Beruflich Dokumente
Kultur Dokumente
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Welcome to
LINTECH
Our local technical support group consists of Automation Specialists located throughout the World. These Automation Specialists are experienced in the use of electronic and mechanical motion control products. They are well trained on the performance capabilities of LINTECH positioning components.
LINTECH is constantly designing new products and improving upon the many options available with our standard products. Whether it is a standard or custom positioning system required, visit our website, call, or e-mail us. We look forward to hearing from you.
Visit our website, or call us for the location of the nearest Automation Specialist in your area:
LINTECH
For over 40 years LINTECH has designed, engineered, and manufactured mechanical motion solutions for use in a wide range of applications. Whether it is a standard positioning component or a custom positioning system, LINTECH takes great pride in manufacturing a quality product. At LINTECH we are proud to provide the motion control user with this general product guide. It was developed to assist you with acquiring the general knowledge of what LINTECH has to offer. You can find complete details on all LINTECH products via our website. Depending on the requirements, standard positioning components can often be assembled and shipped in less than 2 weeks. Custom positioning assemblies require a different approach. We evaluate your special application, use our many years of experience to guide you, and then manufacture a quality product designed to meet your performance specifications.
Toll Free: Phone: Fax: Web Site: E-Mail: 1845 Enterprise Way Monrovia, CA. 91016 (800) 435 - 7494 (626) 358 - 0110 (626) 303 - 2035 www.LintechMotion.com Lintech@LintechMotion.com
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
version: 06/2010
Table of Contents
Pages
Mechanical Components
Precision Shafting Shaft Supports Shaft Assemblies Linear Bearings - Inch Carriage Assemblies Linear Bearings - Metric Profile Rails
4-6 7-9 10 - 11 12 - 19 20 - 21 22 - 25 26 - 29
30 31 - 35 36 - 37 38 - 39
40 - 55 56 - 67 68 - 69
70 - 71 72 - 73 74 - 75
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
LINTECH
About this Brochure
Product Overview
This brochure is intended to provide a general overview on all the products available from LINTECH. There is some technical information given on each product that can assist with the selection of a product for a given application. Please visit our website at www.LintechMotion.com for complete technical specifications, available options, CAD drawings, and pricing.
LINTECH manufactures a wide range of standard round rail positioning components. The products available include: cut to length precision hardened steel shafting, shaft supports, shaft assemblies, linear bearings, pillow blocks, and carriage assemblies in both inch and metric versions. The wide array of options include: chrome plated shafts, shaft machining per the user print, all steel bearings, and bearing locks. Three different profile linear bearing versions are also available in various sizes.
LINTECH manufactures a wide range of standard ball screw assemblies. These assemblies allow the user to get a complete, ready to mount ball screw system with end supports and nut flanges. The 3 different ball screw thread accuracy grades are rolled, precision rolled, and precision ground. The support housings are made of precision machined steel and are available in 5 configurations: simple-simple, fixed (low thrust)-simple, fixed (high thrust)-simple, rigid-simple, and rigid-rigid. There are several inch & metric screw diameter and leads available, along with motor mounts, brakes, and encoder options.
LINTECH manufactures a wide range of standard linear and rotary positioning systems. There are 9 screw driven linear slide systems, 5 belt driven linear slide systems, and 2 worm gear driven rotary positioning systems. Each system has a different load capacity, envelope size, and numerous options available to make a standard system into a semi-custom.
LINTECH has the ability to make alterations to any of its standard products. These changes include special lengths, special platings, unique materials, rail & screw covers or special lubricants for different environments. LINTECH also has the ability to start from scratch and build one of a kind custom mechanical positioning systems. Common system configurations include master-slave gantries, multi-axis configurations, wide base systems, long travel lengths, heavier load capacities, high speeds, etc.. Custom systems can be provide with stress relieved steel bases, flexible aluminum bases, or precision granite bases.
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Website
LINTECH Website
Product Overview
Please visit our website at www.LintechMotion.com for complete technical specifications, dimensions, available options, CAD drawings, and pricing.
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Maximum Length
SL (inches) -SS SS (inches) -SS
Shaft Weight SN (inches) (lbs/in) 96 172 184 184 184 184 184 184 184 0.014 0.031 0.055 0.086 0.125 0.222 0.348 0.500 0.890
Length Diameter
(1)
: +/- 1/32"
(1) Length tolerance for 2" diameter shafting is +/- 1/16 inches. Tighter tolerance available. Contact the factory.
0.001/0.002 in/ft, cumulative 1060 Steel or 440C Stainless steel (only with L & S tolerance) 0.000080 inches For 0.25 - 0.75 inch dia. : 0.03 inch x 45 ,
o o
8 - 12 Ra microinch
SL Diameter Tolerance
(inches)
SS Diameter Tolerance
(inches)
SN Diameter Tolerance
(inches)
.2495 / .2490 .3745 / .3740 .4995 / .4990 .6245 / .6240 .7495 / .7490 .9995 / .9990 1.2495 / 1.2490 1.4994 / 1.4989 1.9994 / 1.9987
.2490 / .2485 .3740 / .3735 .4990 / .4985 .6240 / .6235 .7490 / .7485 .9990 / .9985 1.2490 / 1.2485 1.4989 / 1.4984 1.9987 / 1.9980
.2500 / .2498 .3750 / .3748 .5000 / .4998 .6250 / .6248 .7500 / .7498 1.0000 / .9998 1.2500 / 1.2498 1.5000 / 1.4997 2.0000 / 1.9997
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
SL-PD Series
More Information via the Web
Maximum Length
(inches)
Pre-Drilled Holes
(inches)
Shaft Weight
A
+/- .016
G
#6-32 #8-32 #10-32
1/4-20
A
(lbs/in)
-SS 172 184 184 184 184 184 184 154 154 154 154 154 154 154
Length Diameter
(1)
: +/- 1/32"
(1) Length tolerance for 2" diameter shafting is +/- 1/16 inches. Tighter tolerance available. Contact the factory.
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
SM Series
More Information via the Web
0,0254/0,0508 mm/300 mm - cumulative 1060 Steel 0,0020 mm For 8 - 20 mm dia. : 0,762 mm x 45o, For 25 - 50 mm dia. : 1,524 mm inch x 45o
8 - 12 Ra microinch
Diameter Tolerance
(mm)
8 10 12 16 20 25 30 40 50
8,00 / 7,99 10,00 / 9,99 12,00 / 11,99 16,00 / 15,99 20,00 / 19,99 25,00 / 24,99 30,00 / 29,99 40,00 / 39,99 50,00 / 49,98
Maximum Length
inches (mm)
Shaft Weight
(lbs/in)
8 10 12 16 20 25 30 40 50
184 (4673,6) 184 (4673,6) 184 (4673,6) 184 (4673,6) 184 (4673,6)
Length Diameter
(1)
: +/- 0.79 mm
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Dimensions
(inches)
Support Weight
A
+/- .001
B
2.000 2.500 2.500 3.063 3.750 4.375 5.500
C
0.875 1.250 1.250 1.500 2.000 2.250 3.000
D
.250 .313 .313 .375 .438 .500 .625
E
+/- .010
F
0.625 0.688 0.750 1.000 1.125 1.250 1.500
H
hole
M
bolt size
(lbs)
#8 #10 #10
1/4 5/16 5/16 3/ 8
C
Material:
6061-T6 aluminum Natural Finish
H M D E B A F
Dimensions
(inches)
Support Weight
A
+/- .001
B
2.000 2.500 2.750 3.312 4.000 4.750 6.000
C
0.750 0.875 1.000 1.375 1.750 2.000 2.625
D
.250 .312 .375 .375 .438 .500 .625
E
+/- .010
F
0.625 0.750 0.750 1.000 1.250 1.250 1.500
H
hole
M
bolt size
(lbs)
C
Material:
C1045 steel Blue Enamel
H M D E B A
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
- Shaft Supports -
ARS-PD Series
More Information via the Web
Dimensions
(inches)
Support Weight
A
+/- .002
B
1.500 1.625 1.750 2.125 2.500 3.000 3.750
E
+/- .010
F
hole
G
bolt size
(lbs/in)
.250 .187 1.000 .169 .312 .250 1.125 .193 .375 .250 1.250 .221 .500 .562 .687 .875 .250 .312 .375 .500 1.500 1.875 2.250 2.750 .281 .343 .406 .531
2.00 4.00 2.00 4.00 3.00 6.00 3.00 6.00 3.00 6.00 4.00 8.00 4.00 8.00
H C A F (hole size) D E B
I G
24
(1)
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
- Shaft Supports -
LSRS-PD Series
More Information via the Web
Dimensions
(inches)
Support Weight
A
+/- .002
B
0.37 0.45 0.51 0.69 0.78 0.93 1.18
C
hole
G
bolt size
H
#6-32 #8-32
(lbs/in)
2.00 4.00 2.00 4.00 3.00 6.00 3.00 6.00 3.00 6.00 4.00 8.00 4.00 8.00
#10-32
1/4-20 5/16-18 3/8-16 1/2-13
H A C
20o
48
(1)
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
- Shaft Assemblies -
SA Series
More Information via the Web
Shaft Type Shaft Roundness Shaft Chamfer Surface Finish Diameter Tolerance Hardness Depth
SL - 1060 Steel or 440C Stainless steel 0.000080 inches For 0.50 - 0.75 inch dia. : 0.03 inch x 45 ,
o o
.4995 / .4990 .6245 / .6240 .7495 / .7490 .9995 / .9990 1.2495 / 1.2490 1.4994 / 1.4989 1.9994 / 1.9987
Model Number
Dimensions
(inches)
A
+/- .002
B
1.500 1.625 1.750 2.125 2.500 3.000 3.750
C
.250 .312 .375 .500 .562 .687 .875
D
.187 .250 .250 .250 .312 .375 .500
E
+/- .010
F
hole
G
bolt size
G C A F (hole size) D E B
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Standard lengths to 16 feet (192 inches). Longer lengths available - Contact Factory.
Technical Reference
- Shaft Assemblies -
TRSA Series
More Information via the Web
Precision Machined 6061-T6 Aluminum, Black Anodized 0.001/0.002 in/ft, cumulative +/- 0.002 in overall SL - 1060 Steel or 440C Stainless steel 0.000080 inches For 0.50 - 0.75 inch dia. : 0.03 inch x 45 ,
o o
.4995 / .4990 .6245 / .6240 .7495 / .7490 .9995 / .9990 1.2495 / 1.2490 1.4994 / 1.4989 1.9994 / 1.9987
Model Number
Dimensions
(inches)
A
+/- .002
B
+/- .002
C
3.750 4.625 5.500 6.375 7.250 8.125 9.000
D
0.875 1.000 1.125 1.312 1.562 1.875 2.250
E
+/- .010
J
hole
K
Bolt Size
L (2)
Thread
2.000 .375 .312 .250 .169 2.625 .437 .312 .312 .193 3.250 .500 .312 .375 .221 3.750 .562 .312 .500 .281 4.125 .625 .375 .562 .281 4.375 .750 .437 .687 .343 4.500 .875 .562 .875 .406
B H
A G D
(hole size)
Sold & Serviced By:
E C
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Standard lengths to 16 feet (192 inches). Longer lengths available - Contact Factory.
Technical Reference
Internal Wiper Seals on both ends, Plastic Bearing Retainer Class S (SS series), hardened & ground shafting (see pages 4 & 5) LBCA
(closed style) Recommended Housing Bore Normal Fit
(inches)
LBOA
(open style) Bearing and Shaft Fit-up Nominal Shaft Diameter
(inches)
Press Fit
(inches) (inches)
.5005 / .5000 .6255 / .6250 .8755 / .8750 1.1255 / 1.1250 1.2505 / 1.2500 1.5630 / 1.5625 2.0010 / 2.0000 2.3760 / 2.3750 3.0010 / 3.0000
.4995 / .4990 .6245 / .6240 .8745 / .8740 1.1245 / 1.1240 1.2495 / 1.2490 1.5620 / 1.5615 1.9993 / 1.9983 2.3743 / 2.3733 2.9992 / 2.9982
.0015C / .0005C .0015C / .0005C .0015C / .0005C .0015C / .0005C .0015C / .0005C .0015C / .0005C .0015C / .0004C .0016C / .0005C .0020C / .0005C 0.500 0.625 0.750 1.000 1.250 1.500 2.000 .8760 / .8740 1.1260 / 1.1240 1.2510 / 1.2490 1.5635 / 1.5615 2.0010 / 1.9990 2.3760 / 2.3740 3.0010 / 2.9990
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Model Number
Without Seals With Seals
(2)
Dimensions
(inches)
(lbs)
0.750/0.735 0.515/0.499 0.039 0.5000/0.4996 0.875/0.860 0.640/0.624 0.039 0.6250/0.6246 1.250/1.235 0.967/0.951 0.046 0.8750/0.8746 1.500/1.485 1.108/1.092 0.056 1.1250/1.1246 1.625/1.610 1.170/1.154 0.056 1.2500/1.2496 2.250/2.235 1.759/1.741 0.068 1.5625/1.5621 2.625/2.605 2.009/1.991 0.068 2.0000/1.9995 3.000/2.980 2.415/2.397 0.086 2.3750/2.3745 4.000/3.980 3.195/3.177 0.103 3.0000/2.9994
LBCA-10 LBCA-10-S LBCA-12 LBCA-12-S LBCA-16 LBCA-16-S LBCA-20 LBCA-20-S LBCA-24 LBCA-24-S LBCA-32 LBCA-32-S
A D
Working Bore Diameter
Dimensions
(inches)
Bearing Weight
E
min.
(lbs)
LBOA-8
LBOA-8-S
LBOA-10 LBOA-10-S LBOA-12 LBOA-12-S LBOA-16 LBOA-16-S LBOA-20 LBOA-20-S LBOA-24 LBOA-24-S LBOA-32 LBOA-32-S
1.250/1.235 0.967/0.951 1.500/1.485 1.108/1.092 1.625/1.610 1.170/1.154 2.250/2.235 1.759/1.741 2.625/2.605 2.009/1.991 3.000/2.980 2.415/2.397 4.000/3.980 3.195/3.177
0.046 0.8760/0.8746 0.056 1.1260/1.1240 0.056 1.2510/1.2490 0.068 1.5635/1.5615 0.068 2.0010/1.9990 0.086 2.3760/2.3740 0.103 3.0010/2.9990
A D
Working Bore Diameter
E
60
o
Footnotes:
(1) Rating based upon 2 million inches of travel with the load forces being applied downward on the linear bearing, while in a horizontal application, and based upon 1060 steel shafting (Rockwell 60C). ELECTROMATE (2) The bearing retainer is plastic when the internal -S seal option is selected. Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Sold & Serviced By:
Technical Reference
0o F to + 185o F 9 ft/second Optional Internal Wiper Seals on both ends Class L (SL series), hardened & ground shafting (see pages 4 & 5) Nominal Shaft Diameter
(inches)
Adjustable Housing
(inches)
Fixed Housing
(inches)
Adjustable Housing
(inches)
.5005 / .5000 .6255 / .6250 .8755 / .8750 1.1255 / 1.1250 1.2505 / 1.2500 1.5630 / 1.5625 2.0008 / 2.0000 2.3760 / 2.3750 3.0010 / 3.0000
.5010 / .5000 .6260 / .6250 .8760 / .8750 1.1260 / 1.1250 1.2510 / 1.2500 1.5635 / 1.5625 2.0010 / 2.0000 2.3760 / 2.3750 3.0010 / 3.0000
.0015C / .0000 .0015C / .0000 .0015C / .0000 .0015C / .0000 .0015C / .0000 .0015C / .0000 .0018C / .0001P .0021C / .0000
.002C / .0000 .002C / .0000 .002C / .0000 .002C / .0000 .002C / .0000 .002C / .0000 .002C / .0000 .0021C / .0000
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Model Number
Without Seals With Seals
Housing Bore D
(inches)
(2)
Dimensions
(inches)
(lbs)
0.750/0.735 0.511/0.501 0.039 0.875/0.860 1.250/1.230 1.500/1.480 1.625/1.605 0.699/0.689 1.032/1.012 1.105/1.095 1.270/1.250 0.039 0.050 0.056 0.056
1.0000/0.9995 1.5630/1.5625 2.250/2.230 1.884/1.864 0.068 1.2500/1.2494 2.0008/2.0000 2.625/2.600 2.004/1.984 0.068 1.5000/1.4994 2.3760/2.3750 3.000/2.970 2.410/2.390 0.086 2.0000/1.9992 3.0010/3.0000 4.000/3.960 3.193/3.163 0.105
A
Working Bore Diameter
B D C
Housing Bore D
(inches)
(2)
Dimensions
(inches)
Bearing Weight
E
min.
(lbs)
0.5000/0.4995 0.8755/0.8750 1.250/1.230 1.032/1.012 0.6250/0.6245 1.1255/1.1250 1.500/1.480 1.105/1.095 0.7500/0.7495 1.2505/1.2500 1.625/1.605 1.270/1.250 1.0000/0.9995 1.2500/1.2494 1.5000/1.4994 2.0000/1.9992 1.5630/1.5625 2.0008/2.0000 2.3760/2.3750 3.0010/3.0000 2.250/2.230 1.884/1.864 2.625/2.600 2.004/1.984 3.000/2.970 2.410/2.390 4.000/3.960 3.193/3.163
0.050 0.312 0.056 0.375 0.056 0.437 0.068 0.562 0.068 0.625 0.086 0.750 0.105 1.000
A
Working Bore Diameter
B D
E
60 Footnotes:
o
(1) Rating based upon 2 million inches of travel with the load forces being applied downward on the linear bearing, while in a horizontal application, Sold & Serviced By: and based upon 1060 steel shafting (Rockwell 60C). (2) This specification is based upon the bearing being on the shaft.
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
.4995 / .4990 .6245 / .6240 .7495 / .7490 .9995 / .9990 1.2495 / 1.2490 1.4994 / 1.4989 1.9994 / 1.9987
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Dyn. (1) Nominal Load Shaft Diameter Capacity
(inches) (lbs)
Dimensions & Specifications: SLBC Single Linear Bearing Pillow Block (closed)
Dimensions
(inches)
Model Number
A
+/- .003
B
2.00 2.50 2.75 3.25 4.00 4.75 6.00
C
1.69 1.94 2.06 2.81 3.63 4.00 5.00
D
1.13 1.44 1.56 1.94 2.50 2.88 3.63
E
+/- .010
F
+/- .010
G
1.38 1.75 1.88 2.38 3.00 3.50 4.50
H
1.25 1.63 1.75 2.19 2.81 3.25 4.06
I
hole
J
bolt
(lbs)
1.688 1.000 2.125 1.125 2.375 1.250 2.875 1.750 3.500 2.000 4.125 2.500 5.250 3.250
B E A D
I J H
C
Nominal Shaft Diameter
(2)
Dimensions & Specifications: SLBO Single Linear Bearing Pillow Block (open)
Model Number Dyn. (1) Nominal Load Shaft Diameter Capacity
(inches) (lbs)
Dimensions
(inches)
Block Weight
A
+/- .003
B
2.00 2.50 2.75 3.25 4.00 4.75 6.00
C
1.50 1.75 1.88 2.63 3.38 3.75 4.75
D
1.13 1.44 1.56 2.00 2.56 2.94 3.63
E
+/- .010
F
+/- .010
G
hole
H
bolt
J
min.
K
0.75 0.94 1.00 1.25 1.63 1.88 2.44
(lbs)
1.688 1.000 2.125 1.125 2.375 1.250 2.875 1.750 3.500 2.000 4.125 2.500 5.250 3.250
.16 # 6 .25 0.31 .19 # 8 .28 0.37 .19 # 8 .31 0.43 .22 #10 .38 0.56 .22 #10 .44 0.62 .28 1 4 .50 0.75 .41 3 8 .63 1.00
E A D J K
I H
C F
Nominal Shaft Diameter
G
Footnotes:
(2)
(1) Rating based upon 2 million inches of travel with the load forces being applied downward on the linear bearing, while in a horizontal application, and based upon 1060 steel shafting (Rockwell 60C). (2) Size 0.500 has oil lubricant fitting. Sizes 0.625 and above have a 1/4-28 UNF straight thread access for lubrication.
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
.4995 / .4990 .6245 / .6240 .7495 / .7490 .9995 / .9990 1.2495 / 1.2490 1.4994 / 1.4989 1.9994 / 1.9987
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Dyn. (1) Nominal Load Shaft Diameter Capacity
(inches) (lbs)
Dimensions & Specifications: DLBC Double Linear Bearing Pillow Block (closed)
Dimensions
(inches)
Model Number
A
+/- .003
B
2.00 2.50 2.75 3.25 4.00 4.75
C
3.50 4.00 4.50 6.00 7.50 9.00
D
1.13 1.44 1.56 1.94 2.50 2.88
E
+/- .010
F
+/- .010
G
1.38 1.75 1.88 2.38 3.00 3.50
H
1.25 1.63 1.75 2.19 2.81 3.25
I
hole
J
bolt
d2
1.75 2.00 2.25 3.00 3.75 4.50
(3)
(lbs)
1.688 2.500 2.125 3.000 2.375 3.500 2.875 4.500 3.500 5.500 4.125 6.500
E A D
I J H d2
C F
Nominal Shaft Diameter
(2)
Dimensions & Specifications: DLBO Double Linear Bearing Pillow Block (open)
Model Number Dyn. (1) Nominal Load Shaft Diameter Capacity
(inches) (lbs)
Dimensions
(inches)
Block Weight
A
+/- .003
B
2.00 2.50 2.75 3.25 4.00 4.75
C
3.50 4.00 4.50 6.00 7.50 9.00
D
1.13 1.44 1.56 2.00 2.56 2.94
E
+/- .010
F
+/- .010
G
0.69 0.88 0.94 1.19 1.50 1.75
H
min.
I
hole
J
bolt
d2
(3)
(lbs)
1.688 2.500 2.125 3.000 2.375 3.500 2.875 4.500 3.500 5.500 4.125 6.500
.25 .16 # 6 0.75 .28 .19 # 8 0.94 .31 .19 # 8 1.00 .38 .22 #10 1.25 .44 .22 #10 1.63 .50 .28 1 4 1.88
E A D H K
I J
C F
Nominal Shaft Diameter
G
Footnotes:
d2
Access for Lubrication
(2)
(1) Rating based upon 2 million inches of travel with the load forces being applied downward on the linear bearing, while in a horizontal application, and based upon 1060 steel shafting (Rockwell 60C). (2) Size 0.500 has oil lubricant fitting. Sizes 0.625 and above have a 1/4-28 UNF straight thread access for lubrication. (3) This value is the center to center distance (spacing) of the bearings on a single shaft (d2).
ELECTROMATE
More Information via the Web
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
- Carriage Assemblies -
TRCA Series
More Information via the Web
Aluminum 6061-T6 Pillow Block, Natural Finish Internal Wiper Seals on Both Ends Machined Aluminum 6061-T6 Plate, Black Anodized +/- 0.001", Pillow Blocks Doweled to Carriage Plate 0o F to + 185o F 9 ft/second TRSA series (see page 11) Nominal Shaft Diameter
(inches)
.4995 / .4990 .6245 / .6240 .7495 / .7490 .9995 / .9990 1.2495 / 1.2490 1.4994 / 1.4989 1.9994 / 1.9987
Model Number
Dimensions
(inches)
B
+/- .005
D
0.75 0.93 1.00 1.25
E
0.68 0.87 0.93 1.18
F
1.12 1.43 1.56 2.00
G
2.00 2.50 2.75 3.25
H
.25 .25 .25 .25
K
0.375 0.375 0.500 0.500
dr
1.062 1.250 1.437 1.687
d1
3.00 3.75 4.50 5.25 6.00 6.62 7.25
10.50 1.62 1.50 2.56 4.00 .25 0.750 2.250 12.00 1.87 1.75 2.93 4.75 .31 1.000 2.750 14.00 2.43 2.25 3.62 6.00 .37 1.250 3.375
d1
K dr
F H G E D
Preload Adjusting Screw
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Carriage Length Threaded Insert Size
- Carriage Assemblies -
TRCA Series
12
L
(inches) (inches)
6.00 12.00 18.00 6.00 12.00 18.00 6.00 12.00 18.00 6.00 12.00 18.00 24.00 8.00 12.00 18.00 24.00 12.00 18.00 24.00 30.00 18.00 24.00 30.00
5.00 5.00 5.00 5.00 5.00 5.50 5.00 5.00 5.50 5.00 5.00 5.00 5.00 7.00 5.00 5.00 5.00 5.00 5.00 5.00 5.25 5.00 5.00 5.25
#10-32 #10-32 #10-32 #10-32 #10-32 #10-32 1/4-28 1/4-28 1/4-28 5/16-24 5/16-24 5/16-24 5/16-24 3/8-24 3/8-24 3/8-24 3/8-24 3/8-24 3/8-24 3/8-24 3/8-24 1/2-20 1/2-20 1/2-20
.75 TYP
.75 TYP*
.50 TYP
1.00 TYP*
L
18
1.25 TYP
1.50 TYP
L
24
1.25 TYP
2.00 TYP
L
30
1.25 TYP
1.875 TYP
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Dimensions & Specifications: LBCM Linear Bearing Closed Metric (Asian Style)
Model Number
Without Seals With Seals
Dimensions
(mm)
A
37 42 59 64 80
B
26,5 30,5 41,0 44,5 60,5
C
1,60 1,60 1,85 1,85 2,10
No. Bearing of Weight Ball Tracks (kg) 5 6 6 6 6 0,034 0,058 0,120 0,148 0,314
16 20 25 30 40
28 32 40 45 60
A B D C
Nominal Shaft Diameter
Dimensions & Specifications: LBOM Linear Bearing Open Metric (Asian Style)
Model Number
Without Seals With Seals
Dimensions
(mm)
Angle
A
37 42 59 64 80
B
26,5 30,5 41,0 44,5 60,5
C
1,60 1,60 1,85 1,85 2,15
E
min.
a
600 600 600 60 600
0
No. Bearing of Weight Ball Tracks (kg) 4 5 5 5 5 0,026 0,048 0,100 0,122 0,260
16 20 25 30 40
28 32 40 45 60
A B D E C
Nominal Shaft Diameter
ELECTROMATE
(1) Rating based upon 50 km of travel with the load forces being applied downward on the linear bearing, while in a horizontal application, and based upon 1060 steel shafting (Rockwell 60C). (2) This specification is based upon the bearing being on the shaft.
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Dimensions & Specifications: LBCME Linear Bearing Closed Metric (European Style)
Model Number
Without Seals With Seals
Dimensions
(mm)
A
36 45 58 68 80 100
B
24,6 31,2 43,7 51,7 60,3 77,3
C
1,30 1,60 1,85 1,85 2,15 2,65
No. Bearing of Weight Ball Tracks (kg) 5 6 6 6 6 6 0,026 0,060 0,120 0,184 0,342 0,586
16 20 25 30 40 50
26 32 40 47 62 75
A B D C
Nominal Shaft Diameter
Dimensions & Specifications: LBOME Linear Bearing Open Metric (European Style)
Model Number
Without Seals With Seals
Dimensions
(mm)
Angle
A
36 45 58 68 80 100
B
24,6 31,2 43,7 51,7 60,3 77,3
C
1,30 1,60 1,85 1,85 2,15 2,65
E
min.
a
680 550 570 57 560 540
0
No. Bearing of Weight Ball Tracks (kg) 4 5 5 5 5 5 0,020 0,050 0,100 0,154 0,286 0,486
LBOME-16 LBOME-16-S LBOME-20 LBOME-20-S LBOME-25 LBOME-25-S LBOME-30 LBOME-30-S LBOME-40 LBOME-40-S LBOME-50 LBOME-50-S
16 20 25 30 40 50
26 32 40 47 62 75
A B D E C
Nominal Shaft Diameter
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
(1) Rating based upon 50 km of travel with the load forces being applied downward on the linear bearing, while in a horizontal application, and based upon 1060 steel shafting (Rockwell 60C). (2) This specification is based upon the bearing being on the shaft.
Asian Style
SLBCM Series
Single Self-Aligning Closed
Pillow Blocks
More Information via the Web
SLBCM-A Series
Single Self-Aligning Closed Adjustable
SLBOM Series
Single Self-Aligning Open
DLBCM Series
Double Self-Aligning Closed
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
European Style
SLBCME Series
Single Self-Aligning Closed
Pillow Blocks
More Information via the Web
SLBCME-A Series
Single Self-Aligning Closed Adjustable
SLBOME Series
Single Self-Aligning Open
SLBOME-A Series
Single Self-Aligning Open Adjustable
DLBCME Series
Double Self-Aligning Closed
DLBCME-A Series
Single Self-Aligning Closed Adjustable
DLBOME Series
Double Self-Aligning Open
DLBOME-A Series
Double Self-Aligning Open Adjustable
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Features
MR series AR series
Features
Profile Rail Series
Height of Block and Rail Width x Length of Block Rail and Block Material Static Load Capacity Accuracy Maximum of Length Running Parallelism
inches
(mm)
inches
(mm)
inches
(mm)
lbs
(N)
MR12
0.512
(13)
1.06 x 1.39
(27 x 35,4)
440C SS
780
(3465)
H grade
39.37
(1000)
standard
Yes
AR15
0.945
(24)
1.34 x 2.21
(34 x 56,1)
Alloy Steel
3,937
(17500)
H grade
118.11
(3000)
optional
Yes
HR25
1.575
(40)
1.89 x 3.16
(48 x 80,2)
Alloy Steel
8,190
(36400)
H grade
157.48
(4000)
optional
Yes
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
* * * * * *
- Profile Rail Linear Bearings Miniature Rail 2 rows of re-circulating balls Equal loading in all directions Dust proof design SS bearing, rail, and balls Self lube reservoir standard
MR Series
More Information via the Web
Block Weight
Rail Weight
(kg/m)
A
MR12
B
27
C
12
D
7.5
E
10
MxG
I
22
J
15
K
20
L
25
Q
7.5
NxOxP
6 x 3.5 x 4.5
(kg)
13
0.034
0.602
H I J
M L Q
G P
F E
A C
Model Number
My
MR12
2.908
3.465
21.50
12.90
Mr
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
* * * * * *
- Profile Rail Linear Bearings Standard Load Rail 4 rows of re-circulating balls Equal loading in all directions Dust proof design Alloy steel bearing, rail, and balls Self lube reservoir optional
AR Series
More Information via the Web
Block Weight
Rail Weight
(kg/m)
A
AR15
B
34
C
15
F
6
MxG
M4 x 7
J
26
K
26
L
60
NxOxP
R
4
S
10
(kg)
24
9.5 20.1
56.1 39.5
0.140
1.290
H I J
F R Q M G N P E A B
Model Number
My
AR15
11.34
17.50
140
100
Mr
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
* * * * * *
- Profile Rail Linear Bearings Heavy Load Rail 4 rows of re-circulating balls Equal loading in all directions Dust proof design Alloy steel bearing, rail, and balls Self lube reservoir optional
HR Series
More Information via the Web
Block Weight
Rail Weight
(kg/m)
A
HR25
B
48
F
8
MxG
M6 x 9
J
35
K
35
L
60
Q
24
NxOxP
11 x 7 x 9
R
12
S
12
(kg)
40
23 12.5 33.6
80.2 60.0
0.530
3.020
H I J
F R Q M G N P E A B
Model Number
My
HR25
23.68
36.40
410
300
Mr
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Features RS Series
* * * * * * * Rolled Ball Screw Tapped Ball Nut English Leads English Diameters Pre-loaded & Non-preloaded Nuts Simple, Fixed and Rigid Housings Available Screw Sizes 0.500 0.500 0.625 0.625 0.750 0.750 1.000 1.000 1.000 1.500 1.500 1.500 1.500 inch inch inch inch inch inch inch inch inch inch inch inch inch dia., dia., dia., dia., dia., dia., dia., dia., dia., dia., dia., dia., dia., 0.200 0.500 0.200 1.000 0.200 0.500 0.250 0.500 1.000 0.250 0.500 1.000 2.000 inch inch inch inch inch inch inch inch inch inch inch inch inch lead lead lead lead lead lead lead lead lead lead lead lead lead
PS Series
* * * * * * * Precision Rolled Ball Screw Ground Ball Nut English & Metric Leads English & Metric Diameters Pre-loaded & Non-preloaded Nuts Simple, Fixed and Rigid Housings Available Screw Sizes 0.625 inch dia., 0.200 inch lead 0.750 inch dia., 0.200 inch lead 16 mm diameter, 5 mm lead 16 mm diameter, 10 mm lead 16 mm diameter, 16 mm lead 20 mm diameter, 5 mm lead 20 mm diameter, 20 mm lead
GS Series
* * * * * * * Precision Ground Ball Screw Ground Ball Nut English & Metric Leads English & Metric Diameters Pre-loaded Nuts Only Simple, Fixed and Rigid Housings Available Screw Sizes 0.625 inch dia., 0.200 inch lead 0.750 inch dia., 0.200 inch lead 16 mm diameter, 5 mm lead 16 mm diameter, 16 mm lead 20 mm diameter, 5 mm lead 20 mm diameter, 20 mm lead
* * * * *
All Steel Construction Black Oxide Finish 1 Sealed Radial Bearing No Lubrication Required Base or Face Mounted
* * * * * * *
All Steel Construction Black Oxide Finish 2 Back to Back Sealed Radial Bearings No Lubrication Required Lip Seals Base or Face Mounted Motor Mount Options
* * * * * * *
All Steel Construction Black Oxide Finish 2 Back to Back Angular Contact Bearings No Lubrication Required Lip Seals Base or Face Mounted Motor Mount Options
* * * * * * *
All Steel Construction Black Oxide Finish 2 Separated Angular Contact Bearings No Lubrication Required Lip Seals Sold & Serviced By: Base or Face Mounted Motor Mount Options ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Simple-Simple Fixed-Simple
RS Series
Screw Efficiency %
Backlash inches
(mm)
Non-preloaded Ball
< 0.003
(0,075)
90 90 60 60
< 0.008
(0,203)
9,400
(4263)
1,200
(544)
290
(131)
Preloaded Ball
< 0.003
(0,075)
0 < 0.008
(0,203)
9,280
(4209)
1,080
(489)
261
(118)
RS050020
0.500 inch dia. 0.200 inch lead Non-preloaded Turcite
< 0.003
(0,075)
800
(362)
100
(45)
24
(11)
Preloaded Turcite
< 0.003
(0,075)
720
(326)
90
(41)
21
(10)
Non-preloaded Ball
< 0.003
(0,075)
90 90 60 60
< 0.008
(0,203)
13,350
(6055)
2,200
(997)
530
(240)
Preloaded Ball
< 0.003
(0,075)
0 < 0.008
(0,203)
13,130
(5955)
1,980
(898)
477
(216)
RS050050
0.500 inch dia. 0.500 inch lead Non-preloaded Turcite
< 0.003
(0,075)
800
(362)
100
(45)
24
(11)
Preloaded Turcite
< 0.003
(0,075)
720
(326)
90
(41)
21
(10)
Other Specifications
Maximum Acceleration Rate Maximum Speed Screw Material Screw Extensions Maximum Screw Stock Length Screw Weight Support Housings Support Housing Features Nut Flanges Nut Flange Features Ball nut: 772 inches/sec2 (19.6 m/sec2) ( 4.9 m/sec2) Turcite nut: 193 inches/sec2 Ball nut: 3000 rpm
Right Hand Thread, Case Hardened Rc 58 Steel Rolled Ball Screw 304 Woodruff Keyways on Extensions from Support Housings 72 inches 0.66 lbs/ft (1828 mm) (9,1 kg/cm)
Steel with Black Oxide Finish, 45o Chamfer x .02 inch (0,50) all Straight Edges Base or Face Mount with Integral Seals Steel with Black Oxide Finish English or Metric Load Mounting Interface
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Simple-Simple Fixed-Simple
RS Series
Screw Efficiency %
Backlash inches
(mm)
Non-preloaded Ball
< 0.003
(0,075)
90 90 60 60
< 0.008
(0,203)
7,450
(3379)
800
(363)
190
(86)
Preloaded Ball
< 0.003
(0,075)
0 < 0.008
(0,203)
6,070
(2753)
720
(326)
171
(78)
RS062020
0.625 inch dia. 0.200 inch lead Non-preloaded Turcite
< 0.003
(0,075)
800
(362)
100
(45)
24
(11)
Preloaded Turcite
< 0.003
(0,075)
720
(326)
90
(41)
21
(10)
Non-preloaded Ball
< 0.004
(0,099)
90 90 60 60
< 0.008
(0,203)
2,425
(1100)
590
(268)
140
(64)
Preloaded Ball
< 0.004
(0,099)
0 < 0.008
(0,203)
2,425
(1100)
531
(241)
126
(57)
RS062100
0.625 inch dia. 1.000 inch lead Non-preloaded Turcite
< 0.004
(0,099)
800
(362)
100
(45)
24
(11)
Preloaded Turcite
< 0.004
(0,099)
720
(326)
90
(41)
21
(10)
Other Specifications
Maximum Acceleration Rate Maximum Speed Screw Material Screw Extensions Maximum Screw Stock Length Screw Weight Support Housings Support Housing Features Nut Flanges Nut Flange Features Ball nut: 772 inches/sec2 (19.6 m/sec2) ( 4.9 m/sec2) Turcite nut: 193 inches/sec2 Ball nut: 3000 rpm
Right Hand Thread, Case Hardened Rc 58 Steel Rolled Ball Screw 304 Woodruff Keyways on Extensions from Support Housings 72 inches 0.92 lbs/ft (1828 mm) (12,7 kg/cm)
Steel with Black Oxide Finish, 45o Chamfer x .02 inch (0,50) all Straight Edges Base or Face Mount with Integral Seals Steel with Black Oxide Finish English or Metric Load Mounting Interface
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Simple-Simple Fixed-Simple
RS Series
Screw Efficiency %
Backlash inches
(mm)
Non-preloaded Ball
< 0.003
(0,075)
90 90 60 60
< 0.008
(0,203)
18,800
(8527)
1,900
(862)
460
(208)
Preloaded Ball
< 0.003
(0,075)
0 < 0.008
(0,203)
18,610
(8441)
1,710
(776)
414
(188)
RS075020
0.750 inch dia. 0.200 inch lead Non-preloaded Turcite
< 0.003
(0,075)
1,500
(680)
195
(88)
45
(20)
Preloaded Turcite
< 0.003
(0,075)
1350
(612)
175
(79)
40
(18)
Non-preloaded Ball
< 0.003
(0,075)
90 90 60 60
< 0.008
(0,203)
24,200
(10977)
3,450
(1565)
820
(372)
Preloaded Ball
< 0.003
(0,075)
0 < 0.008
(0,203)
23,855
(10820)
3,105
(1408)
738
(335)
RS075050
0.750 inch dia. 0.500 inch lead Non-preloaded Turcite
< 0.003
(0,075)
1,500
(680)
195
(88)
45
(20)
Preloaded Turcite
< 0.003
(0,075)
1,350
(612)
175
(79)
40
(18)
Other Specifications
Maximum Acceleration Rate Maximum Speed Screw Material Screw Extensions Maximum Screw Stock Length Screw Weight Support Housings Support Housing Features Nut Flanges Nut Flange Features Ball nut: 772 inches/sec2 (19.6 m/sec2) ( 4.9 m/sec2) Turcite nut: 193 inches/sec2 Ball nut: 3000 rpm
Right Hand Thread, Case Hardened Rc 58 Steel Rolled Ball Screw 304 Woodruff Keyways on Extensions from Support Housings 72 inches 1.42 lbs/ft (1828 mm) (19,6 kg/cm)
Steel with Black Oxide Finish, 45o Chamfer x .02 inch (0,50) all Straight Edges Base or Face Mount with Integral Seals Steel with Black Oxide Finish English or Metric Load Mounting Interface
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Simple-Simple Fixed-Simple
RS Series
Non-preloaded Ball
< 0.009
(0,229)
90 90 60 60
< 0.009
(0,229)
30,750
(13947)
3,350
(1519)
810
(367)
Preloaded Ball
< 0.009
(0,229)
0 < 0.009
(0,229)
30,415
(13796)
3,015
(1367)
729
(330)
RS100025
1.000 inch dia. 0.250 inch lead Non-preloaded Turcite
< 0.009
(0,229)
1,500
(380)
195
(88)
45
(20)
Preloaded Turcite
< 0.009
(0,229)
1,350
(612)
175
(79)
40
(18)
Non-preloaded Ball
< 0.009
(0,229)
90 90 60 60
< 0.009
(0,229)
32,300
(14650)
3,950
(1792)
970
(440)
Preloaded Ball
< 0.009
(0,229)
0 < 0.009
(0,229)
31,905
(14471)
3,555
(1612)
873
(396)
RS100050
1.000 inch dia. 0.500 inch lead Non-preloaded Turcite
< 0.009
(0,229)
1,500
(680)
195
(88)
45
(20)
Preloaded Turcite
< 0.009
(0,229)
1,350
(612)
175
(79)
40
(18)
Non-preloaded Ball
< 0.009
(0,229)
90 90 60 60
< 0.009
(0,229)
13,750
(6236)
2,250
(1020)
560
(254)
Preloaded Ball
< 0.009
(0,229)
0 < 0.009
(0,229)
13,525
(6134)
2,025
(918)
504
(229)
RS100100
1.000 inch dia. 1.000 inch lead Non-preloaded Turcite
< 0.009
(0,229)
1,500
(680)
195
(88)
45
(20)
Preloaded Turcite
< 0.009
(0,229)
1,350
(612)
175
(79)
40
(18)
Other Specifications
Maximum Acceleration Rate Maximum Speed Screw Material Screw Extensions Maximum Screw Stock Length Screw Weight Support Housings Support Housing Features Nut Flanges Nut Flange Features Ball nut: 772 inches/sec2 (19.6 m/sec2) ( 4.9 m/sec2) Turcite nut: 193 inches/sec2 Ball nut: 3000 rpm
Right Hand Thread, Case Hardened Rc 58 Steel Rolled Ball Screw 605 Woodruff Keyways on Extensions from Support Housings 144 inches 2.23 lbs/ft
o
Sold & Serviced Steel with Black Oxide Finish, 45 Chamfer x .03 inch (0,76) all Straight Edges By:
Base or Face Mount with Integral Seals Steel with Black Oxide Finish English or Metric Load Mounting Interface
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Simple-Simple Fixed-Simple
RS Series
Screw Efficiency %
Backlash inches
(mm)
Non-preloaded Ball
< 0.013
(0,330)
90 90
< 0.009
(0,229)
47,450
(21523)
4,050
(1837)
970
(440)
RS150025
1.500 inch dia. 0.250 inch lead Preloaded Ball
< 0.013
(0,330)
47,045
(21339)
3,645
(1653)
873
(396)
Non-preloaded Ball
< 0.013
(0,330)
90 90
< 0.009
(0,229)
102,300
(46402)
12,900
(5851)
3,100
(1406)
RS150050
1.500 inch dia. 0.500 inch lead Preloaded Ball
< 0.013
(0,330)
101,010
(45817)
11,610
(5266)
2,790
(1266)
Non-preloaded Ball
< 0.013
(0,330)
90 90
< 0.009
(0,229)
47,800
(21682)
8,250
(3742)
2,020
(916)
RS150100
1.500 inch dia. 1.000 inch lead Preloaded Ball
< 0.013
(0,330)
46,975
(21307)
7,425
(3368)
1,818
(825)
Non-preloaded Ball
< 0.013
(0,330)
90 90
< 0.009
(0,229)
31,250
(14175)
7,600
(3447)
1,850
(839)
RS150200
1.500 inch dia. 2.000 inch lead Preloaded Ball
< 0.013
(0,330)
28,240
(12809)
6,840
(3103)
1,665
(755)
Other Specifications
Maximum Acceleration Rate Maximum Speed Screw Material Screw Extensions Maximum Screw Stock Length Screw Weight Support Housings Support Housing Features Nut Flanges Nut Flange Features Ball nut: 772 inches/sec2 (19.6 m/sec2) Ball nut: 3000 rpm Right Hand Thread, Case Hardened Rc 58 Steel Rolled Ball Screw 605 Woodruff Keyways on Extensions from Support Housings 144 inches 5.58 lbs/ft (3657 mm) (77,1 kg/cm)
Steel with Black Oxide Finish, 45o Chamfer x .03 inch (0,76) all Straight Edges Base or Face Mount with Integral Seals Steel with Black Oxide Finish English or Metric Load Mounting Interface
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Simple-Simple Fixed-Simple
PS Series
Screw Efficiency %
Backlash inches
(mm)
Non-preloaded Ball
< 0.002
(0,050)
90 90
< 0.003
(0,076)
2,700
(1224)
876
(397)
190
(86)
PS062020
0.625 inch dia. 0.200 inch lead Preloaded Ball
< 0.002
(0,050)
2,430
(1102)
788
(357)
171
(78)
Non-preloaded Ball
< 0.002
(0,050)
90 90
< 0.003
(0,076)
2,700
(1224)
876
(397)
190
(86)
PS16M05M
16 mm dia. 5 mm lead Preloaded Ball
< 0.002
(0,050)
2,430
(1102)
788
(357)
171
(78)
Non-preloaded Ball
< 0.002
(0,050)
90 90
< 0.003
(0,076)
