set for manual mode control at pre selected baud rates.
Signal and power LED indicators are standard for monitoring operation and built in jumper selectable termination is provided. An
optical isolation barrier is provided between the RS232 and RS485 elements.
XP485-25E
RS232 TO RS485
AUTO ENABLED CONVERTER
The converter rs-485 link is always in the receive state. Data sent from the rs-232 turns the rs-485 link into the transmit mode. This
remains in the transmit mode until data is not detected being sent, which then turns the rs-485 link back into the receive state. This
can be accomplished many ways the most common being RC time constants, and dip switches to control this value for different
baud rates. Integrity instruments chose to use a microprocessor to control this so the process is fully automatic at no matter what
baud rate the end user decided to use.
The XP485-25E is a fully automatic auto enabled externally powered converter, and requires no RTS signal on the rs-232 side for
operation. Fully automatic from 1200 to 115.2 K baud the unit can also be set for manual mode control at pre selected baud rates.
Signal and power LED indicators are standard for monitoring operation and built in jumper selectable termination is provided.
XP485-25EI
RS232 TO RS485
OPTIACLLY ISOLATED
AUTO ENABLED CONVERTER
The converter rs-485 link is always in the receive state. Data sent from the rs-232 turns the rs-485 link into the transmit mode. This
remains in the transmit mode until data is not detected being sent, which then turns the rs-485 link back into the receive state. This
can be accomplished many ways the most common being RC time constants, and dip switches to control this value for different
baud rates. Integrity instruments chose to use a microprocessor to control this so the process is fully automatic at no matter what
baud rate the end user decided to use.
The XP485-25Ei is a fully automatic auto enabled externally powered converter, and requires no RTS signal on the rs-232 side for
operation. Fully automatic from 1200 to 115.2 K baud the unit can also be set for manual mode control at pre selected baud rates.
Signal and power LED indicators are standard for monitoring operation and built in jumper selectable termination is provided. An
optical isolation barrier is provided between the RS232 and RS485 elements.
XP485-DE
RS232 TO RS485
AUTO ENABLED CONVERTER
The converter rs-485 link is always in the receive state. Data sent from the rs-232 turns the rs-485 link into the transmit mode. This
remains in the transmit mode until data is not detected being sent, which then turns the rs-485 link back into the receive state. This
can be accomplished many ways the most common being RC time constants, and dip switches to control this value for different
baud rates. Integrity instruments chose to use a microprocessor to control this so the process is fully automatic at no matter what
baud rate the end user decided to use.
The XP485-DE is a fully automatic auto enabled externally powered converter, and requires no RTS signal on the rs-232 side for
operation. Fully automatic from 1200 to 115.2 K baud the unit can also be set for manual mode control at pre selected baud rates.
Signal and power LED indicators are standard for monitoring operation and built in jumper selectable termination is provided.
XP485-DEI
RS232 TO RS485
OPTICALLY ISOLATED
AUTO ENABLED CONVERTER
The converter rs-485 link is always in the receive state. Data sent from the rs-232 turns the rs-485 link into the transmit mode. This
remains in the transmit mode until data is not detected being sent, which then turns the rs-485 link back into the receive state. This
can be accomplished many ways the most common being RC time constants, and dip switches to control this value for different
baud rates. Integrity instruments chose to use a microprocessor to control this so the process is fully automatic at no matter what
baud rate the end user decided to use.
The XP485-DEI is a fully automatic auto enabled externally powered converter, and requires no RTS signal on the rs-232 side for
operation. Fully automatic from 1200 to 115.2 K baud the unit can also be set for manual mode control at pre selected baud rates.
Signal and power LED indicators are standard for monitoring operation and built in jumper selectable termination is provided.
TTL-25A
RS232 TO TTL
CONVERTER
This converter conveniently plugs into the DB25 connector commonly found on the standard IBM-PC.
The TTL-25A can operate for both DTE and DCE configurations with the addition of a NULL modem converter for DCE applications.
485-ADR
RS232 TO RS485
ADDRESSABLE CONVERTER
Model 485-ADR
Addressable RS-232 to RS-485 Converter
The addressable RS-485 to RS-232 converter provides an easy way to build a network of devices out of existing RS-232 equipment.
These units provide both Transmit and receive buffering of RS-232 data and a full 16 bit CRC checksum for the RS-485 network
packet error detection.
