Beruflich Dokumente
Kultur Dokumente
Selection Guide
4Q 2006
Boomer Subsystems ............. 4-5 Mono Boomer Audio Amplifiers ................................. 6-7 Integrated Boomer Amplifiers ................................. 8-9 Stereo Boomer Audio Amplifiers ................................... 10 Class D Audio Amplifiers ......... 11 Headphone Amplifiers ........ 12-13 Boosted Boomer Drivers .... 14-15 Boomer and Overture Audio Power Amplifiers .... 16-17 Amplifiers for Microphones .... 18 Performance Audio ................... 19 Choosing a Power Amp ...... 20-21 Audio Products .......................... 22 Design Tools ............................... 23 Packaging ................................... 24
If it sings or rings, beeps or buzzes, talks or squawks, National Semiconductor is making it easier than ever to design better, richer sound. National brings its more than 30 years of audio design expertise to a broad range of products in its Boomer and Overture lines - from 10 mW to more than 500W, from 0.9V to 200V. Boomer audio amplifiers enhance and enrich the entire range of sound from music and sound effects to voice and ring tones. National manufactures Class AB and Class D amplifiers and audio subsystems for speakers, headphones, and ceramic and piezoelectric speakers. Nationals new high-performance series brings dramatically improved sound quality to high-fidelity consumer, professional audio equipment, as well as prosumer distributed audio and musical instruments. This selection guides new format will help you more easily find the right products for your audio application. We have added more detailed device descriptions to assist you in identifying the differences between similar devices, and a section on the best way to choose a power amplifier, including example curves.
Contents
Boomer Subsystems
Audio Subsystems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Headphone Amplifiers
Headphone Boomers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Ground Reference Headphone Boomers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Performance Audio
Stereo High-Fidelity Amp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Audio Operational Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Audio Products
High-Power Audio Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Audio Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Audio Synchronized LED Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Design Tools
Online Design Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
audio.national.com
Boomer Subsystems
Audio Subsystems
Product ID LM4844 LM4845 LM4846 LM4851 LM4852 LM4855 LM4856 LM4857 LM4859 LM4888 LM4930 LM4931 LM4934 LM4935 LM4946
New New
Description 1.2W stereo speaker 80 mW headphone Boomer with I2C volume and mode control, National 3D and selectable OCL HP output 1.15W mono speaker 75 mW headphone Boomer with I2C/SPI volume and mode control, programmable National 3D and selectable OCL HP output 1.15W mono speaker 75 mW headphone Boomer with I2C/SPI volume and mode control, programmable National 3D and selectable OCL HP output 1.1W mono speaker 115 mW differential headphone Boomer with SPI control 1.1W mono speaker 60 mW headphone Boomer with I2C control 1.1W mono speaker 115 mW differential headphone Boomer with SPI control 1.1W mono speaker 60 mW headphone Boomer with I2C control 1.2W stereo speaker, 75 mW headphone, 135 mW earpiece Boomer and line out with I2C mode and volume control and National 3D 1.2W stereo speaker, 75 mW headphone, with I2C mode and volume control and National 3D 1.3W stereo speaker, 90 mW headphone Boomer with National 3D 1W mono speaker 27 mW headphone Boomer with microphone pre-amp, headphone sense, PCM and I2S 1.1W mono speaker 26 mW headphone Boomer with microphone pre-amp, GPIO, headphone sense, I2C/SPI control, PCM and I2S 