2,630
(1192)
1,080
(489)
235
(106)
PS16M10M
16 mm dia. 10 mm lead Preloaded Ball
< 0.002
(0,050)
2.365
(1072)
972
(440)
211
(95)
Non-preloaded Ball
< 0.002
(0,050)
90 90
< 0.003
(0,076)
1,620
(734)
819
(371)
179
(81)
PS16M16M
16 mm dia. 16 mm lead Preloaded Ball
< 0.002
(0,050)
1,455
(659)
737
(334)
161
(73)
Other Specifications
Maximum Acceleration Rate Maximum Speed Screw Material Screw Extensions Maximum Screw Stock Length Screw Weight Support Housings Support Housing Features Nut Flanges Nut Flange Features Ball nut: 772 inches/sec2 (19.6 m/sec2) Ball nut: 3000 rpm Right Hand Thread, Case Hardened Rc 58 Steel Rolled Ball Screw 304 Woodruff Keyways on Extensions from Support Housings 78.74 inches 0.87 lbs/ft (2000 mm) (12,0 kg/cm)
Steel with Black Oxide Finish, 45o Chamfer x .02 inch (0,50) all Straight Edges Base or Face Mount with Integral Seals Steel with Black Oxide Finish English or Metric Load Mounting Interface
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Simple-Simple Fixed-Simple
PS Series
Screw Efficiency %
Backlash inches
(mm)
Non-preloaded Ball
< 0.002
(0,050)
90 90
< 0.003
(0,076)
3,360
(1524)
964
(437)
210
(95)
PS075020
0.750 inch dia. 0.200 inch lead Preloaded Ball
< 0.002
(0,050)
3,025
(1372)
867
(393)
189
(86)
Non-preloaded Ball
< 0.002
(0,050)
90 90
< 0.003
(0,076)
3,990
(1809)
1,070
(485)
234
(106)
PS20M05M
20 mm dia. 5 mm lead Preloaded Ball
< 0.002
(0,050)
3,590
(1628)
960
(435)
210
(95)
Non-preloaded Ball
< 0.002
(0,050)
90 90
< 0.003
(0,076)
3,505
(1589)
1,293
(586)
283
(128)
PS20M20M
20 mm dia. 20 mm lead Preloaded Ball
< 0.002
(0,050)
3,150
(1428)
1,160
(526)
255
(116)
Other Specifications
Maximum Acceleration Rate Maximum Speed Screw Material Screw Extensions Maximum Screw Stock Length Screw Weight Support Housings Support Housing Features Nut Flanges Nut Flange Features Ball nut: 772 inches/sec2 (19,6 m/sec2) Ball nut: 3000 rpm Right Hand Thread, Case Hardened Rc 58 Steel Precision Rolled Ball Screw 304 Woodruff Keyways on Extensions from Support Housings 118.11 inches 1.35 lbs/ft (3000 mm)
(18,7 kg/cm)
Steel with Black Oxide Finish, 45o Chamfer x .02 inch (0,50) all Straight Edges Base or Face Mount with Integral Seals Steel with Black Oxide Finish English or Metric Load Mounting Interface
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Simple-Simple Fixed-Simple
GS Series
Screw Efficiency %
Backlash inches
(mm)
GS062020
0.625 inch dia. 0.200 inch lead
Preloaded Ball
< 0.0005
(0,012)
90
3,080
(1397)
987
(447)
216
(97)
GS16M05M
16 mm dia. 5 mm lead
Preloaded Ball
< 0.0005
(0,012)
90
3,080
(1397)
987
(447)
216
(97)
GS16M16M
16 mm dia. 16 mm lead
Preloaded Ball
< 0.0005
(0,012)
90
1,800
(816)
910
(816)
199
(90)
Other Specifications
Maximum Acceleration Rate Maximum Speed Screw Material Screw Extensions Maximum Screw Stock Length Screw Weight Support Housings Support Housing Features Nut Flanges Nut Flange Features Ball nut: 772 inches/sec2 (19,6 m/sec2) Ball nut: 3000 rpm Right Hand Thread, Case Hardened Rc 58 Steel Precision Rolled Ball Screw 304 Woodruff Keyways on Extensions from Support Housings 45.27 inches 0.87 lbs/ft (1150 mm) (12,0 kg/cm)
Steel with Black Oxide Finish, 45o Chamfer x .02 inch (0,50) all Straight Edges Base or Face Mount with Integral Seals Steel with Black Oxide Finish English or Metric Load Mounting Interface
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Simple-Simple Fixed-Simple
GS Series
Screw Efficiency %
Backlash inches
(mm)
GS075020
0.750 inch dia. 0.200 inch lead
Preloaded Ball
< 0.0005
(0,012)
90
3,990
(1809)
1,070
(485)
234
(106)
GS20M05M
20 mm dia. 5 mm lead
Preloaded Ball
< 0.0005
(0,012)
90
3,990
(1809)
1,070
(485)
234
(106)
GS20M20M
20 mm dia. 20 mm lead
Preloaded Ball
< 0.0005
(0,012)
90
3,505
(1589)
1,293
(586)
283
(128)
Other Specifications
Maximum Acceleration Rate Maximum Speed Screw Material Screw Extensions Maximum Screw Stock Length Screw Weight Support Housings Support Housing Features Nut Flanges Nut Flange Features Ball nut: 772 inches/sec2 (19,6 m/sec2) Ball nut: 3000 rpm Right Hand Thread, Case Hardened Rc 58 Steel Precision Rolled Ball Screw 304 Woodruff Keyways on Extensions from Support Housings 64.95 inches 1.35 lbs/ft (1650 mm) (18,7 kg/cm)
Steel with Black Oxide Finish, 45o Chamfer x .02 inch (0,50) all Straight Edges Base or Face Mount with Integral Seals Steel with Black Oxide Finish English or Metric Load Mounting Interface
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features
- Screw Drive -
130 Series
Compact 2.875 inches (73 mm) wide by 2.375 inches (60 mm) tall Travel lengths from 2 inches (50 mm) to 60 inches (1520 mm) Threaded stainless steel inserts in carriage for load mounting 0o F to +185o F (-18o C to +85o C) operating temperature Recirculating linear ball bearing system Precision ground square rail design 1 rail, 1 or 2 bearing carriages
130-CP0 series
Options
Chrome plated linear bearings, rails and screws AUTOCAD drawings available via the internet End of travel (EOT) and home switches wired Adapter brackets for non-NEMA motors Linear and rotary incremental encoders NEMA 23 & 34 motor wrap packages NEMA 34 adapter bracket Power-off electric brakes Carriage adapter plates Vertical angle brackets Turcite nut options Motor couplings Cover plates Hand crank Ball screws: Rolled - Non-preloaded & Preloaded Nuts:
0.625 inch diameter, 0.200 inch lead * 0.500 inch diameter, 0.500 inch lead 0.625 inch diameter, 1.000 inch lead
130-CP1 series
130-CP2 series
0.625 inch diameter, 0.200 inch lead 16 mm diameter, 5 mm lead 16 mm diameter, 16 mm lead * (Reduction of travel with preloaded nut)
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic Horizontal Dynamic Horizontal Static Horizontal Dynamic Roll Moment Dynamic Roll Moment Static Roll Moment Dyn. Pitch & Yaw Moment Dyn. Pitch & Yaw Moment Static Pitch & Yaw Moment Each Bearing Dyn. Capacity Each Bearing Dyn. Capacity
2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel
- Screw Drive -
130 Series
Two (2) Bearing Carriage 200 54 400 lbs lbs lbs ( 90 ( 24 (180 ( 22 ( 5 kg) kg) kg) N-m) N-m) N-m) N-m) N-m) N-m) kg) kg) kg) kg) kg)
One (1) Bearing Carriage 100 27 200 lbs lbs lbs ( 45 ( 12 ( 90 ( 11 ( 3 kg) kg) kg) N-m) N-m) N-m)
8 ft-lbs 2 ft-lbs 14 ft-lbs 4 ft-lbs 1 ft-lbs 8 ft-lbs 100 27 200 665 180 lbs lbs lbs lbs lbs
2
16 ft-lbs 4 ft-lbs 28 ft-lbs 15 ft-lbs 4 ft-lbs 30 ft-lbs 100 27 200 665 180 lbs lbs lbs lbs lbs
2
( 19 ( (
( 38 ( 20 ( 5
5,4 N-m) 1,5 N-m) N-m) kg) kg) kg) kg) kg)
2
( 10 ( 45 ( 12 ( 90 (302 ( 82
( 40 ( 45 ( 12 ( 90 (302 ( 82
Each Bearing Static Load Capacity Thrust Force Capacity Thrust Force Capacity Maximum Acceleration d2 dr dr
Center to center distance (spacing) of each bearing on a single rail
CP0 version Center distance of the bearing to top of carriage plate surface CP1 version Center distance of the bearing to top of carriage plate surface
50 in/sec
(1,3 m/sec ) -
150 in/sec
0.750 in 1.375 in
Other Table Material Linear Rail Material Screw Material Screw Material Unidirectional Repeatability Bidirectional Repeatability Straightness Flatness Orthogonality (multi-axis systems) Friction Coefficient Motor Mount Coupling
For One (1) & Two (2) Bearing Carriages Base, Carriage, End Plates, & Cover Plate option - 6061 anodized aluminum Stainless Steel Acme Screw - Stainless Steel Rolled Ball, Precision Ball, & Ground Ball - Case Hardened Steel +/- 0.0001 in (2,5 microns) to +/- 0.0002 in (5 microns) - depends on selected screw +/- 0.0001 in (2,5 microns) to +/- 0.0082 in (208 microns) - depends on selected screw < 0.00013 in/in < 0.00013 in/in (< (< 3,30 3,30 microns/25mm) microns/25mm)
< 30 arc-seconds < 0.01 NEMA 23 & 34 Mounts, Metric Mounts, Motor Wraps, and Hand Crank Option Three (3) different styles available
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features
- Screw Drive -
Compact 3.50 inches (89 mm) wide by 2.375 inches (60 mm) tall - 100 series Compact 5.25 inches (133 mm) wide by 2.375 inches (60 mm) tall - 110 series Travel lengths from 2 inches (50 mm) to 60 inches (1520 mm) Threaded stainless steel inserts in carriage for load mounting 0o F to +185o F (-18o C to +85o C) operating temperature Recirculating linear ball bearing system Precision ground square rail design 2 rails, 2 or 4 bearing carriages
100-CP0 series
Options
Chrome plated linear bearings, rails and screws End of travel (EOT) and home switches wired CAD drawings available via the internet Adapter brackets for non-NEMA motors Linear and rotary incremental encoders NEMA 23 & 34 motor wrap packages NEMA 34 adapter bracket Power-off electric brakes Carriage adapter plates Vertical angle bracket Turcite nut option Motor couplings Cover plates Waycovers Hand crank Ball screws: Rolled - Non-preloaded & Preloaded Nuts:
0.625 inch diameter, 0.200 inch lead
100-CP1 series
100-CP2 series
110-WC1 series
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic Horizontal Dynamic Horizontal Static Horizontal Dynamic Roll Moment Dynamic Roll Moment Static Roll Moment Dyn. Pitch & Yaw Moment Dyn. Pitch & Yaw Moment Static Pitch & Yaw Moment Each Bearing Dyn. Capacity Each Bearing Dyn. Capacity
2 million inches (50 km) of travel 2 million inches (50 km) of travel 2 million inches (50 km) of travel 2 million inches (50 km) of travel
- Screw Drive -
Two (2) Bearing Carriage 1,550 415 2,360 lbs lbs lbs ( ( 703 188 kg) kg) kg)
( 1070 ( ( ( ( ( ( ( ( ( ( (
2
( 2140 ( ( ( ( ( ( ( ( ( ( (
2
140 ft-lbs 37 ft-lbs 210 ft-lbs 18 ft-lbs 5 ft-lbs 30 ft-lbs 775 208 1,180 665 180 lbs lbs lbs lbs lbs
190 N-m) 50 N-m) 285 N-m) 24 N-m) 7 N-m) 41 N-m) 351 94 535 302 82 kg) kg) kg) kg) kg)
2
280 ft-lbs 75 ft-lbs 425 ft-lbs 240 ft-lbs 65 ft-lbs 365 ft-lbs 775 208 1,180 665 180 lbs lbs lbs lbs lbs
379 N-m) 101 N-m) 576 N-m) 325 N-m) 88 N-m) 495 N-m) 351 94 535 302 82 kg) kg) kg) kg) kg)
Each Bearing Static Load Capacity Thrust Force Capacity Thrust Force Capacity Maximum Acceleration d1 d2 dr dr
Center to center distance (spread) between the two rails Center to center distance (spacing) of the bearings on a single rail
CP0 version CP1 version
386 in/sec
772 in/sec
( 19,6 m/sec2) ( 60,3 ( 53,0 ( 19,1 ( 34,9 mm) mm) mm) mm)
2.375 in
2.375 in 2.088 in
Center distance of the bearing to top of carriage plate surface Center distance of the bearing to top of carriage plate surface
.750 in 1.375 in
( 19,1 ( 34,9
mm) mm)
.750 in 1.375 in
Other Table Material Linear Rail Material Screw Material Screw Material Unidirectional Repeatability Bidirectional Repeatability Straightness Flatness Orthogonality (multi-axis systems) Friction Coefficient Motor Mount Coupling Waycover Material (110 series)
For Two (2) & Four (4) Bearing Carriages Base, Carriage, End Plates, & Cover Plate option - 6061 anodized aluminum Stainless Steel Acme Screw - Stainless Steel Rolled Ball, Precision Ball, & Ground Ball - Case Hardened Steel +/- 0.0001 in (2,5 microns) to +/- 0.0002 in (5 microns) - depends on selected screw +/- 0.0001 in (2,5 microns) to +/- 0.0082 in (208 microns) - depends on selected screw < 0.00013 in/in < 0.00013 in/in (< (< 3,30 3,30 microns/25mm) microns/25mm)
< 30 arc-seconds < 0.01 NEMA 23 & 34 Mounts, Metric Mounts, Motor Wraps, and Hand Crank Option Three (3) different styles available Hypilon Polyester Bellows firmly mounted to carriage & end plates
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features
- Screw Drive -
90 Series
Compact 8.0 inches (203 mm) wide by 2.930 inches (74 mm) tall Travel lengths from 6 inches (150 mm) to 60 inches (1520 mm) Threaded stainless steel inserts in carriage for load mounting 0o F to +185o F (-18o C to +85o C) operating temperature 2 rail, 4 bearing, 6 & 12 inch long carriages Recirculating linear ball bearing system Precision ground round rail design
90-WC0 series
Options
Chrome plated linear bearings, rails and screws End of travel (EOT) and home switches wired CAD drawings available via the internet Adapter brackets for non-NEMA motors Linear and rotary incremental encoders NEMA 23 & 34 motor wrap packages NEMA 34 adapter bracket Power-off electric brakes Vertical angle bracket Turcite nut option Motor couplings Hand crank Ball screws: Rolled - Non-preloaded & Preloaded Nuts:
0.625 0.625 0.750 0.750 1.000 1.000 1.000 inch inch inch inch inch inch inch diameter, diameter, diameter, diameter, diameter, diameter, diameter, 0.200 1.000 0.200 0.500 0.250 0.500 1.000 inch inch inch inch inch inch inch lead lead lead lead lead lead lead
90-WC1 series
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic Horizontal Dynamic Horizontal Static Horizontal
(1) (1) (1) (1) (1)
- Screw Drive -
90 Series
12 inch (4 bearing) Carriage 3,300 885 5,000 lbs lbs lbs ( 1496 ( 401 kg) kg) kg)
6 inch (4 bearing) Carriage 3,300 885 5,000 lbs lbs lbs ( 1496 ( 401 kg) kg) kg)
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
( 2268 ( ( ( ( ( ( ( ( ( ( (
2
( 2268 ( ( ( ( (
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
515 N-m) 138 N-m) 780 N-m) 203 N-m) 55 N-m) 305 N-m) 374 100 567 406 109 kg) kg) kg) kg) kg)
2
380 ft-lbs 102 ft-lbs 575 ft-lbs 525 ft-lbs 141 ft-lbs 790 ft-lbs 825 222 1,250 895 240 lbs lbs lbs lbs lbs
2
515 N-m) 138 N-m) 780 N-m) 712 N-m) 191 N-m)
Dyn. Pitch & Yaw Moment Dyn. Pitch & Yaw Moment
(1) (1)
(1) (1)
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
Static Pitch & Yaw Moment Each Bearing Dyn. Cap. Each Bearing Dyn. Cap.