The packet protocol used on the RS-485 communication side is modeled after the ModBus protocol, and can detect duplicate pack-
ets in a case where the acknowledge packet from the Send RS-232 Data becomes corrupted.
Parameters are configured through a dedicated Debug/Configuration port. All programmed parameters are stored on non-volatile
memory. The unit parameters are set using a dumb terminal program, such as EZ-Terminal. When this unit is not in configuration
mode, this dedicated port is used to dump debug information. This information includes, RS-485 Packet Received, RS-485 Packet
Sent, RS-232 data sent, parity error, etc.
USB232-9
USB TO RS232
CONVERTER
Pentium class CPU with USB port PC. One USB type A port. Windows 98, ME, 2000, XP, or MAC 8.6 or later operating system.
Unit comes with manual and CD software disk for pain free installation.
485-RPT
RS485 TO RS485
AND
REPEATER
INTERFACE
REPEATERS
AUTO ENABLED
The repeater rs-485 link on both sides is always in the receive state. Data received from the rs-485 on one side turns the rs-485 link
on the opposite side into the transmit mode. This remains in the transmit mode until data is not detected being received, which then
turns the rs-485 link back into the receive state. This can be accomplished many ways the most common being RC time constants,
and dip switches to control this value for different baud rates. Integrity instruments chose to use a microprocessor to control this so
the process is fully automatic at no matter what baud rate the end user decided to use.
Extend the RS485 beyond the 4,000 feet limitation, or whenever there is a need to “boost” the RS485 signal
232-OPT1
RS232 TO RS232
AND
OPTICAL ISOLATED
REPEATER
INTERFACE
REPEATERS
232-OPT1
RS232 to RS232 isolator repeater 3KV
We designed the RS232 opto-isolated 4 wire repeater to provide error free RS232 data communications providing optical isolation
on the TX, RX, RTS, and CTS signal lines.
This unit provides full RS-232 3,000 volt opto isolation from 600 to 115200 baud.
The units have a DB25 male connector on one end and a DB25 female connector on the other end for "in line" cable connection.
232M200CT
INTERFACE
RS232 INTERFACE DATA MODULE
8 DIGITAL I/O
The 232M200CT offers eight digital TTL I/O that are individually selectable as input or outputs. Simple ASCII commands are used to
communicate with the module.
All I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
Enclosure None
PCB FR4
Weight 5 ounces
MPU Clock 14.7456 mHz
232M200CE
RS232 INTERFACE DATA MODULE
8 DIGITAL I/O
The 232M200CE offers eight digital TTL I/O that are individually selectable as input or outputs. Simple ASCII commands are used to
communicate with the module.
All I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
PCB FR4
Dimensions 4.375” x 3.3” x 1.24” (5.62” at flange) (111.1 mm x 84.1 mm x 31.6 mm [142.9 mm at flange])
Weight 8 ounces
MPU Clock 14.7456 mHz
232M2A0CT
INTERFACE
RS232 INTERFACE DATA MODULE
8 DIGITAL I/O
2 CHANNELS A TO D
The 232M3A0CT offers eight digital TTL I/O that are individually selectable as input or outputs. There are 2 channels of 12 bit A to D
conversion provided. Simple ASCII commands are used to communicate with the module.
All digital I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
All analog inputs, +5 vdc, + unregulated, and - unregulated are supplied through a DB 15 connector.
Enclosure None
PCB FR4
232M2A0CE
INTERFACE
RS232 INTERFACE DATA MODULE
8 DIGITAL I/O
2 CHANNELS A TO D
The 232M3A0CE offers eight digital TTL I/O that are individually selectable as input or outputs. There are 2 channels of 12 bit A to D
conversion provided. Simple ASCII commands are used to communicate with the module.
All digital I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
All analog inputs, +5 vdc, + unregulated, and - unregulated are supplied through a DB 15 connector.
PCB FR4
Dimensions 4.375” x 3.3” x 1.24” (5.62” at flange) (111.1 mm x 84.1 mm x 31.6 mm [142.9 mm at flange])
Weight 8 ounces
232M2ADCT
INTERFACE
RS232 INTERFACE DATA MODULE
8 DIGITAL I/O
2 CHANNELS A TO D INPUTS
2 CHANNELS D TO A OUTPUTS
The 232M3ADCT offers eight digital TTL I/O that are individually selectable as input or outputs. There are 2 channels of 12 bit A to D
conversion, and 2 channels of D to A outputs provided. Simple ASCII commands are used to communicate with the module.
