Sie sind auf Seite 1von 6

Mackie D8B Old Motherboard BIOS Settings

AMIBIOS SIMPLE SETUP UTILITY VERSION 1.17


To navigate in the BIOS settings use the arrow keys on your keyboard. To enter into a menu use the Enter key. To get out of a menu use the Esc key. To change a parameter use the + and - keys.

STANDARD CMOS SETUP Date (mm/dd/yyyy) Time (hh/mm/ss) : Sun Dec 30, 2001 : 03:50:07 Type Size Cyln Head Wpcom User 3229 6256 16 0 User 4311 14848 9 0 Not Installed Not Installed Not Installed 1.44 MB 3 Not Installed Sec 63 63 LBA Mode Off Off BLK Mode On On PIO Mode 4 4 32 Bit Mode On On

Primary Master: -other unit testedPrimary Slave: Secondary Master: Secondary Slave: Floppy Drive A: Floppy Drive B:

Base Memory: Other Memory: Extended Memory: Total Memory:

640Kb 384 Kb 15 Mb 16 Mb

Note: Italics indicates filed that will differ depending on hard drive size and RAM installed.

** NOTE: Be sure to set the Type field for the Primary Master and Secondary Master drives in the drive setup menu above to Auto. This will cause the BIOS to automatically detect any changes in drive status each time the HDR boots up. Use the Auto Detect feature only for troubleshooting to determine whether the motherboard is actually seeing the hard drive. **

ADVANCED CMOS SETUP 1st Boot Device 2nd Boot Device 3rd Boot Device 4th Boot Device Try Other Boot Devices S.M.A.R.T. for Hard Disks Quick Boot Boot Up Num Lock Floppy Drive Swap Floppy Drive Seek PS/2 Mouse Support System Keyboard Primary Display Password Check Wait for F1 If Error Hit DEL Message Display Internal Cache External Cache System BIOS Cacheable C000, 16K Shadow C400, 16K Shadow C800, 16K Shadow CC00, 16K Shadow D000, 16K Shadow D400, 16K Shadow D800, 16K Shadow DC00, 16K Shadow Floppy IDE-0 CD-Rom Disabled Yes Disabled Disabled On Disabled Enabled Auto Absent VGA/EGA Setup Enabled Enabled Enabled Enabled Enabled Cached Cached Disabled Disabled Disabled Disabled Disabled Disabled

ADVANCED CHIPSET SETUP Trend Chip Away Virus DRAM Auto Configuration DRAM Read Burst Timing DRAM Write Burst Timing DRAM Lead Off Timing Fast EDO Read Timing 8bit I/O Recovery Time 16bit I/O Recovery Time OnBoard USB Function USB Function Support System Hardware Monitor Vcore Voltage I/O Voltage +5 Voltage +12 Voltage -12 Voltage -5 Voltage CPU Fan Rate CPU Current Temperature MB Current Temperature System H/W Info. Display Enabled 60ns x2EDO x3FPM x2EDO x2FPM 10/6/3 Disabled 1 Sysclk 1 Sysclk Disabled Disabled Disabled N/A N/A N/A N/A N/A N/A N/A N/A N/A Enabled

POWER MANAGEMENT SETUP Power Management/APM Green Monitor Power State Video Power Down Mode Hard Disk Power Down Mode Standby Time Out (Minute) Suspend Time Out (Minute) Slow Clock Ratio Display Activity Serial Port 1 Serial Port 2 Parallel Port Floppy Disk Primary IDE 0 Primary IDE 1 Secondary IDE 0 Secondary IDE 1 RTC Alarm Power On RTC Alarm Date RTC Alarm Hour RTC Alarm Minute RTC Alarm Second Disabled Stand By Suspend Stand By 10 10 50-62.5% Ignore Monitor Monitor Monitor Monitor Monitor Monitor Monitor Monitor Disabled N/A N/A N/A N/A

PCI / PLUG AND PLAY SETUP Plug and Play Aware O/S PCI VGA Palette Snoop Disabled OffBoard PCI IDE Card Pri. OffBoard PCI IDE IRQ Sec. OffBoard PCI IDE IRQ Assign IRQ to PCI VGA PCI Slot1 IRQ Priority PCI Slot2 IRQ Priority PCI Slot3 IRQ Priority PCI Slot4 IRQ Priority DMA Channel 0 DMA Channel 1 DMA Channel 3 DMA Channel 5 DMA Channel 6 DMA Channel 7 IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ11 IRQ12 IRQ14 IRQ15 Yes Disabled Auto Disabled Disabled No Auto Auto Auto Auto PnP PnP PnP PnP PnP PnP PCI/PnP PCI/PnP PCI/PnP PCI/PnP PCI/PnP PCI/PnP PCI/PnP PCI/PnP PCI/PnP PCI/PnP

PERIPHERAL SETUP OnBoard FDC OnBoard Serial Port1 OnBoard Serial Port2 Serial Port2 Mode IR Duplex Mode OnBoard Parallel Port Parallel Port Mode Parallel Port IRQ Parallel Port DMA OnBoard IDE Enabled 3F8h 2F8h Normal N/A 378 Normal 7 N/A Both

WARNING You cannot damage the D8B by altering the D8B BIOS settings, however if these settings are incorrect, you can render the D8B completely inoperable. Please take care when adjusting your D8B BIOS settings. Mackie Designs Inc. cannot be held responsible for downtime etc caused by incorrect BIOS modifications. If you are not comfortable with these procedures, please contact you local authorized Mackie service center.

Das könnte Ihnen auch gefallen