(1)
( 1071 N-m) ( ( ( ( ( 374 100 567 406 109 kg) kg) kg) kg) kg)
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
(1)
Each Bearing Static Load Capacity Thrust Force Capacity Thrust Force Capacity Maximum Acceleration d1 d2 dr
772 in/sec
772 in/sec
Center to center distance (spread) between the two rails Center to center distance (spacing) of the bearings on a single rail Center distance of the bearing to top of carriage plate surface
Other Table Material Linear Rail Material Screw Material Screw Material Unidirectional Repeatability Bidirectional Repeatability Straightness Flatness Orthogonality (multi-axis systems) Friction Coefficient Motor Mount Coupling Waycover Material
For Six (6) & Twelve (12) Inch Carriages Base, Carriage & End Plates - 6061 anodized aluminum Case Hardened Steel Acme Screw - Stainless Steel Rolled Ball, Precision Ball, & Ground Ball - Case Hardened Steel +/- 0.0002 in (5 microns) +/- 0.0002 in (5 microns) to +/- 0.0092 in (234 microns) - depends on selected screw < 0.00016 in/in < 0.00016 in/in (< (< 4,06 4,06 microns/25mm) microns/25mm)
< 30 arc-seconds < 0.01 NEMA 23 & 34 Mounts, Metric Mounts, Motor Wraps, and Hand Crank Option Three (3) different styles available Hypilon Polyester Bellows firmly mounted to carriage & end plates
Footnotes:
(1) Derate value by 50 % when load is applied to the open end of the bearing (such as in moment loads and inverted configurations).
Sold & Serviced By:
ELECTROMATE
More Information via the Web
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features
Compact 5.50 inches (139,7 mm) wide by 2.953 inches (75 mm) tall - 160 series Compact 6.00 inches (152,4 mm) wide by 2.953 inches (75 mm) tall - 170 series T-slot or threaded stainless steel inserts in carriage for load mounting Travel lengths from 6 inches (150 mm) to 60 inches (1520 mm) 0o F to +185o F (-18o C to +85o C) operating temperature 2 rails, 2 or 4 bearing, 6 inch long carriage Recirculating linear ball bearing system Precision ground square rail design
160-CP0 series
Options
Chrome plated linear bearings, rails and screws End of travel (EOT) and home switches wired CAD drawings available via the internet Adapter brackets for non-NEMA motors Linear and rotary incremental encoders NEMA 23 & 34 motor wrap packages NEMA 34 adapter bracket Motor couplings Power-off electric brakes Cover plates Turcite nut option Waycovers Ball screws: Rolled - Non-preloaded & Preloaded Nuts:
0.625 0.625 0.750 0.750 inch inch inch inch diameter, diameter, diameter, diameter, 0.200 1.000 0.200 0.500 inch inch inch inch lead lead lead lead
170-CP0 series
170-CP1 series
170-CP2 series
170-WC1 series
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic Horizontal Dynamic Horizontal Static Horizontal Dynamic Roll Moment Dynamic Roll Moment Static Roll Moment Dyn. Pitch & Yaw Moment Dyn. Pitch & Yaw Moment Static Pitch & Yaw Moment Each Bearing Dyn. Capacity Each Bearing Dyn. Capacity
Two (2) Bearing Carriage 3,890 1,045 5,830 lbs lbs lbs ( 1765 ( 474 kgf) kgf) kgf)
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
( 2645 ( (
( 5290
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
1,025 ft-lbs 275 ft-lbs 1,830 ft-lbs 930 ft-lbs 250 ft-lbs 1,670 ft-lbs 1,945 525 2,910 895 240 lbs lbs lbs lbs lbs
2
( 1240 N-m) ( ( ( ( ( 96 N-m) 26 N-m) 170 N-m) 882 238 kgf) kgf) kgf) kgf) kgf)
2
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
Each Bearing Static Load Capacity Thrust Force Capacity Thrust Force Capacity Maximum Acceleration d1 d2 dr
Center to center distance (spread) between the two rails Center to center distance (spacing) of the bearings on a single rail Center distance of the bearing to top of carriage plate surface 10 million screw revolutions 500 million screw revolutions
386 in/sec
772 in/sec
3.660 in
3.660 in 3.290 in
1.320 in
( 33,53
mm)
1.320 in
Other Table Material Linear Rail Material Screw Material Screw Material Unidirectional Repeatability Bidirectional Repeatability Straightness Flatness Orthogonality (multi-axis systems) Friction Coefficient Motor Mount Coupling Waycover Material
For Two (2) & Four (4) Bearing Carriages Base, Carriage, End Plates & Cover Plate Option - 6061 anodized aluminum Case Hardened Steel Acme Screw - Stainless Steel Rolled Ball, Precision Ball, & Ground Ball - Case Hardened Steel +/- 0.0002 in (5 microns) +/- 0.0002 in (5 microns) to +/- 0.0082 in (208 microns) - depends on selected screw < 0.00016 in/in < 0.00016 in/in (< (< 4,06 4,06 microns/25mm) microns/25mm)
< 30 arc-seconds < 0.01 NEMA 23 & 34 Mounts, Metric Mounts, Motor Wraps, and Hand Crank Option Three (3) different styles available Hypilon Polyester Bellows mounted to carriage & end plates
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features
170 Series
Compact 6.00 inches (152,4 mm) wide by 2.953 inches (75 mm) tall Threaded stainless steel inserts in carriage for load mounting Travel lengths from 6 inches (150 mm) to 60 inches (1520 mm) 0o F to +185o F (-18o C to +85o C) operating temperature 2 rails, 4 or 6 bearing, 12 inch long carriage Recirculating linear ball bearing system Precision ground square rail design
170-CP0 series
Options
Chrome plated linear bearings, rails and screws End of travel (EOT) and home switches wired CAD drawings available via the internet Adapter brackets for non-NEMA motors Linear and rotary incremental encoders NEMA 23 & 34 motor wrap packages NEMA 34 adapter bracket Motor couplings Power-off electric brakes Cover plates Turcite nut option Waycovers Ball screws: Rolled - Non-preloaded & Preloaded Nuts:
0.625 0.625 0.750 0.750 inch inch inch inch diameter, diameter, diameter, diameter, 0.200 1.000 0.200 0.500 inch inch inch inch lead lead lead lead
170-CP1 series
170-CP2 series
170-WC1 series
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic Horizontal Dynamic Horizontal Static Horizontal Dynamic Roll Moment Dynamic Roll Moment Static Roll Moment Dyn. Pitch & Yaw Moment Dyn. Pitch & Yaw Moment Static Pitch & Yaw Moment Each Bearing Dyn. Capacity Each Bearing Dyn. Capacity
170 Series
Six (6) Bearing Carriage 11,660 3,135 17,500 lbs lbs lbs ( 5280 ( 1420 ( 7930 kgf) kgf) kgf)
Four (4) Bearing Carriage 7,780 2,090 11,660 lbs lbs lbs ( 3530 ( 948 kgf) kgf) kgf)
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
( 5290
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
1,540 ft-lbs 410 ft-lbs 2,750 ft-lbs 2,235 ft-lbs 600 ft-lbs 3,980 ft-lbs 1,945 525 2,910 895 240 lbs lbs lbs lbs lbs
2
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
Each Bearing Static Load Capacity Thrust Force Capacity Thrust Force Capacity Maximum Acceleration d1 d2 dr
Center to center distance (spread) between the two rails Center to center distance (spacing) of the bearings on a single rail Center distance of the bearing to top of carriage plate surface 10 million screw revolutions 500 million screw revolutions
772 in/sec
772 in/sec
Other Table Material Linear Rail Material Screw Material Screw Material Unidirectional Repeatability Bidirectional Repeatability Straightness Flatness Orthogonality (multi-axis systems) Friction Coefficient Motor Mount Coupling Waycover Material
For Four (4) & Six (6) Bearing Carriages Base, Carriage, End Plates & Cover Plate Option - 6061 anodized aluminum Case Hardened Steel Acme Screw - Stainless Steel Rolled Ball, Precision Ball, & Ground Ball - Case Hardened Steel +/- 0.0002 in (5 microns) +/- 0.0002 in (5 microns) to +/- 0.0082 in (208 microns) - depends on selected screw < 0.00016 in/in < 0.00016 in/in (< (< 4,06 4,06 microns/25mm) microns/25mm)
< 30 arc-seconds < 0.01 NEMA 23 & 34 Mounts, Metric Mounts, Motor Wraps, and Hand Crank Option Three (3) different styles available Hypilon Polyester Bellows mounted to carriage & end plates
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features
- Screw Drive -
150 Series
Compact 6.750 inches (171 mm) wide by 2.625 inches (67 mm) tall Travel lengths from 6 inches (150 mm) to 62 inches (1570 mm) Threaded stainless steel inserts in carriage for load mounting 0o F to +185o F (-18o C to +85o C) operating temperature 2 rail, 2 & 4 bearing, 4 & 8 inch long carriages Recirculating linear ball bearing system Precision ground square rail design
150-WC0 series
Options
Chrome plated linear bearings, rails and screws End of travel (EOT) and home switches wired CAD drawings available via the internet Adapter brackets for non-NEMA motors Linear and rotary incremental encoders NEMA 23 & 34 motor wrap packages NEMA 34 adapter bracket Power-off electric brakes Vertical angle bracket Turcite nut option Motor couplings Hand crank Ball screws: Rolled - Non-preloaded & Preloaded Nuts:
0.625 0.625 0.750 0.750 inch inch inch inch diameter, diameter, diameter, diameter, 0.200 1.000 0.200 0.500 inch inch inch inch lead lead lead lead
150-WC1 series
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic Horizontal Dynamic Horizontal Static Horizontal Dynamic Roll Moment Dynamic Roll Moment Static Roll Moment Dyn. Pitch & Yaw Moment Dyn. Pitch & Yaw Moment Static Pitch & Yaw Moment Each Bearing Dyn. Capacity Each Bearing Dyn. Capacity
2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel
- Screw Drive -
150 Series
8 inch (4 bearing) Carriage 3,800 1,020 6,800 lbs lbs lbs ( 1724 ( 463 kg) kg) kg)
4 inch (2 bearing) Carriage 1,900 510 3,400 lbs lbs lbs ( ( 862 231 kg) kg) kg)
( 1542 ( ( ( ( ( ( ( ( ( ( (
2
( 3084 ( (
285 ft-lbs 77 ft-lbs 515 ft-lbs 56 ft-lbs 15 ft-lbs 100 ft-lbs 950 255 1,700 895 240 lbs lbs lbs lbs lbs (
386 N-m) 104 N-m) 698 N-m) 76 N-m) 20 N-m) 136 N-m) 431 115 771 406 109 kg) kg) kg) kg) kg)
2
575 ft-lbs 155 ft-lbs 1,030 ft-lbs 700 ft-lbs 190 ft-lbs 1,255 ft-lbs 950 255 1,700 895 240 lbs lbs lbs lbs lbs
2
( 1702 N-m) ( ( ( ( ( 431 115 771 406 109 kg) kg) kg) kg) kg)
Each Bearing Static Load Capacity Thrust Force Capacity Thrust Force Capacity Maximum Acceleration d1 d2 dr
Center to center distance (spread) between the two rails Center to center distance (spacing) of the bearings on a single rail Center distance of the bearing to top of carriage plate surface 10 million screw revolutions 500 million screw revolutions
386 in/sec
772 in/sec
4.300 in 1.250 in
(109,2
4.300 in 4.900 in
( 31,8
mm)
1.250 in
Other Table Material Linear Rail Material Screw Material Screw Material Unidirectional Repeatability Bidirectional Repeatability Straightness Flatness Orthogonality (multi-axis systems) Friction Coefficient Motor Mount Coupling Waycover Material
For 4 inch (2 bearing) & 8 inch (4 bearing) Carriages Base, Carriage, & End Plates - 6061 anodized aluminum Case Hardened Steel Acme Screw - Stainless Steel Rolled Ball, Precision Ball, & Ground Ball - Case Hardened Steel +/- 0.0001 in (2,5 microns) to +/- 0.0002 in (5 microns) - depends on selected screw +/- 0.0001 in (2,5 microns) to +/- 0.0082 in (208 microns) - depends on selected screw < 0.00004 in/in < 0.00004 in/in (< (< 1,02 1,02 microns/25mm) microns/25mm)
< 15 arc-seconds < 0.01 NEMA 23 & 34 Mounts, Metric Mounts, Motor Wraps, and Hand Crank Option Three (3) different styles available Hypilon Polyester Bellows firmly mounted to carriage & end plates
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features
- Screw Drive -
200 Series
Compact 8.500 inches (216 mm) wide by 3.750 inches (95 mm) tall Travel lengths from 6 inches (150 mm) to 55 inches (1395 mm) Threaded stainless steel inserts in carriage for load mounting 0o F to +185o F (-18o C to +85o C) operating temperature 2 rail, 2 & 4 bearing, 6 & 12 inch long carriages Recirculating linear ball bearing system Precision ground square rail design
200-WC0 series
Options
Chrome plated linear bearings, rails and screws End of travel (EOT) and home switches wired CAD drawings available via the internet Adapter brackets for non-NEMA motors Linear and rotary incremental encoders NEMA 23 & 34 motor wrap packages NEMA 34 adapter bracket Power-off electric brakes Vertical angle bracket Turcite nut option Motor couplings Hand crank
200-WC1 series
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic Horizontal Dynamic Horizontal Static Horizontal Dynamic Roll Moment Dynamic Roll Moment Static Roll Moment Dyn. Pitch & Yaw Moment Dyn. Pitch & Yaw Moment Static Pitch & Yaw Moment Each Bearing Dyn. Capacity Each Bearing Dyn. Capacity
2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel
- Screw Drive -
200 Series
12 inch (4 bearing) Carriage 8,800 2,360 15,200 lbs lbs lbs ( 3992 ( 1070 ( 6895 kg) kg) kg)
6 inch (2 bearing) Carriage 4,400 1,180 7,600 lbs lbs lbs ( 1996 ( 535 kg) kg) kg)
( 3447
790 ft-lbs 210 ft-lbs 1,365 ft-lbs 175 ft-lbs 47 ft-lbs 300 ft-lbs 2,200 590 3,800 1,050 270 lbs lbs lbs lbs lbs
2
1,580 ft-lbs 425 ft-lbs 2,730 ft-lbs 2,485 ft-lbs 670 ft-lbs 4,300 ft-lbs 2,200 590 3,800 1,050 270 lbs lbs lbs lbs lbs
2
( 1851 N-m) ( ( ( ( ( 237 N-m) 64 N-m) 407 N-m) 998 265 kg) kg) kg) kg) kg)
2
Each Bearing Static Load Capacity Thrust Force Capacity Thrust Force Capacity Maximum Acceleration d1 d2 dr
Center to center distance (spread) between the two rails Center to center distance (spacing) of the bearings on a single rail Center distance of the bearing to top of carriage plate surface 10 million screw revolutions 500 million screw revolutions
386 in/sec
772 in/sec
5.280 in 1.900 in
(134,1
5.280 in 7.870 in
( 48,3
mm)
1.900 in
Other Table Material Linear Rail Material Screw Material Screw Material Unidirectional Repeatability Bidirectional Repeatability Straightness Flatness Orthogonality (multi-axis systems) Friction Coefficient Motor Mount Coupling Waycover Material
For 6 inch (2 bearing) & 12 inch (4 bearing) Carriages Base, Carriage, & End Plates - 6061 anodized aluminum Case Hardened Steel Acme Screw - Stainless Steel Rolled Ball, Precision Ball, & Ground Ball - Case Hardened Steel +/- 0.0001 in (2,5 microns) to +/- 0.0002 in (5 microns) - depends on selected screw +/- 0.0001 in (2,5 microns) to +/- 0.0082 in (208 microns) - depends on selected screw < 0.00004 in/in < 0.00004 in/in (< (< 1,02 1,02 microns/25mm) microns/25mm)
< 15 arc-seconds < 0.01 NEMA 23 & 34 Mounts, Metric Mounts, Motor Wraps, and Hand Crank Option Three (3) different styles available Hypilon Polyester Bellows firmly mounted to carriage & end plates
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features
- Screw Drive -
250 Series
Compact 10.0 inches (254 mm) wide by 4.875 inches (124 mm) tall Travel lengths from 6 inches (150 mm) to 56 inches (1420 mm) Threaded stainless steel inserts in carriage for load mounting 0o F to +185o F (-18o C to +85o C) operating temperature 2 rail, 2 & 4 bearing, 6 & 12 inch long carriages Recirculating linear ball bearing system Precision ground square rail design
250-WC0 series
Options
Chrome plated linear bearings, rails and screws End of travel (EOT) and home switches wired CAD drawings available via the internet Adapter brackets for non-NEMA motors Linear and rotary incremental encoders NEMA 34 & 42 motor wrap packages NEMA 42 adapter bracket Power-off electric brakes Vertical angle bracket Turcite nut option Motor couplings Ball screws: Rolled - Non-preloaded & Preloaded Nuts:
1.000 inch diameter, 0.250 inch lead 1.000 inch diameter, 0.500 inch lead 1.000 inch diameter, 1.000 inch lead
250-WC1 series
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic Horizontal Dynamic Horizontal Static Horizontal Dynamic Roll Moment Dynamic Roll Moment Static Roll Moment Dyn. Pitch & Yaw Moment Dyn. Pitch & Yaw Moment Static Pitch & Yaw Moment Each Bearing Dyn. Capacity Each Bearing Dyn. Capacity
2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel
- Screw Drive -
250 Series
12 inch (4 bearing) Carriage 16,600 4,455 27,200 lbs lbs lbs ( 7530 ( 2020 (12338 kg) kg) kg)
6 inch (2 bearing) Carriage 8,300 2,225 13,600 lbs lbs lbs ( 3765 ( 1009 ( 6169 kg) kg) kg)
1,655 ft-lbs 445 ft-lbs 2,715 ft-lbs 455 ft-lbs 121 ft-lbs 635 ft-lbs 4,150 1,115 6,800 1,685 455 lbs lbs lbs lbs lbs
2
3,310 ft-lbs 895 ft-lbs 5,425 ft-lbs 3,930 ft-lbs 1,065 ft-lbs 6,450 ft-lbs 4,150 1,115 6,800 1,685 455 lbs lbs lbs lbs lbs
2
( 4488 N-m) ( 1213 N-m) ( 7355 N-m) ( 5328 N-m) ( 1444 N-m) ( 8745 N-m) ( 1882 ( 505 kg) kg) kg) kg) kg)
( 3681 N-m) ( ( ( 617 N-m) 164 N-m) 861 N-m) kg) kg) kg) kg) kg)
2
( 1882 ( 505
Each Bearing Static Load Capacity Thrust Force Capacity Thrust Force Capacity Maximum Acceleration d1 d2 dr
Center to center distance (spread) between the two rails Center to center distance (spacing) of the bearings on a single rail Center distance of the bearing to top of carriage plate surface 10 million screw revolutions 500 million screw revolutions
386 in/sec
772 in/sec
6.000 in 2.180 in
(152,4
6.000 in 6.730 in
( 55,4
mm)
2.180 in
Other Table Material Linear Rail Material Screw Material Screw Material Unidirectional Repeatability Bidirectional Repeatability Straightness Flatness Orthogonality (multi-axis systems) Friction Coefficient Motor Mount Coupling Waycover Material
For 6 inch (2 bearing) & 12 inch (4 bearing) Carriages Base, Carriage, & End Plates - 6061 anodized aluminum Case Hardened Steel Acme Screw - Stainless Steel Rolled Ball, Precision Ball, & Ground Ball - Case Hardened Steel +/- 0.0001 in (2,5 microns) to +/- 0.0002 in (5 microns) - depends on selected screw +/- 0.0001 in (2,5 microns) to +/- 0.0092 in (234 microns) - depends on selected screw < 0.00004 in/in < 0.00004 in/in (< (< 1,02 1,02 microns/25mm) microns/25mm)
< 15 arc-seconds < 0.01 NEMA 34 & 42 Mounts, Metric Mounts, Motor Wraps, and Hand Crank Option Three (3) different styles available Hypilon Polyester Bellows firmly mounted to carriage & end plates
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features
- Belt Drive -
440 Series
Compact 2.362 inches (56,00 mm) wide by 2.244 inches (57,00 mm) tall Travel lengths from 6 inches (150 mm) to 156 inches (3962 mm) Two row angular contact roller bearings, sealed roller housings Polyurethane belt with high strength steel tension members 0o F to +176o F (-20o C to +80o C) operating temperature Threaded metric holes in carriage for load mounting Hardened Precision ground shaft for carriage rollers Belt tensioning at ends of carriage, both sides Dynamic load capacity to 575 lbs (2557 N) 2 rails, single or dual carriages
440 series
Options
End of travel (EOT) and home switches wired CAD drawings available upon request Adapter brackets for non-NEMA motors NEMA 34 adapter bracket Power-off electric brakes Carriage adapter plates Motor couplings Gearheads
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic CZ - Horizontal Dynamic CZ - Horizontal Static CZ - Horizontal Dynamic CY - Horizontal Dynamic CY - Horizontal Static CY - Horizontal Dynamic MR - Moment Dynamic MR - Moment Static MR - Moment Dynamic MP - Moment Dynamic MP - Moment Static MP - Moment Dynamic MY - Moment Dynamic MY - Moment Static MY - Moment Maximum Belt Tensile Force Maximum Carriage Thrust Force Maximum Speed Maximum Acceleration CZ
2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel
- Belt Drive -
440 Series
442 - dual carriage N) N) N) N) N) N) 275 74 317 575 155 680 lbs lbs lbs lbs lbs lbs ( 1223 ( 329 ( 1411 ( 2557 ( 689 ( 3026 ( (
(1)
441 - single carriage 170 46 195 355 96 419 lbs lbs lbs lbs lbs lbs ( 760 ( 204 ( 871 (1579 ( 427 (1868
N) N) N) N) N) N)
4.49 ft-lbs 1.21 ft-lbs 5.16 ft-lbs 14.00 ft-lbs 3.80 ft-lbs 16.07 ft-lbs 29.50 ft-lbs 8.00 ft-lbs 34.44 ft-lbs 225 103 lbs lbs
( 6.0 N-m) ( 1.6 N-m) ( 7.0 N-m) ( 18.9 N-m) ( 5.1 N-m) ( 21.8 N-m) ( 40.0 N-m) ( 10.8 N-m) ( 46.7 N-m) (1000 ( 458 N) N)
7.22 ft-lbs 1.95 ft-lbs 8.33 ft-lbs 68.00 ft-lbs 18.45 ft-lbs 78.03 ft-lbs 141.00 ft-lbs 38.20 ft-lbs 167.42 ft-lbs 225 103 lbs lbs
( 11.3 N-m) ( 92.2 N-m) ( 25.0 N-m) (105.8 N-m) (191.1 N-m) ( 51.8 N-m) (227.0 N-m) ( 1000 ( 458 ( 5 N) N)
m/sec)
(40 m/sec2)
CY
MR
MP
MY
Other System Material Linear Shaft Material, Rollers Belt Properties Drive Pulley Weight Drive Pulley Diameter Drive Lead Belt Stretch - x Load (lbs or N) Unidirectional Repeatability Bidirectional Repeatability Position Accuracy (Belt) Friction Coefficient Breakaway Torque
For Single or Double Carriages Base, Carriage & End Housings - 6061 anodized aluminum Case Hardened Steel, 2 Row Steel Angular Contact Bearing 10 mm wide, Black Polyurethane, Steel reinforced belt 0.10 1.208 3.937 lbs in in ( ( ( ( 0,220 30,69 100,00 kg) mm) mm)
0.00021 in/ft per lbs +/- 0.002 +/- 0.004 < 0.010 in in in/ft
< 30 oz-in
(0,530 N-m)
ELECTROMATE
More Information via the Web
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features
- Belt Drive -
140 Series
Compact 2.875 inches (73 mm) wide by 3.000 inches (76 mm) tall Travel lengths from 4 inches (100 mm) to 10 feet (3,0 meters) Threaded stainless steel inserts in carriage for load mounting Polyurethane belt with high strength steel tension members 0o F to +176o F (-18o C to +80o C) operating temperature Single screw belt tensioning with self locking thread Dynamic Load Capacity to 200 lbs (90 kg) Recirculating linear ball bearing system Precision ground square rail design 1 rail, 1 or 2 bearing carriages
140-CP0 series
Options
AUTOCAD drawings available via the internet End of travel (EOT) and home switches wired Adapter brackets for non-NEMA motors Chrome plated linear bearings & rails Rotary incremental encoders NEMA 34 adapter bracket Power-off electric brakes Carriage adapter plates Vertical angle bracket Motor couplings
140-CP1 series
140-CP2 series
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic Horizontal Dynamic Horizontal Static Horizontal Dynamic Roll Moment Dynamic Roll Moment Static Roll Moment Dyn. Pitch & Yaw Moment Dyn. Pitch & Yaw Moment Static Pitch & Yaw Moment Each Bearing Dyn. Capacity Each Bearing Dyn. Capacity
2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel
- Belt Drive -
140 Series
Two (2) Bearing Carriage 200 54 400 lbs lbs lbs ( ( 90 24 kg) kg) kg) N-m) N-m) N-m) N-m) N-m) N-m) kg) kg) kg) kg) kg)
One (1) Bearing Carriage 100 27 200 lbs lbs lbs ( 45 ( 12 ( 90 ( 11 ( 3 kg) kg) kg) N-m) N-m) N-m) N-m) N-m) N-m) kg) kg) kg) kg) kg) m/sec ) m/sec )
2
( 180 ( ( ( ( ( ( ( ( ( 22 6 38 20 6 40 45 12 90
8 ft-lbs 2 ft-lbs 14 ft-lbs 4 ft-lbs 1 ft-lbs 8 ft-lbs 100 27 200 250 115 lbs lbs lbs lbs lbs ( ( ( ( ( (
16 ft-lbs 4 ft-lbs 28 ft-lbs 15 ft-lbs 4 ft-lbs 30 ft-lbs 100 27 200 250 115 lbs lbs lbs lbs lbs
( 19 5,4 1,9 10 45 12 90
Each Bearing Static Load Capacity Maximum Belt Tensile Force Maximum Carriage Thrust Force Maximum Speed Maximum Acceleration d2 dr
Center to center distance (spacing) of each bearing on a single rail Center distance of the bearing to top of carriage plate surface
( 113 ( 52
( 113 ( ( 2 52
( 2 ( 4,9 -
m/sec )
1.375 in
Other Table Material Linear Rail Material Belt Properties Drive Pulley Weight Drive Pulley Diameter Drive Lead Belt Stretch - x Load (lbs or N) Unidirectional Repeatability Bidirectional Repeatability Position Accuracy (Belt) Orthogonality (multi-axis systems) Friction Coefficient Breakaway Torque Motor Mount Coupling
For One (1) & Two (2) Bearing Carriages Base, Carriage, End Plates, & Cover Plate - 6061 anodized aluminum Stainless Steel Black, 16 mm wide, Polyurethane, Steel reinforced belt 0.21 1.128 3.543 lbs in in ( ( ( ( 0,10 28,65 90,00 kg) mm) mm)
0.00025 in/ft per lbs +/- 0.001 +/- 0.004 < 0.005 in in in/ft
NEMA 23 & 34 Mounts, Metric Mounts, and Gearheads Two (2) different styles available
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features
- Belt Drive -
120 Series
Compact 3.500 inches (89 mm) wide by 3.000 inches (76 mm) tall Travel lengths from 4 inches (100 mm) to 10 feet (3,0 meters) Threaded stainless steel inserts in carriage for load mounting Polyurethane belt with high strength steel tension members 0o F to +176o F (-18o C to +80o C) operating temperature Single screw belt tensioning with self locking thread Dynamic Load Capacity to 3,100 lbs (1406 kg) Recirculating linear ball bearing system Precision ground square rail design 2 rails, 2 or 4 bearing carriages
120 series
Options
End of travel (EOT) and home switches wired CAD drawings available via the internet Adapter brackets for non-NEMA motors Chrome plated linear bearings & rails Rotary incremental encoders NEMA 34 adapter bracket Power-off electric brakes Carriage adapter plates Vertical angle bracket Motor couplings
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic Horizontal Dynamic Horizontal Static Horizontal Dynamic Roll Moment Dynamic Roll Moment Static Roll Moment Dyn. Pitch & Yaw Moment Dyn. Pitch & Yaw Moment Static Pitch & Yaw Moment Each Bearing Dyn. Capacity Each Bearing Dyn. Capacity
2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel
- Belt Drive -
120 Series
Four (4) Bearing Carriage 3,100 840 4,720 lbs lbs lbs ( 1406 ( 381 kg) kg) kg)
Two (2) Bearing Carriage 1,550 415 2,360 lbs lbs lbs ( ( 703 188 kg) kg) kg)
( 1070 ( ( ( ( ( ( ( ( ( ( ( ( 3
( 2140 ( ( ( ( ( ( ( ( ( ( ( ( 3
140 ft-lbs 37 ft-lbs 210 ft-lbs 18 ft-lbs 5 ft-lbs 30 ft-lbs 775 208 1,180 250 115 lbs lbs lbs lbs lbs
190 N-m) 50 N-m) 285 N-m) 24 N-m) 7 N-m) 41 N-m) 351 94 535 113 52 kg) kg) kg) kg) kg)
280 ft-lbs 75 ft-lbs 425 ft-lbs 240 ft-lbs 65 ft-lbs 365 ft-lbs 775 208 1,180 250 115 lbs lbs lbs lbs lbs
379 N-m) 101 N-m) 576 N-m) 325 N-m) 88 N-m) 495 N-m) 351 94 535 113 52 kg) kg) kg) kg) kg)
