Beruflich Dokumente
Kultur Dokumente
VelaTM
P. 324 Vela mechanisms without cover plates Switches and sockets P. 336 In One by Legrand home automation system
P. 346 Mosaic White and Evolution Screw terminals and control units
NEW
P. 352 Mosaic surge protection and ancillary mechanisms P. 363 Mosaic South Africa, US and Euro US standards sockets outlets P. 368 Mosaic French standards sockets outlets, frames and cover
MosaicTM
P. 365 Mosaic German standard mechanisms, plates and frames P. 372 Mosaic lighting automation system P. 366 Mosaic international standard sockets outlets
P. 360 Mosaic BS White, Metal and Evolution Frames and cover plates P. 367 Mosaic Italian standard Metal and Evolution Cover plates
NEW
5
Innovative lighting unit
for customer assembly, 1.42 m (p. 380)
Mosaic BS Evolution
Soft sun cover plate (p. 360)
318
319
TWO KINDRED SPIRITS FOR COMFORT AND FREEDOM, AND ONE MECHANISM FOR MULTIPLE COMBINATIONS
320
Vela
TM
SIMPLE INSTALLATION:
The mechanisms can be installed in complete safety while the final choice of plates and cover plates is being made
[1]
EXCLUSIVE TECHNIQUE:
Ultra simple to install, the 1-module mechanism covered by a 2 or 3-module switch rocker plate
[2]
INNOVATIVE FUNCTIONS:
The modularity of the range allows you to enhance your offer with innovative functions to attract your customers and save you time
[3]
[4]
ADDED VALUE:
Your customers can now integrate Vela with concepts to adorn the walls, improve comfort and create an even more secure environment
321
Vela
TM
V E L A Q UA D R A
Plastic plates
V E L A Q UA D R A
Shaded plates
V E L A Q UA D R A
Shiny plates
Mineral Oil
Cream
Garnet Red
Anthracite
Incense
Blue
Red Japan
Smoky Grey
Cream
Ivory
Smoky Musk
Terracotta
White
Seppia
Mustard
322
V E L A TO N DA
Plastic plates
V E L A TO N DA
Striped metal
V E L A TO N DA
Metal plates
Stone
Aluminium
Steel
Ice
Gold
Gold
Malt
Blue
Aluminium
Green
Anthracite
Copper
Chromium
Bordeaux
Clay
Yellow
Bronze
White
323
VelaTM
mechanisms only without cover plates
NEW VelaTM
cover plates for mechanisms
6827 30
6827 31
6831 40
6827 61
6827 62
Pack
Cat.Nos
Switches 16 A - 250 V
Pack
Cat.Nos
10 10 10
1 module Single pole 6827 29 One-way switch 6827 30 Two-way switch 6827 43 Intermediate
100 100 5 5 5
1 module For switches and push-buttons 6829 13 Anthracite 6832 13 White 2 modules
Push-button 10 A - 250 V
1 module
10
10 10
Lamps
10 10 10 10
For push-buttons 12 V - 0.4 W 24 V - 0.8 W 230 V - 1.7 mA Bright orange neon 230 V - 0.55 mA Low consumption green neon
5 5
Other standards 2P +
5 5
Ancillary mechanisms
50 50
1 module Blanking plates 6827 69 Anthracite 6828 69 White Cord outlets With 9 mm entry 6827 70 Anthracite 6828 70 White
10 10
324
VelaTM
control units with switch rocker plates
NEW
6828 34
6827 45
6828 48
6827 21
6827 27
Pack
Cat.Nos
Switches 16 A - 250 V
Pack
Cat.Nos
Dimmers 230 V
10 10
Rotary dimmer switches 60 - 500 W For incandescent and halogen lamps With integrated fuse With two-way switch incorporated
1 module
Push-buttons 10 A - 250 V
One way push-buttons 1 P - (N/O) 6827 34 Anthracite 6828 34 White
1 module
1 1
1 1
1 1
Double push-buttons Interlocked 1 P (N/O) + 1 P (N/O) 1 module With pictogramme, with interlock 6827 45 Anthracite 6828 45 White Without pictogramme without interlock 6827 54 Anthracite 6828 54 White Retractive pull cord switches 1 module 1 P - Pull to make 6827 46 Anthracite 6828 46 White Push-button with label holder 6831 54 1 P - Push to make (N/O)
2 modules
1 1
6827 21 Anthracite 6828 21 White Rotary dimmer switches 100 - 500 W For incandescent and halogen lamps 6827 22 Anthracite 6828 22 White Push-button dimmer switches 60 - 500 VA With integrated fuse 2 modules For incandescent, halogen lamps, and ferromagnetic transformer 6827 23 Anthracite 6828 23 White
1 1
1 1
1 1
With passive infrared movement sensor Twilight circuit with variable threshold and possibility of continuous "on". Programmable circuit for delayed switch-off adjustable from 30 seconds to 10 minutes
1 1
1 module For loads up to 2 A (resistive/inductive) 6827 27 Anthracite 6828 27 White
1 1
Illuminated push-buttons 1 P - Push to make (N/O) 1 module With red diffuser 6827 48 Anthracite 6828 48 White With transparent diffuser 6827 50 Anthracite 6828 50 White 1 P - Push to make (N/O) With green diffuser 6827 49 Anthracite 6828 49 White
1 1
1 1
Relay output 6 A resistive/2 A inductive Can also be activated by external push-buttons 2 modules With 0-A-1 (off-automatic-on) selector 6827 28 Anthracite 6828 28 White
1 1
Push-buttons 16 A - 250 V
Two way push-button 1-0-2
1 module
1 1
325
VelaTM
TV sockets
NEW VelaTM
telephone & data sockets
6827 81
6828 81
6827 59
6827 87
6828 87
6828 83
6828 55
TV sockets
Coaxial sockets
Telephone sockets
10 10
Single shielded For single user antenna systems, including remotely powered and centralised systems with current and signal transition for channel selection Shielded connector terminals with captive screws 1 module 9.5 mm - male connector 6827 81 Anthracite 6828 81 White Single shielded with capacitor For single user antenna or centralised systems Shielded connector terminals with captive screws for non remotely powered or centralised satellite systems 9.5 mm - male connector 6827 82 Anthracite 6828 82 White Throughwiring shielded For antenna systems, including remotely powered and centralised systems and centralised satellite systems with current and signal transition for channel selection Shielded connector terminals with captive screws 9.5 mm Male connector Throughwiring Anthracite White Terminal wiring With integrated 75 W impedance adapter Anthracite White
10 10
Data sockets
RJ 45 - Cat. 5e K10 connection
10 10
1 module UTP 6827 85 Anthracite 6828 85 White 1 module FTP - shielded 6827 86 Anthracite 6828 86 White
1 1
1 1
1 1
10 10 10 10
1 1
Cat. 5e Anthracite - UTP White - UTP Anthracite - FTP White - FTP Cat. 6 Anthracite - UTP White - UTP Anthracite - FTP White - FTP
TV-FM-SAT sockets
Single shielded coaxial socket for single user antenna TV systems, including remotely powered and centralised systems, single user and centralised satellite systems with current and signal transition for channel selection and radio systems Male TV connector terminal 9.5 mm Female SAT and radio connector 9.5 mm It is recommended to use the three sockets at the 2 modules same time 6827 83 Anthracite 6828 83 White
10 10 10 10
1 1
TV/SAT sockets
F-Coaxial connector with screw terminals 75 1 module Female SAT and radio connector 9.5 mm 6827 59 Anthracite 6828 59 White
Red catalogue numbers: New products
10 10
326
VelaTM
socket outlets
NEW VelaTM
visual indication
6828 74
6828 75
6829 17
6827 26
6827 77
6828 77
6827 98
6828 98
6827 94
6828 94
Pack
Cat.Nos
10 10 5
1 1
10 10
With automatic switch-on With rechargeable base - high output white LED Interchangeable Ni-MH batteries without "memory" effect - 2-hour autonomy 2 modules Low consumption in stand-by mode (0.4 W) 6829 17 Anthracite 6832 17 White
2 modules Guide lamp 230 V 6827 26 With adjustable beam direction
Indicator units
Single unit With interchangeable diffusers 1 module (green - red - transparent) 6827 98 Anthracite 6828 98 White Double unit Double diffusers (green - red - transparent) 6827 94 Anthracite 6828 94 White
Shaver sockets
With isolation transformer Input voltage 230 V - 50/60 Hz Output voltage 115/230 V - 20 VA 3 modules With integrated support 6827 76 Anthracite 6828 76 White
1 1
1 1
1 1
12 V - 5 W 24 V - 5 W 230 V - 5 W
327
VelaTM
sound distribution system
NEW VelaTM
audible indication
6827 07
6832 16
6829 00
6832 00
6831 65
6832 15
6827 25
6828 25
Pack
Cat.Nos
Pack
Cat.Nos
Buzzers
1 1
Tuner with radio alarm 5 presettable FM channels With RDS volume control 3 modules For use with or in place of input pre-amplifier 6827 07 Anthracite 6828 07 White Pre-amplifier With 3.5 mm jack 24 V power supply - input sensitivity from 2 modules 100 mV to 1 V 6827 04 Anthracite 6828 04 White
1 1
1 1
1 1
Bells
Electronic bell 12 V / 3 different sounds 2 modules Adjustable sound level on front panel 6827 25 Anthracite 6828 25 White
1 1
Monostable auxiliary With N/O contact 6 A resistive - 2 A inductive 230 V 24 V coil for remote on-off control of external 1 module sound source 6827 06 Anthracite 6828 06 White
1 1
1 1
Local amplifier With individual volume control Output music power 2 W to 22 2 modules 24 V power supply 6829 16 Anthracite 6832 16 White
1 1
Switching type power supply 6831 65 Input 230 V - SELV output 24 V - 1 A Self protected against overload and short-circuit To be installed on a 6-module din-rail
1 1
Loudspeaker device To be installed in a flush-mounting box or in wallmounting box Cat.No 859 92 (see opposite) Dimensions: 106 x 117 x 52 mm 3+3 modules Rated power 6 W - impedance 22 6829 15 Anthracite 6832 15 White Connector cable For linking sound source and pre-amplifier, fitted with stereo jack plugs - 6.5 and 3.5 mm 6831 66 Length 1.5 m
328
VelaTM
heating - air conditioning
NEW VelaTM
detectors
6827 10
6828 10
6827 00
6828 01
6827 11
6828 12
6827 02
6828 03
Pack.
