Sie sind auf Seite 1von 11

<5>[

0.000000] Linux version 2.6.32.9 (lg-electronics@falcon) (gcc version 4.


5.2 (Ubuntu/Linaro 4.5.2-5ubuntu2~ppa1) ) #27 PREEMPT Tue May 10 17:40:39 CST 20
11
<4>[
0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TE
J), cr=00c5387f
<4>[
0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
<4>[
0.000000] Machine: THUNDER Global board (LGE LGP500)
<6>[
0.000000] Partition (from atag) boot -- Offset:130 Size:22
<6>[
0.000000] Partition (from atag) system -- Offset:152 Size:5f0
<6>[
0.000000] Partition (from atag) recovery -- Offset:742 Size:28
<6>[
0.000000] Partition (from atag) lgdrm -- Offset:76a Size:16
<6>[
0.000000] Partition (from atag) splash -- Offset:780 Size:8
<6>[
0.000000] Partition (from atag) FOTABIN -- Offset:788 Size:c
<6>[
0.000000] Partition (from atag) FOTA -- Offset:794 Size:2e
<6>[
0.000000] Partition (from atag) misc -- Offset:7c2 Size:2
<6>[
0.000000] Partition (from atag) cache -- Offset:7c4 Size:200
<6>[
0.000000] Partition (from atag) userdata -- Offset:9c4 Size:63c
<4>[
0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[
0.000000] On node 0 totalpages: 120576
<7>[
0.000000] free_area_init_node: node 0, pgdat c0641cd8, node_mem_map c078
1000
<7>[
0.000000] Normal zone: 942 pages used for memmap
<7>[
0.000000] Normal zone: 0 pages reserved
<7>[
0.000000] Normal zone: 119634 pages, LIFO batch:31
<6>[
0.000000] allocating 28794880 bytes at c10c4000 (138c4000 physical) for
mdp pmem arena
<6>[
0.000000] allocating 11419648 bytes at c2c3a000 (1543a000 physical) for
adsp pmem arena
<6>[
0.000000] allocating 372736 bytes (at 80000 physical) for audio pmem are
na
<6>[
0.000000] allocating 614400 bytes at c371e000 (15f1e000 physical) for fb
<6>[
0.000000] allocating 114688 bytes at c3800000 (16000000 physical) for ke
rnel ebi1 pmem arena
<6>[
0.000000] allocating 2097152 bytes at c381c000 (at 1601c000 physical) fo
r KGSL
<6>[
0.000000] L210 cache controller enabled
<4>[
0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 119634
<5>[
0.000000] Kernel command line: mem=471M console=ttyMSM2,115200n8 android
boot.hardware=thunderg uart_console=disable lge.rev=rev_11 lge.hreset=off lge.re
boot=pwroff lge.lcd=on
<6>[
0.000000] UART CONSOLE : disable
<6>[
0.000000] BOARD: LGE rev_11
<6>[
0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[
0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes
)
<6>[
0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[
0.000000] Memory: 471MB = 471MB total
<5>[
0.000000] Memory: 427392KB available (5824K code, 1520K data, 144K init,
0K highmem)
<6>[
0.000000] Hierarchical RCU implementation.
<6>[
0.000000] NR_IRQS:261
<4>[
0.000000] Console: colour dummy device 80x30
<6>[
0.000000] Calibrating delay loop... 599.65 BogoMIPS (lpj=2998272)
<4>[
0.220151] Mount-cache hash table entries: 512
<6>[
0.220665] CPU: Testing write buffer coherency:
<1>[
0.220763] Initialized Zero page successfully
<4>[
0.220805] ok
<6>[
0.223388] NET: Registered protocol family 16
<3>[
0.225115] smem_find(137, 64): wrong size 56

<6>[
at=9
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<4>[
<4>[
<4>[
<4>[
<4>[
<6>[
<6>[
<6>[
<4>[
<5>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
)
<6>[
tes)
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<3>[
<6>[
<6>[
<6>[

0.225448] socinfo_init: v3, id=43, ver=1.2, raw_id=960, raw_ver=2, hw_pl


0.225478]
0.225491]
0.225658]
0.225786]
0.225803]
0.225831]
0.225858]
0.225883]
0.225910]
0.225936]
0.225963]
0.225988]
0.226015]
0.226041]
0.226058]
0.226795]
0.226811]
0.226821]
0.229226]
0.229241]
0.229440]
0.229490]
0.229513]
1.274191]
1.275850]
1.276330]
1.276670]
1.276918]
1.277518]
1.277638]
1.280380]
1.281465]
1.281483]
1.281505]
1.281910]
1.283965]
1.284170]

acpu_clock_init()
Shared PLL control available.
L val: PLL0: 50, PLL1: 12, PLL2: 62
ACPU running at 600000 KHz
Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
0 19200 -1 1 19200
1 30720 -1 -1 -1 1 4 3
1 120000 0 8 60000
2 61440 -1 -1 -1 5 4 3
2 122880 1 2 61440
2 61440 1 -1 -1 5 4 3
3 200000 2 6 66667
3 61440 1 2 -1 5 4 6
4 245760 1 1 122880
2 61440 1 2 3 7 -1 6
5 320000 0 3 160000
2 160000 1 2 3 7 -1 6
6 400000 2 3 133333
3 160000 5 4 3 7 -1 8
7 480000 0 2 160000
3 160000 5 4 6 -1 -1 8
8 600000 2 2 200000
3 200000 7 -1 6 -1 -1 -1
5 scaling frequencies supported.
FB START PHYS ADDR : 2ff40000
FB START VIRT ADDR : dd880000
FB SIZE : 4b000
RAM CONSOLE START ADDR : 804257792
RAM CONSOLE END ADDR : 804519935
ram_console: got buffer at 2ff00000, size 40000
ram_console: no valid data in buffer (sig = 0x00404000)
console [ram-1] enabled
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
msm_i2c_probe
msm_i2c_probe: clk_ctl 315, 400000 Hz
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Switching to clocksource dg_timer
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes

1.284681] TCP established hash table entries: 16384 (order: 5, 131072 by


1.285175]
1.285496]
1.285515]
1.285711]
1.286080]
1.286098]
1.286113]
1.286361]
1.381263]
1.384336]
1.384358]
1.384468]
1.384490]
1.384710]
1.384918]
1.385280]
1.385988]
1.386455]

TCP bind hash table entries: 16384 (order: 4, 65536 bytes)


TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 780K
smd probe
smd_core_init()
smd_core_init() done
smd_alloc_loopback_channel: 'local_loopback' cid=100
smd_alloc_channel() 'DS' cid=0
Notify: smsm init
smd_alloc_channel() 'DIAG' cid=1
smd_alloc_channel() 'RPCCALL' cid=2
smd_alloc_channel() 'DATA1' cid=7

<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<4>[
<4>[
<6>[
<6>[
<6>[
<4>[
<6>[
<6>[
<6>[
<6>[
<4>[
<6>[
<6>[
<6>[
<6>[
<4>[
<6>[
<6>[
<6>[
<4>[
<4>[

1.386856]
1.387253]
1.387645]
1.388058]
1.388410]
1.388798]
1.389203]
1.389606]
1.389971]
1.390426]
1.390870]
1.391803]
1.392956]
1.393066]
1.393858]
1.398700]
1.398731]
1.398750]
1.398768]
1.398783]
1.398798]
1.398818]
1.398835]
1.398850]
1.398865]
1.398881]
1.398901]
1.398916]
1.398931]
1.398946]
1.398963]
1.398978]
1.398996]
1.399013]
1.399030]
1.399045]
1.399060]
1.413425]
1.414460]
1.415771]
1.418026]
1.418670]
1.418678]
1.418685]
1.418708]
1.419328]
1.420801]
1.420875]
1.445775]
1.447576]
1.447625]
1.455806]
1.455915]
1.455931]
1.457855]
1.458438]
1.459221]
1.459808]
1.470593]
1.471103]

smd_alloc_channel() 'DATA2' cid=8


smd_alloc_channel() 'DATA3' cid=9
smd_alloc_channel() 'DATA4' cid=10
smd_alloc_channel() 'DATA5' cid=11
smd_alloc_channel() 'DATA6' cid=12
smd_alloc_channel() 'DATA7' cid=13
smd_alloc_channel() 'DATA11' cid=17
smd_alloc_channel() 'DAL00' cid=38
smd_alloc_channel() 'DATA5_CNTL' cid=39
smd_alloc_channel() 'DATA6_CNTL' cid=40
smd_alloc_channel() 'DATA7_CNTL' cid=41
SMD Packet Port Driver Initialized.
SMD: ch 2 0 -> 1
SMD: ch 2 1 -> 2
[adsp.c:adsp_init] rs3000000a -- 0
[audpp.c:audpp_probe] Number of decoder supported 5
[audpp.c:audpp_probe] Number of concurrency supported 7
[audpp.c:audpp_probe] module_name:AUDPLAY0TASK
[audpp.c:audpp_probe] queueid:13
[audpp.c:audpp_probe] decid:0
[audpp.c:audpp_probe] nr_codec_support:11
[audpp.c:audpp_probe] module_name:AUDPLAY1TASK
[audpp.c:audpp_probe] queueid:14
[audpp.c:audpp_probe] decid:1
[audpp.c:audpp_probe] nr_codec_support:5
[audpp.c:audpp_probe] module_name:AUDPLAY2TASK
[audpp.c:audpp_probe] queueid:15
[audpp.c:audpp_probe] decid:2
[audpp.c:audpp_probe] nr_codec_support:5
[audpp.c:audpp_probe] module_name:AUDPLAY3TASK
[audpp.c:audpp_probe] queueid:16
[audpp.c:audpp_probe] decid:3
[audpp.c:audpp_probe] nr_codec_support:4
[audpp.c:audpp_probe] module_name:AUDPLAY4TASK
[audpp.c:audpp_probe] queueid:17
[audpp.c:audpp_probe] decid:4
[audpp.c:audpp_probe] nr_codec_support:1
thunderg_gpio_earsense_work_func: ear sense detected : ejected
thunderg_gpio_earsense_work_func: ear sense detected : ejected
[Blue Debug] lge_error_handler_init
lge_tempdevice_init
RPC_TIME_TOD_SET_APPS_BASES:
tick = 137309
stamp = 808464432
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
lge_mtd_direct_access_init: finished
LGE Power Sink Driver Init
lge_pwrsink_probe: setting driver data
ashmem: initialized
yaffs May 5 2011 03:08:46 Installing.
msgmni has been set to 836
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
AAT28XX init start
msm_fb_probe: phy_Addr = 0x15f1e000 virt = 0xdda00000
MDP HW Base phy_Address = 0xaa200000 virt = 0xddb00000
primary mddi base phy_addr = 0xaa600000 virt = 0xdd854000
mddi_hitachi_lcd_probe: started.
mddi_hitachi_lcd_init: setting up panel info.

