Beruflich Dokumente
Kultur Dokumente
0.000000]
<5>[
0.000000]
rsion 4.4.0 (GCC)
<4>[
0.000000]
f
<4>[
0.000000]
cache
<4>[
0.000000]
<4>[
0.000000]
<7>[
0.000000]
<7>[
0.000000]
0000
<7>[
0.000000]
<7>[
0.000000]
<7>[
0.000000]
<7>[
0.000000]
<7>[
0.000000]
2000
<7>[
0.000000]
<7>[
0.000000]
<7>[
0.000000]
<7>[
0.000000]
<7>[
0.000000]
1000
<7>[
0.000000]
<7>[
0.000000]
<7>[
0.000000]
<7>[
0.000000]
<7>[
0.000000]
8c20
<4>[
0.000000]
<4>[
0.000000]
<7>[
0.000000]
<6>[
0.000000]
<7>[
0.000000]
<7>[
0.000000]
<7>[
0.000000]
<6>[
0.000000]
54000000
<6>[
0.000000]
<6>[
0.000000]
00
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
ad3000
<6>[
0.000000]
204000
<6>[
0.000000]
42204000
<6>[
0.000000]
42e04000
<6>[
0.000000]
437af000
<6>[
0.000000]
ad3000
<6>[
0.000000]
3af000
<4>[
0.000000]
pages: 117602
<5>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
)
<6>[
0.000000]
<6>[
0.000000]
<5>[
0.000000]
m
<5>[
0.000000]
<5>[
0.000000]
<5>[
0.000000]
<5>[
0.000000]
<5>[
0.000000]
<5>[
0.000000]
<5>[
0.000000]
<5>[
0.000000]
<5>[
0.000000]
<5>[
0.000000]
<6>[
0.000000]
Nodes=4
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<6>[
0.000000]
<4>[
0.000000]
CPUs is disabled.
is disabled.
0x41
0x41
0x41
0x41
<6>[
0.000000] console [ttySAC2] enabled
<6>[
0.000315] Calibrating delay loop... 796.20 BogoMIPS (lpj=1556480)
<6>[
0.081957] pid_max: default: 32768 minimum: 301
<4>[
0.082026] Mount-cache hash table entries: 512
<6>[
0.082361] Initializing cgroup subsys debug
<6>[
0.082377] Initializing cgroup subsys cpuacct
<6>[
0.082388] Initializing cgroup subsys freezer
<6>[
0.082419] CPU: Testing write buffer coherency: ok
<6>[
0.084968] regulator: core version 0.5
<6>[
0.085132] NET: Registered protocol family 16
<6>[
0.092873] console [ttyFIQ0] enabled
<6>[
0.092979] Registered FIQ tty driver c4c1b3c0
<6>[
0.096080] ram_console: got buffer at 57f00000, size ff000
<6>[
0.096227] ram_console: found existing buffer, size 27873, start 27873
<6>[
0.157878] console [ram-1] enabled
<6>[
0.157991] S5PC110 Hardware version : EVT1
<6>[
0.160811] HWREV is 0xe
<4>[
0.163806] S3C Power Management, Copyright 2004 Simtec Electronics
<6>[
0.169630] pmstats at 57fff000
<6>[
0.173877] S5PV210: Initializing architecture
<6>[
0.177442] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000,
tin=divclk, base 0
<6>[
0.185619] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000,
tin=divclk, base 8
<6>[
0.194021] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000,
tin=divclk, base 12
<6>[
0.202512] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000,
tin=divclk, base 16
<6>[
0.211092] regulator: pd_audio_supply: 5000 mV normal
<6>[
0.216284] regulator: pd_cam_supply: 5000 mV normal
<6>[
0.221239] regulator: pd_tv_supply: 5000 mV normal
<6>[
0.226244] regulator: pd_lcd_supply: 5000 mV normal
<6>[
0.231191] regulator: pd_g3d_supply: 5000 mV normal
<6>[
0.236299] regulator: pd_mfc_supply: 5000 mV normal
<4>[
0.247054] bio: create slab <bio-0> at 0
<5>[
0.250378] SCSI subsystem initialized
<6>[
0.253934] i2c-gpio i2c-gpio.4: using pins 247 (SDA) and 246 (SCL)
<6>[
0.259841] i2c-gpio i2c-gpio.5: using pins 203 (SDA) and 204 (SCL)
<6>[
0.267316] regulator: VALIVE_1.2V: 1200 mV
<6>[
0.270800] regulator: VUSB_1.1V: 1100 mV
<6>[
0.275423] regulator: VADC_3.3V: 3300 mV
<6>[
0.278954] regulator: VTF_2.8V: 2800 mV
<6>[
0.282932] regulator: VLCD_1.8V: 1800 mV
<6>[
0.287086] regulator: VUSB_3.3V: 3300 mV
<6>[
0.291542] regulator: VCC_2.8V_PDA: 2800 mV
<6>[
0.295410] regulator: CAM_AF_3.0V: 3000 mV
<6>[
0.299747] regulator: CAM_SENSOR_CORE_1.2V: 1200 mV
<6>[
0.304700] regulator: VGA_VDDIO_2.8V: 2800 mV
<6>[
0.309278] regulator: VGA_DVDD_1.8V: 1800 mV
<6>[
0.313617] regulator: CAM_ISP_HOST_2.8V: 2800 mV
<6>[
0.318385] regulator: VGA_AVDD_2.8V: 2800 mV
<6>[
0.322890] regulator: VCC_3.0V_LCD: 3000 mV
<6>[
0.326939] regulator: VDD_ARM: 750 <--> 1500 mV at 1200 mV
<6>[
0.332655] regulator: VDD_INT: 750 <--> 1500 mV at 1100 mV
<6>[
0.338860] regulator: VCC_1.8V: 1800 mV
<6>[
0.342384] regulator: CAM_ISP_CORE_1.2V: 1200 mV
<6>[
0.348389] i2c-gpio i2c-gpio.6: using pins 206 (SDA) and 209 (SCL)
<6>[
0.353482] i2c-gpio i2c-gpio.7: using pins 201 (SDA) and 202 (SCL)
<6>[
0.359795] i2c-gpio i2c-gpio.8: using pins 42 (SDA) and 43 (SCL)
<6>[
0.365864] i2c-gpio i2c-gpio.9: using pins 245 (SDA) and 244 (SCL)
<6>[
0.372025]
<6>[
0.378359]
<6>[
0.384584]
<6>[
0.391041]
<6>[
0.396238]
<6>[
0.401766]
<6>[
0.407204]
<6>[
0.413692]
<6>[
0.416775]
<6>[
0.421128]
<6>[
0.427533]
<6>[
0.432449]
<6>[
0.444462]
<6>[
0.447649]
)
<6>[
0.455210]
tes)
<6>[
0.461966]
<6>[
0.468642]
<6>[
0.474736]
<6>[
0.477776]
<6>[
0.483771]
<6>[
0.490150]
<6>[
0.656704]
<6>[
0.658964]
<4>[
0.663217]
<6>[
0.665620]
<6>[
0.671584]
<6>[
0.676076]
<6>[
0.682307]
<6>[
0.687077]
<6>[
0.693307]
<6>[
0.698081]
<6>[
0.705544]
<6>[
0.707611]
<7>[
0.711577]
<6>[
0.717051]
<6>[
0.723669]
<6>[
0.726508]
<6>[
0.730332]
<6>[
0.734556]
<6>[
0.740519]
05dc000
<6>[
0.752236]
05dc000
<6>[
0.765831]
<6>[
0.769785]
<6>[
0.816899]
<4>[
0.821460]
<4>[
0.825099]
<4>[
0.831237]
= 0
<4>[
0.838422]
<4>[
0.841129]
<4>[
0.848046]
<4>[
0.854806]
<6>[
0.861919]
is a S3C6400/10
<6>[
0.870051]
is a S3C6400/10
PAddr=44526000 size=1536000
PAddr=4469d000 size=1536000
PAddr=44814000 size=1536000
MMIO 0xe2900000 (irq = 16)
<6>[
0.878122] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28)
is a S3C6400/10
<6>[
0.890570] brd: module loaded
<6>[
0.893330] loop: module loaded
<6>[
0.893574] Android kernel panic handler initialized (bind=kpanic)
<6>[
0.893729] Loading pn544 driver
<6>[
0.894059] sec_jack_probe : Registering jack driver
<6>[
0.894487] wake enabled for irq 38
<6>[
0.894616] sec_jack_init_jack_state
<6>[
0.894826] sec_jack_set_micbias_state: HWREV=14, on=1
<6>[
0.895088] handle_jack_not_inserted
<6>[
0.895220] sec_jack_set_micbias_state: HWREV=14, on=0
<6>[
0.896879] wake enabled for irq 167
<6>[
0.897425] fsa9480 7-0025: dev1: 0x0, dev2: 0x0
<4>[
0.897612] [modemctl_init]
<4>[
0.897784] [modemctl_probe]
<6>[
0.898074] wake enabled for irq 47
<6>[
0.898236] wake enabled for irq 171
<4>[
0.898484] [onedram_init]
<4>[
0.898666] [onedram_probe]
<6>[
0.899188] wake enabled for irq 43
<4>[
0.899506] [svnet_init]
<6>[
0.900524] modemctl xmm: PHONE ACTIVE: 0
<6>[
0.901450] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
<6>[
0.901592] OneNAND version = 0x013e
<7>[
0.901803] Chip support all block unlock
<7>[
0.901935] Chip has 4KiB pagesize
<6>[
0.902077] Scanning device for bad blocks
<4>[
2.618588] Bad eraseblock 2047 at 0x1ffc0000
<5>[
2.618728] Creating 8 MTD partitions on "(null)":
<5>[
2.618953] 0x000001200000-0x000001980000 : "boot"
<5>[
2.619959] 0x000001980000-0x000002100000 : "recovery"
<5>[
2.620875] 0x000002100000-0x00000dc80000 : "system"
<5>[
2.623851] 0x00000dc80000-0x000012c80000 : "cache"
<5>[
2.625410] 0x00001d880000-0x00001e500000 : "efs"
<5>[
2.626519] 0x00001e500000-0x00001f500000 : "radio"
<5>[
2.627444] 0x000012c80000-0x00001d880000 : "datadata"
<5>[
2.629819] 0x00001f500000-0x000020000000 : "reservoir"
<6>[
2.789473] tl2796_probe successfully proved
<6>[
2.789806] PPP generic driver version 2.4.2
<6>[
2.790171] PPP Deflate Compression module registered
<6>[
2.790314] PPP BSD Compression module registered
<6>[
2.791349] PPP MPPE Compression module registered
<6>[
2.791493] NET: Registered protocol family 24
<6>[
2.793525] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 S
amsung Electronics
<6>[
2.793535] s3c-udc : version 15 March 2009 (DMA Mode)
<6>[
2.793993] android init
<6>[
2.794153] android_probe pdata: c0927c80
<6>[
2.794356] android_bind
<7>[
2.794477] android_bind_config
<6>[
2.794831] android_usb gadget: android_usb ready
<7>[
2.811011] Registered gadget driver 'android_usb'
<6>[
2.811289] f_adb init
<6>[
2.811408] android_register_function adb
<6>[
2.811539] f_mass_storage init
<6>[
2.811710] fsg_probe pdev: c0927020, pdata: c0927ca4
<6>[
2.811978] android_register_function usb_mass_storage
<6>[
2.812118] f_rndis init
<6>[
2.812326] android_register_function rndis
<6>[
2.812543] rndis_function_bind_config MAC: 02:06:3C:37:30:44
<4>[
2.812706] android_usb gadget: using random self ethernet address
<4>[
2.812968] android_usb gadget: using random host ethernet address
<6>[
2.814031] usb0: MAC 5e:08:f9:d2:11:f3
<6>[
2.814245] usb0: HOST MAC f2:0d:94:d6:2b:a8
<6>[
2.814625] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[
2.814865] android_usb gadget: Number of LUNs=2
<6>[
2.815003] lun0: LUN: removable file: (no medium)
<6>[
2.815225] lun1: LUN: removable file: (no medium)
<6>[
2.815439] adb_bind_config
<6>[
2.815823] f_accessory init
<6>[
2.816028] android_register_function accessory
<6>[
2.816350] mice: PS/2 mouse device common for all mice
<6>[
2.816849] input: mxt224_ts_input as /devices/virtual/input/input0
<6>[
2.857841] Atmel MXT224 2-004a: family = 0x80, variant = 0x1, version = 0
x16, build = 171
<6>[
2.934518] bma023 5-0038: bma023 found
<6>[
2.935175] bma023 5-0038: al_version=2, ml_version=1
<6>[
2.958578] input: accelerometer_sensor as /devices/virtual/input/input1
<6>[
2.959293] input: magnetic_sensor as /devices/virtual/input/input2
<6>[
2.959846] input: raw_magnetic_sensor as /devices/virtual/input/input3
<3>[
2.965907] yas529 12-002e: [init] 0 DeviceID is 80 40
<6>[
2.980217] input: orientation_sensor as /devices/virtual/input/input4
<6>[
2.980647] wake enabled for irq 166
<6>[
2.980913] wake enabled for irq 173
<6>[
2.981069] wake enabled for irq 169
<6>[
2.981222] wake enabled for irq 170
<6>[
2.981351] GPIO Input Driver: Start gpio inputs for aries-keypad in inter
rupt mode
<6>[
2.981797] input: aries-keypad as /devices/virtual/input/input5
<6>[
2.982716] input: proximity_sensor as /devices/virtual/input/input6
<6>[
2.983244] input: light_sensor as /devices/virtual/input/input7
<4>[
2.984054] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
<6>[
2.984969] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>[
2.985465] using rtc device, s3c, for alarms
<6>[
2.985627] s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
<6>[
2.986020] i2c /dev entries driver
<6>[
2.987434] Linux video capture interface: v2.00
<6>[
2.987731] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
<6>[
2.987739]
<6>[
2.988499] S3C JPEG Driver, (c) 2007 Samsung Electronics
<6>[
2.988765] JPEG driver for S5PV210
<7>[
2.988939] s3c_jpg_plat_init: Resolution: Main ( 800 x 480), Thumb ( 320
x 240)
<7>[
2.989187] s3c_jpg_plat_init: JPG Stream: Main(385024 bytes @ 0x0), Thumb
(77824 bytes @ 0x5e000)
<7>[
2.989359] s3c_jpg_plat_init: YUV frame: Main(770048 bytes @ 0x71000), Th
umb(155648 bytes @ 0x12d000)
<7>[
2.989628] s3c_jpg_plat_init: Total buffer size : 1388544 bytes
<7>[
2.989985] s3c_jpeg_probe: JPG_Init
<6>[
3.000211] max17040 9-0036: MAX17040 Fuel-Gauge Ver 02
<6>[
3.000741] device-mapper: uevent: version 1.0.3
<6>[
3.001226] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: d
m-devel@redhat.com
<6>[
3.001489] Bluetooth: HCI UART driver ver 2.2
<6>[
3.001625] Bluetooth: HCI H4 protocol initialized
<6>[
3.001900] cpuidle: using governor ladder
<6>[
3.002195] cpuidle: using governor menu
<6>[
3.002368] sdhci: Secure Digital Host Controller Interface driver
<6>[
3.002598] sdhci: Copyright(c) Pierre Ossman
<6>[
3.002857]
<6>[
3.003105]
<6>[
3.003274]
<6>[
3.004532]
MA
<6>[
3.004747]
<6>[
3.004995]
<6>[
3.005244]
<6>[
3.005560]
MA
<6>[
3.005856]
<6>[
3.006022]
<6>[
3.006271]
<7>[
3.006525]
<7>[
3.006667]
<6>[
3.006934]
MA
<6>[
3.007802]
<6>[
3.008030]
<6>[
3.008372]
<6>[
3.008594]
<4>[
3.009134]
<6>[
3.009674]
<6>[
3.009840]
<6>[
3.023877]
<6>[
3.024033]
led in Sleep Mode
<6>[
3.024042]
<6>[
3.025257]
bytes
<6>[
3.025795]
<3>[
3.025982]
<4>[
3.026209]
<4>[
3.026346]
<6>[
3.034392]
<6>[
3.034520]
<6>[
3.034674]
<6>[
3.034893]
<6>[
3.035022]
<6>[
3.035140]
<6>[
3.035267]
<6>[
3.035562]
<4>[
3.035910]
se use
<4>[
3.036151]
le option or
<4>[
3.036397]
<6>[
3.037228]
<6>[
3.037594]
<6>[
3.040084]
<6>[
3.040429]
<6>[
3.040645]
<6>[
3.040805]
<6>[
3.042925]
<6>[
3.049228]
<6>[
3.049351]
<6>[
3.051277]
<6>[
3.054497]
<6>[
3.056127]
<6>[
3.056377]
s3c-sdhci s3c-sdhci.0:
s3c-sdhci s3c-sdhci.0:
s3c-sdhci s3c-sdhci.0:
mmc0: SDHCI controller
s3c-sdhci s3c-sdhci.1:
s3c-sdhci s3c-sdhci.1:
s3c-sdhci s3c-sdhci.1:
mmc1: SDHCI controller
<6>[
3.056642] Bluetooth: L2CAP ver 2.14
<6>[
3.056770] Bluetooth: L2CAP socket layer initialized
<6>[
3.057001] Bluetooth: SCO (Voice Link) ver 0.6
<6>[
3.057153] Bluetooth: SCO socket layer initialized
<6>[
3.057457] Bluetooth: RFCOMM TTY layer initialized
<6>[
3.057606] Bluetooth: RFCOMM socket layer initialized
<6>[
3.057828] Bluetooth: RFCOMM ver 1.11
<6>[
3.057958] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[
3.058100] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[
3.058433] NET: Registered protocol family 35
<6>[
3.058632] ThumbEE CPU extension supported.
<6>[
3.059666] S5PV210 CPUFREQ Initialising...
<6>[
3.060120] s5pv210_cpufreq_init: S5PV210 cpu-freq driver
<6>[
3.060347] VFP support v0.3: implementor 41 architecture 3 part 30 varian
t c rev 2
<6>[
3.064045] regulator_init_complete: disabling pd_mfc_supply
<6>[
3.064283] regulator_init_complete: disabling pd_tv_supply
<6>[
3.064430] regulator_init_complete: disabling pd_cam_supply
<6>[
3.064969] input: cypress-touchkey as /devices/virtual/input/input8
<6>[
3.094914] cypress_touchkey_driver 10-0020: cypress_touchkey_probe: hardw
are rev1 = 0xa9, rev2 = 0x3
<6>[
3.096260] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>[
3.096728] s3c-rtc s3c2410-rtc: setting system clock to 2011-10-09 03:40:
56 UTC (1318131656)
<6>[
3.098879] FIMC0 registered successfully
<6>[
3.100792] FIMC1 registered successfully
<6>[
3.102598] FIMC2 registered successfully
<6>[
3.103065] max8998_charger_probe : MAX8998 Charger Driver Loading
<6>[
3.105855] max8998_charger_probe : pmic interrupt registered
<6>[
3.107342] check_lpm_charging_mode : lpm_charging_mode(0)
<6>[
3.108879] wake enabled for irq 39
<4>[
3.109339] Warning: unable to open an initial console.