Cat.Nos
Detectors
Gas detector With optical signal 85 dB acoustic alarm Internal self-diagnostics - suitable for controlling signal repeaters 12 V / Methane gas detector Anthracite White LPG gas detector Anthracite White
2 modules
1
6827 36 6828 36
1 1 1
Pack
Cat.Nos
1 1
Electronic ambient thermostat With integrated "summer/winter" switch Temperature adjustment range 5-30 C 2 LEDs for indicating operating status Relay output with NC/NO contacts 2 A - 250 V 2 modules 230 V 6827 10 Anthracite 6828 10 White
1 1
Signal repeater For gas detectors Optical/acoustic signal Relay output with 1 switching contact 2 modules 6 A resistive - 2 A inductive 6827 02 Anthracite 6828 02 White Safety transformer Input 230 V - 50/60 Hz Output 12 V 2 modules Power 4 VA 6827 03 Anthracite 6828 03 White
1 1
Electronic daily/weekly programmable thermostat 7 possible programmes LCD screen Powered by 2 x 1.5 V batteries (LR 67 AA type) Can be connected to external temperature probe and remote controlled Switching output contact 1 A 3 modules 230 V 6827 11 Anthracite 6828 11 White
1 1
3 modules
1 1
6827 12 6828 12
3 modules
1 1
6827 13 6828 13
Daily/weekly electronic programmable time switch Minimum programmable interval: 1 minute 4 daily cycles with independent or repeatable programming LCD screen Backup battery - 230 V power supply Output contact 8 A resistive - 2 A inductive 230 V Anthracite White Electronic clock with daily programme LCD screen - illuminated - Back up battery 230 V Anthracite White
Normally open gas solenoid valve Manual reset 12 V - 50 Hz power supply Absorbed power 3 VA Zero absorption at rest Max pressure 500 mbar Operating temperature - 15 to + 60 C 6831 67 IP 65 - 3/4" gas threaded with 1/2" reducer
Selector switches
Selector switch - 1 way - 4 position speed controller, for fans, fan-coils 6827 36 Anthracite 6828 36 White
2 modules Red catalogue numbers: New products
1 1
329
VelaTM
MCBs
NEW
VelaTM
support frames & flush-mounting boxes
6829 05
6832 05
728 43
728 44
6829 09
6832 09
313 01
892 39
Pack
Cat.Nos
MCBs
2 pole thermal-magnetic devices with one protected pole (C curve) Positive contact indication Breaking capacity: 1 500 A 6A - 230 V Anthracite White Breaking capacity: 3 000 A 10 A - 230 V Anthracite White 16 A - 230 V Anthracite White
Pack
Cat.Nos
10
1 module
For 2 modules Can also be used as claw-mounting For 3 modules For 4 modules For 6 modules
1 1
6829 04 6832 04
1 module
50 10 10
1 1 1 1
Flush-mounting boxes
Universal box
250
1 gang unit - 71 x 71 mm For screw-mounting wiring accessories 106 x 71 mm - 3 modules 130 x 71 mm - 4 modules 186 x 71 mm - 6 modules
RCBOs
Single pole and neutral 10 mA Residual current circuit breaker with overcurrent protection C curve Positive contact indication Breaking capacity: 3 000 A 10 A - 230 V Anthracite White 16 A - 230 V Anthracite White
15 5 75
2 modules
1 1 1 1
330
Flush-mounting boxes
Support frames
Cover plates
Modules
728 42 313 01
892 39
728 43
892 49
728 44
892 50
728 46
331
VelaTM
Tonda cover plates
NEW
6825 06
6825 07
6825 08
6825 10
6825 41
6825 42
6825 43
6825 44
6825 45
Pack Ice
Cat.Nos Malt
Pack
10 10 5 5
10 10 5 5
10 10 5 5
10 10 5 5
10 10 5 5
10 10 5 5
332
VelaTM
Tonda cover plates (continued)
NEW
6825 87
6825 86
6825 46
6825 51
6825 47
6825 48
6825 49
6825 50
6829 23
Pack
Cat.Nos
Pack
Cat.Nos Radica
Steel
Aluminium
10 10 5 5
10 10 5 5 1
10 10 5 5
10 10 5 5
10 10 5 5
333
VelaTM
Quadra cover plates
NEW
6826 15
6826 16
6826 17
6826 18
6826 25
6826 26
6826 27
6826 28
6826 29
Pack
Pack
Cat.Nos
10 10 5 5
Seppia
Incense
10 10 5 5
10 10 5 5
For 2 modules For 3 modules For 4 modules For 6 modules For 2 modules For 3 modules For 4 modules For 6 modules
10 10 5 5
For 2 modules For 3 modules For 4 modules For 6 modules For 2 modules For 3 modules For 4 modules For 6 modules
Ivory
10 10 5 5
Cream
10 10 5 5
334
VelaTM
Quadra cover plates (continued)
NEW
VELATM
Mechanisms
6826 21
Pack
Cat.Nos
Blue
Cream
5 5 5 5 5 5 5 5
Garnet Red
5 5 5 5
Mosaic Mechanisms
The VELA Quadra range can also be equipped with Mosaic mechanisms in place of Vela mechanisms
Red catalogue numbers : New products
335
]
HOME AUTOMATION
Products and systems
A la carte scenarios
With In One by Legrand , your customers can create numerous scenarios to suit their needs and preferences For example : Turning off all the lights at once when you leave for work. If you want, this single operation can also activate the alarm and/or reduce the heating to economy mode Switching between various different lighting environments for reading, watching the television, having a drink or a meal Using the internet, the television or the telephone in any room in the house Chasing off intruders and being kept informed by telephone or the internet Switching off the lights in the lounge, lowering the roller blinds and switching on the home cinema
Operating principle
A new switch: the scenario switch, is used to create scenarios that make life simpler. Combined with new In One by Legrand products that communicate with one another, it controls the electrical installation in the house, centralising all the controls or controls it remotely via a web server.
Scenario switch
Comfort
Controlling the lighting Controlling the blinds and awnings Controlling the heating Controlling the watering
!
Communication Safety
Monitoring the house Detection of leaks (water, gas) Television Internet / Computing / Telephone Audio / video door entry system
w
337
336
]
HOME AUTOMATION
Products and systems
[
Control
The scenario switch can be used for example to reduce the heating, close the blinds and activate the alarm locally in just one operation. The functions can be controlled separately or all together. Scenario switch
Control of 1 to 4 scenarios in one room or house/business location in just one operation, combining the lighting, blinds, electrical heating, etc. Available in 230 V mains-borne signalling version and radio version.
Your customer controls the blinds, heating, alarm, etc in his own country or abroad, from a mobile phone(1) or a computer connected to a phone line or via the internet.
(1) Mobile phone with internet or WAP connection
The system In One by Legrand has been designed to be easy to change as your customers needs, preferences and budgets change. The living scenarios can be changed at any time. For example, continue to turn off the lights and change the air conditioned in a single operation, and add on the option to leave the blinds open or simultaneously close them. You can also add to your customers installations by fitting additional scenario switches and fitting new rooms with In One by Legrand switches.
DSL line Cable or numeric line Control using the internet Other scenario controls for use with the Sagane scenario switch: Mobile scenario switch
Controls up to 6 scenarios combining lighting and blinds in one room, in just one operation. 2 versions: infrared or radio.
Communication cabinet fitted with a web server Pocket radio scenario switch
Controls up to 4 scenarios combining lighting, blinds and awnings, etc., in just one operation. For equipment in one room, house or business location.
Scenario keypad
Controls the intruder alarm and living scenarios in one house/business location. Can have 8 different secret codes. Operates by radio and is easy to install on walls.
338
339
MosaicTM
British standard (60.3 and 120.6 mm fixing centres) flush boxes, surface boxes, support frames and cover plates FLUSH BOXES (p. 275)
MODULES
White
Pearl grey
Stardust grey
Solf sun
Bronze
Glossy silver
Matt silver
Glossy gold
Matt gold
1 module 2 modules 2 x 1 module For 5 A and 13 A switched socket outlet Cat.Nos 741 25/41/42/45/46 For 15 A switched socket outlet Cat.Nos 741 22/23
depth 16 mm: 891 09 depth 25 mm: 891 10 depth 35 mm: 891 13 depth 48 mm: 891 17
6757 26
6757 76
6758 26
6758 76
754 76
755 76
754 26
755 26
6757 27
6757 77
6758 27
6758 77
754 77
755 77
754 27
755 27
Not needed
750 55
6757 45
6757 95
6758 45
6758 95
754 91
755 91
754 41
755 41
750 57
6757 47
6757 97
6758 47
6758 97
754 72
755 72
754 22
755 22
For 13 A fused connection unit Cat.No 743 60 For 13 A fused connection unit switched Cat.Nos 743 61/62/63 For DP switches 45 A Cat.Nos 6746 40/41/42 depth 48 mm: 891 17
Not needed
750 59
754 50
755 50
754 00
755 00
Not needed
750 60
6757 30
6757 80
6758 30
6758 80
754 51
755 51
754 01
755 01
750 26
6757 26
6757 76
6758 26
6758 76
754 76
755 76
754 26
755 26
For 2 x 2 modules 4 x 1 module 2 x 1 + 2 modules For 1 x 3 modules 3 x 1 module 1 + 2 modules For 13 A twin switched socket outlet Cat.Nos 741 43/44/47/48
750 28
6757 28
6757 78
6758 28
6758 78
754 78
755 78
754 28
755 28
750 29
6757 29
6757 79
6758 29
6758 79
754 79
755 79
754 29
755 29
Not needed
750 56
6757 46
6757 96
6758 46
6758 96
754 93
755 93
754 43
755 43
For DP switch 45 A Cat.No 740 69 For shaver socket Cat.Nos 744 86 6745 86/87
Not needed
750 58
6757 48
6757 98
6758 48
6758 98
754 98
755 98
754 48
755 48
6745 56
6757 36
6757 86
6758 36
6758 86
6745 58
6757 38
6757 88
6758 38
6758 88
For 12 modules
6745 59
6757 39
6757 89
6758 39
6758 89
For 18 modules
6745 60
6757 40
6757 90
6758 40
6758 90
340
341
MosaicTM
German standard (60 mm fixing centres) flush boxes, support frames and cover plates COVER PLATES COVER PLATES (p. 365)
White
MODULES
750 31
2 x 313 01
2 x 748 32
2 x 748 42
750 35
2 x 313 01
2 x 748 32
2 x 748 42
750 38
750 36
3 x 313 01
3 x 748 32
3 x 748 42
750 39
see p. 365
342
MosaicTM
American standard (83.5 mm fixing centres) support frames and cover plates SUPPORT FRAMES (p. 363)
MODULES CLASSIC
White
Pearl grey
Stardust grey
Soft sun
Bronze
Glossy silver
Matt silver
Glossy gold
Matt gold
750 11
755 61
754 11
755 11
750 12
755 62
754 12
755 12
750 13
755 63
754 13
755 13
750 15
755 65
754 15
755 15
750 16
755 66
754 16
755 16
For flush box 4 x 4 For 4 x 1 module 750 17 6757 17 6757 67 6758 17 6758 67 754 67 755 67 754 17 755 17
748 18 For 2 x 3 modules 750 18 6757 18 6757 68 6758 18 6758 68 754 68 755 68 754 18 755 18
see p. 363
343
MosaicTM
Italian standard (83.5 mm fixing centres) flush boxes, support frames and cover plates FLUSH BOXES
(p. 382) MODULES
SUPPORT FRAMES
(p. 366) CLASSIC
EVOLUTION
METAL
White
Pearl grey
Stardust grey
Soft sun
Bronze
Glossy silver
Matt silver
Glossy gold
Matt gold
For 1 module
750 05
755 55
754 05
755 05
For masonry 892 39 For 2 modules 748 03 750 06 6757 06 6757 56 6758 06 6758 56 754 56 755 56 754 06 755 06
Superbox 891 07
For 3 modules 2 x 4
750 07
755 57
754 07
755 07
For dry partitions: 893 42 For 4 modules For masonry: 892 49 Superbox: 891 26 748 04 750 10 6757 10 6757 60 6758 10 6758 60 -
For dry partitions: 893 43 For 6 modules Superbox: 891 27 748 06 750 14 6757 14 6757 64 6758 14 6758 64 -
see p. 366
344
MosaicTM
French standard (60 mm fixing centres)(1) flush and surface mounting boxes, support and cover plates SURFACE BOXES (p. 370) SUPPORT FRAMES (p. 368) COVER PLATES (p. 369)
FLUSH BOXES(3)
DRY PARTITION (p. 383/384) MASONRY (p. 385)
MODULES
White
748 01
750 01
Square boxes:
depth 40 - 893 depth 40 - 893 depth 50 - 893 depth 60 - 893
Round boxes:
depth 30 - 892 depth 40 - 892
2 modules
40 41 51 61
41 51 61
23 24/26
depth 30
893 14
depth 40
Batik 3 modules
depth 40 - 893
90
Batik 4 modules
depth 40 - 893 depth 50 - 893
depth 40
893 24
748 04
750 10(2)
42 52
Batik
Batik
depth 40 - 2 depth 50 - 2 depth 60 - 2
depth 40
893 24
2 x 748 02
750 22
2 x 2 modules
42 52
Batik
Batik
depth 40 - 3 depth 50 - 3 depth 60 - 3
6 modules
43 53
depth 40
893 25
748 06
750 14(2)
Batik
Batik
depth 40 - 3 depth 50 - 3 depth 60 - 3
depth 40
893 25
3 x 748 02
750 23
3 x 2 modules
43 53
depth 40
893 89
(1) Except Cat.No 891 00 (2) Available in Mosaic evolution finish (p. 367) (3) For concrete see p. 386 (4) Available in Mosaic evolution finish (p. 369)
345
MosaicTM
screw terminals - control units
6741 60
6741 68
740 30
6744 30
740 42
6744 31
Pack
Cat.Nos
Switches 10 A - 250 V
Pack
Cat.Nos
Push-buttons 6 A - 250 V
White
Pearl Grey
Single module mechanisms 1 module 22.5 x 45 mm 1 way switch 2 way switch 2 way switch with indicator(1) 2 way switch with label holder Can be lit with lamps(1)
10 10 10 10
White
Pearl grey
Single module mechanisms 1 module 22.5 x 45 mm 1 way push-button 2 way push-button 2 way push-button with indicator(1) 2 way push-button with label-holder Can be lit with lamps Push-button with bell symbol Two module mechanisms 2 modules 22.5 x 45 mm
10/100 10 10 10
10 10 10 10 1 10
Two module mechanisms 2 modules 22.5 x 45 mm 6741 60 1 way switch 6741 61 2 way switch 6741 64 Intermediate switch 6741 62 2 way switch with indicator(1) 2 way indicator switch without neutral 6 A - 250 V - 60 W min. 2 way switch with label- holder Can be lit with lamps(1)
10
6744 30 6741 77
10 10 10
1 way push-button 2 way push-button 2 way push-button with indicator(1) 2 way push-button with label-holder Can be lit with lamps Push-button with bell symbol
10 10
740 20 6741 63
Switches 16 A - 250 V
White Pearl grey
10
6744 31
Single module mechanisms 1 module 22.5 x 45 mm 1 way switch 2 way switch 2 way switch with indicator(1) 2 way switch with indicator(1) and label-holder
10
White Pearl grey
10 10 10 10
740 50 6741 70
10
Switches 20 A - 250 V
White Pearl grey
10
740 51 6741 71
Double pole switch with indicator(1) Double pole switch with indicator(1) and "WATER HEATER" marked
10 10 10
Single module mechanisms 1 module 22.5 x 45 mm 6741 68 1 way switch 6741 69 2 way switch 2 way switch with indicator(1)
740 54 6741 72
(1) Use lamps Cat.Nos 899 01/02/06/07 Bold pack quantities : Minimum quantities to be ordered Red catalogue numbers: New products
346
MosaicTM 2 piece
screw terminals - DP switches, fused connection unit
MosaicTM
automatic terminals - control units
6741 86
740 69
6741 55
Pack
Cat.Nos
Switches 10 A - 250 V
White
Pearl grey
Single module mechanisms 1 module 22.5 x 45 mm 1 way switch 2 way switch 2 way switch with indicator(1) Two module mechanisms 2 modules 22.5 x 45 mm
10 10 10
743 63 + 750 60
6741 53 6741 54
Pack
Cat.Nos
10 10 10
6741 55 6741 56
White
740 59
Push-buttons 6 A - 250 V
BS Type boxes Cover plates (see p. 360 to 362) 2 modules Flush mounting boxes (p. 275) 1 gang DP switch - white rocker DP switch + neon - red rocker DP switch + neon - white rocker 2 gang Conform to BS 3676: Part 1 DP switch + neon
Single module mechanisms 1 module 22.5 x 45 mm 1 way push-button 2 way push-button Push-button with indicator(1) Two module mechanisms 2 modules 22.5 x 45 mm
10 10 10
10 10 10
White
740 69
10
740 95
6741 82
10
740 97
6741 83
White
Conform to BS 1363: Part 4 Cover plates (see p. 341) Double pole - fused 13 A (fuse supplied) Flex outlet knockout and cord grip Captive fuse carrier (padlockable) Captive terminal screws Dimensions : 86 x 86 mm Unswitched
743 60
743 61
743 62
Unswitched + neon
743 63
Switched + neon
(1) Use lamps Cat.Nos 899 01/02/06/07 Red catalogue numbers: New products
347
MosaicTM
dimmers and lighting control
744 06
744 05
744 16
744 10
744 08
Pack
Cat.Nos
Dimmers 230V
A - 50 Hz
Pack
Cat.Nos
Dimmers 230 V
A - 50 Hz (continued)
1/20
Conform to BS EN 550 14 For installation in place of a flush-mounted White Pearl grey switch in box depth 40 mm 2 modules Push-button dimmer 744 06 With an on/off button and a separate +/- button for dimming With dimming level memory (can be cleared) Controls and dims: 40 to 300 W incandescent and halogen lamps 230 V , and ELV halogen lamps with ferromagnetic and electronic transformer Can be controlled remotely using nonilluminated push-buttons or can be used as a 2-way switch without changing the second 2-way switch (configurable operation) 2 modules Rotary dimmer 744 05 6741 92 Operates: 60 to 50 W halogen and incandescent lamps 230 V 60 to 500 VA ELV halogen lamps with ferromagnetic transformer and compensator Cat.No 401 39 (p.147) 2 modules Rotary switch dimmer 744 01 Operates: 100 to 500 W halogen and incandescent 230 V with "mains voltage present" indicator light Variapush - Touch dimmer 744 00 Operates: 60 to 300 W halogen and 230 V incandescent 60 to 300 VA ELV halogen with last test memory and "mains voltagepresent" indicator light (for ferromagnetic transformer) Switching on and off by single touch on touch sensitive plate - Dim lights by holding finger on plate Touch dimmer 744 15 6741 94 Operates: 60 to 500 W halogen and incandescent 230 V 60 to 300 VA ELV halogen Can be controlled remotely using nonilluminated push-buttons or a maximum of 5 peripheral switches Cat.No 744 23. Switch lights on or off by single touch on touch-sensitive plate Dim lights by holding finger on plate 2 modules Peripheral 744 23 6741 95 Connect to Cat.No 744 15 above
White 2 modules
Pearl grey
Power rotary dimmer Operates: 100 to 1 000 W incandescent and halogen lamps 230 VA fluorescent lamps (please consult us) Must operate with a 100 W resistive precharging unit (incandescent lamp type) Can control up to fifteen 2 x 18 W ballasts, eight 2 x 36 W ballasts or ten 58 W ballasts Cannot be combined with other Mosaic mechanisms Supplied complete 2 modules Rotary dimmer 0 - 10 V 744 04 6741 96 For 26 mm fluorescent tubes For switching on/off and dimming fluorescent tubes via electronic ballast integrated 0 - 10 V control dimmer Maximum control current: 40 mA Maximum power: 400 VA 744 16
Lighting control
Use with remote dimmer Cat.No 036 70 (p.144) 2-position double push-button: switch on and increase brightness switch off and decrease brightness Control potentiometer Dimming from 0 to 100 % by rotary control Control with 3 preset levels Factory pre-set at : Level 1 - 33 % Level 2 - 66 % Level 3 - 100 % The pre-set levels are adjustable by internal push-button
OFF
2 modules
744 10
2 modules
744 09
2 modules
744 08
Modular dimmers
see p. 144