<4>[
1.471448] mddi_hitachi_lcd_probe: started.
<4>[
1.502048] mddi_hitachi_lcd_on: started.
<4>[
1.502680] Console: switching to colour frame buffer device 40x30
<6>[
1.502763] FrameBuffer[0] 320x480 size=614400 bytes is registered success
fully!
<6>[
1.519970] msm_serial: driver initialized
<6>[
1.520183] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM
HS UART
<6>[
1.520818] msm_serial_hs module loaded
<6>[
1.526330] brd: module loaded
<6>[
1.531276] loop: module loaded
<6>[
1.531451] pmem: Initializing pmem_kernel_ebi1 (in-kernel)
<6>[
1.531570] pmem: Initializing pmem (user-space) as cached
<6>[
1.533151] pmem: Initializing pmem_adsp (user-space) as non-cached
<6>[
1.534030] pmem: Initializing pmem_audio (user-space) as non-cached
<6>[
1.534693] LGE: Android Vibrator Driver Init
<6>[
1.535205] LGE: Android Vibrator Initialization was done
<4>[
1.535661] atcmd_probe:alohag_atcmd
<6>[
1.537443] SCSI Media Changer driver v0.25
<6>[
1.538120] msm_nand_probe: phys addr 0xa0a00000
<6>[
1.538143] msm_nand_probe: dmac 0x7
<6>[
1.538198] msm_nand_probe: allocated dma buffer at ffc0f000, dma_addr 2f0
16000
<6>[
1.538903] ONFI probe : CRC Check failed on ONFI Parameter data
<6>[
1.538960] status: e00020
<6>[
1.538975] nandid: 5510bcad maker ad device bc
<6>[
1.538990] Found a supported NAND device
<6>[
1.539003] NAND Id : 0x5510bcad
<6>[
1.539016] Buswidth : 16 Bits
<6>[
1.539028] Density : 512 MByte
<6>[
1.539041] Pagesize : 2048 Bytes
<6>[
1.539053] Erasesize: 131072 Bytes
<6>[
1.539066] Oobsize : 64 Bytes
<6>[
1.539080] CFG0 Init : 0xa85408c0
<6>[
1.539091] CFG1 Init : 0x0004745e
<6>[
1.539105] ECCBUFCFG : 0x00000203
<5>[
1.539128] Creating 10 MTD partitions on "msm_nand":
<5>[
1.539153] 0x000002600000-0x000002a40000 : "boot"
<5>[
1.540536] 0x000002a40000-0x00000e840000 : "system"
<5>[
1.541503] 0x00000e840000-0x00000ed40000 : "recovery"
<5>[
1.542973] 0x00000ed40000-0x00000f000000 : "lgdrm"
<5>[
1.543911] 0x00000f000000-0x00000f100000 : "splash"
<5>[
1.544835] 0x00000f100000-0x00000f280000 : "FOTABIN"
<5>[
1.545796] 0x00000f280000-0x00000f840000 : "FOTA"
<5>[
1.546743] 0x00000f840000-0x00000f880000 : "misc"
<5>[
1.547731] 0x00000f880000-0x000013880000 : "cache"
<5>[
1.548731] 0x000013880000-0x000020000000 : "userdata"
<6>[
1.550026] PPP generic driver version 2.4.2
<6>[
1.550513] PPP Deflate Compression module registered
<6>[
1.550531] PPP BSD Compression module registered
<6>[
1.551431] PPP MPPE Compression module registered
<6>[
1.551455] NET: Registered protocol family 24
<6>[
1.551525] PPPoL2TP kernel driver, V1.0
<6>[
1.551546] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256
) (6 bit encapsulation enabled).
<6>[
1.551568] CSLIP: code copyright 1989 Regents of the University of Califo
rnia.
<4>[
1.552723] brcm_static_buf_init: initialize wifi_alloc_data
<4>[
1.552771] Section [3] initial allocation success size[139264]!!!
<4>[
1.552796] Section [2] initial allocation success size[32768]!!!

<4>[
1.552815] Section [1] initial allocation success size[12288]!!!
<4>[
1.552836] Section [0] initial allocation success size[12288]!!!
<4>[
1.552931] rmnet_init
<6>[
1.555303] msm_hsusb_rpc_connect: rpc connect success vers = 10001
<6>[
1.555328] msm_otg_probe: rpc_connect(0)
<6>[
1.560528] msm_hsusb_phy_reset
<6>[
1.682878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>[
1.682908] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
<6>[
1.683041] msm_hsusb_rpc_connect: usb_ep already connected
<6>[
1.683655] enable_idgnd
<6>[
1.683668] host driver registered w/ tranceiver
<6>[
1.683915] Initializing USB Mass Storage driver...
<6>[
1.684155] usbcore: registered new interface driver usb-storage
<6>[
1.684181] USB Mass Storage support registered.
<6>[
1.684390] usbcore: registered new interface driver libusual
<6>[
1.684825] usbcore: registered new interface driver usbserial
<6>[
1.685011] USB Serial support registered for generic
<6>[
1.685211] usbcore: registered new interface driver usbserial_generic
<6>[
1.685230] usbserial: USB Serial Driver core
<6>[
1.685411] USB Serial support registered for FTDI USB Serial Device
<6>[
1.685610] usbcore: registered new interface driver ftdi_sio
<6>[
1.685628] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
<6>[
1.685813] USB Serial support registered for IR Dongle
<6>[
1.686016] usbcore: registered new interface driver ir-usb
<6>[
1.686033] ir_usb: v0.4:USB IR Dongle driver
<7>[
1.686108] msm_hsusb msm_hsusb: msm72k_probe
<6>[
1.686123] msm72k_probe
<6>[
1.686151] __msm_rpc_connect: server not found 3000001a:20001
<6>[
1.686621] enable_sess_valid
<6>[
1.686638] peripheral driver registered w/ tranceiver
<6>[
1.686655] msm_otg_set_peripheral: is_host()=0, replaced with 1
<4>[
1.687493] mice: could not register psaux device, error: -16
<6>[
1.687513] mice: PS/2 mouse device common for all mice
<4>[
1.687610] [YJ] atcmd_virtual_probe, start!!
<6>[
1.688016] msm_hsusb_host msm_hsusb_host.0: Qualcomm On-Chip EHCI Host Co
ntroller
<6>[
1.688428] input: atcmd_virtual_kbd as /devices/platform/atcmd_virtual_kb
d/input/input0
<6>[
1.688728] msm_hsusb_host msm_hsusb_host.0: new USB bus registered, assig
ned bus number 1
<7>[
1.689031] msm_hsusb_host msm_hsusb_host.0: park 0
<7>[
1.689063] msm_hsusb_host msm_hsusb_host.0: reset command 080002 (park)=0
ithresh=8 period=1024 Reset HALT
<7>[
1.689090] msm_hsusb_host msm_hsusb_host.0: supports USB remote wakeup
<6>[
1.689133] msm_hsusb_host msm_hsusb_host.0: irq 47, io base 0xa0800000
<7>[
1.689226] usb usb1: default language 0x0409
<7>[
1.689271] usb usb1: udev 1, busnum 1, minor = 0
<6>[
1.689290] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[
1.689311] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumb
er=1
<6>[
1.689333] usb usb1: Product: Qualcomm On-Chip EHCI Host Controller
<6>[
1.689351] usb usb1: Manufacturer: Linux 2.6.32.9 ehci_hcd
<6>[
1.689368] usb usb1: SerialNumber: msm_hsusb_host.0
<7>[
1.689698] usb usb1: uevent
<7>[
1.690126] usb usb1: usb_probe_device
<6>[
1.690151] usb usb1: configuration #1 chosen from 1 choice
<7>[
1.690203] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[
1.690320] usb 1-0:1.0: uevent
<7>[
1.690856] hub 1-0:1.0: usb_probe_interface
<7>[
1.690876] hub 1-0:1.0: usb_probe_interface - got id

