Sie sind auf Seite 1von 7

PLC-RSC- 24DC/21

Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The General Terms and Conditions of Use apply to Internet downloads.

Extract from the online catalog

The illustration shows the version PLC-RSC-24DC/21

Order No. Ord designation EAN Pack Customs tariff Weight/Piece Catalog page information

2966171 PLC-RSC- 24DC/21 4017918130732 10 Pcs. 85364190 0,03535KG Page 58 (IF-2005)

Product notes
WEEE/RoHS-compliant since: IMPORTANT : This date is valid for Customers in Germany only. Date Format is MM/DD/YYYY.Please contact your local in-country Phoenix Contact location or designated business partner for a Logistics Compliant date in your area.In order to guarantee delivery of RoHS-Compliant product, please purchase Phoenix Contact parts from authorized Phoenix Contact representatives and distributors. 01.12.2005

PHOENIX CONTACT Inc., USA http://www.phoenixcon.com

Page 1/7 Mar 28, 2007

PLC-RSC- 24DC/21

Technical data

PHOENIX CONTACT Inc., USA http://www.phoenixcon.com

Page 2/7 Mar 28, 2007

PLC-RSC- 24DC/21
Coil side
Nominal input voltage UN Nominal input current at UN Typical response time Typical release time Operating voltage display Name of protection Protective circuit/component 24 V DC 9 mA 5 ms 8 ms Yes Polarity protection Polarity protection diode

Contact side
Contact type Contact material Maximum switching voltage Single contact, 1 PDT AgSnO 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) 12 V AC/DC (on request) 10 mA 6A 140 W (for 24 V DC) 20 W (for 48 V DC) 18 W (for 60 V DC) 23 W (for 110 V DC) 40 W (for 220 V DC) 1500 VA (for 250 V AC)

Minimum switching voltage Maximum inrush current Min. switching current Limiting continuous current Power rating (ohmic load) max. Power rating (ohmic load) max. Power rating (ohmic load) max. Power rating (ohmic load) max. Power rating (ohmic load) max. Power rating (ohmic load) max.

General data
Length Height Width Test voltage relay winding/relay contact Ambient temperature (operation) Operating mode Service life mechanical Standard designation Standards/regulations Standards/regulations Standards/regulations Standards/regulations Standards/regulations Standards/regulations Contamination class Surge voltage category 80 mm 94 mm 6.2 mm 4 kV AC (50 Hz, 1 min) -25 C ... 60 C 100% operating factor 7 2 x 10 cycles Standards/regulations IEC 60664 IEC 60664 A DIN VDE 0110 DIN EN 50178/DIN VDE 0160 (in relevant parts) DIN EN 50178/VDE 0160 IEC 60255/DIN VDE 0435 (in relevant parts) 3 III

Connection data
Type of connection Conductor cross section solid min. Conductor cross section solid max. Conductor cross section stranded min.
PHOENIX CONTACT Inc., USA http://www.phoenixcon.com

Screw connection 2 0.14 mm 2 2.5 mm 2 0.14 mm


Page 3/7 Mar 28, 2007

PLC-RSC- 24DC/21
Conductor cross section stranded max. Conductor cross section AWG/kcmil min. Conductor cross section AWG/kcmil max Stripping length Screw thread 2.5 mm 26 14 8 mm M3
2

PHOENIX CONTACT Inc., USA http://www.phoenixcon.com

Page 4/7 Mar 28, 2007

PLC-RSC- 24DC/21

PHOENIX CONTACT Inc., USA http://www.phoenixcon.com

Page 5/7 Mar 28, 2007

PLC-RSC- 24DC/21

Drawings
Diagram

Circuit diagram

PHOENIX CONTACT Inc., USA http://www.phoenixcon.com

Page 6/7 Mar 28, 2007

PLC-RSC- 24DC/21

Address
PHOENIX CONTACT Inc., USA 586 Fulling Mill Road Middletown, PA 17057 USA Phone (800) 888-7388 Fax (717) 944-1625 http://www.phoenixcon.com Phoenix Contact Technical modifications reserved;

PHOENIX CONTACT Inc., USA http://www.phoenixcon.com

Page 7/7 Mar 28, 2007

Das könnte Ihnen auch gefallen