Bold pack quantities : Minimum quantities to be ordered Red catalogue numbers: New products
348
MosaicTM
control units
744 27
744 20
747 56
- 50/60 Hz
2 modules
Screw connection With override push buttons for switching the lighting on and off manually Infrared detection, detection distance: 10 m max Horizontal detection angle: 180 Adjustable detection sensitivity Brightness adjustable from 3 to 1 000 lux Time delay adjustable from 1 s to 16 min Cycle repeated as long as movement is detected Remote manual control possible with N/C push-button Integrated self-protection against overloads and short-circuits For installation in min. 40 mm deep box With manual on/off function No neutral, 2-wire Operates: 40 to 300 W incandescent and halogen lamps 230 V , and ELV halogen lamps with ferromagnetic and electronic transformer. For installation in place of a switch, with no additionnal wiring
744 42
Pull-cord mechanisms
2 modules
250 V
- with indicator
(1)
10 10 10
Two-way pull-cord switch 10 A Push-button 6 A Cord for pull-cord mechanisms Length 1.5 m
Wall-mounted transmitters
With coded infrared signals Range: semi-circle of 6 m radius Supplied with wall-mounting brackets (with a theft-resistant clip-in system) Accept 2 x 1.5 V alcaline batteries LR 03 (supplied) Dimensions 86 x 80 x 20.5 mm
White
744 26
744 27
2 modules
With neutral, 3-wire Operates: - Up to 1 000 W incandescent and halogen lamps 230 V - Up to 500 VA ELV halogen lamps with ferromagnetic and electronic transformer Can control ventilation Totally automatic control
746 21
1 channel
746 22
3 channels
744 72
With neutral, 3-wire Operates: - 1 000 W incandescent and halogen lamps 230 V - 500 VA fluorescent lamps The neutral must be distributed Can control 100 VA ventillation
Buzzer
1 module
10
747 56
230 V
744 20
Conforms to interference suppression standards EN 55014 Operates: 500 W incandescent and halogen 230 V 400 VA fluorescent lamps 500 VA ELV halogen lamps Adjustable from 1 to 20 min. (for toilets, staircases, lighting cellars from the main house) Remote control using push-buttons (non-illuminated) Enables the switch to be used as a timer Neutral must be distributed Equiped with Led Use lamps Cat.Nos 899 01/02/06/07
(1) Use lamps Cat.Nos 899 01/02/06/07 Red catalogue numbers: New products
349
MosaicTM
control units
MosaicTM
ventilation control - heating
740 62
740 63
740 27
744 35
Pack
Cat.Nos
Pack
Ventilation control
Rotary speed controler for fan
10
740 25
Double switch
10
744 17
6741 98
740 26
Operates: 40 to 400 VA limit switch For progressive speed control of ceiling fan AC speed control 4 positions Two-way switch For direct control of mechanical ventilation 10 A - 250 V
740 28
6 A - 250 V Single pole switch Supplied with key No 601 type 740 61 3 positions switch 2 N/C + 1 N/O Key removable all 3 positions 740 62 2 positions switch 1 N/O + 1 N/C Key removable in both positions
740 27
740 60
10 A - 250 V Emergency stop mushroom head push-button Unlock with No 455 key type N/O + N/C Emergency stop Stay put 1/4 turn release N/O + N/C contact
1
2 modules White
740 63
744 35
20
30 25
15 10
5
Thermostat
2 modules White
744 70
350
MosaicTM
energy and access control
MosaicTM
energy and access control
Inserting key fob Cat.No 898 06 or an access card supplies power to a room, only when the occupant is present
STOP
6741 89
6741 90
6741 91
Pack
Cat.Nos
1 10
744 45
6741 89
Key fob switch Key fob Enables use of key fob switch Cat.No 744 45 in hotels with key locks Supplied complete with a label holder for individual hotel identification
Hotel type access cards (credit card format) can also be used with the key fob switch
898 06
15
Outline diagram
N
Lexic modular contactor, Cat.No 040 49 or Mosaic single-pole relay, Cat.No 744 40
Call indicator
The indicator lamp and push-button, Cat.No 744 47 or 6741 90 allows the staff to find out the room status at any time
744 31
351
MosaicTM
voltage surge protectors
MosaicTM
MCBS
744 65
744 66
744 53
744 59
Pack
Cat.Nos
744 67
Pack
Cat.Nos
Localised protection for mains supply of computer and electronic equipment Can be connected to a socket 2 modules Voltage surge protector 744 65 16 A - 250 V - 50/60 Hz Same specifications as Cat.No 744 66 but without filter function
1 1 1
Used for local protection of part of a circuit (e.g. 2 P + socket) against overloads and short-circuits Used in tradition to the main protection as it is both close to the user and discriminating vis-a-vis the main protection, and can therefore be reset immediately The Mosaic proximity MCB can also be used as a local consumption limiter (depending on its rating) Breaking capacity: 3 000 A (10 A - 16 A) 1 500 A (6 A) 2 modules Single pole + neutral 230 V 744 51 6A 744 52 10 A 744 53 16 A
RCBO
Single pole + neutral 230 V The RCBO is used to protect people (premises with a conductive floor, presence of water, etc.) against direct contact with live parts or leakages to earth With test button 2 modules 30 mA(1) 744 59 16 A
Display of operation by indicator Nominal discharge current: 1.5 kA Maximum current accepted: 3 kA Protection level: 1.2 kV Earth conduction threshold: 1 mA 2 modules Voltage surge protector + filter 744 66 6 A - 250 V - 50/60 Hz Supplied with 5 x 20 - 6.3 A fuse Cat.No 102 63
Display of operation by voltage surge protector indicator Nominal discharge current: 1.5 kA Maximum current accepted: 3 kA Protection level: 1.2 kV Attenuation of the filter measured according to CISPR 14 and 17
0 10.0 20.0 30.0 40.0 50.0 60.0 100 KHz Frequency in MHz Attenuation in dB 0.1 10 1 MHz 0.5 25 1 30 10 MHz 5 45 10 45
744 67
Replacement module For Cat.Nos 744 65/66 above Replaces the module after it has been used
352
MosaicTM
ancillary mechanisms
6741 87
6741 88
743 94
Pack White
Ancillary mechanisms
Blanking plate
10
743 91 743 92
6741 87 6741 88
10/100
1 module White
Cord outlet
10
743 99
2 modules
10
743 98
p. 112 DX 6000 6 kA
p. 114 DX RCD
10
743 93
10
743 94
p. 112 p. 127
Special sockets for fitting on DLP trunking system
see p. 562-563
>
353
Bold pack quantities : Minimum quantities to be ordered Red catalogue numbers: New products
MosaicTM
visual indication
MosaicTM
visual indication technical characteristics
2 way switch and push-button with indicator Cat.Nos: - 740 02/12/32/37/42/51 in white finishes - 6741 52/62/75/80/71 in pearl grey finishes 2 way switch and push-button with label holder Cat.Nos: - 740 03/13/33/43 in white finishes - 6741 76/81 in pearl grey finishes 2 way switch and pull-cord push-button Cat.Nos: - 740 14/44
747 01 Pack Cat.Nos 1 module 747 30 with 747 32 747 25 Voltage 12 V 24 V 230 V 230 V Lamp for illuminated label function 899 01 899 02 899 07 Lamp for indicator function 899 01 899 02 899 06 Type of lighting white white green orange
Illuminated functions
Indicator units Single transparent(1) Single red(1) Single orange(1) Single green(2) Double (supplied with set of lenses in above colours) Low output downlighter 12 / 24 / 48 V with LED 230 V with LED Overdoor light unit
10 10 10 10 10
Lamps Cat.Nos 899 01/02/07 are supplied with a Capvis cap for connecting the neutral wire To ensure correct operation, lamp Cat.No 899 06 must never be used with illuminated labels Indicator units Cat.Nos 747 00/01/02/03/05
Voltage Lamp for diffuser Lamp for diffuser
1 1 10
747 21 747 22
2 modules
747 30
10 10 10 10 1
747 25
Lampholder and base unit Supplied without diffuser Requires E 10 Legrand lamps (max. 5 W) below Diffusers for above Transparent Red Orange Green Miniature emergency light unit Illuminates automatically upon power failure Unclips from frame to become portable Can be permanently attached to frame LEDs indicating mains and charging status
12 V 24 V 230 V
Lamps
For switches, indicators light unit and other low output light fittings For switches: indicator and locator usage Supplied with rapid connection device for neutral wire
10 10 10
747 21
= 24 V= 48 V=
Current 32 mA 32 mA 38 mA 42 mA 42 mA 42 mA 46 mA
899 01 899 02
12 V - 0.4 W 24 V - 0.8 W
Application example
Downlighters for emergency lighting Cat.No 747 22 for emergency lighting in areas in which people move around (corridors, hospital, etc) Cat.No 747 21 for emergency lighting for technical equipment work surface (laboratory, etc) control unit
For indicator usage 230 V (1.7 mA) 899 06 Bright orange neon Supplied with rapid connection device for neutral wire 899 07 230 V (0.55 mA) (Low consumption green fluorescent lamp) For time-lag switch, push-buttons etc Lamps for indicators units 12 V - 0.4 W for orange, red, transparent, green indicator 24 V - 0.8 W for orange, red, transparent, green indicator 230 V (1.7 mA) for orange, red, transparent indicator units 230 V (1.7 mA) for green indicator units E 10 lamps for overdoor / night light units 230 V - 3 W 12 V - 5 W 24 V - 5 W 230 V - 5 W 110 V lamps on special request
10
10 10 10 10 10 10 10 10
3m
ma
x.