<6>[
1.690895] hub 1-0:1.0: USB hub found
<6>[
1.690973] hub 1-0:1.0: 1 port detected
<7>[
1.690990] hub 1-0:1.0: standalone hub
<7>[
1.691003] hub 1-0:1.0: individual port power switching
<7>[
1.691020] hub 1-0:1.0: individual port over-current protection
<7>[
1.691038] hub 1-0:1.0: Single TT
<7>[
1.691055] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
<7>[
1.691073] hub 1-0:1.0: power on to power good time: 20ms
<7>[
1.691103] hub 1-0:1.0: local power source is good
<7>[
1.691123] hub 1-0:1.0: enabling power on all ports
<6>[
1.691475] input: touch_mcs6000 as /devices/virtual/input/input1
<6>[
1.692891] GPIO Matrix Keypad Driver: Start keypad matrix for thunder_key
pad in interrupt mode
<6>[
1.693401] input: thunder_keypad as /devices/virtual/input/input2
<6>[
1.694478] KR3DM accelerometer driver
<6>[
1.694661] KR3DH accelerometer driver
<7>[
1.695731] RTC Registering with rs30000048
<3>[
1.696813] msm_rpc_client_req: RPC call was not successful (3)
<7>[
1.696838] msmrtc_setup_cb: RPC client registration for PROC:12 failed
<7>[
1.696856] msmrtc_probe: Could not initialize RPC callback
<6>[
1.697625] using rtc device, msm_rtc, for alarms
<7>[
1.697648] msm_rtc: dev (254:0)
<6>[
1.697695] rs30000048 rs30000048.65536: rtc core: registered msm_rtc as r
tc0
<7>[
1.698043] msm_rtc_secure: dev (254:1)
<6>[
1.698063] rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secu
re as rtc1
<6>[
1.698266] i2c /dev entries driver
<6>[
1.700166] Registered led device: lcd-backlight
<3>[
1.700188] aat2870bl:aat28xx_probe: Registering led class dev successfull
y.
<3>[
1.700733] aat2870bl:aat28xx_probe: done
<6>[
1.701048] i2c-gpio i2c-gpio.2: using pins 89 (SDA) and 88 (SCL)
<4>[
1.701735] [Touch] ts_set_vreg() onoff:1
<6>[
1.712355] i2c-gpio i2c-gpio.3: using pins 91 (SDA) and 90 (SCL)
<4>[
1.713093] [Ecompass] ecom_power_set() : Power On
<6>[
1.715493] input: Acompass as /devices/virtual/input/input3
<6>[
1.716895] i2c-gpio i2c-gpio.4: using pins 108 (SDA) and 107 (SCL)
<4>[
1.717393] [Accelerometer] accel_power_on() : Power On
<6>[
1.724261] input: accelerometer as /devices/virtual/input/input4
<6>[
1.724815] KR3DH 5-0018: KR3DH kr3dh: Accelerometer chip found
<6>[
1.725113] i2c-gpio i2c-gpio.5: using pins 3 (SDA) and 2 (SCL)
<6>[
1.725355] Linux video capture interface: v2.00
<7>[
1.725538] msm_batt_init: enter
<6>[
1.725561] __msm_rpc_connect: server not found 3000001a:20002
<7>[
1.726205] msm_batt_get_charger_api_version: num_of_chg_api_versions = 3.
The chg api version = 0x00010003
<6>[
1.726251] __msm_rpc_connect: server not found 30000089:20001
<7>[
1.728100] msm_batt_register: got handle = 2
<7>[
1.728611] msm_batt_enable_filter: enable vbatt filter: OK
<6>[
1.740363] msm-battery msm-battery: msm_batt_probe : Using PIF ZIG (1)
<6>[
1.740803] msm_batt_init: Charger/Battery = 0x00010003/0x00010001 (RPC ve
rsion)
<6>[
1.741105] device-mapper: uevent: version 1.0.3
<6>[
1.741638] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: d
m-devel@redhat.com
<6>[
1.741725] Bluetooth: HCI UART driver ver 2.2
<6>[
1.741743] Bluetooth: HCI H4 protocol initialized
<6>[
1.741758] Bluetooth: HCI BCSP protocol initialized
<6>[
1.741775] Bluetooth: MSM Sleep Mode Driver Ver 1.1

<7>[
<7>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<4>[
<4>[
<3>[
<3>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<4>[
<4>[
<3>[
<6>[
<3>[
<6>[
<6>[
<4>[
<4>[
<4>[
<4>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[
<6>[

1.742328]
1.742428]
1.744211]
1.744235]
1.744250]
1.744265]
1.744281]
1.744298]
1.744313]
1.744331]
1.744353]
1.744605]
1.744623]
1.744685]
1.744721]
1.745525]
1.745545]
1.745558]
1.745573]
1.745590]
1.745608]
1.745621]
1.745640]
1.745660]
1.746486]
1.746516]
1.746538]
1.748405]
1.748436]
1.749235]
1.749518]
1.749796]
1.750068]
1.750311]
1.750986]
1.751006]
1.751463]
1.751790]
1.751806]
1.753211]
1.753231]
1.753351]
1.753366]
1.753476]
1.754028]
1.754256]
1.754635]
1.754781]
1.754870]
1.754883]
1.755235]
1.755953]
1.756886]
1.756905]
1.757860]
1.758778]
1.758946]
1.758993]
1.759035]
1.759048]

bluetooth_power_init
bt_power_probe
mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,141 dma 8
mmc0: 8 bit data mode disabled
mmc0: 4 bit data mode enabled
mmc0: polling status mode disabled
mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
mmc0: Slot eject status = 0
mmc0: Power save feature enable = 1
mmc0: DM non-cached buffer at ffc17000, dma_addr 0x2f045000
mmc0: DM cmd busaddr 0x2f045000, cmdptr busaddr 0x2f045300
mmc1 : slot set f_max [24576000]
mmc1 : slot set MMC_CAP_SD_HIGHSPEED
bcm432x_sdcc_wlan_slot_status: 93 0
bcm432x_sdcc_wlan_slot_status: 93 0
mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,157 dma 8
mmc1: 8 bit data mode disabled
mmc1: 4 bit data mode enabled
mmc1: polling status mode disabled
mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
mmc1: Slot eject status = 1
mmc1: Power save feature enable = 1
mmc1: DM non-cached buffer at ffc18000, dma_addr 0x2f078000
mmc1: DM cmd busaddr 0x2f078000, cmdptr busaddr 0x2f078300
Registered led device: button-backlight
__msm_rpc_connect: server not found 30000061:30001
__msm_rpc_connect: server not found 30000061:20001
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
Advanced Linux Sound Architecture Driver Version 1.0.21.
No device for DAI CODEC_DAI
No device for DAI CPU_DAI
msm_soc: create pcms
asoc: CODEC_DAI <-> CPU_DAI mapping ok
msm_soc: ALSA MSM Mixer Setting
ALSA device list:
#0: msm-audio (MSM-CARD)
u32 classifier
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (6694 buckets, 26776 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ip6tnl0: Disabled Privacy Extensions
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized

<6>[
1.759073] Bluetooth: SCO (Voice Link) ver 0.6
<6>[
1.759088] Bluetooth: SCO socket layer initialized
<6>[
1.759260] Bluetooth: RFCOMM TTY layer initialized
<6>[
1.759285] Bluetooth: RFCOMM socket layer initialized
<6>[
1.759301] Bluetooth: RFCOMM ver 1.11
<6>[
1.759318] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[
1.759335] Bluetooth: BNEP filters: protocol multicast
<6>[
1.759351] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[
1.760165] clock_late_init() disabled 16 unused clocks
<6>[
1.761293] input: 7k_handset as /devices/virtual/input/input5
<6>[
1.761731] __msm_rpc_connect: server not found 30000091:30001
<3>[
1.763285] msm_rpc_client_req: RPC call was not successful (4)
<3>[
1.763310] hs_rpc_cb_init: RPC client request failed for pwr key delay cm
d, using normal mode
<6>[
1.764241] VFP support v0.3: implementor 41 architecture 1 part 20 varian
t b rev 5
<6>[
1.767420] input: proximity as /devices/virtual/input/input6
<4>[
1.767740] [Proximity] prox_power_set() : Power On
<4>[
1.769755] [Proximity] prox_power_set() : Power Off
<7>[
1.770800] msmrtc_tod_proc_result: 05/31/2011 13:49:02 (01)
<6>[
1.770851] rs30000048 rs30000048.65536: setting system clock to 2011-05-3
1 13:49:02 UTC (1306849742)
<6>[
1.770878] msm_v4l2: msm_v4l2_init
<6>[
1.773400] Freeing init memory: 144K
<4>[
1.773456] Warning: unable to open an initial console.
<7>[
1.783408] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>[
1.793063] usb usb1: uevent
<7>[
1.798570] usb 1-0:1.0: uevent
<3>[
2.042346] init: /init.thunderg.rc: 153: ignored duplicate definition of
service 'qmuxd'
<6>[
2.043278] yaffs: dev is 32505857 name is "mtdblock1" rw
<6>[
2.043296] yaffs: passed flags ""
<4>[
2.043315] yaffs: Attempting MTD mount on 31.1, "mtdblock1"
<4>[
2.110865] mmc0: host does not support reading read-only switch. assuming
write-enable.
<6>[
2.110903] mmc0: new high speed SDHC card at address b368
<6>[
2.111590] mmcblk0: mmc0:b368 USD 7.46 GiB
<6>[
2.111871] mmcblk0: p1
<3>[
2.116026] bcm432x_sdcc_wlan_slot_status: 93 0
<4>[
2.249128] yaffs: restored from checkpoint
<4>[
2.249486] yaffs_read_super: isCheckpointed 1
<6>[
2.272095] yaffs: dev is 32505865 name is "mtdblock9" rw
<6>[
2.272116] yaffs: passed flags ""
<4>[
2.272135] yaffs: Attempting MTD mount on 31.9, "mtdblock9"
<4>[
2.468671] yaffs: restored from checkpoint
<4>[
2.472053] mddi_hitachi_vsync_set_handler : handler = c01e68a8
<4>[
2.475498] yaffs_read_super: isCheckpointed 0
<6>[
2.475796] yaffs: dev is 32505859 name is "mtdblock3" rw
<6>[
2.475813] yaffs: passed flags ""
<4>[
2.475830] yaffs: Attempting MTD mount on 31.3, "mtdblock3"
<4>[
2.489746] yaffs_read_super: isCheckpointed 0
<6>[
2.489905] keychord: using input dev atcmd_virtual_kbd for fevent
<6>[
2.489931] keychord: using input dev thunder_keypad for fevent
<6>[
2.489955] keychord: using input dev 7k_handset for fevent
<3>[
2.490215] init: [get_was_hidden_reset] set ro.hiddenreset 0 --->
<6>[
2.505935] yaffs: dev is 32505864 name is "mtdblock8" rw
<6>[
2.505958] yaffs: passed flags ""
<4>[
2.505975] yaffs: Attempting MTD mount on 31.8, "mtdblock8"
<4>[
2.508640] yaffs: restored from checkpoint
<4>[
2.508696] yaffs_read_super: isCheckpointed 1

<4>[
2.566681]
<3>[
2.624798]
<3>[
2.682429]
'flash_recovery'
<3>[
2.692604]
<6>[
2.733284]
e)
<6>[
2.842879]
<6>[
2.852821]
<6>[
2.852924]
<6>[
2.856543]
<6>[
2.856614]
<6>[
2.856796]
<6>[
2.856899]
<6>[
2.862003]
<6>[
2.882004]
<6>[
2.901984]
<6>[
2.921999]
<6>[
2.922359]
<7>[
4.042009]
<7>[
4.042063]
<7>[
4.042079]
<6>[
4.043013]
<6>[
4.043033]
<6>[
4.043056]
<6>[
4.815271]
<6>[
4.816266]
<6>[
4.820161]
<6>[
4.820879]
<6>[
4.821566]
<6>[
4.822246]
<6>[
4.822966]
<6>[
4.823839]
<6>[
4.824506]
<6>[
4.825174]
<6>[
4.825843]
<6>[
4.846471]
<6>[
4.853711]
<6>[
4.854551]
<4>[
7.164768]
<4>[
7.164808]
<4>[
7.167941]
<6>[ 11.972513]
<6>[ 11.972673]
<3>[ 11.977093]
<6>[ 11.977478]
<3>[ 11.980231]
<4>[ 13.169911]
<6>[ 24.307876]
<6>[ 24.322473]
<4>[ 24.545048]
<4>[ 24.545058]
<4>[ 24.545934]
<4>[ 24.545941]
<6>[ 24.677479]
<6>[ 24.775676]
<6>[ 24.833651]
<6>[ 24.836921]
<6>[ 24.837044]
<6>[ 24.840508]

