Sie sind auf Seite 1von 8

Kulliyyah Architecture and Environmental Design Programme Course Title Course Code Status Level Credit Hours Contact

Hours Pre-requisites (if any) Co-requisites (if any) Teaching Methodology

Department Building Technology and Engineering

Master of Science in Building Services Engineering Electrical System in Buildings ABE 6110 Core Masters of Science in Building Services Engineering. Three (3) Three (3) Nil Nil 1. Weekly Lectures 2. Group Discussions 3. Case Study /Mini Project 4. Software Usage Energy 10 Version 1.6 5. Technical Site Visit LEO Building, KTAK, Putrajaya. Tutorial, Term Papers and Assignments - 30% Mini Project / Case Study (site visit) Final Examination - 30% - 40%

Methods of Evaluation

Instructor (s) Semester Offered Course Objectives

TOTAL - 100 % Assoc Prof Ir Zulkefli bin Yaacob MIEM, MIEE, P.Eng

1. To provide knowledge on various types of electrical


installations and services pertaining to M&E systems. 2. To expose students to the required rules and regulations in building services in compliances with Uniform Building byLaws 1984( Act 133), Street, Drainage & Building Act 1974 and Code of Practice on Energy Efficiency and Use of Renewable Energy for Non-residential Buildings (MS 1525: 2001) . 3. To provide knowledge on electrical designs and installations in compliance with national and international electrical code of practices, standards and specifications. To expose students to the modern concept of smart / intelligent and energy-efficient building designs, systems, and services. In the beginning of the course the students will be introduced to the basic concept and theory of electricity, power system and equipment. Then the students will be exposed to the various electrical equipment that are used in the building systems and services i.e. telecommunication system, data distribution system, security system, fire alarm system, lightening protection system etc. The students will also be

Course Synopsis

exposed to the internal electrical installation design and installation in compliance with national and international electrical code of practices and standards. For the maintenance proposes the student will be taught on the electrical failures, fault finding and analysis, trouble shooting and restoration of supply. The students are also exposed to the modern concept of smart and intelligent building through existing model smart buildings locally and internationally. The emphasis of this programme is an integrated approach, toward achieving smart / intelligent building concept by taking into consideration the energy efficiency and saving, Building Automation System (BAS), Energy Management System (EMS), Agronomics, Environmental Management System (EMS) Learning Outcomes At the end of the course, students will be able to integrate various building services related to electrical installations, concepts and requirements in compliance to the rules and regulations, code of practices and related national, international standards and relevant technical specifications. Able to integrate smart/ intelligent building concept by incorporating the aspect of building automation system, energy efficient equipment, energy saving and energy management system.

Course Outlines Weeks Topics 1. Introduction to Electricity 1.1 Direct current (DC) and alternating current (AC) 1.2 Electricity generation 1.3 Advantages of AC over DC and problems 1.4 AC to DC conversion 1.5 Single phase versus three phase advantages and disadvantages 1.6 Power and power factor in AC system. 1.7 Voltage and voltage drop Electrical power loses 1.8 Power Quality Aspects Requirements, Standard & Analysis. 1.9 Electrical symbols, drawings and plans Referred Textbook / Chapters / Reference Materials Mechanical And Electrical System In Buildings W K Y Tao And R R Janis Prentice Hall 2001

1-2

3-4

2. Power System and Equipment 2.1 Power distribution system 2.2 Single phase and three phase transformers 2.3 Voltage spread and profile 2.4 Electrical Grounding and Bonding 2.5 Short circuit and interrupting capacity 2.6 Emergency power systems

Building Control System Vaughn Bradshaw John Wiley & Sons Electrical Installation Calculation Jenkins Brian Oxford Blackwell Science 1998

2.7 Power equipment, power


Losses and Efficiency 2.8 Electrical Conductors and Insulation

2.9 Wiring Methods


2.10 Installation of Cable in raceways 2.11 Wiring Devices and Components 2.12 Electrical Installations Protective devices ACB, MCCB, ELCB etc. 5-7 3.1 Communication, Life Safety And Security Systems Mechanical and Electrical System in Buildings W K Y Tao and R R Janis Prentice Hall 2001 Mechanical and Electrical Equipment for Buildings B Stein and J S Reynolds John Wiley& Sons 2000 Handbook of Electrical Design Details N Sclater & John E Traister Mc Graw Hill 2003 Regulation For Electrical Installations IEE Publication

3.1.1

Forms and functions of information systems 3.1.2 Common characteristic of auxiliary or information system 3.13 Classification of auxiliary systems 3.2 Components And Wiring 3.2.1 Wiring for auxiliary systems 3.2.2 Basic wirings for low voltage high frequency systems 3.2.3 Fiber optics cabling

3.2.4

Selection of appropriate wiring systems

3.3 Telecommunication System 3.3.1 The electromagnetic spectrum 3.3.2 Standard radio and video frequencies 3.3.3 Audio and video systems 3.4 Data Distribution Systems 3.4.1 Types of distribution systems 3.4.2 Design considerations 3.5. Security Systems 3.5.1 Types of system fixed line system, telephone exchange, mobile telephone system radio relay station 3.5.2 Closed circuit television (CCTV) 3.6 Telephone Systems 3.6.1 Types of systems 3.6.2 Design considerations

3.7 Fire Alarm System 3.7.1 Design Code and requirements 3.7.2 Types of systems 3.7.3 Design considerations 3.8 Lightening Protection System 3.8.1 Lightning formation 3.8.2 Concept of lightening protection 3.8.3 Air terminal 3.8.4 Lightning conduction and grounding electrodes.

