Beruflich Dokumente
Kultur Dokumente
OBJECTIVE
The purpose of this experiment is:
(a) To understand the effect of moment of inertia rotational motion of rigid bodies.
3. THEORY
Given that a body rotates about an axis AA' (Fig 1a), and that its mass is made up of small
elements of mass ∆m 1 , ∆m 2 , ∆m 3 …∆m n ; its moment of inertia is given by r 2 m, and
the resistance offered by the body is measured by the sum r 1 2 ∆ m 1 + r 2 2 ∆ m 2 + r 3 2 ∆ m 3
+ ... r n 2 ∆ m n . By taking the number of elements over a domain Ω of a body, the moment
of inertia can be expressed as :
I = ∫ r 2 dm (1)
Ω
We then consider the radius of gyration r of the body to be defined as the distance at which
the entire mass of the body should be concentrated at if its moments of inertia with respect
to the axis of rotation AA' is to remain unchanged. We can then express moment of inertia
I as:
I = k2m (k is a constant) (2)
Figure 1a Figure 1b
-1-
The moment of inertia of a body with respect to any axis ZZ' (Fig.1b) can be expressed as
the sum of its inertia about an axis GG' parallel to ZZ' through its centre of gravity (CG),
and the square of the perpendicular distance d between the axes :
I Z = I G + md 2 (3)
where IZ is the moment of inertia of the body about axis ZZ' and I G is the moments of
inertia about the axis GG' passing through the centre of gravity.
This theorem is useful in calculating the moment of inertia of a complex shape which has
been divided into a collection of simple ones.
The total moment of inertia of the system in rotation as shown can be expressed as a
function of r , which is the distance of each mass M from the axis of rotation. Treating
the masses attached on the horizontal bar as point masses, the moment of inertia I for the
system can be expressed as :
I = 2 M r2 + Ih + Iv + Ip (4)
I = 2 M r2 + Ic (5)
τ = Iα (6)
-2-
where α is the angular acceleration of the system and τ is the net torque on the system.
The torque is applied using the mass m attached to the string wrapping around the spindle
and dropping through a distance y:
τ = r s mg (7)
and α = a / rs (8)
Since the mass is released from rest and falls through a distance of y, its acceleration can
be calculated using :
a = v 2 / (2y) (9)
α = v 2 / (2yr s ) (10)
Substituting equations (7) and (10) into (6), the moment of inertia I takes the form:
I = (2r s 2 y m g) / (v 2 ) (11)
v = d/t (12)
The experimental value of the moment of inertia can be determined by substituting
equations (7) and (10) into (12). It is hence expressed as :
The platform of the apparatus was displaced through a small angle θ and set in oscillation. Taking
the moments about the z axis :
where φ is the angular displacement of the wires, α is the angular acceleration of the platform, Ip
and I are the moments of inertia of the platform and the object respectively.
-3-
For small angle displacements, say β , sin β ≈ β , ∴ φ = (rθ) / L (15)
α + (mp + m)gr2 θ = 0
(Ip +I)L
I p = T p 2 (m p gr 2 ) / 4π2 L (17)
According to Parallel Axis Theorem, by assuming that the centre of mass is at the
_
geometrical centre of the thin discs, we can give the disc the same treatment as the
_
‘point’masses and use the same experimental methods to find the Iexp values for thin disc;
i.e_
mass of the added objects can be determined regardless of their geometrical properties.
This _
warrants us to treat test samples in the spindle experiment as ‘point’ masses and to simply
_
ignore the effects their dimensions have on the effective moment of inertia of the spindle
_
assembly. (However, by general theory, any object that has its mass spread over a domain
_
large enough to be of significant influence on the moment of inertia about its rotating axis,
is _
-4-
not considered as a point mass. By this consideration, we cannot say that the thin discs
_
display ‘point’ mass properties.)
_
Subsequently, we can determine the mass of disc by plotting the graph of Iexp vs r2. The
_
gradient of the graph represents the total mass of the 2 thin disc. The mass of each thin
_
disc is therefore half of the gradient of the graph.
-5-