1.2W stereo speaker 80 mW OCL headphone 175 mW earpiece Boomer with line out, I2C/SPI control, I2S and National 3D 1.3W mono speaker 33 mW headphone 115 mW earpiece Boomer with and auxiliary inputs, control, mic preamp, DC volume control and AGC 1.3W mono speaker, 85 mW headphone Boomer with I2C/SPI mode and volume control, National 3D and selectable OCL output 1.19W mono speaker, 87 mW headphone Boomer with I2C mode and volume control, National 3D and selectable OCL output 1.19W stereo speaker, 89 mW headphone Boomer with I2C mode and volume control and selectable OCL output I2S/PCM I2C
LM4947 LM4949
Audio Input
CIN CIN
MIN+ MIN-
LLS+ 0 dB to +6 dB LLS-
Audio Input
CIN CIN
LIN+ LIN-
Audio Input
CIN CIN
RIN+ RINBYPASS
0 dB to +6 dB Right Input -59 dB to +18 dB Bias Click/Pop Suppression Mixer and Mode Select -12 dB to -0 dB
Key Applications
Mobile phones PDAs Laptops
12CVDD
CB 12CVDD
HPR
12C Bus
SDA SCL
VIL
Digital Volume Control National 3D Capless HP Min (dB) -40.5 -54 -54 -40.5 -40.5 -40.5 -40.5 -40.5 -40.5 -46.5 -46.5 -56 -46.5 -54 -59.5 -59 Max (dB) 6 18 18 6 6 6 6 6 6 5 12 18 18 18 Typ Speaker Output/Ch at 5V, 8 (W) 1.2 x 2 1.1 1.1 1 1.1 1 1.1 1.2 x 2 1.2 x 2 2.1 x 2 1 1 1.2 1.2 1.3 1.19 1.16 Typ Headphone Output at 5V, 32 (mW) 75 60 60 100 60 100 60 75 75 90 27 27 80 33 85 87 86 Control Bus Interface I2C I2C/SPI I2C/SPI SPI I2C SPI I2C I2C I2C I2C I2C/SPI I2C/SPI I2C/SPI I2C/SPI I2C I2C Output Modes 16 8 8 8 8 8 8 16 16 11 11 8* >1000 8 8 >100 Packaging micro SMD-30 micro SMD-25 micro SMD-25 LLP-24, micro SMD-18 LLP-24, micro SMD-18 LLP-24, micro SMD-18 LLP-24, micro SMD-18 LLP-28, micro SMD-30 LLP-28, micro SMD-30 LLP-24 LLP-44, micro SMD-36 micro SMD-42 micro SMDxt-42 micro SMDxt-49 LLP-24 micro SMD-25 micro SMD-25
AB
AB
16
D
AMP Bias and DET
ADC
32 AB
G7.11
Level Shifters
6~-40 dB
AB
VGND
32
LM4935 Features
570 mW Class D mono amplifier for speakers and ringtones 2 Microphone inputs Integrated codec for voice RF radio module input and output Volume controls for all 5 analog inputs Bidirectional I2S includes PCM interface capability Capless headphone capabilities Space-saving micro SMDxt-49 packaging audio.national.com
AUX_L
AB
Mic Mix AB
RF Voice Module
Key Applications
Multi-media smart phones Mobile phones PDAs Portable gaming Portable DVD players Digital cameras 5
0.4 m
New m
VCC = 3.3V 4 (W) 0.141, 2 0.75 0.9 0.8 0.8 0.13 0.25 0.25 0.6 0.6 0.5 0.6 0.6 0.7 0.7 8 (W) 0.21 0.5 0.5 0.5 0.5 0.5 0.35 0.11 0.4 0.4 0.4 0.35 0.35 0.27 0.4 0.265 0.43 0.43 0.4 0.4 0.42 0.28 0.4 0.43 0.3 0.5 0.22 0.5 0.5
7Refer
VCC = 5V 4 (W) 0.633 2 1.7 0.35 1.6 2.03 2.13 1.55 1.55 8 (W) 0.723 1.2 1.18 1.1 1.1 1 1.1 0.27 1 1 0.9 1.1 1.1 0.6 1 0.675 1.07 1.07 1.07 1 1.07 0.9 1.2 1.25 1.1 1.3 0.68 1.15 1.15
Product ID LM4864 LM4871 LM4872 LM4876 LM4877 LM4878 LM4879 LM4882 LM4889 LM4890 LM4891 LM4893 LM4897 LM4900 LM4901 LM4902 LM4903 LM4904 LM4905 LM4906 LM4907 LM4951 LM4954 LM4990 LM4991 LM4995 LM4862 LM4861 LM4860
3V
Description 725 mW Boomer 3W (into 3) Boomer 1W Boomer with shutdown high 1.1W Boomer with shutdown low 1W Boomer with shutdown low 1W Boomer with shutdown low, internal pulldown resistor 1.1W Boomer with shutdown low 270 mW single ended Boomer 1W Boomer with shutdown low and improved THD 1W Boomer with shutdown low and improved specification limits 1W Boomer with shutdown high 1.1W Boomer with shutdown low 1.1W Boomer with fade in/fade out 675 mW Boomer with shutdown high 1.6W Boomer with selectable shutdown 675 mW Boomer with shutdown low 1W Boomer. High performance at low voltage 1W Boomer with shutdown high 1W Boomer with shutdown low for 8 loads 1W Boomer with no bypass cap, selectable gain 1W Boomer with shutdown low for 8 loads 1.8W (at 7.5V) wide voltage range Boomer 3W (into 3) wide voltage range Boomer 2W (into 4) Boomer with selectable shutdown 3W (into 3) Boomer 1.3W Boomer 500 mW Boomer 1W Boomer 1W Boomer with HP control and HP sense
