Beruflich Dokumente
Kultur Dokumente
User Manual
Rev2.1 2011-3-10
Introduction
The UDB100x (UDB100xS) series of signal generators use direct digital synthesis (DDS) technology and field-programmable gate array (FPGA) design, with high stability and low distortion .characteristics. . 10Vp-p signal & TTL outputs with a 60MHz frequency counter input are standard features. The output signal level may also be reduced by -32dB (about 40 times), by pressing the attenuation switch on the front panel. This enables the output signal level to be reduced to a minimum. of about 10mV. The UDB100xS series have an additional sweep function, the start and end frequency and sweep time are user settable. Its the ideal equipment for electronic engineers, scientific research, production lines, teaching and the amateur hobbyist. .Technical Data 1. Signal Output Function
Output waveforms Output amplitude Output impedance DC offset Display Frequency range
Sine wave, Square wave and Triangle wave 9Vp-p (Max) 0.1Vp-p (MIN) (signal output, no load) 5010% (signal output) 2.5V (no load) LCD160 0.01Hz ~ 2MHz (UDB1002) 0.01Hz ~ 3MHz (UDB1003) -- Optional 0.01Hz ~ 5MHz (UDB1005) -- Optional Resolution 0.01Hz Frequency Stability 110-6 Frequency accuracy 510-6 Sine wave distortion 0.8% (reference frequency is 1kHz) Trinagle linearity 98% (0.01Hz~10kHz) Rise and fall time of square wave 100ns Square Wave Duty Cycle range 1%~99% (digital control mode) 2. TTL Output Function Frequency range Amplitude Fan Out 3. COUNTER Function Counter Range Frequency Meter Range Input Voltage Range Frequency range Sweep Time 0.01Hz ~ 2MHz (3MHz or 5MHz Optional) >3Vp-p >20 TTL loads 0-4294967295 1Hz~60MHz 0.5Vp-p~20Vp-p fM1 to fM2 (M1 M2 = saved presets 1&2) 1s~99s
5. Save/Load Function Up to 10 user configurable parameter presets (M0-M9) may be saved in memory and recalled as required. (Preset M0: is loaded by default at startup)