All digital I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
All analog inputs, +5 vdc, + unregulated, and - unregulated are supplied through a DB 15 connector.
Enclosure None
PCB FR4
232M2ADCE
INTERFACE
RS232 INTERFACE DATA MODULE
8 DIGITAL I/O
2 CHANNELS A TO D INPUTS
2 CHANNELS D TO A OUTPUTS
The 232M3ADCE offers eight digital TTL I/O that are individually selectable as input or outputs. There are 2 channels of 12 bit A to
D conversion, and 2 channels of D to A outputs provided. Simple ASCII commands are used to communicate with the module.
All digital I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
All analog inputs, +5 vdc, + unregulated, and - unregulated are supplied through a DB 15 connector.
PCB FR4
Dimensions 4.375” x 3.3” x 1.24” (5.62” at flange) (111.1 mm x 84.1 mm x 31.6 mm [142.9 mm at flange])
Weight 8 ounces
232M300CT
INTERFACE
RS232 INTERFACE DATA MODULE
16 DIGITAL I/O
The 232M300CT offers sixteen digital TTL I/O that are individually selectable as input or outputs. Simple ASCII commands are used
to communicate with the module.
All I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
Enclosure None
PCB FR4
Weight 5 ounces
MPU Clock 14.7456 mHz
232M300CE
INTERFACE
RS232 INTERFACE DATA MODULE
16 DIGITAL I/O
The 232M300CE offers sixteen digital TTL I/O that are individually selectable as input or outputs. Simple ASCII commands are used
to communicate with the module.
All I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
PCB FR4
Dimensions 4.375” x 3.3” x 1.24” (5.62” at flange) (111.1 mm x 84.1 mm x 31.6 mm [142.9 mm at flange])
Weight 8 ounces
MPU Clock 14.7456 mHz
232M3A0CT
INTERFACE
RS232 INTERFACE DATA MODULE
16 DIGITAL I/O
8 CHANNELS A TO D
The 232M3A0CT offers sixteen digital TTL I/O that are individually selectable as input or outputs. There are 8 channels of 12 bit A to
D conversion provided. Simple ASCII commands are used to communicate with the module.
All digital I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
All analog inputs, +5 vdc, + unregulated, and - unregulated are supplied through a DB 15 connector.
Enclosure None
PCB FR4
232M3A0CE
INTERFACE
RS232 INTERFACE DATA MODULE
16 DIGITAL I/O
8 CHANNELS A TO D
The 232M3A0CE offers sixteen digital TTL I/O that are individually selectable as input or outputs. There are 8 channels of 12 bit A to
D conversion provided. Simple ASCII commands are used to communicate with the module.
All digital I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
All analog inputs, +5 vdc, + unregulated, and - unregulated are supplied through a DB 15 connector.
PCB FR4
Dimensions 4.375” x 3.3” x 1.24” (5.62” at flange) (111.1 mm x 84.1 mm x 31.6 mm [142.9 mm at flange])
Weight 8 ounces
232M3ADCT
INTERFACE
RS232 INTERFACE DATA MODULE
16 DIGITAL I/O
8 CHANNELS A TO D INPUTS
2 CHANNELS D TO A OUTPUTS
The 232M3ADCT offers sixteen digital TTL I/O that are individually selectable as input or outputs. There are 8 channels of 12 bit A to
D conversion, and 2 channels of D to A outputs. provided. Simple ASCII commands are used to communicate with the module.
All digital I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
All analog inputs, +5 vdc, + unregulated, and - unregulated are supplied through a DB 15 connector.
Enclosure None
PCB FR4
232M3ADCE
INTERFACE
RS232 INTERFACE DATA MODULE
16 DIGITAL I/O
8 CHANNELS A TO D INPUTS
2 CHANNELS D TO A OUTPUTS
The 232M3ADCE offers sixteen digital TTL I/O that are individually selectable as input or outputs. There are 8 channels of 12 bit A
to D conversion, and 2 channels of D to A outputs provided. Simple ASCII commands are used to communicate with the module.
All digital I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
All analog inputs, +5 vdc, + unregulated, and - unregulated are supplied through a DB 15 connector.