2R L=
0.4 m
New m
1V = S
166
3LLP
package
4Shutdown
mode select
5V
1.5V
6V
S=
3.3V
Output Power at THD 10% VCC = 3.3V 4 (W) 0.6 0.8 8 (W) 0.55 0.55 0.45 0.6 0.59 0.65 1.6 1.6 23 2.5 VCC = 5V 4 (W) 8 (W) 1.1 1.1 1.3 1.4 1.6 1.6
Typical THD Ratings (%, PO = W at VS = 5V, RL = 8 unless otherwise specified) 0.1 (0.4) 0.1 (0.4) 0.05 (0.4) 0.02 (0.04) 0.03 (1) 0.04 (0.7)
Packaging micro SMD-9 LLP-10, micro SMD-9, MSOP-10 LLP-10, micro SMD-9, MSOP-10 LLP-8 LLP-8 micro SMD-9 (0.4 mm pitch)7
Output Power at THD 10% VCC = 3.3V 4 (W) 0.262 1 1.1 0.9 0.9 0.16 0.32 0.35 0.35 0.8 0.8 0.8 0.8 0.8 8 (W) 0.34 0.6 0.7 0.6 0.6 0.7 0.42 0.13 0.53 0.55 0.55 0.42 0.5 0.36 0.5 0.37 0.6 0.6 0.55 0.4 0.55 0.55 0.5 0.5 0.6 0.28 0.6 0.6 4 (W) 0.72 2.5 2.15 0.43 2 2.53 2.53 1.9 1.9 VCC = 5V 8 (W) 0.85 1.5 1.5 1.5 1.5 1.5 1.2 0.33 1.01 1.1 1.1 1.3 1.3 0.8 1.3 1 1.3 1.3 1.2 1.2 1.3 1.2 1.5 1.5 1.5 1.6 0.83 1.45 1.45 Typical THD Ratings (%, PO = W at VS = 5V, RL = 8 unless otherwise specified) 0.09 (0.3) 0.25 (1) 0.1 (0.25) 0.2 (1) 0.1 (0.25) 0.1 (0.25) 0.1 (0.4) 0.03 (0.2) 0.1 (0.4) 0.1 (0.4) 0.1 (0.4) 0.1 (0.4) 0.1 (0.4) 0.4 (0.4) 0.2 (0.5) 0.4 (0.4) 0.2 (0.5) 0.2 (0.5) 0.2 (0.5) 0.2 (0.4) 0.2 (0.5) 0.07 (0.1)6 0.1 (0.6) 0.2 (0.5) 0.2 (0.5) 0.1 (0.5) 0.5 (0.4) 0.45 (0.5) 0.72 (1)
Shutdown High High High Low Low Low Low High Low Low High Low Low High High/low4 Low Low High Low Low Low Low Low High/low4 High Low High High High
Packaging LLP-10, SOIC-8, MSOP-8 LLP-8, SOIC-8 micro SMD-8 SOIC-8, MSOP-10 micro SMD-8 micro SMD-8 LLP-8, micro SMD-8, micro SMD-9, MSOP-10 SOIC-8, MSOP-8 LLP-10, micro SMD-8, SOIC-8, MSOP-8 micro SMD-8, SOIC-8, MSOP-8, LLP-10 micro SMD-8, SOIC-8, MSOP-8 micro SMD-9, SOIC-8, MSOP-10 MSOP-10 MSOP-8 MSOP-10, LLP-10 LLP-8, MSOP-8 MSOP-8 micro SMD-8 LLP-8, MSOP-8 LLP-10, MSOP-8 LLP-8 micro SMD-9, LLP-10 micro SMD-9 LLP-10, micro SMD-9, MSOP-8, TSSOP-10 LLP-8, SOIC-8 micro SMD-9 (0.4 mm pitch)7 SOIC-8 SOIC-8 SOIC-16
audio.national.com
Description 350 mW Mono headphone or speaker Boomer 350 mW Mono headphone or speaker Boomer 75 mW Headphone and 1.75W speaker Boomer with DC volume control and microphone preamp 1.5W mono speaker or 95 mW stereo headphone Boomer with HP sense 1.5W mono speaker or 95 mW stereo headphone Boomer with HP sense and improved shutdown current 1.7W mono speaker or 93 mW stereo headphone Boomer with SE stereo and mono inputs, input mux and OCL HP outputs 1.5W mono speaker or 95 mW stereo headphone Boomer with HP mode detect 750 mW mono speaker or 80 mW mono headphone Boomer with DC volume control and HP sense 750 mW mono speaker or 80 mW mono headphone Boomer with precision DC volume control and HP sense 1W Mono speaker or 90 mW stereo headphone Boomer with HP sense 2W mono speaker or 90 mW stereo headphone Boomer with SE stereo and mono inputs 1W mono speaker or 85 mW stereo headphone Boomer with SE stereo inputs 1-cell mono speaker or stereo single ended HP Boomer 1-cell mono speaker or stereo single ended HP Boomer 2-cell mono speaker or stereo single ended HP Boomer
2R L= 16 3LLP
Supply Voltage Range (V) 2.0 to 5.5 2.0 to 5.5 4.5 to 5.5 2.4 to 5.5 2.4 to 5.5 2.4 to 5.5 2.4 to 5.5 2.7 to 5.5 2.7 to 5.5 2.2 to 5.5 2.5 to 5.5 2.5 to 5.5 0.9 to 2.5 0.9 to 2.5 1.5 to 3.6
Output Power at THD 1% VCC = 5V VCC = 3.3V 4 (W) 0.6 11 0.661 8 (W) 0.061 0.07 0.44 0.44 0.38* 0.44 0.27 0.27 0.4 0.41 0.51 0.085 at 1.5V 0.09 at 1.5V 0.41 32 (W) 0.0731 0.0871 0.04 0.04 0.0321 0.04 0.04 0.04 0.035 0.0371 0.0321 0.008 at 1.5V 0.008 at 1.5V 0.0261 4 (W) 1.75 1.5 1.5 1.7 1.7 2 8 (W) 0.24 0.25 1.1 1.1 1.1 1.1 1.1 0.75 0.75 0.9 1.1 1 0.17 at 2V 32 (W) 0.23 0.24 0.095 0.095 0.095 0.093 0.095 0.08 0.08 0.09 0.09 0.085
package
4Shutdown
mode select
5V
S= 1.5V
6V
S= 3.3V
*Selected packages These devices contain stereo speaker amplifiers, unless otherwise indicated.
