Beruflich Dokumente
Kultur Dokumente
OUTPUT CURRENT UP TO 3A
LARGE COMMON-MODE AND DIFFERENTIAL
MODE RANGES
SOA PROTECTION
THERMAL PROTECTION
Pentawatt®
± 18V SUPPLY
DESCRIPTION
The L165 is a monolithic integrated circuit in
Pentawatt® package, intended for use as power
operational amplifier in a wide range of applica-
tions, including servo amplifiers and power sup-
plies. The high gain and high output power
capability provide superiore performance wherever
ORDERING NUMBER : L165V
an operational amplifier/power booster combina-
tion is required.
ABSOLUTE MAXIMUM RATINGS
Symbol Parameter Value Unit
Vs Supply voltage ± 18 V
V5 V4 Upper power transistor VCE 36 V
V4 V3 Lower power transistor VCE 36 V
Vi Input voltage Vs
Vj Differential input voltage ± 15 V
Io Peak output current (internally limited) 3.5 A
Ptot Power dissipation at Tcase = 90°C 20 W
Tstg, Tj Storage and junction temperature -40 to 150 °C
APPLICATION CIRCUITS
Figure 1. Gain > 10. Figure 2. Unity gain configuration.
SCHEMATIC DIAGRAM
THERMAL DATA
2/9
L165
Vs Supply Voltage ±6 ± 18 V
SR Slew-rate Gv = 10 8
V/µs
Gv = 1 (°) 6
f = 10 kHz Ip = 0.3 A 27
VPP
Ip = 3 A 23
3/9
L165
Figure 3. Open loop frequency response. Figure 4. Closed loop frequency response
(circuit of figure 2).
F ig ure 5. L arge si gnal fre quency Figure 6. Maximum output current vs.
response. vo ltage [VCE] across each output
transistor.
Figure 7. Safe operating area and collector Figure 8. Maximum allowable power
characteristics of the protected power dissipation vs. ambient temperature.
transistor.
4/9
L165
Figure 10. Motor current control circuit with external power transistors (Imotor > 3.5A).
D1 to D4 : VF ≤ 1.2 @ I = 4A
trr ≤ 500 ns
Note : The inputvoltage level is compatible with L291 (5-BIT D/A converter).
IM R4
The transfer function is : =
Vi Rx R3
5/9
L165
Figure 11. High current tracking regulator. Figure 12. Bidirectional speed control of DC
motor (Compensation networks not shown).
A : for ± 18 ≤ Vi ± 32
Note : Vz must be chosen in order to verify
D1, D2 : VF ≤ 1.2V @ I = 2A
2 Vi-Vz ≤ 36V
trr ≤ 500 ns
B : for Vi ≤ ± 18V
6/9
L165
Figure 14. Power squarewave oscillator with independent adjustments for frequency and duty-cycle.
P1 : duty-cycle adjust
P2 : frequency adjust (f = 700 Hz with C1 = 10 nF, P2 = 100
KΩ, f = 25 Hz with C1 = 10 nF, P2 = 0)
7/9
L165
L
E
L1
M1
A
M
D
C
D1
L2
L5 L3
G1
H3
Dia.
F
F1
L7
H2
L6
8/9
L165
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No
license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned
in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied.
SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express
written approval of SGS-THOMSON Microelectronics.
9/9