Each Bearing Static Load Capacity Maximum Belt Tensile Force Maximum Carriage Thrust Force Maximum Speed Maximum Acceleration d1 d2 dr
Center to center distance (spread) between the two rails Center to center distance (spacing) of the bearings on a single rail Center distance of the bearing to top of carriage plate surface
m/sec)
2
m/sec)
2.375 in
2.375 in 2.088 in
1.375 in
( 34,9
mm)
1.375 in
Other Table Material Linear Rail Material Belt Properties Drive Pulley Weight Drive Pulley Diameter Drive Lead Belt Stretch - x Load (lbs or N) Unidirectional Repeatability Bidirectional Repeatability Position Accuracy (Belt) Orthogonality (multi-axis systems) Friction Coefficient Breakaway Torque Motor Mount Coupling
For Two (2) & Four (4) Bearing Carriages Base, Carriage, End Plates, & Cover Plate - 6061 anodized aluminum Stainless Steel Black, 16 mm wide, Polyurethane, Steel reinforced belt 0.21 1.128 3.543 lbs in in ( ( ( ( 0,10 28,65 90,00 0,00476 kg) mm) mm) mm/m per N) mm) mm) mm/300mm)
NEMA 23 & 34 Mounts, Metric Mounts, and Gearheads Two (2) different styles available
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features
180 Series
Compact 6.0 inches (152 mm) wide by 2.953 inches (75 mm) tall Travel lengths from 6 inches (150 mm) to 108 inches (2740 meters) Threaded stainless steel inserts in carriage for load mounting Polyurethane belt with high strength steel tension members 0o F to +176o F (-18o C to +80o C) operating temperature Single screw belt tensioning with self locking thread Dynamic Load Capacity to 5,600 lbs (2540 kg) 2 rails, 2 or 4 bearing, 6 inch long carriage Recirculating linear ball bearing system Precision ground square rail design
180-CP0 series
Options
End of travel (EOT) and home switches wired CAD drawings available via the internet Adapter brackets for non-NEMA motors Chrome plated linear bearings & rails Rotary incremental encoders NEMA 34 adapter bracket Power-off electric brakes Carriage adapter plates Planetary gearheads Motor couplings
180-CP1 series
180-CP2 series
180-WC1 series
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic Horizontal Dynamic Horizontal Static Horizontal Dynamic Roll Moment Dynamic Roll Moment Static Roll Moment Dyn. Pitch & Yaw Moment Dyn. Pitch & Yaw Moment Static Pitch & Yaw Moment Each Bearing Dyn. Capacity Each Bearing Dyn. Capacity
180 Series
Four (4) Bearing Carriage 7,780 2,090 11,660 lbs lbs lbs ( 3530 ( 948 kg) kg) kg)
Two (2) Bearing Carriage 3,890 1,045 5,830 lbs lbs lbs ( 1765 ( 474 kg) kg) kg)
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
( 2645 ( (
( 5290
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
1,025 ft-lbs 275 ft-lbs 1,830 ft-lbs 930 ft-lbs 250 ft-lbs 1,670 ft-lbs 1,945 525 2,910 350 230 lbs lbs lbs lbs lbs
( 1240 N-m) ( ( ( ( ( 96 N-m) 26 N-m) 170 N-m) 882 238 kg) kg) kg) kg) kg)
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
Each Bearing Static Load Capacity Maximum Belt Tensile Force Maximum Carriage Thrust Force Maximum Speed Maximum Acceleration d1 d2 dr
Center to center distance (spread) between the two rails Center to center distance (spacing) of the bearings on a single rail Center distance of the bearing to top of carriage plate surface
m/sec)
2
m/sec)
3.660 in
3.660 in 3.290 in
1.320 in
( 33,53
mm)
1.320 in
Other Table Material Linear Rail Material Belt Properties Drive Pulley Weight Drive Pulley Diameter Drive Lead Belt Stretch - x Load (lbs or N) Unidirectional Repeatability Bidirectional Repeatability Position Accuracy (Belt) Orthogonality (multi-axis systems) Friction Coefficient Breakaway Torque Motor Mount Coupling Waycover Material
For Two (2) & Four (4) Bearing Carriages Base, Carriage, End Plates, & Cover Plate - 6061 anodized aluminum Case Hardened Steel Black, 32 mm wide, Polyurethane, Steel reinforced belt 0.39 1.128 3.543 lbs in in ( ( ( ( 0,18 28,65 90,00 kg) mm) mm)
0.00011 in/ft per lbs +/- 0.001 +/- 0.004 < 0.005 in in in/ft
NEMA 23 & 34 Mounts, Metric Mounts, and Gearheads Two (2) different styles available Hypilon Polyester Bellows mounted to carriage & end plates
Sold & Serviced By:
ELECTROMATE
More Information via the Web
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features
180 Series
Compact 6.0 inches (152 mm) wide by 2.953 inches (75 mm) tall Travel lengths from 6 inches (150 mm) to 108 inches (2740 meters) Threaded stainless steel inserts in carriage for load mounting Polyurethane belt with high strength steel tension members 0o F to +176o F (-18o C to +80o C) operating temperature Single screw belt tensioning with self locking thread Dynamic Load Capacity to 5,600 lbs (2540 kg) 2 rails, 4 or 6 bearing, 12 inch long carriage Recirculating linear ball bearing system Precision ground square rail design
180-CP0 series
Options
End of travel (EOT) and home switches wired CAD drawings available via the internet Adapter brackets for non-NEMA motors Chrome plated linear bearings & rails Rotary incremental encoders NEMA 34 adapter bracket Power-off electric brakes Carriage adapter plates Planetary gearheads Motor couplings
180-CP1 series
180-CP2 series
180-WC1 series
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic Horizontal Dynamic Horizontal Static Horizontal Dynamic Roll Moment Dynamic Roll Moment Static Roll Moment Dyn. Pitch & Yaw Moment Dyn. Pitch & Yaw Moment Static Pitch & Yaw Moment Each Bearing Dyn. Capacity Each Bearing Dyn. Capacity
180 Series
Six (6) Bearing Carriage 11,660 3,135 17,500 lbs lbs lbs ( 5280 ( 1420 ( 7930 kgf) kgf) kgf)
Four (4) Bearing Carriage 7,780 2,090 11,660 lbs lbs lbs ( 3530 ( 948 kgf) kgf) kgf)
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
( 5290
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
1,540 ft-lbs 410 ft-lbs 2,750 ft-lbs 2,235 ft-lbs 600 ft-lbs 3,980 ft-lbs 1,945 525 2,910 350 230 lbs lbs lbs lbs lbs
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
2 million inches (50 km) of travel 100 million inches (2540 km) of travel
Each Bearing Static Load Capacity Maximum Belt Tensile Force Maximum Carriage Thrust Force Maximum Speed Maximum Acceleration d1 d2 dr
Center to center distance (spread) between the two rails Center to center distance (spacing) of the bearings on a single rail Center distance of the bearing to top of carriage plate surface
m/sec)
2
m/sec)
Other Table Material Linear Rail Material Belt Properties Drive Pulley Weight Drive Pulley Diameter Drive Lead Belt Stretch - x Load (lbs or N) Unidirectional Repeatability Bidirectional Repeatability Position Accuracy (Belt) Orthogonality (multi-axis systems) Friction Coefficient Breakaway Torque Motor Mount Coupling Waycover Material
For Four (4) & Six (6) Bearing Carriages Base, Carriage, End Plates, & Cover Plate - 6061 anodized aluminum Case Hardened Steel Black, 32 mm wide, Polyurethane, Steel reinforced belt 0.39 1.128 3.543 lbs in in ( ( ( ( 0,18 28,65 90,00 kg) mm) mm)
0.00011 in/ft per lbs +/- 0.001 +/- 0.004 < 0.010 in in in/ft
NEMA 23 & 34 Mounts, Metric Mounts, and Gearheads Two (2) different styles available Hypilon Polyester Bellows mounted to carriage & end plates
Sold & Serviced By:
ELECTROMATE
More Information via the Web
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features
- Belt Drive -
550 Series
10.236 inches (260 mm) long carriage with two M5 slots for load mounting Compact 3.15 inches (80 mm) wide by 3.937 inches (100 mm) tall Travel lengths from 12 inches (300 mm) to 30 feet (9,1 meters) Rigid belt driven design with fully enclosed aluminum housing 0o F to +176o F (-18o C to +80o C) operating temperature Two screw belt tensioning with self locking threads Dynamic Load Capacity to 10,500 lbs (4763 kg) Recirculating linear ball bearing system Precision ground square rail design 1 rail with 2 bearing carriages
Options
Angle brackets for multiple axis configurations End of travel (EOT) and home switches wired CAD drawings available via the internet Chrome plated linear bearings and rails Motor mounts for non-NEMA motors NEMA 34 & 42 motor mounts Rotary incremental encoders Power-off electric brakes Base mounting brackets Carriage adapter plates Planetary gearheads Motor couplings
Two bearing carriage 10,500 lbs (4763 kg) dynamic load capacity 410 ft-lbs (556 N-m) dynamic roll moment Less expensive than the 555 carriage Large moment load capability
Two bearing carriage 10,500 lbs (4763 kg) dynamic load capacity 410 ft-lbs (556 N-m) dynamic roll moment Self lubricating linear bearings Large moment load capability
Two bearing carriage 9,120 lbs (4136 kg) dynamic load capacity 172 ft-lbs (233 N-m) dynamic roll moment Less audible noise than the 553 or 554 series Sold & Serviced Smoother than the 553 or 554 carriageBy: ELECTROMATE Unique linear bearing design
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic Horizontal Dynamic Horizontal Static Horizontal Dynamic Roll Moment Dynamic Roll Moment Static Roll Moment Dyn. Pitch & Yaw Moment Dyn. Pitch & Yaw Moment Static Pitch & Yaw Moment Each Bearing Dyn. Capacity Each Bearing Dyn. Capacity
2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel 2 million inches (50 km) of travel 100 million inches (2540 km) of travel
- Belt Drive -
550 Series
555 Carriage kg) kg) kg) 9,120 2,450 14,700 lbs lbs lbs ( 4136 ( 1111 ( 6668 ( ( ( ( ( kg) kg) kg)
553 & 554 Carriages 10,500 2,820 15,400 lbs lbs lbs ( 4763 ( 1270 ( 6985 ( ( (
410 ft-lbs 111 ft-lbs 650 ft-lbs 1,215 ft-lbs 330 ft-lbs 1,775 ft-lbs 5,250 1,410 7,700 675 475 lbs lbs lbs lbs lbs
172 ft-lbs 47 ft-lbs 285 ft-lbs 510 ft-lbs 138 ft-lbs 845 ft-lbs 4,560 1,225 7,350 675 475 lbs lbs lbs lbs lbs
Each Bearing Static Load Capacity Maximum Belt Tensile Force Maximum Carriage Thrust Force Maximum Speed Maximum Acceleration d2 dr
Center to center distance (spacing) of each bearing on a single rail Center distance of the bearing to top of carriage plate surface
m/sec)
2
m/sec)
3.876 in 1.508 in
3.876 in 1.626 in
Other Table Material Linear Rail Material Belt Properties Drive Pulley Weight Drive Pulley Diameter Drive Lead Belt Stretch - x Load (lbs or N) Unidirectional Repeatability Bidirectional Repeatability Position Accuracy (Belt) Orthogonality (multi-axis systems) Friction Coefficient Breakaway Torque Motor Mount Coupling
553, 554 & 555 Carriages Base Extrusion, Carriage, & End Plates - 6061 anodized aluminum Case Hardened Steel
Black, 50 mm wide, Polyurethane, Steel reinforced belt
lbs in in
( ( ( (
0.00006 in/ft per lbs +/- 0.001 +/- 0.004 < 0.010 in in in/ft
NEMA 34 & 42 Mounts, Metric Mounts, and Gearheads Two (2) different styles available
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Introduction
Standard Features - 300 series
Worm gear drive NEMA 23 & 34 motor mounts Standard & Precision versions 45, 90, & 180:1 gear reductions Load capacity to 225 lbs (102 kg) 30 revs/sec maximum input speed 10 arc-sec unidirectional repeatability 6, 8, 10, & 12 inch table top diameters CAD drawings available via the internet 0.75 inch (19 mm) diameter through hole English & Metric inserts for load mounting
- Rotary Tables -
300 series
400 series
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Technical Reference
Specifications
Load Capacities Dynamic Horizontal Dynamic Inverted Static Horizontal Dynamic Moment Static Moment Maximum Input Speed Maximum Input Acceleration
(1 million revs) (1 million revs)
- Rotary Tables -
(1)
(1 million revs)
20 ft-lbs 25 ft-lbs 30 75
Other Table Material Worm Wheel Type Worm Gear Type Duty Cycle
(gear ratio) 45:1
300 series
400 series
Base & Table Top - 6061 black anodized aluminum Bronze (AGMA - class 10) Steel (AGMA - class 10) 60 %
90:1 180:1 30:1 90:1 180:1 270:1 360:1
Maximum Table Top Speed Worm Gear Efficiency Worm Gear Inertia Accuracy Unidirectional Repeatability Bidirectional Repeatability Backlash Runout (vertical runout)
(oz-in2)
40 rpm 50 % 0.03
20 rpm 60 % 0.03 < 150 arc-sec < < < 10 arc-sec 40 arc-sec 30 arc-sec 0.003 in 0.001 in 0.003 in 0.001 in
10 rpm 70 % 0.03
18 rpm 50 % 0.10
6 rpm 60 % 0.10
3 rpm 60 % 0.13
2 rpm 60 % 0.16
Standard Precision
(0,076 mm)
<
0.002 in
Standard Precision
<
0.002 in
(0,05 mm)
(5)
Standard Precision
80 arc-sec 40 arc-sec
<
60 arc-sec
(6)
Breakaway Torque
<
Footnotes:
(1) Dynamic load capacities & life are limited by the stresses exerted upon the worm gear assembly. (2) Measured at 6 inches (152,4 mm) from table top center. Total indicator runout. (3) Measured at 5.5 inches (139,7 mm) from table top center. Total indicator runout. (4) Measured at 0.75 inches (19,1 mm) from table top center. Total indicator runout. (5) Measured at 4.5 inches (114,3 mm) from table top center. Total indicator runout. (6) Based on the centerline of the table top.
