0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
11 Ansichten2 Seiten
This document summarizes test results for electrical equipment. Key details include:
- The equipment tested was a 2000x600x600mm general board for Bembos Aviacion operating at 380 volts.
- Tests performed on the equipment found that components like circuit breakers, current transformers, and wiring were functioning properly. Insulation measurements were also within normal ranges.
- The tests were performed on December 10, 2010 in Lima, Peru using various measurement devices. The equipment passed all tests performed.
This document summarizes test results for electrical equipment. Key details include:
- The equipment tested was a 2000x600x600mm general board for Bembos Aviacion operating at 380 volts.
- Tests performed on the equipment found that components like circuit breakers, current transformers, and wiring were functioning properly. Insulation measurements were also within normal ranges.
- The tests were performed on December 10, 2010 in Lima, Peru using various measurement devices. The equipment passed all tests performed.
This document summarizes test results for electrical equipment. Key details include:
- The equipment tested was a 2000x600x600mm general board for Bembos Aviacion operating at 380 volts.
- Tests performed on the equipment found that components like circuit breakers, current transformers, and wiring were functioning properly. Insulation measurements were also within normal ranges.
- The tests were performed on December 10, 2010 in Lima, Peru using various measurement devices. The equipment passed all tests performed.
WORK : BEMBOS AVIACION EQUIPMENT DATA Amprobe Analog Measurer NAME 1 GENERAL BOARD TG 1 OPERATING VOLTAGE 380 VOLTS SELF-SUPPORTED TYPE 1___ 1 YEAR 1 2010____1 DIMENSIONS: 1 2000X600X600MM 1 PHASES 1 3F+N + TI
EQUIPMENT STATUS FUNCTION.
01 THERMOMAGNETIC CIRCUIT BREAKER 3X630 AMPS 85KA 220 VOLTS OK OK 01 PM710 NETWORK ANALYZER OK OK 03 SIGNALING LAMPS 220V OK OK 03 600/5AMP CURRENT TRANSFORMERS OK OK 06 FUSE HOLDER 1 POLE 32AMP, WITH FUSE SIZE 10x38 OK OK 01 SET OF TERMINAL BLOCKS, WIRING ETC. OK OK
TESTS PERFORMED RESULT )
MECHANICALS *MECHANICAL OPERATION OF EQUIPMENT OK *VERIFICATION OF QUANTITY AND CAPACITY OF THE EQUIPMENT OK *VERIFICATION OF THE PAINT FINISH OF THE BOARD OK *DASHBOARD DOOR LOCKING OK *VERIFICATION OF BOLT TIGHTNESS OK ELECTRICAL *CONTINUITY OF LINES OK *CONTROL CIRCUIT OPERABILITY OK *VISUAL SIGNAGE OK *SIMULATION OF THE REGULATOR'S OPERATION OK