<6>[
3.110105] Freeing init memory: 744K
<6>[
3.163766] mmc0: new high speed MMC card at address 0001
<6>[
3.168435] mmcblk0: mmc0:0001 MAG8DD 15.3 GiB
<6>[
3.169008] mmcblk0: p1 p2
<7>[
3.210422] Universal : Card status 1
<6>[
5.474402] yaffs: dev is 32505858 name is "mtdblock2" rw
<6>[
5.474607] yaffs: passed flags ""
<7>[
5.474718] yaffs: Attempting MTD mount of 31.2,"mtdblock2"
<7>[
5.563837] yaffs: restored from checkpoint
<7>[
5.564187] yaffs_read_super: isCheckpointed 1
<6>[
5.565633] yaffs: dev is 32505859 name is "mtdblock3" rw
<6>[
5.565830] yaffs: passed flags ""
<7>[
5.565940] yaffs: Attempting MTD mount of 31.3,"mtdblock3"
<7>[
5.568642] yaffs: restored from checkpoint
<7>[
5.568841] yaffs_read_super: isCheckpointed 1
<7>[
5.582605] save exit: isCheckpointed 1
<7>[
5.590437] save exit: isCheckpointed 1
<6>[
5.723332] keychord: using input dev aries-keypad for fevent
<3>[
5.723754] init: cannot open '/initlogo.rle'
<6>[
5.724266] init: command 'loglevel' r=0
<6>[
5.724391] init: command 'export' r=0
<6>[
5.724576] init: command 'export' r=0
<6>[
5.724694] init: command 'export' r=0
<6>[
5.724811] init: command 'export' r=0
<6>[
5.724996] init: command 'export' r=0
<6>[
5.725113] init: command 'export' r=0
<6>[
5.725231] init: command 'export' r=0
<6>[
5.725416] init: command 'export' r=0
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<7>[
<7>[
5.725535]
5.725652]
5.725838]
5.725956]
5.726075]
5.726291]
5.726438]
5.726581]
5.726786]
5.726933]
5.727119]
5.727498]
5.727698]
5.727825]
5.728020]
5.728157]
5.728281]
5.728493]
5.728627]
5.728761]
5.728962]
5.729097]
5.729295]
5.729502]
5.729697]
5.729836]
5.730038]
5.730284]
5.730451]
5.730598]
5.730819]
5.731002]
5.731145]
5.731344]
5.731602]
5.731733]
5.731931]
5.732056]
5.732193]
5.732451]
5.732581]
5.732705]
5.732907]
5.733088]
5.733218]
5.733409]
5.733545]
5.733671]
5.733932]
5.734051]
5.734173]
5.734359]
5.734477]
5.734593]
5.734799]
5.734920]
5.735123]
5.735316]
5.735425]
5.824494]
<7>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<7>[
<7>[
<7>[
<6>[
<6>[
<6>[
<7>[
<7>[
<7>[
<6>[
<6>[
<6>[
. Opts:
<6>[
<6>[
<6>[
<7>[
<7>[
<6>[
<6>[
<6>[
<6>[
<6>[
<7>[
<7>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
'666',
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
7.166248]
7.166380]
7.166578]
7.166710]
7.166842]
7.167044]
7.167175]
7.167307]
7.167506]
7.167638]
7.167770]
7.167969]
7.168102]
7.168233]
7.168463]
7.168594]
7.168727]
7.169027]
7.169188]
7.169336]
7.169574]
7.169742]
7.169911]
7.170126]
7.170276]
7.170421]
7.170621]
7.170750]
7.170878]
7.171004]
7.171199]
7.171344]
7.171483]
7.171690]
7.171819]
7.171949]
7.172147]
7.172378]
7.172520]
7.172721]
7.172853]
7.172985]
7.173183]
7.173314]
7.173446]
7.173644]
7.173774]
7.173905]
7.174104]
7.174233]
7.174363]
7.174561]
7.174691]
7.174822]
7.175045]
7.175206]
7.175358]
7.175567]
7.175714]
7.175853]
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
init:
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
command
'setprop' r=0
'setprop' r=0
'setprop' r=0
'setprop' r=0
'setprop' r=0