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Configurations
LINTECH shafts, shaft assemblies, linear bearings, pillow blocks and carriage assemblies are used in many different applications requiring mechanical motion. These components are utilized with air cylinders, hydraulic actuators, lead screws, rack & pinion systems, belt & pulleys, chain & sprockets, as well as in manual positioning systems. LINTECH individual shafts or SA shaft assemblies, along with individual linear bearings or pillow blocks, are typically used when a designer wishes to spread apart the shafts or SA shaft assemblies and make a custom carriage assembly. The TRSA shaft assemblies and TRCA carriage assemblies are utilized together when ease of installation is of essence.
1 2 3
10
11
12
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Multi-Axis Configurations
LINTECH can provide adapter plates and vertical brackets, to facilitate the construction of X-Y, X-Z, and X-Y-Z mult-axis configurations. There are hundreds of possible configurations available. See below for some of the more common systems. LINTECH has experience dealing with multiple axis configurations. Sometimes different standard table series can be mounted to form a custom system. Other times, a custom assembly can be created. Contact LINTECH for more information.
1 2 3
10
11
12
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Design Considerations
Custom Systems LINTECH has been manufacturing custom positioning
assemblies and systems for use in a wide variety of applications for over 30 years. Some of these custom systems have been simple modifications of carriage assemblies, special base mounting hole patterns, nonstandard travel lengths, specific motor mount brackets, or different accessories such as couplings, encoders, or waycovers. Other more involved custom systems have been: * * * * * 30 x 30 x 30 foot X-Y-Z inspection stations 60 foot part placement machines 5,000 pound load capacity assembly stations. vacuum or wash down rated 9 axis special assembly machines
Application Data
Some of the more important information to provide us follows: Budget will become extremely important in our evaluation process with you. With our many years of experience building custom systems we will be able to determine if the required performance you are seeking is possible within your budget. Accuracy or Repeatability will make a big difference in the cost of a custom system. The accuracy of 0.0002 inches over 48 inches of travel will cost a whole lot more than a repeatability of 0.0002 inches over the same 48 inches of travel. Load Weight will have an impact on the linear bearing, drive assembly, and structure that we would design for the custom system. Providing a realistic estimated of load weight (along with any other potential external forces), without too much of a safety factor will help select the proper custom positioning components. We will use the proper safety factors based on your application details. Required System Life will also affect the selection of the proper components for the system. Systems Speeds may affect the cost of a custom system if larger, more expensive components are required to meet the application needs. Providing us with a realistic target speed helps create a successful custom system. Application Sketch (or diagram) can help minimize the time for us to respond to your request. Other Details such as waycovers, motor mounts, or carriage size my not seem like key items to mention. However, providing us with as much information on the application requirements will lead to the successful completion of a custom system.
All of these custom systems were successful by following a simple approach. Review, fill out, and provide all the information on the application guide shown on the next page. Providing us with all, or as much detail up front, can lead to the successful completion of a custom system. Then submit this information to LINTECH and we will review the data, to see if it is within our capabilities to manufacture.
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Design Considerations
Name Company Phone Date State
Application Guide
Z axis
O axis Y axis
X axis
Axis
Maximum Accel
(in/sec2 or m/sec2)
Load Weight
(lbs or kg)
Duty Cycle
(%)
Travel Length
(in or mm)
Table Life
(millions of inches or Km)
Repeatability
(in or mm)
Accuracy
(Overall - in or mm)
Maximum Speed
(in/sec or mm/sec)
Waycovers
(Yes or No)
Distance
(in or mm)
Encoder
(linear, rotary, & resolution)
Time
(sec)
Power-off Brake
(Yes or No)
Special Requirements
Moment Loads
Horizontal Application Side Mounted Application Vertical Application
d4 = d4 =
d3 =
W
d3 =
d4 =
d3 =
____________
(lbs or kg)
Application Details
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
Two individual X-Y axes for laser cutting process supported by steel structure
High speed X-Y laser marking assembly with a granite support structure
X-Y axis water jet cutting process Toll Free Phone (877) SERVO98 Free Fax (877) SERV099 with open frame steel support structure Tollwww.electromate.com
sales@electromate.com
ELECTROMATE
Belt driven long travel X-Y-Z inspection station with aluminum support structure
X-Y belt driven infared inspection station supported by movable aluminum structure
High accuracy X-Z vision inspection station (877) SERVO98 Toll Free Phone Toll Free Fax (877) SERV099 mounted on a steel sub plate www.electromate.com
sales@electromate.com
ELECTROMATE
Unit Conversions
Torque Conversions
Present Units
Gram-centimeters Gram-centimeters Gram-centimeters Gram-centimeters Newton-meters Newton-meters Newton-meters Newton-meters Ounce-inches Ounce-inches Ounce-inches Ounce-inches Pound-inches Pound-inches Pound-inches Pound-inches Pound-feet Pound-feet Pound-feet Pound-feet
Inertia Conversions
Multiply By Present Units
Gram-cm
2
Convert To
newton-meters ounce-inches
Convert To
ounce-inches
2
Multiply By
------0.0000981 --------0.0138874 pound-inches --------0.000868 pound-feet -----------0.0000723 gram-centimeters ---- 10,197.162 ounce-inches --------141.612 pound-inches --------8.85 pound-feet -----------0.73756 gram-centimeters ---72.0077 newton-meters ------0.007062 pound-inches --------0.0625 pound-feet -----------0.005208 gram-centimeters ---- 1,152.0 newton-meters ------0.11299 ounce-inches --------16.0 pound-feet -----------0.08333 gram-centimeters ---- 13,825.5 newton-meters ------1.3558 ounce-inches --------192.0 pound-inches --------12.0
Gram-cm2 Gram-cm2 Gram-cm2 Gram-cm2 Ounce-inches2 Ounce-inches2 Ounce-inches2 Ounce-inches2 Ounce-inches2 Ounce-inch-sec2 Ounce-inch-sec2 Ounce-inch-sec2 Ounce-inch-sec2 Ounce-inch-sec2 Pound-inches2 Pound-inches2 Pound-inches2 Pound-inches2 Pound-inches2 Pound-inch-sec2 Pound-inch-sec2
Distance Conversions
Present Units
Arc-minutes Arc-seconds Centimeters Centimeters Centimeters Degrees Degrees Degrees Feet Feet Inches Inches Inches Inches Inches Km Meters Meters Meters Microns Microns Microns Microns Millimeters Millimeters Radians
Convert To
degrees
Multiply By
----------0.016666 degrees ----------0.000277 inches -----------0.3937 feet --------------0.03280 microns ---------10,000.0 arc-minutes ----60.0 arc-seconds ----3,600.0 radians ---------0.017453 centimeters -----30.48 meters ----------0.3048 centimeters ----2.54 Km -------------0.0000254 meters ----------0.0254 microns ---------25,400.0 millimeters ----25.4 inches ----------39,370.0 feet -------------3.2808 inches -----------39.37 microns ---------- 1,000,000.0 centimeters ----0.0001 inches -----------0.00003937 meters ----------0.000001 millimeters ----0.001 inches -----------0.03937 microns ---------1,000.0 degrees ----------57.295779
---0.00546745 -0.000014161 pound-inches2 ---0.000341716 pound-inch-sec2 -0.000000885 pound-feet-sec2 -0.000000074 gram-cm2 --------182.901 ounce-inch-sec2 -0.00259008 pound-inches2 ---0.0625 pound-inch-sec2 -0.00016188 pound-feet-sec2 -0.00001349 gram-cm2 --------70,615.4 ounce-inches2 ---386.0 pound-inches2 ---24.13045 pound-inch-sec2 -0.0625 pound-feet-sec2 --0.00520833 gram-cm2 --------2,926.41 ounce-inches2 ---16.0 ounce-inch-sec2 -0.0414413 pound-inch-sec2 -0.00259008 pound-feet-sec2 -0.00021584 gram-cm2 --------- 1,129,850.0 ounce-inches2 ---6,177.4 ounce-inch-sec2 -16.0 pound-inches2 --386.0 pound-feet-sec2 -0.0833333 gram-cm2 --------- 13,558,200.0 ounce-inches2 --74,128.9 ounce-inch-sec2 -192.0 pound-inches2 --4,633.06 pound-inch-sec2 12.0
ounce-inch-sec2
Load Conversions
Present Units
Grams Grams Grams Kilograms Newtons Newtons Newtons Ounces Ounces Ounces Pounds Pounds Pounds Pounds Pounds Tons
Convert To
newtons ounces
Multiply By
----------------0.009806 ------------------0.03528 pounds -----------------0.002204 pounds -----------------2.2046 grams ------------------101.971 ounces -----------------3.59692 pounds -----------------0.224808 grams ------------------28.3495 newtons ----------------0.27802 pounds -----------------0.0625 grams ------------------453.592 kilograms --------------0.45359 newtons ----------------- Sold & Serviced By: 4.44824 ounces -----------------16.0 ELECTROMATE tons --------------------0.0005 Phone (877) SERVO98 Toll Free Toll Free Fax (877) SERV099 pounds ----------------- 2,000.0 www.electromate.com
sales@electromate.com
Terms of Sale
To Order
Any standard, or custom, product from LINTECH may be ordered by mail, email, on-line, phone, or fax from an Automation Specialist in your area. To obtain the name of your local Automation Specialist call:
Warranty
All LINTECH products are guaranteed to be free from defects in material and workmanship, under normal use, for a period of one year after date of shipment. This warranty covers the repair or replacement of a product when it is sent prepaid to LINTECH. LINTECH does not assume liability for installation, abuse, alteration, insufficient application data provided for a design, or misuse of any positioning system. Products furnished by LINTECH, but not manufactured by LINTECH (motors, gearheads, encoders, amplifiers, etc....), are subject to the manufacturers standard warranty terms and conditions.
LINTECH
Toll Free: Phone: Fax:
Web Site: E-Mail:
1845 Enterprise Way Monrovia, CA 91016 (800) 435 - 7494 (626) 358 - 0110 (626) 303 - 2035
www.LintechMotion.com Lintech@LintechMotion.com
All required options should be reviewed using the part numbering guide for each model series. Your local Automation Specialist or factory personnel can assist you with any questions you may have.
Returns
Any product requiring a return to LINTECH (for warranty or non-warranty repair) requires pre-approval from the factory prior to shipment. Contact the customer service department at (800) 435-7494 in order to obtain a RMA (Return Materials Authorization) number. At that time, please have your system Model & Serial numbers available, along with the reason for the return. The RMA number should be clearly marked on the returned package label and your packing list, or shipping document. Return product freight prepaid in its original package or one with comparable protection. LINTECH will not accept return shipments sent freight collect. Product damage incurred during return shipment, from poor packaging, will not be warranted by LINTECH. Keeping original packing materials is recommended until initial inspection and testing is completed.
Delivery
All shipping promises are made in good faith. Any shipping dates appearing on acknowledgments of orders or given to a customer in any other manner are approximate. Where the customer delays in supplying information necessary to proceeding with an order, the date of shipment may be extended accordingly. Standard products from LINTECH are usually available for delivery within 1 to 6 weeks of receipt of a purchase order. However, component shortages, labor disputes, or any other unforeseen circumstance may delay the delivery of an order. LINTECH shall not be held liable under any circumstance. All products are shipped F.O.B. Monrovia, CA. LINTECH packages all standard and custom products carefully. However, LINTECH is not liable for damage incurred during shipment. Contact the carrier immediately if damage to a package or shipment is noticed upon receipt of such shipment.
Payment Terms
Unless otherwise specified, payment shall be made by C.O.D, credit card (AMEX, Visa, or Master Card), or net thirty (30) days (pending credit approval) from date of shipment of the items purchased hereunder in U.S. currency. LINTECH reserves the right to require deposit payments on non-standard items, customs, or product built to Buyer's designs or specifications. Amounts not timely paid shall bear interest at the rate of 1.5% for each month or a portion thereof that Buyer is late in making payments. No responsibility is assumed by LINTECH for damages arising from delivery delays, fires, strikes, material shortages, accidents, or any other cause whatsoever, and purchase orders are accepted subject only to these conditions irrespective of statements or stipulations on purchase orders.
Cancellations
All items entered for production and on which a cancellation is requested shall be paid for on the basis of actual cost of labor, materials, and supplies applied to the production of such items plus proper overhead expenses determined in accordance with good accounting practice, plus 25% of the total of such cost and expenses; provided that such cost and expense plus 25% shall in no case exceed 100% of the quoted price of original order. Upon cancellation, LINTECH may dispose of materials used in the manufacture Sold & Serviced By: of cancelled order as it sees fit.
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
ELECTROMATE
LINTECH
1845 Enterprise Way Monrovia, CA. 91016 Phone: (800) 435 - 7494 (626) 358 - 0110 Fax: (626) 303 - 2035
Web Site: www.LintechMotion.com E-Mail: Lintech@LintechMotion.com
ELECTROMATE
Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com