Beruflich Dokumente
Kultur Dokumente
2 Piece Pack Includes: DV18DL Impact (Hammer) Driver Drill, WH18DL Impact Driver, 2 x 3.0Ah Li-ion Cassette Batteries With MPC, UC18YRL Cooling Charger And Carry Case
Power Pack 1
Limited Edition
2 Piece Pack Includes: DV18DSL Impact (Hammer) Driver Drill, WH18DSL Impact Driver, 2 x 3.0Ah Li-ion Slide Batteries With MPC, UC18YRSL Charger And Carry Case
Power Pack 4
649
Also available:
Power Pack 2
539
2 Piece Pack Includes: DV18DL Impact (Hammer) Driver Drill, WR18DL Impact Wrench, 2 x 3.0Ah Li-ion Cassette Batteries With MPC, UC18YRL Cooling Charger And Carry Case $649
Limited Edition
5 Piece Pack Includes: DV18DL Impact (Hammer) Driver Drill, CR18DL Reciprocating Saw, G18DL Angle Grinder, R18DL Wet & Dry Vacuum, UB18DL Lantern, 2 x 3.0Ah Li-ion Cassette Batteries With MPC, UC18YRL Cooling Charger And Site Bag
Power Pack 3
Limited Edition
2 Piece Brushless Pack Includes: DV18DBL Impact (Hammer) Driver Drill, WR18DBDL Impact Wrench, 2 x 3.0Ah Li-ion Slide Batteries With MPC, UC18YRSL Charger And Carry Case
Power Pack 6
699
Also available:
Power Pack 5
839
2 Piece Brushless Pack Includes: DV18DBL Impact (Hammer) Driver Drill, WH18DBDL Impact Driver, 2 x 3.0Ah Li-ion Slide Batteries With MPC, UC18YRSL Charger And Carry Case $699
Products Marked With This Symbol Are Eligible For A Bonus Battery! Visit www.hitachibonusbattery.com.au to Redeem Online!
Full Terms and Conditions Apply, see website for details. Eligible products are limited to 18V 3.0Ah Tool Sets (which must include a tool, 2 batteries and a charger only) and Limited Edition Power Packs. Valid for purchases between 15.01.12 - 31.03.12
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case Blade Can Be Loaded In Upward Or Downward Direction Tool-less Blade Change External Access To Carbon Brushes
599
599
Simply purchase any eligible Hitachi 18V 3.0Ah Tool Set or Limited Edition Power Pack between 15.01.12 and 31.03.12 from an authorised Hitachi Dealer and redeem a BONUS 18V 3.0Ah battery online! www.hitachibonusbattery.com.au
18V Slide Jigsaw CJ18DSL
C18DSL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case Three Mode Orbital Action Or Straight Cut Tool-less Blade Change Integrated Dust Blower
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case 165mm Blade With Cutting Capacity Up To 57mm Electric Brake And Magnesium Blade Cover
599
599
539
WH18DSAL
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case 145Nm Tightening Torque Lightweight At 1.5kg Steel Belt Hook
95
109
$
369
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case 13mm Keyless Chuck Steel Belt Hook 2 Speed Gearbox With All Metal Gears
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case 13mm Single Sleeve Metal Keyless Chuck With Automatic Spindle Lock 2 Speed Gearbox With All Metal Gears 57Nm Hard Torque
279
469
DS18DSL Driver Drill
499
619
Also available: - Naked DS18DSFL(H4) $139 - Slide Impact Driver Drill DV18DSFL $294 / Naked DV18DSFL(H4) $149
WR18DBDL
AM/FM Radio
Includes AC Adaptor
UR18DSL(H4)
DS18DBL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case 250Nm Tightening Torque 30% More Efficient Hitachi Brushless Motor 4 Stage Speed Selector And Electronic Switch Plus Two Mode Impact Rate: Single Or Continuous
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case 30% More Efficient Hitachi Brushless Motor 4 Stage Speed Selector And Electronic Switch - 50% Less Trigger Force Required 2 Speed Gearbox With All Metal Gears
Compatible With All Hitachi 9.6V - 18V Slide & Cassette Batteries (Excluding 10.8/12V Peak) Compatible With iPod, MP3 And CD Players
589
169
599
WH18DSL
WH18DBDL
WM18DBL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case 145Nm Tightening Torque Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit Steel Belt Hook
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case 165Nm Tightening Torque 30% More Efficient Hitachi Brushless Motor 4 Stage Speed Selector And Electronic Switch Plus Two Mode Impact Rate: Single Or Continuous
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case 33Nm Tightening Torque 30% More Efficient Hitachi Brushless Motor Industry First Low Noise Electronic Pulse System 5 Operation Modes - Easily Select The Right Function For The Right Job
549
589
NEW
999
CH18DL
Includes 1 x 1.5Ah Li-ion Battery with MPC and Cooling Charger 520mm Blade 15mm Cutting Capacity Up to 50 min Run Time (With 1.5Ah)
539
269
NEW
$
599
COMING SOON IN 18V SLIDE!