ftm_power: FTM-MODE(1)
init: service 'console' requires console
init: cannot find '/system/etc/install-recovery.sh', disabling
init: cannot find '/system/bin/cnd', disabling 'cnd'
warning: `adbd' uses 32-bit capabilities (legacy support in us
touch download start : irq disabled by ioctl
SMD: ch 39 0 -> 1
SMD: ch 39 1 -> 2
SMD: ch 40 0 -> 1
SMD: ch 40 1 -> 2
SMD: ch 41 0 -> 1
SMD: ch 41 1 -> 2
MCS6000 F/W Version [0x12]
MCS6000 H/W Revision [0x30]
MCS6000 F/W Version [0x12]
MCS6000 H/W Revision [0x30]
touch download done : irq enabled by ioctl
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
msm_hsusb_host msm_hsusb_host.0: suspend root hub
msm_otg_suspend: USB_CHG_TYPE = USB_CHG_TYPE__SDP
msm_otg_suspend: is_host()=0, replaced with 1
msm_otg_suspend: usb in low power mode
[snd.c:snd_ioctl] snd_avc_ctl 0
[snd.c:snd_ioctl] snd_agc_ctl 1
[snd.c:snd_ioctl] snd_set_volume 6 0 5
[snd.c:snd_ioctl] snd_set_volume 0 0 5
[snd.c:snd_ioctl] snd_set_volume 13 0 5
[snd.c:snd_ioctl] snd_set_volume 2 0 5
[snd.c:snd_ioctl] snd_set_volume 7 0 5
[snd.c:snd_ioctl] snd_set_volume 8 0 5
[snd.c:snd_ioctl] snd_set_volume 15 0 5
[snd.c:snd_ioctl] snd_set_volume 17 0 5
[snd.c:snd_ioctl] snd_set_volume 16 0 5
[snd.c:snd_ioctl] snd_set_device 0 1 1
[snd.c:snd_ioctl] snd_set_volume 30 0 5
snd_set_fm_radio_volume 1
save exit: isCheckpointed 1
save exit: isCheckpointed 0
save exit: isCheckpointed 1
msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off
msm_kgsl kgsl-3d0: firmware: requesting yamato_pm4.fw
init: untracked pid 1407 exited
msm_kgsl kgsl-3d0: firmware: requesting yamato_pfp.fw
init: untracked pid 1410 exited
save exit: isCheckpointed 1
[snd.c:snd_ioctl] snd_set_volume 30 0 5
snd_set_fm_radio_volume 5
state_show:0
name_show:alohag_atcmd
snd_set_fm_radio_volume 12
set_amp_mode 1
snd_ioctl:amp mode ->0
[audmgr.c:audmgr_enable] session 0xc06a23a8
[audmgr.c:audmgr_rpc_thread] start
[audmgr.c:process_audmgr_callback] rpc READY handle=0x00000000