PCB FR4
Dimensions 4.375” x 3.3” x 1.24” (5.62” at flange) (111.1 mm x 84.1 mm x 31.6 mm [142.9 mm at flange])
Weight 8 ounces
485M300CT
INTERFACE
RS485 INTERFACE DATA MODULE
16 DIGITAL I/O
The 485M300CT offers sixteen digital TTL I/O that are individually selectable as input or outputs. Simple ASCII commands are used
to communicate with the module.
Packet addressing identifies the address of the sending unit and the receiving unit. Command and response is in the packet ad-
dressing.
All I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
Enclosure None
PCB FR4
Weight 5 ounces
MPU Clock 14.7456 mHz
485M300CE
INTERFACE
RS485 INTERFACE DATA MODULE
16 DIGITAL I/O
The 485M300CE offers sixteen digital TTL I/O that are individually selectable as input or outputs. Simple ASCII commands are used
to communicate with the module.
Packet addressing identifies the address of the sending unit and the receiving unit. Command and response is in the packet ad-
dressing.
All I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
PCB FR4
Dimensions 4.375” x 3.3” x 1.24” (5.62” at flange) (111.1 mm x 84.1 mm x 31.6 mm [142.9 mm at flange])
Weight 8 ounces
MPU Clock 14.7456 mHz
485M3A0CT
INTERFACE
RS485 INTERFACE DATA MODULE
16 DIGITAL I/O
8 CHANNELS A TO D
The 485M3A0CT offers sixteen digital TTL I/O that are individually selectable as input or outputs. There are 8 channels of 12 bit A to
D conversion provided. Simple ASCII commands are used to communicate with the module.
Packet addressing identifies the address of the sending unit and the receiving unit. Command and response is in the packet ad-
dressing.
All digital I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
All analog inputs, +5 vdc, + unregulated, and - unregulated are supplied through a DB 15 connector.
Enclosure None
PCB FR4
485M3A0CE
INTERFACE
RS485 INTERFACE DATA MODULE
16 DIGITAL I/O
8 CHANNELS A TO D
The 485M3A0CE offers sixteen digital TTL I/O that are individually selectable as input or outputs. There are 8 channels of 12 bit A to
D conversion provided. Simple ASCII commands are used to communicate with the module.
Packet addressing identifies the address of the sending unit and the receiving unit. Command and response is in the packet ad-
dressing.
All digital I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
All analog inputs, +5 vdc, + unregulated, and - unregulated are supplied through a DB 15 connector.
PCB FR4
Dimensions 4.375” x 3.3” x 1.24” (5.62” at flange) (111.1 mm x 84.1 mm x 31.6 mm [142.9 mm at flange])
Weight 8 ounces
485M3ADCT
INTERFACE
RS485 INTERFACE DATA MODULE
16 DIGITAL I/O
8 CHANNELS A TO D INPUTS
2 CHANNELS D TO A OUTPUTS
The 485M3ADCT offers sixteen digital TTL I/O that are individually selectable as input or outputs. There are 8 channels of 12 bit A to
D conversion, and 2 channels of D to A outputs. provided. Simple ASCII commands are used to communicate with the module.
Packet addressing identifies the address of the sending unit and the receiving unit. Command and response is in the packet ad-
dressing.
All digital I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
All analog inputs, +5 vdc, + unregulated, and - unregulated are supplied through a DB 15 connector.
Enclosure None
PCB FR4
485M3ADCE
RS485 INTERFACE DATA MODULE
16 DIGITAL I/O
8 CHANNELS A TO D INPUTS
2 CHANNELS D TO A OUTPUTS
The 485M3ADCE offers sixteen digital TTL I/O that are individually selectable as input or outputs. There are 8 channels of 12 bit A
to D conversion, and 2 channels of D to A outputs. provided. Simple ASCII commands are used to communicate with the module.
Packet addressing identifies the address of the sending unit and the receiving unit. Command and response is in the packet ad-
dressing.
All digital I/O, +5 vdc and unregulated power are supplied through a DB 25 female connector.
All analog inputs, +5 vdc, + unregulated, and - unregulated are supplied through a DB 15 connector.
PCB FR4
Dimensions 4.375” x 3.3” x 1.24” (5.62” at flange) (111.1 mm x 84.1 mm x 31.6 mm [142.9 mm at flange])
Weight 8 ounces
RCE-1
REMOTE CONTACT EXTENDER
INTERFACE
OPEN UNIT NO ENCLOSURE
The Integrity Instruments RCE-1 allows the user to monitor contact status at one location, and send these signals to a remote loca-
tion. The system is bi-directional allowing contact status at the remote location to be sent back to the other end. Up to 8 inputs at
each end can be sent as outputs to the other end. The uniqueness is that this is done over a single set of twisted pair wires using rs-
485 communications.