4. Site Visit / Case Study 5. Internal Electrical Installation Design for Building 5.1 Electrical design procedures 5.2 Analysis off building needs

LEO Building, KTAK, Putrajaya. Mechanical And Electrical System In Buildings W K Y Tao And R R Janis Prentice Hall 2001 Mechanical And Electrical Equipment For Buildings B Stein And J S Reynolds John Wiley& Sons 2000 Handbook Of Electrical Design Details N Sclater & John E Traister Mc Graw Hill 2003 Regulation For Electrical Installations IEE Publication

9-10

5.3 Determination of electrical


loads power & lightening 5.3 System selection and typical equipment ratings 5.4 Condition with other design decisions and requoirements 5.5 Drawing up of electrical plans and specifications

5.6 National & International


electrical code of practices and standards, IEE Rules and Regulations 5.7 Branch circuits 5.8 Tables and schedules 5.9 Power wiring design and problems 5.10Wiring for low voltage (LV) systems 11-12 6. Electrical Failures, Fault Finding, Analysis, Trouble shooting and Restoration 6.1 Electrical fires 6.2 Transformer failures 6.3 Failures of electrical connectors and terminals 6.4 Overheating /burning of cramped sockets 6.5 Failures of plug/ socket connectors 6.6 Failures of wire strands 6.7 Failures of insulator on connector cables 6.8 Failures of terminal boards 6.9 Investigation of failures and fires Electrical Fires And Failures Prevention And Trouble Shooting Guide AA Hattangadi McGraw Hill 1999

13 -14

7. Modern Concept on Smart/Intelligent Building Impact of IT 7.1 Changing Pattern of Work 7.2 Type of Space Layout 7.3 Cost Estimation & Life Cycle Costing 7.4 Engineering Economic of Electrical Design 7.5 Building Automation System (BAS)

Abraham Warszawski (1999) Industrialized And Automated Building System, E & Fn Spon, London And New York, Chapter 1, 2, 4, 6 Atkin, B., (1988), Intelligent Buildings: Application Of It And Building Automation To High Technology Construction Projects. Inicom Applied Information Technology Reports. Intelligent Building In South East Asia. Harrisson, E.Loe, J Read E & Fn Spon Building Automation Systems Editor, E. A. Reeves. Bsp Professional Books, 1988.

7.6 Performance Requirement


on Energy Efficiency 7.7 Integration of systems

7.8 Testing, Commissioning


and Maintenance 7.9 Software usage Energy 10

References

Required Reading Richard R.Janis & William K.Y.Tao, Mechanical and Electrical System in Buildings. Pearson Prentice Hall, 2005. B Stein and J S Reynolds. Mechanical and Electrical Equipment for Buildings. John Wiley& Sons (2000). (9th Edition) Peter Burberry. Environmental and Services. Mitchells Building Series Addison Wesley Longman Limited, 1997 (8 th Edition) David V. Chadderton, Building Services Engineering. Spon Press, London & New York, 2004. (4 th Edition). Albert Ting-pat so & Wai Lok Chan, Intelligent Building Systems. Kluwer Academic Publishers USA, 1999. Derek Clement -Croome Intelligent Buildings: Design, Management and Operation, Thomas Telford Limited, 2004. Andrew Harrison, Eric Loe & James Read, Intelligent Building in South East Asia E & FN Spon, New York, 1998. Requirements for Electrical Installations IEE Wiring regulations 16th Edition (BS 7671:1992), BSI and Institution of Electrical Engineers 1992.

MS IEC 364; 1996 Malaysian Standards on Electrical Installations of Buildings, SIRIM Berhad, 1996. Recommended Reading Atkin, B., (1988). Intelligent Buildings: Application Of It And Building Automation To High Technology Construction Projects. Inicom Applied Information Technology Reports. Abraham Warszawski (1999), Industrialized And Automated Building System, E & Fn Spon. London And New York. E. A. Reeves (1988). Building Automation Systems. BSP Professional Books. N Sclater & John E Traister (2003). Handbook Of Electrical Design Detail.Mc Graw Hill.

Proposed Start Date Batch of Students to be Affected

Semester I 2007/2008

New Students

Das könnte Ihnen auch gefallen