Beruflich Dokumente
Kultur Dokumente
Printed circuit mount 10 A relay 1 Pole changeover contacts or 1 Pole normally open contact Miniature - "Sugar cube" package DC coil - 360 mW Wash tight: RT III Cadmium Free contact material option
36.11
36.11-0300
21.5
15.5
2.2 17.5
2.2
1.5 12
1.5
12
0.4 2
1 12.2
0.4
1 12.2
Copper side view Contact specification Contact configuration Rated current/Maximum peak current Rated load AC1 Rated load AC15 (230 V AC) Single phase motor rating (230 V AC) Breaking capacity DC1: 30/110/220 V Minimum switching load Standard contact material Coil specification Nominal voltage (UN) Rated power AC/DC Operating range Holding voltage Must drop-out voltage Technical data Mechanical life AC/DC Electrical life at rated load AC1 Operate/release time cycles cycles ms /10 106 100 103 7/3 4 1,000 40+85 RT III V AC (50/60 Hz) V DC VA (50 Hz)/W AC DC AC/DC AC/DC 3 - 5 - 6 - 9 - 12 - 24 - 48 /0.36 (0.751.5)UN /0.4 UN /0.1 UN A VA VA kW A Rated voltage/Maximum switching voltage V AC 1 CO (SPDT) 10/15 250/250 2,500 500 0.37 10/0.3/0.12 500 (5/100) AgCdO
1 NO (SPST-NO) 10/15 250/250 2,500 500 0.37 10/0.3/0.12 500 (5/100) AgCdO 3 - 5 - 6 - 9 - 12 - 24 - 48 /0.36 (0.751.5)UN /0.4 UN /0.1 UN /10 106 100 103 7/2 4 1,000 40+85 RT III
mW (V/mA)
Insulation between coil and contacts (1.2/50 s) kV Dielectric strength between open contacts V AC Ambient temperature range Environmental protection Approvals (according to type) C
3 6. 1
Series Type 1 = PCB mount No. of poles 1 = 1 pole, 10 A Coil version 9 = DC Coil voltage See coil specifications
1 . 9 . 0 1 2 . 0
0
D: Special versions 0 = Wash tight (RT III) C: Options 0 = None
Selecting features and options: only combinations in the same row are possible. Preferred selections for best avaliability are shown in bold.
Type 36.11 Coil version DC A 0-4 B 0-3 C 0 D 0
Technical data
Insulation Insulation according to EN 61810-1 insulation rated voltage rated impulse withstand voltage pollution degree overvoltage category Insulation between coil and contacts (1.2/50 s) Dielectric strength between open contacts Other data Bounce time: NO/NC Vibration resistance (555)Hz, max. 1 mm: NO/NC Shock resistance Power lost to the environment without contact current with rated current Recommended distance between relays mounted on PCB ms 1/6 (changeover) g 15/15 (changeover) g 16 W 0.4 W 1.4 mm 5 1/ (normally open) 15/ (normally open) V 250 kV 2.5 2 II kV 4 V AC 1,000
Cycles
10
0.2 0.1
10
12
16 (A)
20
60
100
140
180
220
DC voltage (V)
When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of 100103 can be expected. In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased.
Coil specifications
DC coil data Nominal voltage UN V 3 5 6 9 12 24 48 Coil code Operating range Umin V 2.2 3.7 4.5 6.7 9 18 36 Umax V 4.5 7.5 9 13.5 18 36 72 Resistance Rated coil consumption R I at UN mA 25 120 70 72 100 60 225 40 400 30 1,600 15 6,400 7.5 R 36 - DC coil operating range v ambient temperature U 3.0 UN
2.5 2.0 1.5 1.0 0.5 -20 0 20 40 60 80 (C)
1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature.