Beruflich Dokumente
Kultur Dokumente
Page 1 of 5
1. Quick Setup
This is where you set up the IP addresses and SIP parameters.
1. 2. 3. 4. 5. 6. 7.
Enter the IP Address: 192.168.0.87(Ex) Enter the Subnet Mask:255.255.255.0(Ex) Enter the Default Gateway IP Address:192.168.0.2(Ex) Choose the Working with Proxy: Yes Enter the Proxy IP Address: 192.168.0.68(Ex) Enable Registration Click on [Reset] button
http://wiki.brekeke.com/wiki/printPage.php?pageID=5b8a5afe
9/15/2009
Brekeke Wiki -
Page 2 of 5
All ports of the AudioCodes gateway are registered with Brekeke SIP Server.
http://wiki.brekeke.com/wiki/printPage.php?pageID=5b8a5afe
9/15/2009
Brekeke Wiki -
Page 3 of 5
Select By Dest Phone Number when you use FXS gateway and two stage dialing Select Descending when you use one stage dialing.
3. ARS Setting
ARS is for making outgoing calls through FXO Pattern - OUT: ----------------------[Matching Patterns:] To=sip:([0-9]{7,25})@ [Deploy Patterns:] To=sip:$1@192.168.0.87 -----------------------
http://wiki.brekeke.com/wiki/printPage.php?pageID=5b8a5afe
9/15/2009
Brekeke Wiki -
Page 4 of 5
http://wiki.brekeke.com/wiki/printPage.php?pageID=5b8a5afe
9/15/2009
Brekeke Wiki -
Page 5 of 5
If the call is not immediately disconnected, please do the following steps: 1. Go to Advanced Configuration > Configuration File. 2. Click on [Get ini File], you will receive BOARD.ini file. 3. Once you open BOARD.ini file, add CURRENTDISCONNECTDURATION = 200 on the last row of the [SIP Params] field. 4. Save the BOARD.ini 5. Send the BOARD.ini file from your computer to the device.
http://wiki.brekeke.com/wiki/printPage.php?pageID=5b8a5afe
9/15/2009