(1) Use lamps Cat.Nos 899 11/12/16 (2) Use lamps Cat.Nos 899 11/12/17
354
MosaicTM
data sockets Cat. 5e and Cat. 6
MosaicTM
data sockets - 110 connect
742 85
742 80
742 13
6339 80
6339 81
742 84
742 87
742 96
332 60
Conforming to ISO 11801 - 2d Fast connection sockets - no tool required Contacts marked with dual colour code 568 A and B and number Connectors with insulation displacement contacts Possible to re-wire in the event of an error Multidirectional cable entry enables installation in shallow trunking, 34 mm for UTP and FTP connectors, 50 mm for STP Take RJ 45, RJ 12 or RJ 11 plugs with no distortion of the contacts
Pack Cat.Nos Cat. 5e Cat. 6
Transmission of voice, data and image Enables RJ 45 Cat. 5e and Cat. 6 installation conforming to ISO 11801 - 2d Fast tool connection insulation for displacement terminals IDC lateral connection Double colour code EIA 568 A and B Transparent label holder
Pack Cat.Nos Cat. 5e Cat. 6
RJ 45 - 110 connect
UTP (without screen)
Mosai c 45
RJ 45
10 10 10 10 10
10 10/100 10 10 1 1
742 83 742 84
747 89 747 88
10 10 10 10
UTP 8 contacts 1 8 contacts 2 FTP 9 contacts 1 9 contacts 2 9 contacts - installation at 90 2 possible on columns and mini-columns STP - metal shielding The shielding is easy to fit once the socket is connected 1 shielded 1 1 shielded 2 1 Zamak shielded 2 2 RJ - 2 Zamak modules 2 Coloured label holders 5 red and 5 green 1 5 red and 5 green 2 Splitters A splitter enables the use of a patch panel port or RJ 45 socket for two applications The splitter makes two RJ outputs available according to the planned uses 1 telephone + 1 Ethernet 100 base T-UTP 2 RJ 45 telephones (independant wiring) 2 ISDN telephones 2 Ethernet 100 base T-UTP
10 10
742 13 742 14
6339 80 6339 81
8 contacts
45
1 2
Mos
aic
8 contacts
Cat. 5e
FTP (with screen) 9 contacts 9 contacts STP shielded EMC shielding cover 1 2
10
742 63 742 64
10
10
742 96 742 97
9 contacts 9 contacts
1 2
10
1 5
332 60 332 61
355
>>>
MosaicTM
data sockets
742 60
2 modules
742 27
2 modules
742 28
2 modules
742 29
Avaya RJ 45 sockets
At the heart of the system, the Cat. 6 channel or link includes the patch panel, the cable, the RJ 45 socket, and for the channel, the patch and user cords. These assemblies are covered by a 20-year guarantee. Invest in the future
2 modules
RJ 45 sockets fitted with a special Modular Jack 110 connect standards Fitted with transparent label holder Gigaspeed Cat. 6 With MGS 400 connectors 8 contacts with shutter With 2 MGS 400 connectors 8 contacts Without shutter Power SUM Cat. 5e With MPS 100 E connectors 8 contacts - with shutter With 2 MPS 100 E connectors 8 contacts - without shutter
742 98
742 99
2 modules
742 50 742 60
Miscellaneous
2 modules
An essential part of the system, the new connector is easy to cable using UTP, FTP or STP
10
742 35
Blanking plate with label holder Allows installations of special data sockets
Legrand has designed a range of high performance cables and cords offering every guarantee for Cat. 6 flow rates (Ethernet gigabit)
356
MosaicTM
TV sockets
MosaicTM
telephone sockets
743 76
743 82
743 44
Telephone sockets
Conform to British Telecom With IDC connection Single master Single secondary Single master Single secondary Line Jack module
1 module
10 10 10 10
6745 18 6745 19
2 modules
2 modules
Twin sockets TV: 5-68/120 - 862 MHz FM: 87.5 to 108 MHz (V. return Att 1.5 dB) Isolated (EN 50-083-2) TV - FM passage Att pass < 2 dB Reflex < 14 dB Daisy chain up to 4 sockets max. TV - FM terminal TV: 5 to 862 MHz FM: 5 to 862 MHz Att pass < 2 dB Reflex < 10 dB Supplied with terminating resistor Triple sockets Equipped with automatic connection terminal which clamps coaxial cable For hertzian and satellite installation with individual demodulator Enables the reception of digital transmissions Compatible with reception of hertzian and satellite networks signals 9.5 mm connector TV male/FM female "F" Sat connector - Att. < 2 dB TV: 5 - 68/120 - 862 MHz FM: 87.5 - 108 MHz SAT: 950 - 2 400 MHz TV - FM - SAT
10
743 77
743 29 743 30
1 module
10
743 28
2 modules
10
743 81
10/100
743 38
743 80
RJ 11 and RJ 12 sockets
1 module
1/4 turn IDC connection (possible looping) RJ 11 4 contacts with shutters and label holder
10
742 61
2 modules
10
743 41 RJ 12
4 contacts
10
743 42
6 contacts
2 modules
10
743 76
10
743 32
10
743 75
TV - FM - SAT - 2 cables Enables the satellite connection to be added to an existing installation without coupling by dropping a second cable into the socket
RJ 45 sockets (ISDN/Internet)
2 modules
10
743 44
1/4 turn IDC connection (possible looping) 8 contacts with 2 mm2 earth terminal
Loudspeaker sockets
Screw connection (back) - Automatic (front)
10
10
733 01
2 modules
10
733 02
10
10
20 20 20
357
MOSAICTM
>>>
MosaicTM
shaver sockets
m to Confor 58-2-5 15 EN 6
893 23
Shaver sockets IP 24 - IK 04
Matt silver
Conform to EN 60742 and EN 61558-2 Power supply 230 VA - 50/60 Hz and 1 output 120/220 V Connection via automatic terminals Equipped with a circuit separation transformer to isolate the user from the mains supply Protected against overloads and short circuits by built-in thermal relay limiting the available power to 20 VA Insertion of the plug activates the power supply to the transformer 230 V / 120-230 V - 50-60 Hz 744 86 With integrated support For cover plate (see p. 341) For flush mounting boxes, use 2 gang box, 50 mm deep Cat.No 893 52, 891 12 or 2 x 892 51, and for surface mounting box, use Cat.No 893 23 (below) Takes the following pins European 4 mm, fixing centres 19 mm
Matt gold
Glossy metal
115 V 230 V
230 V
115V
1 1 5 10
Conform to BS EN 60742 and BS EN 61558-2-5 6745 86 120 V / 120 - 230 V 6745 87 230 V / 120 - 230 V with earth connector Boxes 893 23 Surface-box depth 50 mm Also used to replace old shaver sokets 891 12 Flush-box 136 x 70 x 44 mm
358
MosaicTM
British standard socket outlets
741 40
741 39
741 41
741 48
Socket outlets 2 P +
T modular units
Pack
Cat.Nos
Socket outlets 2 P +
T (continued)
Shuttered for child safety ASTA licence Use 2 or 3 modules cover plates, and support frames 13 A Conform to BS 1363: part 2
2 modules
741 45
DP 1 gang
10
741 40
3 modules
2P+
10
741 46 741 47
5 5
741 39 741 38
741 48
3 modules
741 20
T - switched
741 25
DP 1 gang
Socket outlets 2 P +
Shuttered for child safety Use special cover plates (p. 340) 15 A - 250 V - Single pole switched Conform to BS 546
10
741 22
1 gang
10
741 23
1 gang + neon
13 A - 250 V
Conform to BS 1363
10
741 41
10
741 42
1 gang + neon
741 43
2 gang
741 44
2 gang + neon
359
MosaicTM
British standard support frames
MosaicTM
British standard cover plates Classic
748 26
748 28
750 29
6745 56
750 59
750 60
10
750 26
86 x 86
750 27
86 x 86
750 29
For 3 modules
86 x 146
10 10 10
750 28 750 55
For 2 x 2 modules For 5 A and13 A switched socket outlet 1 gang box For 15 A switched socket outlet 1 gang box For 13 A twin switched socket outlet 2 gang box For 45 A double pole switch 2 gang box and shaver socket For 13 A fused connection unit 1 gang box For 13 A fused connection unit 1 gang box
86 x 146 86 x 86
748 26 1748 26
Square for 1 and 2 modules With earth connector For 1 gang box - 60.3 mm fixing centres
10
10 10 10 10
Rectangular for 3 modules With earth connector Rectangular for 2 x 2 modules With earth connector
10
750 57 750 56
86 x 86 86 x 146
10
10
750 58
146 x 86
10
750 59
86 x 86
5 5 2 2
10
750 60
86 x 86
1 1 1
10 10
360
MosaicTM
British standard cover plates Metal
754 77
755 78
754 93
755 93
755 27
754 28
754 41
755 01
Pack
Cat.Nos
Glossy silver
Matt silver
Glossy gold
754 76
755 76
88 x 88
754 26
755 26
For 1 module
88 x 88
754 77
755 77
88 x 88
754 27
755 27
For 2 modules
88 x 88
754 78
755 78
For 2 x 2 modules
88 x 148
754 28
755 28
For 2 x 2 modules
88 x 148
754 79
755 79
For 3 modules
88 x 148
754 29
755 29
For 3 modules
88 x 148
1 1
754 41
755 41
754 91
755 91
88 x 88
For 5 A and 13 A switched socket outlet 1 gang box For 15 A switched socket outlet 1 gang box For 13 A twin switched socket outlet 2 gang box For 45 A double pole switch 2 gang box and shaver socket For 13 A fused connection unit 1 gang box For 13 A fused connection unit 1 gang box
88 x 88
1 1
754 22
755 22
88 x 88
754 72
755 72
88 x 88
1
754 43
755 43
88 x 148
754 93
755 93
88 x 148
1
754 48
755 48
88 x 148
754 98
755 98
148 x 88
1
754 00
755 00
88 x 88
754 50
755 50
For 13 A fused connection unit 1 gang box For 13 A fused connection unit 1 gang box
88 x 88
1
754 01
755 01
88 x 88
754 51
755 51
88 x 88
361
MosaicTM
British standard cover plates Evolution
NEW
6757 27
6757 77
6758 27
6758 77
6758 78
6758 38
Pack
Cat.Nos
Pearl grey
Stardust grey
Soft sun
Bronze
10
6757 26 6757 76
86 x 86
10
6758 26 6758 76
86 x 86
10
6757 27 6757 77
86 x 86
10
6758 27 6758 77
86 x 86
10
6757 29 6757 79
For 3 modules
86 x 146
10
6758 29 6758 79
For 3 modules
86 x 146
10
6757 28 6757 78
For 2 x 2 modules
86 x 146
10
6758 28 6758 78
For 2 x 2 modules
86 x 146
10
6757 45 6757 95
86 x 86
10