Output Power at THD 10% VCC = 5V VCC = 3.3V 4 (W) 1.11 0.81 8 (W) 0.91 0.091 0.6 0.6 0.531 0.6 0.37 0.37 0.55 0.521 0.621 0.1 at 1.5V 0.12 at 1.5V 0.531 32 (W) 0.11 0.0931 0.05 0.05 0.061 0.048 0.048 0.05 0.041 0.0421 0.01 at 1.5V 0.01 at 1.5V 0.0331 4 (W) 2.1 1.8 1.8 2.1 2.5 2.25 8 (W) 0.3 0.3 1.5 1.5 1.5 1.3 1.5 1 1 1.1 1.5 1.45 0.21 at 2V 32 (W) 0.3 0.3 0.095 0.11 0.11 0.105 0.11 0.11 0.11 0.09
Typical THD Ratings (%, PO = W at VS = 5V, RL = 8W unless otherwise specified) 0.15 (0.27)2 0.15 (0.27)2 0.3 (1) 0.1 (1) 0.1 (1) 0.18 (0.4) 0.1 (1) 0.6 (0.3) 0.6 (0.3) 0.1 (0.4) 0.2 (1.1) 0.33 (1) 0.1 (0.025)5 0.2 (0.025)5 0.1 (0.3)1
Shutdown High High High High High Low High High Low Low High High Low Low Low
Packaging SOIC-8 SOIC-8, MSOP-8 TSSOP-28 LLP-14, MSOP-10, TSSOP-14 LLP-14, MSOP-10 LLP-14, micro SMD-12, TSSOP-14 LLP-14, MSOP-10 micro SMD-8, SOIC-8, MSOP-8 SOIC-8, MSOP-8 micro SMD-8, SOIC-8, MSOP-8, LLP-10 MSOP-8, TSSOP-10 TSSOP-10 LLP-10, MSOP-10 MSOP-10 LLP-10, MSOP-10
Supply Voltage Range (V) 4.5 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.0 to 5.5 2.0 to 5.5 2.0 to 5.5 2.0 to 5.5 2.4 to 5.5 2.7 to 5.5 2.7 to 5.5
Output Power THD 1%,VCC = 5V 4 (W) 8 (W) 32 (W) 0.33 2.0* 2.0* 2.0* 2.0* 2.0* 2.0* 2.0* 2.0* 2.2 1.9 1.9 2.1 2.1 2 2 0.25 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.3 1.25 1.3 0.085 0.085 0.085 0.085 0.085 0.085 0.085 0.085 0.09 0.088 0.088 0.09 0.095 0.09 0.092
Output Power THD 10%, VCC = 5V 4 (W) 8 (W) 32 (W) 0.42 2.25* 2.25* 2.25* 2.25* 2.25* 2.25* 2.25* 2.5* 2.7 2.6 2.6 2.6 2.5 2.5 2.4 0.33 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.7 1.6 1.5 0.095 0.095 0.095 0.095 0.095 0.095 0.095 0.095 0.11 0.114 0.114 0.11 0.11 0.11 0.11
Typical THD Ratings (%, PO = W at VS = 5V, RL = 8W unless otherwise specified) 0.15 (0.2) 0.3 (1) 0.3 (1) 0.3 (1) 0.3 (1) 0.3 (1) 0.3 (1) 0.3 (1) 0.2 (1) 0.3 (1) 0.3 (1) 0.3 (1) 0.3 (1) 0.1 (1) 0.06 (0.4) 0.05 (0.4)
Shutdown High High High High High High High High High High High High High High I2C High
Packaging DIP-28, SOIC-28, TSSOP-28 LLP-28, TSSOP-28 LLP-28, TSSOP-28 LLP-28, micro SMD-36, TSSOP-28 LLP-28, TSSOP-28 LLP-28, TSSOP-28 LLP-28, TSSOP-28 LLP-28, TSSOP-28 TSSOP-28 LLP-24, DIP-16, SOIC-16, TSSOP-20 LLP-24, TSSOP-20 LLP-24, TSSOP-20 LLP-24, micro SMD-20, TSSOP-20, TSSOP-28 LLP-24 TSSOP-28 TSSOP-28
audio.national.com
Description 1.1W stereo Boomer with adjustable LDO 1.1W stereo Boomer with adjustable output limiter 1.1W stereo Boomer with adjustable LDO and adjustable output limiter 1.1W stereo Boomer with 32-step DC volume control 2.2W stereo Boomer 1.2W stereo Boomer with differential input and selectable gain 1.2W stereo Boomer with differential input selectable gain and varying feedback resistance network 1.2W stereo Boomer with differential input selectable gain and varying feedback resistance network and RF suppression 1.1W stereo Boomer with 32-step AGC controlled volume 1.2W stereo fully differential Boomer with RF suppression 1.07 stereo Boomer with independent channel shutdown
Supply Voltage Range (V) 3.0 to 5.5 3.0 to 5.5 3.0 to 5.5 2.7 to 5.5 2.0 to 5.5 3.0 to 5.5 3.0 to 5.5
Shutdown High High High (Audio), low (LDO) High High High High
LM4884 LM4918
New
1.9 1.8
2.6 2.2
LM4928 LM4992
*Selected packages
-L Input
-IN
Common Mode
V02+ RL 8 V01-
+L Input
-R Input
Common Mode
V02+ RL 8 V01-
Key Applications
Mobile phones PDAs Portable electronic devices and accessories
+R Input +IN GND
10
Mono/ Stereo Stereo Mono Mono Stereo Mono Mono Mono Mono Stereo Mono
Output Power THD 1% 4 (W) 2.1 1 1.1 1.2* 2.21* 2.15 1.9 2.2 8 (W) 1.2 425 mW* 0.6 450 mW 0.6 1.19 1.24 1.25 1.3
Output Power THD 10% 4 (W) 2.7 2.4 2.9 1.5* 2.5 2.65 2.5 2.7 8 (W) 1.5 550 mW* 1.5 550 mW 1.6 1.7 1.7 1.5 1.6
Typical THD Ratings (%) 0.20 0.35 0.40 0.65 0.35 0.30 0.09 0.03 0.05 0.03
THD Measurement Conditions (W at VS = 3V, RL = 8 unless otherwise specified) PO = 1 at VS = 20V, RL = 4 PO = 0.1* PO = 0.1* PO = 0.1* PO = 0.1* PO = 0.5 at VS = 3.6V* PO = 0.1* PO = 0.1 at VS = 5V* PO = 0.3 at VS = 3.6V PO = 0.1 at VS = 5V*
Supply Voltage Range (V) 4.5 to 5.5 2.7 to 5.5 2.7 to 5.5 2.8 to 5.5 2.7 to 5.5 2.4 to 5.5 2.4 to 5.5 2.4 to 5.5 2.4 to 5.5 2.4 to 5.5
Shutdown High Low High/low Low Low Low Low Low Low Low
Packaging TSSOP-24 micro SMD-9 MSOP-10, micro SMD-8 LLP-14 MSOP-10, micro SMD-9 LLP-8, micro SMD-9 micro SMD-9 micro SMD-9, (0.4 mm pitch)1, LLP-8 micro SMD-16 micro SMD-9, LLP-8
New
*15 H + RL + 15 H
Input
Ri
VDD -IN +
PVDD
PWM Modulation
Key Applications
Mobile phones PDAs Portable electronic devices
Shutdown Control
Shutdown
Bias Circuit
audio.national.com
11
Headphone Amplifiers
Headphone Boomers
Product ID LM4808 LM4809 LM4810 LM4811 LM4880 LM4881 LM49081 LM4910 LM4911 LM4912 LM4915 LM4921 LM4924 LM4929
New
Description 105 mW Headphone Boomer. Can drive 8 105 mW Headphone Boomer with shutdown low. Can drive 8 105 mW headphone Boomer with shutdown high. Can drive 8 105 mW headphone Boomer with up/down volume control. Can drive 8 85 mW headphone Boomer, 0.1% THD+N. Can drive 8 85 mW headphone Boomer, 0.1% THD+N. Can drive 8 120 mW headphone Boomer, 0.1% THD+N. 35 mW headphone Boomer. Bypass capacitor-less 40 mW headphone Boomer. Low noise, selectable cap-coupled/OCL output 40 mW headphone Boomer. Low noise, with mute 280 mW Mono headphone Boomer. Pseudo-differential, fixed gain 50 mW headphone Boomer. Low voltage, 16-bit I2S DAC, SPI control 40 mW 2-cell headphone Boomer 40 mW headphone Boomer with low noise and OCL output 135 mW headphone Boomer with OCL or cap-coupled output, 32-step I2C volume control
2Mute 3Refer
Exposed -DAP
Capless HP
Supply Voltage Range (V) 2.0 to 5.5 2.0 to 5.5 2.0 to 5.5 2.0 to 5.5 2.7 to 5.5 2.7 to 5.5 2.0 to 5.5 2.2 to 5.5 1.8 to 5.5 2.0 to 5.5 2.2 to 5.5 2.6 to 5.0 1.5 to 3.6 2.0 to 5.5 2.3 to 5.5, I2C 1.7 to 5.5
LM4985
110
kV ESD Rated
New
Typical Application
Volume Control Mux
+ + +
OUT1
BYPASS
Bias Generator
CNTGND
IN2
Volume Control
Mux
OUT2
Key Applications
Mobile phones PDAs Portable electronic devices MP3 players
SDA SCL 2CV I DD ADR
VDD GND
12
Typical THD Ratings (%) 0.1 0.1 0.1 0.1 0.02 0.02 0.1 0.3 0.04 0.3 0.05 0.1 0.1 0.05 0.03
THD Measurement Conditions (mW) PO = 105 at VS = 5V, RL = 16 PO = 105 at VS = 5V, RLL = 16 PO = 105 at VS = 5V, RL = 16 PO = 105 at VS = 5V, RL = 16 PO = 75 at VS = 5V, RL = 32 PO = 75 at VS = 5V, RL = 32 PO = 120 at VS = 5V, RL = 16 PO = 25 at VS = 3V, RL = 32 PO = 30 at VS = 3V, RL = 16 PO = 30 at VS = 3V, RL = 32 PO = 100 at VS = 3V, RL = 16 PO = 12 at VS = 5V, RL = 32 PO = 10 at VS = 3V, RL = 16W PO = 20 at VS = 3V, RL = 16W PO = 38 at VS = 3.6V, RL = 32W
Shutdown Low High High High High Low Low2 Low2 Low High Low2 Low I2C
Packaging LLP-8, SOIC-8, MSOP-8 LLP-8, SOIC-8, MSOP-8 LLP-8, MSOP-8 LLP-10, MSOP-10 DIP-8, SOIC-8 DIP-8, SOIC-8, MSOP-8 LLP-8, SOIC-8, MSOP-8 LLP-8, SOIC-8, MSOP-8 LLP-10, MSOP-10 MSOP-10 LLP-8 micro SMD-20 LLP-10, MSOP-10 MSOP-10 micro SMD-12 (0.4 mm pitch)3
16 (mW) 60 55
32 (mW) 70 70
THD Measurement Conditions (mW) PO = 50 at VS = 3V, RL = 32 PO = 50 at VS = 3V, RL = 32W, Single channel PO = 50 at VS = 3V, RL = 32, Single channel PO = 50 at VS = 3V, RL = 32W, Single channel
LM4920 Boomer Ground-Referenced, Ultra Low Noise, Mixed Gain, 80 mW Stereo Headphone Amplifier
Features