The RCE-1 system consists of a master slave set. Power to each unit is supplied from the area it is at. When the units are powered
a communication protocol is maintained between the units. Similar to a “watch dog” operation the units send information to each
other. When an input is sensed at one end, this information is sent to the opposite end and a corresponding output is acti-
vated at the other end. If communication is lost, all outputs at both ends are de-activated.
Applications:
PCB FR4
Dimensions 4.375” x 3.3” x 1.24” (5.62” at flange) (111.1 mm x 84.1 mm x 31.6 mm [142.9 mm at flange])
Weight 8 ounces
MPU Clock 14.7456 mHz
RCE-1E
REMOTE CONTACT EXTENDER
INTERFACE
WITH ENCLSOURE
The Integrity Instruments RCE-1E allows the user to monitor contact status at one location, and send these signals to a remote loca-
tion. The system is bi-directional allowing contact status at the remote location to be sent back to the other end. Up to 8 inputs at
each end can be sent as outputs to the other end. The uniqueness is that this is done over a single set of twisted pair wires using rs-
485 communications.
The RCE-1E system consists of a master slave set. Power to each unit is supplied from the area it is at. When the units are powered
a communication protocol is maintained between the units. Similar to a “watch dog” operation the units send information to each
other. When an input is sensed at one end, this information is sent to the opposite end and a corresponding output is acti-
vated at the other end. If communication is lost, all outputs at both ends are de-activated.
Applications:
PCB FR4
Dimensions 4.375” x 3.3” x 1.24” (5.62” at flange) (111.1 mm x 84.1 mm x 31.6 mm [142.9 mm at flange])
Weight 8 ounces
MPU Clock 14.7456 mHz
INTERFACE CONVERTERS
Gender changer G25M9F
Features
• G25M9F DB25 male to DB9 female adapter plug.
• G9M DB9 male to DB9 male low profile connector.
• G9F DB9 female to DB9 female low profile connector.
• G25M DB25 male to DB25 male low profile connector.
• G25F DB25 female to DB25 female low profile connector.
Power supplies
INTERFACE CONVERTERS
The PS9J is a 9VDC 400 ma, 2.5 mm O.D. center positive AC/DC transformer which provides DC power source requirements for
our data acquisition and interface converter products.
The PS9CST is a 9VDC 400 ma AC/DC transformer with cut stripped and tinned leads which provides DC power source require-
ments for our interface converter products.
485–PLG module
While the 485-PLG is not required for operation of the Integrity Instruments 485 products, this handy device make RS485 wiring a
SNAP!
Note: RJ-11 connection requires a 6-4 modular plug and 4 conductor telephone cable.
INTERFACEACCESSORIES
CONVERTERS
Integrity Instruments Incorporated
2642 20th Ave. S.W. Pine River, MN 56474 phone 218-587-3175
www.integrityusa.com support@integrityusa.com
DATA ACQUISITION
The Integrity Instruments EXP-XXX expander board is designed to accept the industry standard footprint AC or DC I/O modules pro-
duced by companies such as WRC Akron, Gordos, Opto22, and more. The EXP-x digital I/O module mounting board is designed as
an I/O port expander board utilized in conjunction with Integrity Instruments remote serial data acquisition and digital I/O modules.
The expander board is available in two models: the EXP–STA and the EXP-TRK. The EXP-TRK model fits in a 3” SNAP TRACK™
vinyl-mounting track, while the EXP-STA model ships with 1/2" standoffs installed for direct panel mounting. Both models come with
“real” 5 mm x 20 mm fuses. The expander boards unique design allows for no hassle digital I/O module expansion. Connecting a
single EXP-x I/O module expander board and instantaneously control 4 I/O lines, plug in 3 more and control a total of 16 digital I/O
lines! Additionally, the EXP-XXX I/O module expander boards versatility used in conjunction with the Integrity Instruments DB25TSF
terminal strip board, your digital I/O lines can be adapted to operate with most I/O controllers on the market today!
The mounting track is available in 6 inch increments. One 6 inch sections holds one EXP-TRK board.