6758 45 6758 95
86 x 86
10
6757 47 6757 97
86 x 86
10
6758 47 6758 97
86 x 86
10
6757 46 6757 96
For 13 A switched socket outlet 2 gang box For 45 A double pole switch(4) 2 gang box and shaver socket
86 x 146
10
6758 46 6758 96
For 13 A switched socket outlet 2 gang box For 45 A double pole switch(4) 2 gang box and shaver socket
86 x 146
10
6757 48 6757 98
146 x 86
10
6758 48 6758 98
146 x 86
10
6757 30 6757 80
For 13 A fused connection unit 1 gang box Evolution cover plates with support frames supplied
86 x 86
10
6758 30 6758 80
For 13 A fused connection unit 1 gang box Evolution cover plates with support frames supplied
86 x 86
5 5 2 2
5 5 2 2
362
MosaicTM
South Africa, US and Euro US standards socket outlets
MosaicTM
American standard support frames and cover plates Classic
741 80
741 79
741 02
741 00
748 11
748 18
750 13 (equipped)
Pack
Cat.Nos
741 20
2P+
T switched
10
748 11
741 21
2P+
T - switched dedicated
10
748 03
15 A - 127 V 2P
10
10
741 78
2 modules
748 15
10
741 80
3 modules
2P+
T T
10
748 18
741 79
2x2P+
10
741 01 741 61
2 modules
Clip-on via notches onto screw or claw mounting supports Cannot be removed by hand Easy to remove with a screwdriver White RAL 9010 identical to DLP mini-trunking, skirting-trunking and adaptable trunking White
Dimensions (mm)
10
For 1 module For 2 modules For 3 modules Vertical mounting For 2 x 1 modules Vertical mounting only For 3 modules
10
741 02
3 modules
2P+
T
10
741 00
2x2P+
10
10
750 15
123 x 123
10
750 16
123 x 123
10
750 17
For 4 modules
123 x 123
10
750 18
For 2 x 3 modules
123 x 123
363
MosaicTM
American standard cover plates Metal
MosaicTM
American standard cover plates Evolution
NEW
754 65
755 68 (equipped)
6757 15
6757 68
754 12 (equipped)
755 15
6758 12
6758 65
Pearl grey
1 1
754 61 754 62
755 61 755 62
80 x 125 80 x 125
Stardust grey
10 10
80 x 123 80 x 123
754 63
755 63
For 3 modules
80 x 125
10
6757 13 6757 63
For 3 modules
80 x 123
754 65
755 65
For 2 modules
123 x 123
10
6757 15 6757 65
For 2 modules
123 x 123
754 66
755 66
For 3 modules
123 x 123
10
6757 16 6757 66
For 3 modules
123 x 123
754 67
755 67
For 4 modules
123 x 123
10
6757 17 6757 67
For 4 modules
123 x 123
754 68
755 68
For 2 x 3 modules
123 x 123
10
6757 18 6757 68
For 2 x 3 modules
123 x 123
Glossy gold
Matt gold
754 11 754 12
755 11 755 12
80 x 125 80 x 125
Soft sun
bronze
10
6758 11 6758 61
For 1 module
80 x 123
10
754 13
755 13
For 3 modules
80 x 125
10
754 15
755 15
For 2 modules
123 x 123
10
754 16
755 16
For 3 modules
123 x 123
10
6758 16 6758 66
For 3 modules
123 x 123
754 17
755 17
For 4 modules
123 x 123
10 10
754 18
755 18
For 2 x 3 modules
123 x 123
Red catalogue numbers: New products
364
MosaicTM
German standard socket outlets
MosaicTM
German standard support frames and cover plates Classic
741 30
741 32
741 35
748 32
750 38 (equipped)
748 46
748 48
Pack
Cat.Nos 2 modules
Pack
Cat.Nos
10
741 30
For 1 module For 2 modules For 2 x 2 modules Horizontal mounting only For 3 x 2 modules Horizontal mounting only For 2 x 2 modules Vertical mounting only
80 x 80 80 x 80 80 x 152
10
741 31
T T - tamperproof
10 10
10
741 32
2P+
10 10
10
750 36
80 x 223
10 10 10
750 38
80 x 162
T - dedicated orange
10
750 39
80 x 233
748 32
10
748 42
365
MosaicTM
International standards socket outlets
MosaicTM
Italian standards support frames and cover plates classic
741 05
741 52
741 74
750 06
750 07
International standards
Modular units socket outlets 2 P - 3 A - ELV - 12 mm fixing centres for Cat.No 500 05 plug (p. see below)
Pack
Cat.Nos
10 20
743 03
50 10 10
500 05 Plug for socket outlet Cat.No 743 03 2 P - 3 A - ELV 12 mm fixing centres pins 3.6 mm Can be used with call pear Cat.No 781 03 (p. 378) 741 03
1 module
10
2P+
T - 10 A on line
White RAL 9010
10
741 05
123 x 80
10
741 06
1 module
10
750 06
For 2 modules
123 x 80
10
750 07
For 3 modules
123 x 80
10
741 08
2 modules
10/100
750 10
For 4 modules
148 x 80
10
741 69
2 modules
10
750 14
For 6 modules
205 x 80
Australia 2P+ China 2 P + - 10 A - shuttered for child safety Israel 2 P + - shuttered for child safety 2 P + - dedicated shuttered for child safety Argentina 2P+
10
741 66
T - 10 A auto-switched T T T
2 modules
10
741 52
2 modules
10
741 74 741 75
10
2 modules
10
741 70
T - 10 A
Flush mounting boxes
see p. 382
Bold pack quantities : Minimum quantities to be ordered
366
MosaicTM
Italian standard cover plates Metal
MosaicTM
Italian standard cover plates Evolution
NEW
754 56 (equipped)
755 57
6757 06
6757 57
Pack
Cat.Nos
754 55
755 55
For 1 module
125 x 82
10
Pearl grey
Stardust grey
6757 05 6757 55
For 1 module
123 x 80
754 56
755 56
For 2 modules
125 x 82
10
6757 06 6757 56
For 2 modules
123 x 80
754 57
755 57
For 3 modules
125 x 82
10
6757 07 6757 57
For 3 modules
123 x 80
754 05
755 05
For 1 module
125 x 82
10
6757 10 6757 60
For 4 modules
148 x 80
754 06
755 06
For 2 modules
125 x 82
10
6757 14 6757 64
For 6 modules
205 x 80
754 07
755 07
For 3 modules
125 x 82
10
Soft sun
Bronze
6758 05 6758 55
For 1 module
123 x 80
10
6758 06 6758 56
For 2 modules
123 x 80
10
6758 07 6758 57
For 3 modules
123 x 80
10
6758 10 6758 60
For 4 modules
148 x 80
10
6758 14 6758 64
For 6 modules
205 x 80
367
MosaicTM
French standard socket outlets
MosaicTM
French standard support frames
741 11
741 16
748 02
748 52
Selection chart (p. 345) Flush mounting boxes (p. 382 to 386)
Pack Cat.Nos
Support frames
Screw mounting For 1 module For 2 modules Can be coupled for joining units together (2 x 2 modules, 3 x 2 modules) New coupling principle enabling work to be performed on one unit without removing the others, when several units used With adjustable feet (e.g.: for mounting on tiling) For horizontal mounting of 3 modules For horizontal mounting of 4 modules For horizontal mounting of 6 modules For horizontal mounting of 2 x 6 modules
2 modules
10 20/400
748 01 748 02
10
741 10
10/200
741 11 741 16
2P+ 2P+
T T - with cover
10
10
2 modules
Tamperproof socket outlets Used to identify a mains circuit (e.g.: inverter) and avoid connection of unnecessary equipment which may cause interference on the circuit 2P+
748 03 748 04
10
10
741 14
10
748 06 748 25
Claw mounting
10/200
748 12
10
For 1 module Clips into a 28 x 53.5 mm aperture For 2 modules Clips into a 58.5 x 53.5 mm aperture For 2 x 1 modules Clips into a 28 x 111.5 mm aperture Vertical mounting
10 10
Insulated boxes
Clip on to the above panel mounting frames for protection and isolation of mechanisms in the panel Mounted from the front face 748 51 1 module - For panel mounting frame Cat.No 748 50 748 53 2 modules - For panel mounting frame Cat.No 748 52
10
10
Modular
10
748 72
368
MosaicTM
French standard cover plates Classic & Evolution
750 01 (equipped)
750 02 (equipped)
750 10 (equipped)
748 46
748 47
Pack
Cat.Nos
10
750 01
20/200
750 02
80 x 80
10
748 46
IK 06 cover plate with shutter Install without support frame (already incorporated) Cover plate with membrane Install with a support frame Use instead of a standard Mosaic plate
10
750 22
148 x 80
10
748 47
10
750 23
205 x 80
10
750 07
For 3 modules
123 x 80
10/100
750 10
For 4 modules Horizontal mounting only For 6 modules Horizontal mounting only For 2 x 6 modules Horizontal mounting only Clipped on using slats for reduced thickness With label holder Evolution
148 x 80
10
750 14
205 x 80
750 42
213 x 213
Pearl Grey For 2 x 6 modules 6757 42 Used with support frame Cat.No 748 25
213 x 213
Stardust Grey
213 x 213
213 x 213
Bronze For 2 x 6 modules 6758 92 Used with support frame Cat.No 748 25
213 x 213
Bold pack quantities : Minimum quantities to be ordered Red catalogue numbers: New products
369
MosaicTM
surface mounting boxes for screw mounting equipment
MosaicTM adaptors
917 31
6806 33
893 20
893 24
893 27
748 61
748 62
Pack
Cat.Nos
Pack
Cat.Nos
White
5/100 5/100
893 14 893 20
80 x 80 80 x 80
10
Grey adaptor With smoked transparent cover White adaptor With transparent cover Grey adaptor With opaque cover padlockable with special tool below (not supplied) Security tool For 3 module Mosaic mechanisms Weatherproof IP 55 boxes with membrane Allows operations of switches without opening cover maintaining IP 55 rating
5/50
893 24
80 x 148
10
10
5/25
80 x 205
1
919 45
2/10 5
Conform to BS 5733
Moulded material boxes for the surface mounting of standard flush accessories White Back, side and internal knockouts Dimensions (mm) Depth 46 mm 6745 46 1 gang 86 x 86 6745 47 2 gang 86 x 146
20 20
6806 32 6806 33
White Grey
1 10
748 61 748 62
Adaptor for 1 module mechanism (width 22.5 x 45 mm) Adaptor for 2 module mechanism (width 45 x 45 mm)
10
Plexo 55 range
370
>>>
The level of light increases slightly : lighting adapts (in variation) or remains on.
> Reduction of the consumption of energy of the tertiary buildings. > No vertical wiring for a simplified installation and maintenance. > More comfort and freedom of use with radio and infra-red orders
The level of light becomes lower than the preset threshold : lighting ignites at once.