Fixed logic levels Ground referenced outputs High PSRR Ultra low current shutdown mode Improved pop-and-click circuitry eliminates noises during turn-on and turn-off transitions No output coupling capacitors, snubber networks, bootstrap capacitors, or gain-setting resistors required Shutdown either channel independently Available in space-saving micro SMD-14 packaging Typical Application
CPVDD C3 D1 0.39 F + Ci A3 30 k C1 B2 B1 20 k Ri + 4.7 F C4 0.1 F Ceramic
VIN1
Rf D2 Headphone Jack
SD_LC SD_LC
A4 C1 2.2 F 0.39 F + Ci C4 A1 20 k Ri
Key Applications
+ 30 k Rf
C2
Mobile phones MP3 players PDAs Portable electronic devices Notebook PCs
VIN2
D4 C2 2.2 F D3 B4
A2
audio.national.com
13
Description 12 Vp-p Boosted ceramic speaker driver 12.6 Vp-p ceramic speaker driver with ground reference, ultra low noise, fixed gain 24 Vp-p Piezoelectric speaker driver 15 Vp-p ceramic speaker driver 15 Vp-p ceramic speaker driver with band switch function. Can drive LM4951 for stereo solution
Supply Voltage Range (V) 2.7 to 5.5 1.6 to 4.2 3.0 to 7.0 3.0 to 5.0 3.0 to 5.0
Output Voltage at THD 1% (VP-P) VCC = 3V 800 nF + 20 24 2 F + 30 12 10.2 15 15 at 3.2V* 24 VCC = 5V 800 nF + 20 2 F + 30 12 at 4.2V 15 15*
LM4962
*ZL = 2 F + 9.4 Audio eBook resources available online. See page 17 for more audio design tutorials.
LM4804/05 Boomer Audio Amplifiers Provide High Power All Day, All Night
Features
Single chip solution Short circuit protection (LM4804) Constant 1W high-output power (LM4805) Constant 1.8W mono BTL output, RL = 8, VDD = 3V (LM4804) Low, 11 mA quiescent current ,RL = 8, VDD = 4.2V (typ) (LM4804) Low, 14 mA (typ) quiescent current (LM4805) Pop and click circuitry eliminates noise during turn-on and turn-off transitions Low, 2 A (max) shutdown current Unity-gain stable External gain configuration capability Cell phones Smart phones Personal media devices Handheld portable devices LM4804 Typical Application
L1 Cs1 4.7 F C3 4.7 pF 4.7 H 5 3 25 7 D1 Cf1 470 pF V1=VFB (1 + R1/R2) Co 100 F
Bat VDD
R3 150k
R1 301k
SW FB
28 R2 78.7k 6
26 S/D 27
10 H
LM4804
18 19 Cb 1.0 F 12
0.1 F
S/D2 Bypass
V1
22
GND3
14
Cs2 4.7 F
Key Applications
Audio In 0.1 F Ci 20k Ri
+IN
VO2
11 8
-IN
Rf 200k
VO1
14
Output Power at THD 10% VCC = 3.3V 4 (W) 2.1 1.65 8 (W) 4 (W) VCC = 5V 8 (W) 2.2 at 4.2V 1.65 at 4.2V
Typical THD Ratings (%, PO = W at VS = 5V, RL = 8W unless otherwise specified) 0.15 (1.5W)1 0.25 (0.5W)1
Output Voltage at THD 10% (VP-P) VCC = 3V 800 nF + 20 27 2 F + 30 13 17 17 at 3.2V* 27 VCC = 5V 800 nF + 20 2 F + 30 13 at 4.2V 17 17* Typical THD Ratings (%) 0.05 0.02 0.04 0.1 0.4 THD Measurement Conditions VOUT = 10 VP-P at VS = 3V VOUT = 8.5 VP-P at VS = 3V VOUT = 3 VRMS at VS = 3V VOUT = 14 VP-P at VS = 3.2V VOUT = 14 VP-P at VS = 3.2V Shutdown Low Low Low Low Low Packaging LLP-28 LLP-14 LLP-28 LLP-28 micro SMD-20
TypicalL1Application
10 H D2 V1 = 1.2 (1+R2/R5) R3 1.6k R2 25k C2 4.7 F
Css 10 nF
LM4962
SW-Leak Bootstrap
Flagout
Flagout
RS 100m C S2 4.7 F
SD Boost SD Amp Bypass Vo1 Ro2 4.7 Vo2 VIN RinA 20k BW1 BW2 Load Ceramic Speaker 2.0 F GND To LM4951 for stereo solution Ro1 4.7
Cchg
Key Applications
Smart phones Mobile phones and multimedia terminals PDAs, internet appliances, and portable gaming Portable DVD Digital still cameras/camcorders
CinA 0.1 F
Rf1 200k
Rf2 20k
Cf1 82 pF
audio.national.com
15
*Learn more about Overture and SPiKe protection at audio.national.com. Application Notes: AN-1192 and AN-898
16
Output Power at THD 10% VCC = 12V 4 (W) 4.2 3.8 3.8 8 (W) 2.5 7.5 4 (W) 7.9 5.5 VCC = 16V 8 (W) 4.4 12 Typical THD Ratings (%) 0.15 0.05 0.08 THD Measurement Conditions (W at VS = 12V) PO = 1, RL = 4 PO = 2.5, RL = 4 PO = 2, RL = 4 Shutdown Low Low Low Packaging TO263-9 TO220-9, TO263-9 TO263-9
Output Power at THD 10% VCC = 12V 4 (W) 0.35 1.75 2.8 2.2 8 (W) 0.8 1.3 1.8 5 2.5 5 5 5.7 VCC = 16V 4 (W) 8 (W) 0.8 1.75 3.5 3 Typical THD Ratings (%) 0.25 0.06 0.05 0.05 0.40
THD Measurement Conditions (W, RL = 8 ) PO = 0.125 at VS = 6V PO = 1 at Vs = 14V PO = 4.5 at VS = 24V PO = 4.5 at VS = 24V PO = 1 at VS = 22V
Packaging DIP-8, SOIC-8, MSOP-8 DIP-14, SOIC-14 TO220-7, TO263-7 TO220-9, TO263-9 TO220-15
Typical THD Ratings (%) 0.08 0.06 0.06 0.06 0.03 0.08 0.08 0.08 0.06 0.03 0.02 0.02
THD Measurement Conditions (W and RL = 8 unless otherwise specified) PO = 15 at VS = 22V PO = 25 at VS = 30V PO = 40 at VS = 35V PO = 40 at VS = 35V PO = 60 at VS = 28V, RL = 4 PO = 30 at VS = 28V PO = 30 at VS = 28V PO = 30 at VS = 28V PO = 30 at VS = 30V PO = 60 at VS = 35V, RL = 4 PO = 20 at VS = 28V PO = 20 at VS = 25V
Mute/Shutdown Mute and Standby Mute Mute Mute Mute Mute and Standby Mute and Standby Mute and Standby Mute Mute Mute Mute and Standby
Packaging TO220-15 (TA), TO220-15 (TF) TO220-11 (TA), TO220-11 (TF) TO220-11 (TA), TO220-11 (TF) TO220-11 (TA), TO220-11 (TF) TO220-11 (TA), TO220-11 (TF) TO220-11 (TA), TO220-11 (TF) TO220-11 (TA), TO220-11 (TF) TO220-9 (TA) TO220-15 (TA), TO220-15 (TF) TO220-27 (TA), TO220-27 (TF) TO220-27 (TA) TO220-27 (TA)
audio.national.com
17
Application 4-wire PDM preamp 4-wire PDM preamp 3-wire Electret 3-wire Electret 3-wire Electret 3-wire Electret 1V Bias 2-wire high-gain 2-wire high-gain 2-wire high-gain 2-wire high-gain 2-wire high-gain 2-wire high-gain
11.8V,
THD (% at VIN = 18 mVP-P, VDD = 5V) 0.03 0.03 0.11 0.0013 0.35 0.181 0.13 0.21 0.10 0.09 0.12 0.15
4Thinnest
Typ IS/Ch ( A) < 518 < 518 < 60 < 60 < 60 < 72 < 180 < 180 < 180 < 180 < 180 < 180
Packaging micro SMD-6 (LDB*) micro SMD-6 (LDB*) micro SMD-4 micro SMD-4 micro SMD-4 micro SMD-4 (LDB*) micro SMD (LDB*) XP4 micro SMD (LDB*) XP4 micro SMD-4 micro SMD-4 micro SMD-4 micro SMD-4 (UP/XP)4
pending
Output Right
3PDM
Output Left
Built-in gain
1 x 1 x 0.5 mm Thin
18
Performance Audio
Performance Audio
Product ID LM4702 Description Stereo high-fidelity audio power amplifier driver Supply Voltage (V) 75 Typical THD Ratings (%) 0.005 THD Measurement Conditions AV = 30 dB, VOUT = 14 VRMS at 1 kHz PSRR (dB) 110 Supply Voltage Range (V) 20 to 75 Mute/ Shutdown Mute Packaging TO220-15
*Learn more about Overture and SPiKe protection at audio.national.com. Application Notes: AN-1192 and AN-898
Description Dual audio amplifier Quad audio amplifier Quad wide bandwidth JFET Dual wide bandwidth JFET Single low-offset, low-drift JFET Dual LF411 Quad low-power JFET Dual high-performance, high-fidelity audio op-amp
GBWP (MHz) 15 25 4 4 3 3 1 53
PSRR (dB) 100 100 100 100 100 100 100 120
Packaging DIP-8, SOIC-8, MSOP-8 DIP-14, SOIC-14 DIP-14, SOIC-14 DIP-14, SOIC-14 DIP-8 DIP-8 DIP-14, SOIC-14 DIP-8, MSOP-8, TO99-8
LM4562
Typical Application
150 3320
LM4562
10 pF
LM4562
3.83 k + 100 22 nF//4.7 nF//500 pF
OUTPUT
47 K
Key Applications
Ultra-high quality audio amplification High-fidelity pre-amplifiers and high-fidelity multimedia State-of-the-art phono pre-amps High-performance professional audio High-fidelity equalization and crossover networks High-performance line drivers and line receivers High fidelity active filters
audio.national.com
19
20
The output power obtained from one IC with a 10% THD specification will not be competitive with another amplifier whose power is the same, but whose THD is lower. For a given supply voltage load, two audio amplifiers can only be compared on equal footings if their THD specifications are equivalent. The amplifier whose power is the same, but has a lower THD, will generally be more expensive. This is partly because the output stage needs to be larger to support more current drive capability. This makes the device more expensive to produce and thus translates into a higher end cost for the customer.