DB25TSME
We have designed and manufactured the and DB25TSME to address the growing requirements for customizable DB25 connectors
and thereby saving time on field wiring maintenance and installations. The DB25TSME allows the complete pin customization of a
DB25 male connector. The DB25TSME utilizes screw clamp type terminal blocks to fasten the conductors securely without the has-
sles of other D-Subminiature connector customization kits. Your 25 pin connectors will be customized in the matter of seconds with-
out the requirement of soldering a single connection!
AE-8CH
The Integrity Instruments AE-8CH 8 channel Analog Expander board is designed to operate with our line of data acquisition mod-
ules. A DB15 connector mates with the module supplying power and signal paths which are available at a convenient terminal strip.
DATA ACQUISITION
Plus and minus 5 vdc, as well as plus and minus unregulated voltages are also provided at a terminal strip for external signal condi-
tioning and use if required. MTA .100 jacks are also available for solid state temperature probes. The AE-8CH has jumpers offering
a variety of input possibilities and combinations.
When dealing with our 232M200 series modules, use AE-8CH-2m module.
ASC-2CH
The Integrity Instruments ASC-2CH Analog Signal Conditioner board is designed to operate with our line of data acquisition mod-
ules. A DB15 connector mates with the module supplying power and signal paths which are available at a convenient terminal strip.
Plus and minus 5 vdc, as well as plus and minus unregulated voltages are also provided at a terminal strip for external signal condi-
When dealing with our 232M200 series modules, use ASC-2CH-2m module.
PRICE LIST USD PRICE LIST USD
XP422-9A $65.00 232M200CT $70.00
XP422-9I $90.00 232M200CE $85.00
XP422-25A $65.00 232M2A0CT $99.00
XP422-25I $90.00 232M2A0CE $114.00
XP422-DA $95.00 232M2ADCT $140.00
XP422-DI $132.00 232M2ADCE $155.00
XP485-9E $78.00 232M200LT $92.00
XP485-9EI $120.00 232M200LE $107.00
XP485-25E $78.00 232M2A0LT $135.00
XP485-25EI $120.00 232M2A0LE $150.00
XP852-DE $105.00 232M2ADLT $180.00
XP485-DEI $134.00 232M2ADLE $195.00
TTL-25A $41.75 232M300CT $95.00
TTL-25AL $46.75 232M300CE $110.00
485-ADR $220.00 232M3A0CT $160.00
USB232-9 $39.00 232M3A0CE $175.00
232M3ADCT $215.00
485-RPT $134.95 232M3ADCE $230.00
485-RPTL $174.15 232M300LT $120.00
232OPT1 $123.50 232M300LE $135.00
232OPT1L $136.00 232M3A0LT $225.00
232M3A0LE $240.00
232M3ADLT $290.00
232M300CE 232M3ADLE $305.00
485M300CT $100.00
485M300CE $115.00
232 = RS-232 485M3A0CT $165.00
485 = RS-485 485M3A0CE $180.00
USB = Universal Bus 485M3ADCT $220.00
Series M2 or M3
485M3ADCE $235.00
485M300LT $130.00
A = A/D Interface 485M300LE $145.00
0 = No A/D 485M3A0LT $235.00
D = D/A Interface 485M3A0LE $250.00
0 = No D/A 485M3ADLT $300.00
C = 0 to 70 C 485M3ADLE $315.00
L = -40 to 85 C
RCE-1 $190.00
E = Enclosure
RCE-1E $220.00
T = No Enclosure
PRICE LIST USD PRICE LIST USD
G25F $3.25
G25M $3.25
G9F $2.50
G9M $2.50
G25M9F $2.80
C25M9F-6 $5.00
G25M25F-6 $5.00
C25M9F-6 $5.00
PS9J $9.95
PS9CST $9.95
485-PLG $9.95
EXP-STA $27.00
EXP-TRK $27.00
1781-1A5S $9.50
1781-1B5S $9.50
1781-OA5S $9.50
1781-OB5S $9.50
T6 $3.50
T12 $5.50
T18 $7.75
T24 $9.75
T30 $11.75
T36 $14.00
T42 $16.00
T48 $18.00
TKAD $2.25
DB25TSME $32.00
DB25TSM $18.00
DB25TSF $18.00
DB25TS-U $14.00
DB15TSM $14.00
AE-8CH $55.00
AE-8CH-2M $55.00
ASC-2CH $85.00
ASC-2CH-2M $85.00