Beruflich Dokumente
Kultur Dokumente
FEATURES
Non-clogging
The recessed vortex impeller leaves a wide unobstructed passage through the volute in which a strong vortex is created which carries most of the solids. Blockages are hardly possible, even when pumping fibrous materials, as these are pushed away from the radial blade edges and cannot hook onto the impeller.
INSTALLATION OPTIONS
The guide rail quick-release coupling V or the header coupling H which is installed above the water level are used for permanent submerged installation.
F: for semi-permanent free standing installation, including stand and discharge adapter. T: for transportable use. Features a non-overloading impeller.
A: with cooling system designed for permanent dry installation. Features a flood proof motor. For conventional dry installation B, refer to the BW series brochure.
DESIGN FEATURES
Motor: Class F (155C) Bearings: Heavy duty, greased for life. Shaft: Stainless steel Shaft sealing: 2 independent mechanical seals running in biologically degradable oil. At the pump side silicon carbide runs on ceramic, at the motor side carbon ceramic. Oil housing: With flexible rubber bellows. Back vanes: Prevent solids from entering the seal and reduce pressure on the seals, for longer seal life. Impeller: non-clogging with wide passage. No adjustments required: No jamming, consistent high performance over a long period. Bolts and nuts: Stainless steel. Parts: Widely interchangeable, reducing stock requirements. Enables pump construction tailored to customer needs.
NUMEROUS OPTIONS
Single phase motor: For smaller pumps Explosion-proof Motor: Certified to European Standards EN 50014/18/19 Class Eex de IIB T3 or T4. Cooling jacket: For continuous operation with submerged motor or for dry installation. With internal water circulation or for external water connection. Available with seal flushing. Seal leak monitor: Detects water entry in both motor and oil housing. Thermostat: Standard for all explosion-proof designs and for pumps with cooling system. Optional for all other pump types. Special materials: Many components or complete pumps are available in non-standard materials such as bronze, stainless steel or hardened SG cast iron.
TYPICAL APPLICATIONS
Domestic sewage Wastewater treatment plants, pump stations, pressure dewatering, camping areas, restaurants. Raw unscreened municipal sewage, sewage bypasses, heavy and gassy sludges, sludge circulation. Food processing Canning and sugar factories, slaughter houses, breweries, fish industry. Vegetables and potato waste, slaughter wastewater, chicken feathers, rinsing and wash water. General industry Construction, automobile and ship industries, paper mills, steel works, fertilizer factories, rubber and textile industry. Corrosive and abrasive media, cellulose, fertilizer, coal, coke and ore sludges, cooling water, latex, viscous liquids, bilge cleaning. Water control Drainage and irrigation, rain water, water intake, tunnel and cellar drainage, harbor sludge, quarries, percolation water.