In summary, it should be remembered when selecting an audio IC that any power rating has a corresponding THD specification which is based on a given voltage supply and load. Most consumer applications require clean crisp music as opposed to the harsh sound of clipping, so beware of those 10% distortion ratings and make sure that your comparisons are apples to apples. In support of the above information, this audio selection guide is set up to allow easy selection of parts based on supply voltage range, load impedance, and most importantly, power with respect to THD level.
Figure 1:
-20 -40 -60 -80 -100 -120 -140 -160 0 2k 4k 6k 8k 10k 12k 14k 16k 18k 20k
Frequency (Hz)
Figure 2:
-20 -40 -60 -80 -100 -120 -140 -160 0 2k 4k 6k 8k 10k 12k 14k 16k 18k 20k
Frequency (Hz)
Figure 3:
-20 -40 -60 -80 -100 -120 -140 -160 0 2k 4k 6k 8k 10k 12k 14k 16k 18k 20k
Frequency (Hz)
audio.national.com
21
Audio Products
Motor Drivers
Product ID
New
Shutdown Low
Packaging LLP-8
LM4570
Mute/Shutdown Mute and standby Mute and standby Mute Mute Mute and standby
Packaging TO220-5 (TA) TO220-15 (TA) TO220-15 (TA) TO220-27 (TA) TO220-27 (TA) TO220-27 (TA)
Audio Controls
Product ID LM1036 LM1971 LM1972 LM1973 Description Dual DC operated tone/volume balance circuit Single-channel audio attenuator 2-Channel digitally controlled audio attenuator 3-Channel digitally controlled audio attenuator Audio Ch. 2 1 2 3 Supply Voltage Range (V) 9 to 16 4.5 to 12 4.5 to 12 4.5 to 12 Typ SNR (dB) 80 115 120 120 Typ THD (%) 0.05 0.00 0.00 0.00 Typ Separation Comm. (dB) Interface 75 110 110 DC control Serial Serial Serial Packaging DIP-20, SOIC-20 DIP-8, SOIC-8 DIP-20, SOIC-20 DIP-20, SOIC-20
22
Design Tools
Audio Education eBooks Expand your knowledge of audio design with tutorials written by Nationals audio experts on the following topics: Distributed Mode Actuators Ceramic Speakers Stereo Enhancement 3D Sounds 3D Ringsounds Polyphony Polyphonic Ringtones audio.national.com Application Solutions Access over 100 interactive system block diagrams for cell phones, PDAs, consumer electronics, communications, and more. solutions.national.com
Nationals Analog Edge Nationals monthly analog design technical journal. edge.national.com
WEBENCH Audio Online Design Environment Find the right audio amplifier and perform frequency response and thermal simulation. Analyze your circuit under target audio constraints and change load, THD, copper area, ambient temperature, and input frequency. Compare several product options and the effects of different package types. webench.national.com
Online Seminars View over 50 design seminars by industry experts. Log onto www.national.com/onlineseminar
Analog University Expand your knowledge and understanding of analog with our free online educational training tool. analogU.national.com
News@National Register to receive updates on audio products and technical topics that interest youspam-free! www.national.com/newsletter
audio.national.com
23
Packaging Solutions
Packaging
Many design qualities are required for effective portable devices, and one of the most important is packaging. Nationals leadership in small form factor packaging covers Die and Wafer Scale packaging to the technologically advanced LLP packaging. For more information, visit www.national.com/packaging
Americas Email: Phone: Europe Fax: Email: Phone: new.feedback@nsc.com 1-800-272-9959
visit: audio.national.com
Nationals LLP provides excellent power dissipation capability in a very small package Leadless Leadframe footprint. Unlike conventional leaded plastic Package (LLP) packages, the LLP contains pads on the bottom of JA 40 to 60C/W the package for PCB mounting.
Also : ble availa pitch 0.4 mmSMD! icro m
jpn.feedback@nsc.com
micro SMD National Semiconductor 2900 Semiconductor Drive Santa Clara, CA 95051 Mailing address: PO Box 58090 Santa Clara, CA 95052 Visit our website at: www.national.com For more information, send email to: new.feedback@nsc.com SOIC 100 to 190C/W
JA
220C/W
JA
JA
MDIP 30 to 90C/W
JA
TO220 45 to 65C/W
24
National Semiconductor Corporation, September 2006. National Semiconductor, , LLP, WEBENCH, Boomer, Overture, SPiKe, and Analog University are registered trademarks of National Semiconductor Corporation. All rights reserved.
570154-014