<6>[ 24.840558] [audmgr.c:audmgr_rpc_thread] rpc_reply status 0


<6>[ 24.850746] request_suspend_state: wakeup (3->0) at 24848785084 (2011-05-3
1 13:49:25.579881689 UTC)
<6>[ 24.938323] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_
threshold
<6>[ 24.938458] CPUFREQ: Per core ondemand sysfs interface is deprecated - sam
pling_rate
<6>[ 25.063159] [audmgr.c:process_audmgr_callback] rpc CODEC_CONFIG volume=0x0
0000000
<6>[ 25.065231] [adsp.c:handle_adsp_rtos_mtoa_app] INIT_INFO Event
<6>[ 25.066036] [adsp.c:msm_adsp_get] opening module AUDPPTASK
<6>[ 25.066728] [adsp.c:msm_adsp_enable] enable 'AUDPPTASK'state[0] id[1722712
2]
<6>[ 25.068078] [adsp.c:handle_adsp_rtos_mtoa_app] module AUDPPTASK: READY
<6>[ 25.069628] [audpp.c:audpp_dsp_event] ENABLE
<4>[ 25.239843] save exit: isCheckpointed 1
<6>[ 29.874463] [audio_out.c:audio_dsp_event] PCMDMAMISSED 32
<6>[ 29.887314] snd_set_fm_radio_volume 5
<6>[ 30.004996] set_amp_mode 0
<6>[ 30.007009] snd_ioctl:amp mode ->0
<6>[ 30.033601] handle_ats_rpc_call:ONCRPC_LGE_GET_FLEX_ 7
<6>[ 30.033633] ONCRPC_LGE_GET_FLEX_MCC_PROC
<4>[ 30.033733] read data flex.xml fd: 0 iFlexSize : 500 res;232
<6>[ 30.033763] ONCRPC_LGE_GET_FLEX_MCC_PROC return string : 3 , 226
<6>[ 30.033779] lge_ats_handle_flex result : 8
<6>[ 30.033796] DSAT RPC accept_status = 8
<6>[ 30.033816] ret_string[0] =50, string=50
<6>[ 30.033831] ret_string[1] =50, string=50
<6>[ 30.033846] ret_string[2] =54, string=54
<6>[ 30.034563] handle_ats_rpc_call:ONCRPC_LGE_GET_FLEX_ 9
<6>[ 30.034583] ONCRPC_LGE_GET_FLEX_OPERATOR_CODE_PROC
<4>[ 30.034636] read data flex.xml fd: 0 iFlexSize : 500 res;232
<6>[ 30.034664] ONCRPC_LGE_GET_FLEX_OPERATOR_CODE_PROC return string : 3 , VDF
<6>[ 30.034681] lge_ats_handle_flex result : 8
<6>[ 30.034696] DSAT RPC accept_status = 8
<6>[ 30.034716] ret_string[0] =86, string=86
<6>[ 30.034731] ret_string[1] =68, string=68
<6>[ 30.034746] ret_string[2] =70, string=70
<6>[ 30.449226] handle_ats_rpc_call:ONCRPC_LGE_GET_FLEX_ 7
<6>[ 30.449273] ONCRPC_LGE_GET_FLEX_MCC_PROC
<4>[ 30.449471] read data flex.xml fd: 0 iFlexSize : 500 res;232
<6>[ 30.449506] ONCRPC_LGE_GET_FLEX_MCC_PROC return string : 3 , 226
<6>[ 30.449523] lge_ats_handle_flex result : 8
<6>[ 30.449544] DSAT RPC accept_status = 8
<6>[ 30.449568] ret_string[0] =50, string=50
<6>[ 30.449584] ret_string[1] =50, string=50
<6>[ 30.449603] ret_string[2] =54, string=54
<6>[ 30.452584] handle_ats_rpc_call:ONCRPC_LGE_GET_FLEX_ 9
<6>[ 30.452603] ONCRPC_LGE_GET_FLEX_OPERATOR_CODE_PROC
<4>[ 30.452681] read data flex.xml fd: 0 iFlexSize : 500 res;232
<6>[ 30.452708] ONCRPC_LGE_GET_FLEX_OPERATOR_CODE_PROC return string : 3 , VDF
<6>[ 30.452721] lge_ats_handle_flex result : 8
<6>[ 30.452734] DSAT RPC accept_status = 8
<6>[ 30.452753] ret_string[0] =86, string=86
<6>[ 30.452764] ret_string[1] =68, string=68
<6>[ 30.452776] ret_string[2] =70, string=70
<4>[ 31.275246] save exit: isCheckpointed 1
<6>[ 32.796466] [audpp.c:audpp_dsp_event] DISABLE
<6>[ 32.796516] [audpp.c:audpp_disable] Received CFG_MSG_DISABLE from ADSP
<6>[ 32.796538] [adsp.c:msm_adsp_disable] disable 'AUDPPTASK'

<6>[ 32.797643] [adsp.c:msm_adsp_put] closing module AUDPPTASK


<6>[ 32.797691] [audmgr.c:audmgr_disable] session 0xc06a23a8
<6>[ 32.799459] [audmgr.c:audmgr_rpc_thread] rpc_reply status 0
<6>[ 32.805483] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 32.805491]
tick = 1297509
<6>[ 32.805498]
stamp = 51950906505166861
<7>[ 32.806196] msmrtc_tod_proc_result: 05/31/2011 13:49:33 (01)
<6>[ 32.806249] rs30000048 rs30000048.65536: setting system clock to 2011-05-3
1 13:49:33 UTC (1306849773)
<3>[ 32.809593] [audmgr.c:process_audmgr_callback] DISABLED
<4>[ 37.302043] save exit: isCheckpointed 1
<4>[ 43.256848] save exit: isCheckpointed 1
<6>[ 43.762668] rmnet_open()
<6>[ 43.762714] SMD: ch 11 0 -> 1
<6>[ 43.763521] SMD: ch 11 1 -> 2
<4>[ 49.303318] save exit: isCheckpointed 1
<7>[ 54.412001] rmnet0: no IPv6 routers present
<4>[ 55.241881] save exit: isCheckpointed 1
<4>[ 61.223553] save exit: isCheckpointed 1
<4>[ 67.522538] save exit: isCheckpointed 1
<4>[ 73.294086] save exit: isCheckpointed 1
<4>[ 79.032528] gpiomatrix: key 8b, 1-1 (33-38) changed to 1
<4>[ 79.193839] gpiomatrix: key 8b, 1-1 (33-38) changed to 0
<4>[ 79.208646] save exit: isCheckpointed 1
<4>[ 85.771169] save exit: isCheckpointed 1
<4>[ 91.687369] save exit: isCheckpointed 1
<4>[ 97.979644] save exit: isCheckpointed 1
<4>[ 103.863766] save exit: isCheckpointed 1
<4>[ 109.295138] save exit: isCheckpointed 1
<4>[ 115.182914] save exit: isCheckpointed 1
<4>[ 121.193521] save exit: isCheckpointed 1
<4>[ 127.190081] save exit: isCheckpointed 1

Das könnte Ihnen auch gefallen