371
>>>
MosaicTM
lighting automation system
493 39
493 31/32
Power units
For installation in false ceiling Can be fixed on cable ducting Switch units For switching luminaires on/off 2 channels, 500 W each 4 channels, 500 W each Dimmer units For dimmer control of luminaires equipped with 1-10 V ballasts Used to adjust the lighting in relation to the external level of light in order to obtain the desired illumination 2 channels, 500 W each 4 channels, 500 W each Roller blind unit For controlling 2 shutters
1 unit
1 receiver
1 control
1 1
493 02 493 04
Sensors
The units are installed on cable trays, and the sensor or receiver in the false ceiling. No vertical cabling
1 1
493 30 493 39
1 1
493 31 493 32
Receiver Associated with the various power units, this is used for control via a remote control unit Mosaic or mobile Infrared For use with an infrared remote control unit Radio For use with radio remote control unit For installation in false ceiling Requires use of the configuration tool Cat.No 493 95 (p. 373) Movement detector Associated with the various power units, this is used for automatic control using presence detection, linking the light to a preset level and override via an infrared remote control unit Mosaic or mobile For installation in false ceilings With built-in infrared receiver With built-in infrared receiver and measurement of the level of light Enoldes linking the light to a preset level
With the configuration tool there is no need to work in the false ceiling
>>>
372
MosaicTM
lighting automation system (continued)
746 22
882 28
746 06
035 07
743 44
493 95
Pack
Cat.Nos
Infrared controls
With coded infrared signals Wireless wall-mounted remote controls Range: 1/2 circle with 6 m radius Supplied complete with wall bracket (with a tamperproof clip system) Dimensions: 86 x 86 20.2 mm Supplied with 2 alkaline batteries 1.5 V - LR03 1 way 3 way Mobile remote controls Range: 10 m Take 1 alkaline battery 9 V - 6F22 (not supplied) 3 way Supplied with wall bracket Dim: 135 x 40 x 22 mm 2 x 6 way Dim: 195 x 40 x 22 mm
Pack
Cat.Nos
Accessories
10 1
White
1 1
746 21 746 22
5 5 5 5
Grey
882 28 882 29
743 44 Bus access socket For connecting the configuration tool 493 95 Configuration tool For configuring power boxes without working in the false ceiling Connects to the bus by RJ 45 socket Cat.No 743 44 493 90 Line coupler For connecting several lines Cabling accessories 492 68 Cable length 2 m. RJ 12 - RJ 12 492 77 Cable length 6 m. RJ 12 - RJ 12 492 78 Cable length 20 m. RJ 12 - RJ12 492 69 Double RJ connector For connecting 2 detectors or infrared cells to one power unit input
Radio control
Wireless remote controls Mosaic Used for controlling the radio receivers For installation on any type of wall or fixing on a flush-mounting box with screws. Multi-gang joining possible Supplied with 3 V - CR1632 battery Take Mosaic cover plates (p. 369) 2 way 4 way Mobile remote controls Supplied with 9 V - 6F22 alkaline batteries 2 way. Dimensions: 135 x 40 x 22 mm 6 way. Dimensions: 135 x 40 x 22 mm 12 way. Dimensions: 195 x 40 x 22 mm
1 1
746 06 746 07
1 1 1
035 07 2 channels For local override or override local or remote push-button For forcing via switch or Keyswitch Connects to the bus line For operating 2 lighting or roller blind zones
see p. 369
373
MosaicTM
lighting automation systems
Technical characteristics
22 3 94
Movement detector with infrared receiver Cat.Nos 493 31/32 Connector: RJ 12 Power supply: 12 V standard Current consumed: 15 mA standard at 12 V Adjustable time delay: 10 seconds to 30 minutes Brightness measurement (Cat.No 493 32 only): 40 to 2 500 lux
Switch units 2/4 outputs Cat.Nos 493 02/04 Power supply: 230 V - 50/60 Hz Max power: 500 VA per outputs with 4 tappings Connectors: Power supply: 2.5 mm Outputs: 0.8 to 1.5 mm Push-button control inputs only on 4-output unit (Cat.No 493 04): 0.8 to 1.5 mm Sensor inputs: RJ 12 Bus: 0.6 to 0.9 mm Case construction: Class II
Detection area: Detectors Cat.Nos 493 31/32 are fitted with multi-zone Fresnel lens enabling a field of view of 360 and coverage of 50 m for a detector installed at height of 2.4 m
Cat.Nos Cat.Nos Cat.Nos Cat.Nos Cat.No 493 39 882 28/29 489 06/10/12 746 21/22 746 06/07
Cat.No 493 30
Cat.No 493 31
Cat.No 493 32
Cat.No 493 22
IR ON/OFF Radio
IR
Radio
Coverage area radius 3.3 m (35 m2) radius 3.6 m (40 m2) radius 4.0 m (50 m2) radius 4.3 m (60 m2)
Dimmer unit 1-10 V 2/4 outputs Cat.Nos 493 12/44 Power supply: 230 V - 50/60 Hz Max power: 500 VA per output with 4 jacks Connectors: Power supply: 2.5 mm Outputs: 0.8 to 1.5 mm Sensor inputs: RJ 12 Bus: 0.6 to 0.9 mm Case construction: Class II
2.4 m 2.6 m
~8m
IR -ON/OFF -Dimming Radio -Automatic IR -ON/OFF -Dimming -Daylight sensor Radio -With override
3
230V~ 50/60Hz 4 x 500 VA
Roller blind unit Cat.No 493 22 Power supply: 230 V - 50/60 Hz Max power: 500 VA per output with 2 jacks Connectors: Power supply: 2,5 mm Outputs: 0.8 to 1.5 mm Sensor inputs: RJ 12 Bus: 0.6 to 0.9 mm Case construction: Class II
Connection
Example with Cat.No 493 04
L, N, 3 L, N, BUS 4 L, N 2
IR Radio
493 04
Infrared receiver Cat.No 493 30 Connectors: RJ 12 Receiver construction: Class II Reception area
5 (m) 4 3 2 (m) 5 4 3 2 2 3 4 5 (m)
Examples of configuration
RJ 12 500 W Luminaires
740 40
493 31/32
20
Bus 1
Mosa ic 493 230 90 V 50 Hz
B1 B2 BUS A1 A2 1 2
V 00 ? A
5x4
V 00 ? A
AV
00 5
x V0 11
22
493 31/32
Power supply RJ 12 L, N, RJ12 L, N, 0-10 V Cable RJ12 492 68/77/78 RJ12 L, N, Up Down
2 3 4 5 (m)
OR 882 28 746 21
493 31/32 493 31/32 Radio wall control 489 30/40 IR wall control 746 21/22
039 95
493 30
zh M
29 ,3 34
L N
40 3
94
41 3
94
5x4
9 93 3
22
Radio remote control receiver Cat.No 493 39 Power supply: 230 V - 50/60 Hz Connectors: Power supply: 2.5 mm Bus: 0.6 to 0.9 mm Case construction: Class II
493 02/12
39 4
32 ~V0 06/05 zH
493 22
493
230V~ 50/60H
20
22
493 31/32
OR 882 28 746 22
374
375
>>>
376
MosaicTM
bell indicators
MosaicTM
bell indicators Principle for installation with 6 directions
Each direction connected to the bell indicator with 2 wires
Suitable for hotels, educational establishments, retirement homes, etc. 1 to 6 calls can be centralised using indicator lamps Calls controlled by pushbuttons 2 wires per direction Calls registered by numbered indicator lamps and a brief audible signal Several calls can be registered simultaneously Possible to clear directions individually Supplied with numbers It is possible to use a 24 V uninterruptible power supply
Pack Cat.Nos
Connection of directions
12 V or 12V
Call units
230 V (2)
127 V (2)
1 1
6-direction modules Can be used to create bell indicators as required Can be mounted on table-top 6 modules Control unit Cat.No 782 14 (p. 378) 780 36 With built-in power supply 127/230 V - 50/60 Hz 780 37 For external 12 V SELV power supply (not supplied)
1 1
780 26 780 32
1 1
780 27 780 33
(1) Only on Cat.Nos 780 27/37 (2) Only on Cat.Nos 780 26/36
377
782 12
782 13
782 14 + 782 13
782 63
782 52
782 59
783 62
Pack
Cat.Nos
782 89
4 modules
782 12
Supplied with metal bracket for screw fixing and white plate Can be surface mounted or flush mounted 2 modules Dual display corridor bulkhead light 782 63 Dual indicator (red/yellow) Fitted with long life leds which do not require any special maintenance Enables calls and nurse present to be displayed in the corridor 2 modules Door unit 782 52 Comprises 1 red indicator, 1 white indicator and 1 call cancel and nurse present button The indicators are fitted with long life leds which do not require any special maintenance 2 modules Call units 782 59 Socket for push-button cord or biomedical alarm 12 mm fixing centres Supplied on 2-module plate with blanking plate
2 modules
6 modules
782 58
Call registration via numbered indicator lights and audible signal Possibility of registering several calls simultaneously Display of reassurance and nurse present Possibility of transferring calls to 4 other display units (ex: treatment room, rest room, etc) Can be mounted: In flush mounting box, 50 mm deep, (3 x Cat.Nos 892 51/893 53) in surface mounting box Cat.No 893 25 on table-top control unit Cat.No 782 14 (see below) on DLP and DLP 3 D trunking 36 modules Table top control unit 782 14 Can take up to 6 display units Cat.No 782 13 Can be installed horizontally or vertically Dimensions: 310 x 295 x 75 mm
782 13
783 62
With 2 A normally closed contact Supplied with 2.5 m cord With 12 mm fixing centres for 2P socket Mount using Cat.No 743 03 (p. 366) 2 A push-button cord with two-way button Supplied with 2 m cord For mounting on plug Cat.No 500 05 (p. 366) Shunt plug for biomedical alarm 12 mm fixing centres Use with socket Cat.No 782 59 (see above)
781 03
782 80
378
Operating principle
Sequence: call from room 1 2 3
The red indicators on the door unit and corridor bulkhead light flash slowly
In the nurses station the room number flashes and the bell rings
4 A B C D
Number of beds
2 Calculate the number of directions To find the number of directions, simply add: E A+B +C =
In the nurses station, the nurse registers the call (reassurance): the bell stops, the indicator is lit
The red indicators in the room and the corridor bulkhead light stop flashing and remain lit
When the nurse enters the room, she presses the pushbutton on the door unit to indicate nurse present
7 3 Draw up your list of equipment Nurses station and management equipment Display unit Cat.No 782 13 = E /6 ie Management module Cat.No 782 12 = E /3 ie Option: Table-top control unit Cat.No 782 14 = E /36 ie display units modules control units bulkhead lights 10 = E ie = B + C ie = D ie = D ie door units call units sockets cords
All the indicators go out The indicators on the door unit and corridor bulkhead light change from red to yellow
Corridor equipment Corridor bulkhead light Cat.No 782 63 = E ie Room/bathroom equipment Door unit Cat.No 782 52 Bathroom call unit Cat.No 782 58 Bed equipment Socket for push-button cord Cat.No 782 59 Push-button cord Cat.No 783 62
When the nurse leaves the room, she cancels the call by pressing the pushbutton
Option : Shunt plug for biomedical alarm Cat.No 782 80 = D ie Socket for biomedical alarm Cat.No 782 59 = D ie Power supply Cat.No 782 89 (calculate based on the following table) = Power consumption table
Wiring diagram
230 V
2 pairs 6/10
2 pairs 6/10 782 52 782 63 782 58 hand-held remote control unit 782 13 6-way display unit Cat.No 782 13 6 pairs 6/10 for 3 directions per directions Management module Cat.No 782 12
1 pair 6/10 Door unit Socket for pushbutton cord Cat.No 782 59
0.8 W
1.2 W
0.8 W
0.8 W
2 pairs 6/10
NB: Usually, a maximum of 30 % of directions can be used simultaneously. Therefore, apply a coefficient of 0.3 to calculate the supply power
379
783 19
783 21
783 18
783 15
783 17
230 V - 50 Hz Extruded aluminium structure, IP 20, IK 04 Excellent resistance to cleaning agents supplied without tube or lamp Conform to standards EN 60598-1, EN 60598-2-25, EN 61547, EN 50102, EN 550 15
Pack Cat.Nos
Pack
Cat.Nos
White lacquer finish (RAL 9010) Lighting with snooth polycarbonate diffusers reflectors and overhead diffuser With ferrogmatic or electronic ballast with G5 lamp-holder for T5 tubes, G13 lamp-holder for T8 tubes and 2 G11 lamp-holder for lamps Class I, IP 20, CE Fireproof to 750 C for 30 seconds Possible attachements: - Mosaic wiring accessories (remote control socket base for push-button cord hand-held remote control units, pull-cord switch, socket outlets, telephone sockets) using Mosaic support supplied with cover plate - remote control module - night-light Viking 3 spring connection terminal blocks. Can be installed on their own or on adaptable DLP trunking, height 65 mm (see opposite page) NEW White Lighting unit for customer assembly, 1.10 m length 783 19 Ambient light: 1 x 36 W compact corrected Reading light: 1 x 24 W compact with ferromagnetic ballast Capacity for wiring accessories: 4 modules on each side Lighting unit for customer assembly, 1.21 m length 783 20 Ambient light: 2 x 39 W T5 Reading light: 1 x 36 W compact with electronic ballasts Capacity for wiring accessories: 6 modules (max.) on each side Lighting unit for customer assembly, 1.42 m length 783 21 Ambient light: 2 x 36 W T8 Reading light: 1 x 36 W compact with ferromagnetic ballast Capacity for wiring accessories: 8 modules (max.) on each side 783 22 Ambient light: 2 x 54 W T5 Reading light: 1 x 36 W compact with electronic ballasts complying the new european standard NF EN 124 64-1 (working area lighting) Capacity for wiring accessories: 8 modules on each side Night-light 783 25 Night-light: 8 W T5 with electronic ballast for Cat.Nos 783 19/20/21/22 For mounting in the ambient compartment Mosaic supports Enable lighting units equipement with Mosaic wiring accessories depending on maximum capacity for each Cat.No 2 modules 4 modules for Cat.Nos 783 19/20 6 modules for Cat.Nos 783 20/21/22 8 modules for Cat.Nos 783 21/22
783 18
1 1
783 15 783 16
783 17
20 10 5 5
380
DLP trunking
for evolutive lighting unit
783 69
783 66
783 68
783 65
Pack
Cat.Nos
Pack
Cat.Nos
15(1) 15(1)
80
783 69
Reading light and ambient light control buttons With ejectable plug (10 pin)
White lacquered aluminium base, length 3 m, supplied without cover White PVC base, length 3 m, supplied without cover White lacquered aluminium cover, length 2 m White PVC cover, length 2 m Aluminium separation partition, length 2 m PVC separation partition, length 2 m Joint for base (for aligning the bases during installation) Joint for cover
16(1) 20(1) 12
783 67
Reading light and ambient light control buttons Reading light, ambient light and roller shutter (up, down, stop) control buttons Compatible with module SOMFY CD4 Remote control socket base
783 66
48(1) 10
1 module
20
783 68
Non-ejectable (8-pin RJ 45) for hand-held remote control unit Cat.No 783 69 (above) Connector with insulation displacement terminals Ejectable (10-pin) for hand-held remote control unit Cat.Nos 783 66/67 (above) Connect on draw-out screw terminal blocks
Routing accessories
1 5 10 10 1
90 flat angle, white lacquered aluminium 90 flat angle, white PVC PVC end piece especially for aluminium bases (left or right) PVC end piece for PVC bases (left or right)
2 modules
783 65
783 71
For lighting units opposite Cord can be pulled from any direction
111 88 Claw-fixing cords for earthing aluminium bases and covers Mosaic support Supplied with finishing plate 109 21 109 41 109 61 109 81 2 modules 4 modules for Cat.Nos 783 19/20 6 modules for Cat.Nos 783 20/21/22 8 modules for Cat.Nos 783 21/22
20
A - 50/60 Hz
783 90
Unit for lighting with 2 single pole channels, breaking capacity: 500 W incandescent, 300 W fluorescent Provides VLV control of Elioflux lighting unit ambient and reading lights using a hand-held remote control unit Cat.No 783 69 via non-ejectable socket Cat.No 783 68 and hand-held remote control units Cat.Nos 783 66/67 or via ejectable socket Cat.No 783 65 or any other N/O pushbutton For mounting in lighting units Cat.Nos 783 15/16/17/19/20/21/22 Connect using draw-out screw terminal block Dimensions: 218 x 45 x 30 mm
10 5 5
381
313 01
892 39
891 25
891 26
Pack
Cat.Nos
Pack
Cat.Nos
250
Supplied without screws Can be used with Mosaic, Galea, Tenara, Creo, Valena and Suno ranges, Horizontal and vertical mounting 313 01 1-gang unit Can be fitted alongside one another Can be used as junction box with cover Cat.No 892 81 (see below)
10
10 5/100
10 10/200 10 20
Screws
100
10/100 10
894 01 894 02
382
Bold pack quantities: Minimum quantities to be ordered. Red catalogue numbers: New products
893 41
893 44
Pack
Cat.Nos
Pack
Cat.Nos
893 66 Standard
Junction boxes
Supplied with cover and screws
External box dimensions (mm) Cover dimensions (mm)
20 10 10 10 10 10
100
893 40
50
893 39
Depth 40
Depth 50
20
893 42 893 43
20
Drilling 65 mm Supplied with divider 893 52 2-gang vertical Can also be used for mounting 4 Mosaic horizontal modules 893 53 3-gang vertical Can also be used for mounting 6 Mosaic horizontal modules Horizontal boxes for 71 mm fixing centres For Galea,Tenara, Creo, Valena and Suno ranges
20 20
893 44 893 45
893 54 2-gang 893 55 3-gang For Mosaic 83.5 mm fixing centres 3 modules Mosaic 130 x 71 mm Fitted with "Clic & Stop" system 65 mm, depth 40 mm 2 x 6 modules Mosaic 195 x 120 mm Mounting with 4 metal claws
20
893 90
10
893 89
383
Fitting on site
1 3
893 57
893 47
Installing the unit, after attaching it to the frame with the threaded rod Cat.No 892 86 (p. 385) or Cat.No 892 43
2
Pack
Cat.Nos
50
10
50
For ceiling rose units 893 57 65 mm with cover Up to 25 kg can be suspended from it with rear attachment to a frame 892 43 Anchoring device Supplied with 2 m steel cable For securing a ceiling rose unit by attaching a frame Quick to install with automatic locking system Cable automatically tightened with no tool required For suspending up to 25 kg APAVE certified resistance For lighting unit 893 47 54 mm with cover
CLICK
Wires automatically connected to the plug cover terminal block Installation of the temporary lighting with lampholder plug Cat.No 601 33
DCL accessories
20
10
DCL lampholder plug 601 33 E 27 cap. For temporary lighting and testing the light spot Equipped with plug Cat.No 601 32
893 56 65 mm box for ceiling rose unit 893 46 40 mm box for striplight The customer uses the plug on the lampholder plug Cat.No 601 33
When the plug has been connected to the luminaire, the customer can safely carry out the connection
50
Plug-in ceiling rose units for masonry (p. 385) Plug-in ceiling rose units for concrete (p. 386)
384
=
CLICK
Cat.No 842 41 Cat.No 892 41
892 41
892 57
Vertical mounting of 2 or 3 gang Double and triple units can be created by joining 1-gang boxes Cat.Nos 892 41/51/61
Pack
Cat.Nos
Boxes
For screw and claw mounting wiring accessories (Mosaic, Galea, Tenara...) 1 gang box Round 65 mm mixed 892 23 Depth 30 mm 892 24 Depth 40 mm 892 26 Depth 40 mm (without screws) 1 gang box for joining together Square 70 x 70 mm - mixed Can be used in any combination to create vertical or horizontal fittings Supplied with screws protected from sprayed plaster 892 41 Depth 40 mm 892 51 Depth 50 mm 892 61 Depth 60 mm Covers To convert a box into a junction box Screw mounting cover on boxes 892 80 80 mm 892 81 80 x 80 mm Junction boxes with knock-out entries Supplied with cover and screws
External box dimensions (mm) Cover dimensions (mm)
50 20
The fixing screws are in the correct position to take Mosaic support frames
10 10 10 10 10
892 71(1) 892 72(1) 892 73(1) 892 74(1) 892 75(1)
Fixing luminaires
1
10
892 57 65 mm with cover Up to 25 kg can be suspended promit with rear attachement to a frame 892 86 Threaded rod, length 100 mm for anchoring to frame Supplied with M6 nut For lighting unit 892 47 54 mm with cover
The separate duct is screwed onto the threaded rod sealed in the frame
The box is clipped onto the duct The box is no longer supporting the weight of the light fitting
50
892 56 65 mm box for ceiling rose unit Supplied with hook The two-part cover provides a neat finish
50
385
895 11
895 50
895 51
Pack
Cat.Nos
Pack
Cat.Nos
50
For screw and claw mounting wiring accessories (Mosaic, Galea, Tenara, Creo, Valena and Suno ranges) 1 gang box - 60 mm Held on metal rail by compression Mainly used to hold magnets Cat.No 895 22 Entries for 4 20 mm and 2 25 mm tubes For screw-mounting wiring accessories using ring Cat.No 895 15 Can be combined to create multi-gang horizontal assemblies (2/3 or 4 -gangDepth 50 mm 71 mm fixing centres) 895 11 For cast concrete width 160 x 220 mm 1 gang box - 65 mm
100 50
20 50
Junction boxes
Rectangular drop boxes
50
Depth 60 mm
50
50
895 10 65 mm for mixed fixing For applications in wooden formwork or on metal panels with magnet 700 N (Cat.No 895 22) 895 60 Fixing cover for joining side by side fixing centres 86 mm, or vertical joining Accessories
50
100
895 15 65 mm ring for 1-gang box Cat.Nos 895 10/11 895 22 Fixing magnet Resin resistant to stripping agents For boxes Cat.Nos 895 10/11 895 61 Rigid cover For fixing on wooden panels
100
895 50 95 mm box 895 51 100 mm sleeve box for use in solid floor slab (as ceiling rose unit) and in primary slab (ceiling rose unit or sleeve) Accessories 895 54 Anchoring stick length 60 mm For fixing boxes Cat.Nos 895 50/51 895 70 Cover 100 mm with reduction to 60 mm for boxes Cat.Nos 895 50/51
100
50
386
For concrete
Technical characteristics
Multigang
Horizontal Box clips directly into place horizontally with no accessory
895 11 + 895 11
Junction boxes
895 51
Installation cover
387