Beruflich Dokumente
Kultur Dokumente
A full family of flowmeters (electromagnetic, mass, positive displacement and turbine) is available. The product line extends from basic flowmeters to computer-based blending systems. SANITARY FLOWMETER SELECTION GUIDE Recommended Limited Applicability Not Recommended
FLOWMETER TYPE ELECTROMAGNETIC MASS POSITIVE TURBINE DISPLACEMENT VORTEX
SERIES
IZMS
IZX
AM
RZ
HM
CLEAR NON-VISCOUS
LIQUID w/PARTICULATES
VISCOUS LIQUID
CORROSIVE
SLURRIES
HIGH TEMPERATURE
HIGH PRESSURE
NON CONDUCTIVE
CONDUCTIVE
CIP
SIZES AVAILABLE
5/8" to 4"
1/10" to 4"
1/8" to 3"
3/4" to 3"
3/4" to 2"
2" TO 3"
ACCURACY %
+0.25
+0.25
+0.2
+0.15
+0.5
+0.5
REPEATABILITY
+0.1
+0.1
+0.05
+0.05
+0.1
+0.2
RANGEABILITY
10 to 1
10 to 1
10 to 1
10 to 1
10 to 1
10 to 1
VISCOSITY EFFECTS
None
None
None
Low
High
High
PRESSURE DROP
Low
Low
High
High
Medium
Medium
RELATIVE COST
Medium
Medium
High
Medium
Low
Low
INSTALLATION
Medium
Medium
High
Medium
Low
Low
10
MAINTENANCE
Low
Low
Low
Low
Low
Low
OUTPUT * = optional
Pulse *Analog
Pulse *Analog
CONNECTIONS
Clamp
Clamp
Clamp
Clamp
Clamp
Turbine Meter
A turbine meter measures clear non-viscous liquids. Each revolution of an internal rotor equates to a volume of liquid. Available in four sizes.
Electromagnetic
An electromagnetic meter measures conductive fluids and slurries. Volumetric measurement accuracy is unaffected by suspended solids. Available in four sizes.
Positive Displacement
A positive displacement meter measures volume. As liquid flows through the measuring chamber, it causes the piston to rotate. Available in four sizes.
Mass
A mass meter measures weight / mass based products. The Coriolis type mass flowmeter features a vibrating tube. Sized on application. The ACCU-MASS is a direct reading mass (pounds) flowmeter. Single tube design provides true sanitary construction and full Clean-In-Place capability. With no moving parts, the ACCU-MASS provides accurate and reliable performance. Direct mass measurement is unaffected by variations in product density, temperature, viscosity, or suspended solids. Four sizes available in sanitary design. D sensors, Elite sensors, and Basis sensors are priced on application.
Sanitary Design
Accurate Metering Systems, Inc. sanitary flowmeters all carry the 3-A symbol to ensure all product contact surfaces can be mechanically cleaned (CIP) or can be dismantled easily for manual cleaning. The 3-A symbol, which is part of a 50-year old program of voluntary consensus for the dairy and food industry end-users, offers numerous advantages. Processors know they are in compliance with applicable sanitary codes for equipment construction. They are also assured that with equipment meeting 3-A Sanitary Standards, they can apply the most modern cleaning and sanitizing methods, materials, and systems to in-plant operations. The increased efficiency in equipment cleaning means lower cleaning costs, especially savings in labor. Inspection will present fewer problems when equipment companies comply with the 3-A Sanitary Standards.