C18DL
R18DL(H4)
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case 165mm Blade With Cutting Capacity Up To 57mm Electric Brake And Magnesium Blade Cover Base Plate Fine Angle Adjustment
599
Capable of Approx. 29mins Continuous Run Time When Using 3.0Ah Battery Semi Transparent Dust Case Lightweight At 1.5kg (With 3.0Ah Li-ion Battery)
95
CJ18DL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case
Simply purchase any eligible Hitachi 18V 3.0Ah Tool Set or Limited Edition Power Pack from an authorised Hitachi Dealer and redeem a bonus 18V 3.0Ah Battery!
Products Marked With This Symbol Are Eligible For A Bonus Battery!
Visit www.hitachibonusbattery.com.au to Redeem Online!
Three Mode Orbital Action Or Straight Cut Tool-less Blade Change Integrated Dust Blower $
599
$
Also available: Naked CJ18DL(H4) $259
109
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case SDS Plus Chuck With 16mm Max Drilling Capacity Two Mode Action: Hammer Drilling For SDS Plus Drill Bits And Non Hammer Drilling For Adaptor Chuck With HSS Drill Bits
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit 13mm Single Sleeve Metal Keyless Chuck With Automatic Spindle Lock 2 Speed Gearbox With All Metal Gears
599
294
579
DS18DFL
DS18DL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case 480Nm Tightening Torque Forward & Reverse Rocker Switch Bright LED light
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case 13mm Single Sleeve Keyless Chuck Lightweight At 1.7kg 2 Speed Gearbox With All Metal Gears
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case Two Power Mode: Save Mode For Small Bit or Power Mode For Larger Bit 13mm Single Sleeve Metal Keyless Chuck With Automatic Spindle Lock 2 Speed Gearbox With All Metal Gears
NEW
849
279
559
WR18DL
WH18DFL
WH18DL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case 150Nm Tightening Torque Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit Belt Hook With LED Light
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case 130Nm Tightening Torque Lightweight At 1.5kg Belt Hook With LED Light
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case 150Nm Tightening Torque Two Power Mode: Save Mode For Small Bit or Power Mode for Larger Bit Belt Hook With LED Light
549
369
549
WH14DBDL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case 160Nm Tightening Torque 30% More Efficient Hitachi Brushless Motor 4 Stage Speed Selector And Electronic Switch Plus Two Mode Impact Rate: Single Or Continuous
489
489
DS14DBL
WR14DBDL
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case 30% More Efficient Hitachi Brushless Motor 4 Stage Speed Selector And Electronic Switch 50% Less Trigger Force Required 2 Speed Gearbox With All Metal Gears
Includes 2 x 3.0Ah Li-ion Batteries with MPC, Cooling Charger and Carry Case 235Nm Tightening Torque 30% More Efficient Hitachi Brushless Motor 4 Stage Speed Selector And Electronic Switch Plus Two Mode Impact Rate: Single Or Continuous
459
489
Pneumatics
Framing Nailer
Fires 50 - 90mm 34 Framing Nails Sequential & Bump Fire Trigger Tool-less Depth Dial Industrial Strength Top Housing
NR90AD
DA Finish Nailer
Fires 32-65mm DA Series Finish Nails Sequential & Bump Fire Trigger Integrated Air Duster Tool-less Depth Dial
NT65MA4
599
479
PACK232
DS10DFL
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case 10mm Single Sleeve Keyless Chuck Lightweight At 1.0kg 2 Speed Gearbox With All Metal Gears
188mm
299
$
199
210mm
753948 / 753949
GP10DL
WH10DL
753949 397 Piece Mini Grinder Accessory Set 753948 200 Piece Mini Grinder Accessory Set Both kits contain high quality 1/8 (3.2mm) shaft diameter bits which are compatible with the Hitachi GP10DL and the majority of competitor mini grinders
Includes 2 x 1.5Ah Li-ion Batteries with MPC, 42 Accessories, Charger and Carry Case Compact, Slim, Soft Grip Body Lightweight At 0.48kg Anti-Start Safety Override When Replacing Batteries
208mm
Includes 2 x 1.5Ah Li-ion Batteries with MPC, Charger and Carry Case 105Nm Tightening Torque Lightweight At 0.9kg
139mm
249
269
204mm
Pneumatics
C Series Finish Nailer
Fires 25 - 65mm C Series Finish Nails Sequential & Bump Fire Trigger Integrated Air Duster Tool-less Depth Dial
NT65M2
NT50AE2
N3804AB3
299
219
179
Drilling
Hitachis Slide Compound Mitre Range encompasses the following features within its range:
Linear ball bearing slide system for superior accuracy and control. Positive stops on mitre and bevel scale, for easy to read measurements and quick settings. High sub fences to support work piece for improved stability while cutting. Splinter guard to prevent material from splintering increasing user safety. High levels of dust collection to keep jobsite clean. Quick Change Depth Adjustment Guide Laser Marker, Digital Readout and LED Light (not featured on all tools). 13mm Impact Drill
550W Motor 13mm Keyless Chuck Reversible With Variable Speed Also available: 16mm Impact Drill DV16VSS $119
DV13VSS
DV16V
109
169
DV18V
D13VB3
Hitachis dual slide system provides accurate & increased cutting capacity whilst providing added safety and portability
690W Motor 13mm Keyless Chuck Aluminium Housing Variable Speed With Reverse
229
399
BONUS
1 x Site Bag
DV20VB2
D6SH
299
139
Wood Work
190mm Circular Saw
Includes 2 x 40T Blades 1010W Motor Lightweight At 3.4kg Aluminium Base With 68mm Depth Of Cut Also available: 165mm Circular Saw C6MFA $155
C7MFA
C7SB2-K
C9SA2
1710W Motor Lightweight At 4.6kg Aluminium Base With 60mm Depth Of Cut
2000W Motor Lightweight At 6.8kg Aluminium Base With 86mm Depth Of Cut
259
319
159
FSV10SA
D Handle Jigsaw
400W Motor Variable Speed Compact & Lightweight
FCJ65V3
149
119
129
305mm Slide Compound Saw with Laser 1520W Motor 107 x 312mm Cutting Capacity With Zero Clearance Slide Structure
C12RSH
C8FSE
1050W Motor 75 x 262mm Cutting Capacity With Positive Mitre Stops Also available: 216mm Slide Compound Saw with Laser Marker & LED Light C8FSHE $899
Also available: 305mm Slide Compound Saw with Laser Marker and Digital Readout C12LSH $1149
999
849
399
Wood Work
Hitachi's G13YF & G13VA Grinders
1430 Watts of Power Overload Protection Soft Start Constant Speed Control Kick Back Protection Zero Voltage Restart Anti Vibration Side Handle Tool-less Wheel Guard
30mm 3 Mode Rotary Hammer DH30PC2 40mm 2 Mode Rotary Hammer DH40MRY
850W Motor With 5.4 Joules Impact SDS Plus With 30mm Max. Drilling Capacity Variable Speed 950W Motor With 10 Joules Impact SDS Max Chuck With 40mm Max Drilling Capacity Variable Speed
DH24PC3
800W Motor With 3.2 Joules Impact SDS Plus Chuck With 24mm Max Drilling Capacity Variable Speed With Reverse
229
359
BONUS
1 x SDS Plus Bit Set
699
1099
H65SB2
H90SB
1199
2999
Metal Work
125mm Angle Grinder Pack G13SR3-BP 125mm Angle Grinder G13YF 125mm Angle Grinder
1300W Motor Anti Vibration Side Handle Tool-less Guard
G13SB3
Pack Includes: 730W Angle Grinder With 3 x Cutting Wheels, 1 x Grinding Wheel, 1 x Diamond Wheel, 1 x Tape Measure & Carry Case Also available: 100mm Angle Grinder Pack G10SR3-BP $99
1430W Motor Soft Start, Constant Speed Control, Overload Protection, Kick Back Protection, 0 Voltage Restart Tool-less Guard
119
369
279
G13SR3-CWP
100mm Angle Grinder With Paddle Switch 840W Motor 196mm Ultra Slim Grip Circumference Full Length Paddle Switch
G10SQ
Pack Includes: 730W Angle Grinder With 10 x Cutting Wheels, 1 x Grinding Wheel, 1 x Tape Measure & Carry Case Also available: 100mm Angle Grinder Cutting Pack G10SR3-CWP $109
NEW
399
119
$
180mm Angle Grinder
2400W Motor Anti Vibration Side Handle Tool-less Guard
129
G18SE3 230mm Angle Grinder
2400W Motor Anti Vibration Handle Tool-less Guard
G23SE2
Pack 224
Pack Includes: 2400W, 355mm Cut Off Machine 730W, 100mm Angle Grinder With Bonus
279
299
439
Accessories
38mm 2 Mode Rotary Hammer
950W Motor With 9 Joules Impact SDS Max Chuck With 38mm Max. Drilling Capacity 12 Angle Chisel Position
DH38MS
Drill Press
750W (1Hp) Motor With 16mm Chuck Laser Guide For Pre-alignment Of Drilling 12 Speed Belt Drive
B16RM
699
NEW
$
689
G13SQ
NEW
$
139
797130 41 Piece Socket Set 752500 Reciprocating Saw Blade Pack 752049
Includes 12 Blades in a Roll Up Satchel Assortment of Timber and Metal Applications
Includes 3 x 105mm Wheels 1) Continuous Rim - Ideal for Porcelain Cutting 2) Segmented Rim - Ideal for Concrete Cutting 3) Turbo Rim - Ideal for All Purpose Fast Cutting
DISCLAIMER Prices effective from the 01/01/2012 to 31/03/2012 unless stock is sold out. All prices include GST unless otherwise marked. Prices and products are current at the time of printing but are subject to change without notice. Prices in this catalogue are a guide only, prices may vary from store to store. Accessories not included unless otherwise stated. Illustrations are for display purpose only. Not all items shown in this brochure are held in stock by retailers at all times. Orders can be taken for product not held in stock at time of enquiry. Errors and Omissions Excepted (E&OE). Brochure prepared by Hitachi Power Tools Australia Pty Ltd ABN 27 072 677 153 for use by participating retailers.
www.hitachi-powertools.com.au
Find Us On Facebook