'setprop' r=0
'setprop' r=0
'setprop' r=0
'setprop' r=0
'setprop' r=0
'setprop' r=0
'setprop' r=0
'setprop' r=0
'setprop' r=0
'setprop' r=0
'setprop' r=0
'setprop' r=0
'write' r=0
'write' r=0
'write' r=0
'write' r=0
'write' r=0
'write' r=0
'write' r=0
'write' r=0
'write' r=0
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=0
'chown' r=0
'chown' r=0
'chmod' r=0
'chmod' r=0
'chmod' r=0
'chown' r=0
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=-2
'chown' r=0
'chown' r=0
'chown' r=0
'chown' r=0
'chown' r=0
'chown' r=0
<6>[
7.176060] init: command 'chown' r=0
<6>[
7.176231] init: command 'chown' r=0
<6>[
7.176375] init: command 'chown' r=0
<6>[
7.176601] init: command 'setprop' r=0
<6>[
7.176755] init: command 'setprop' r=0
<6>[
7.176907] init: command 'setprop' r=0
<6>[
7.177125] init: command 'setprop' r=0
<6>[
7.177278] init: command 'setprop' r=0
<5>[
7.179752] init: starting 'pvrsrvinit'
<5>[
7.181141] init: starting 'gpsd'
<6>[
7.184799] init: Created socket '/dev/socket/gps' with mode '660', user '
1021', group '1000'
<5>[
7.203579] init: starting 'servicemanager'
<5>[
7.219580] init: starting 'vold'
<5>[
7.219916] init: starting 'netd'
<6>[
7.227537] init: Created socket '/dev/socket/vold' with mode '660', user
'0', group '1009'
<6>[
7.228093] init: Created socket '/dev/socket/dnsproxyd' with mode '660',
user '0', group '3003'
<6>[
7.228376] init: Created socket '/dev/socket/netd' with mode '660', user
'0', group '1000'
<5>[
7.256110] init: starting 'debuggerd'
<5>[
7.258771] init: starting 'ril-daemon'
<6>[
7.266784] init: Created socket '/dev/socket/rild-debug' with mode '660',
user '1001', group '1000'
<6>[
7.267074] init: Created socket '/dev/socket/rild' with mode '660', user
'0', group '1001'
<5>[
7.319640] init: starting 'zygote'
<5>[
7.323392] init: starting 'media'
<5>[
7.325972] init: starting 'dbus'
<5>[
7.327249] init: starting 'installd'
<5>[
7.327562] init: starting 'keystore'
<5>[
7.327941] init: starting 'orientationd'
<5>[
7.329569] init: starting 'geomagneticd'
<5>[
7.330859] init: starting 'tvout'
<6>[
7.331216] init: command 'class_start' r=0
<6>[
7.331406] init: processing action 0x2a1c8 (boot)
<6>[
7.331618] init: command 'mount' r=0
<6>[
7.331838] init: command 'symlink' r=0
<6>[
7.331975] init: command 'symlink' r=0
<6>[
7.332112] init: command 'symlink' r=0
<6>[
7.336774] init: Created socket '/dev/socket/zygote' with mode '666', use
r '0', group '0'
<6>[
7.337841] init: Created socket '/dev/socket/dbus' with mode '660', user
'1002', group '1002'
<6>[
7.338600] init: Created socket '/dev/socket/installd' with mode '600', u
ser '1000', group '1000'
<6>[
7.339214] init: Created socket '/dev/socket/keystore' with mode '666', u
ser '0', group '0'
<6>[
7.374241] init: command 'import' r=0
<6>[
7.374399] init: command 'import' r=-1
<3>[
7.939379] init: exec: pid 120 exited with return code 226: Unknown error
: 57869
<6>[
7.939610] init: command 'exec' r=0
<6>[
7.939964] init: waitpid returned pid 105, status = 00000000
<5>[
7.940166] init: process 'pvrsrvinit', pid 105 exited
<6>[
7.940336] init: command 'setprop' r=0
<6>[
7.940595] init: command 'setprop' r=0
<6>[
7.940730] init: command 'setprop' r=0
<6>[
7.940863] init: command 'setprop' r=0
<6>[
7.941063] init: command 'setprop' r=0
<6>[
7.941194] init: command 'setprop' r=0
<6>[
7.941327] init: command 'setprop' r=0
<6>[
7.941788] init: command 'mkdir' r=0
<6>[
7.942116] init: command 'mkdir' r=0
<6>[
7.942253] init: command 'setprop' r=0
<6>[
7.942587] init: command 'chown' r=0
<6>[
7.942768] init: command 'chown' r=0
<6>[
7.942927] init: command 'chown' r=0
<6>[
7.943153] init: command 'chown' r=0
<6>[
7.943311] init: command 'chown' r=0
<6>[
7.943481] init: command 'chmod' r=0
<6>[
7.943704] init: command 'chown' r=0
<6>[
7.943860] init: command 'chown' r=0
<6>[
7.944016] init: command 'chown' r=0
<6>[
7.944239] init: command 'chown' r=0
<6>[
7.946350] init: command 'mkdir' r=0
<6>[
7.946497] init: command 'chown' r=0
<6>[
7.946714] init: command 'chown' r=0
<6>[
7.946957] init: command 'chmod' r=0
<6>[
7.947085] init: processing action 0x2d140 (queue_propety_triggers)
<6>[
7.947313] init: command 'queue_propety_triggers' r=0
<6>[
7.947443] init: processing action 0x276f0 (property:persist.service.adb.
enable=1)
<5>[
7.947669] init: starting 'adbd'
<6>[
7.948002] init: command 'start' r=0
<6>[
7.948165] init: processing action 0x2ceb0 (property:ro.secure=0)
<3>[
7.948395] init: service 'console' requires console
<6>[
7.948518] init: command 'start' r=0
<6>[
7.971614] enabling adb
<6>[
8.000139] adb_open
<6>[
8.726319] warning: `rild' uses 32-bit capabilities (legacy support in us
e)
<6>[
9.681361] init: waitpid returned pid 120, status = 00000000
<3>[
9.681509] init: untracked pid 120 exited
<6>[ 18.375445] modemctl xmm: PHONE ACTIVE: 1
<3>[ 27.009255] gp2a: proximity val = 1
<6>[ 27.009406] wake enabled for irq 34
<6>[ 27.011238] wake disabled for irq 34
<5>[ 27.012092] init: starting 'bootanim'
<6>[ 27.012523] init: processing action 0x2b928 (property:init.svc.bootanim=ru
nning)
<5>[ 27.012787] init: starting 'bdaddr'
<6>[ 27.013071] init: command 'start' r=0
<6>[ 27.029068] init: waitpid returned pid 229, status = 00000000
<5>[ 27.029216] init: process 'bdaddr', pid 229 exited
<6>[ 58.110526] request_suspend_state: wakeup (3->0) at 58047694877 (2011-10-0
9 03:41:51.511287292 UTC)
<5>[ 60.510153] init: service 'bootanim' is being killed
<6>[ 60.514310] init: waitpid returned pid 228, status = 0000000f
<5>[ 60.514456] init: process 'bootanim', pid 228 exited
<3>[ 75.725387] binder: release proc 671, transaction 10653, not freed
<3>[ 76.203049] init: sys_prop: permission denied uid:1000 name:user.language
<3>[ 76.203342] init: sys_prop: permission denied uid:1000 name:user.region
<6>[ 121.900447] binder: release 762:762 transaction 21678 out, still active
<6>[ 121.945744] binder: 217:475 transaction failed 29189, size 4-0
<6>[ 121.945887] binder: send failed reply for transaction 21678, target dead
<6>[ 155.929286] binder: 217:490 transaction failed 29189, size 56-0
<4>[ 322.041349] wifi_set_power = 1
<4>[ 322.125253] wifi_set_carddetect = 1