Sie sind auf Seite 1von 15

ATF-53189

Enhancement Mode [1] Pseudomorphic HEMT


in SOT 89 Package

Data Sheet

Description

Features

Avago Technologiess ATF-53189 is a single-voltage high


linearity, low noise E-pHEMT FET packaged in a low cost
surface mount SOT89 package. The device is ideal as a
high-linearity, low noise, medium-power amplifier. Its
operating frequency range is from 50 MHz to 6 GHz.

! Single voltage operation

ATF-53189 is ideally suited for Cellular/PCS and WCDMA


wireless infrastructure, WLAN, WLL and MMDS application,
and general purpose discrete E-pHEMT amplifiers which
require medium power and high linearity. All devices are
100% RF and DC tested.

Pin Connections and Package Marking

! High Linearity and Gain


! Low Noise Figure
! Excellent uniformity in product specifications
! SOT 89 standard package
! Point MTTF > 300 years[2]
! MSL-1 and lead-free
! Tape-and-Reel packaging option available

Specifications
2 GHz, 4.0V, 135 mA (Typ.)

! 40.0 dBm Output IP3


! 23.0 dBm Output Power at 1dB gain compression

3GX

! 0.85 dB Noise Figure


! 15.5 dB Gain

S
Top View

! 46% PAE at P1dB


! LFOM[3] 12.7 dB

Applications
! Front-end LNA Q1 and Q2, Driver or Pre-driver Amplifier for Cellular/PCS and WCDMA wireless infrastructure

S
G
Bottom View

Notes:
Package marking provides orientation and identification:
3G = Device Code
x = Month code indicates the month of manufacture.

D = Drain
S = Source
G = Gate

! Driver Amplifier for WLAN, WLL/RLL and MMDS applications


! General purpose discrete E-pHEMT for other high
linearity applications
Notes:
1. Enhancement mode technology employs a single positive Vgs,
eliminating the need of negative gate voltage associated with
conventional depletion mode devices.
2. Refer to reliability datasheet for detailed MTTF data.
3. Linearity Figure of Merit (LFOM) is OIP3 divided by DC bias power.

ATF-53189 Absolute Maximum Ratings[1]


Symbol
Vds

Parameter
[2]

DrainSource Voltage

[2]

Units

Absolute
Maximum

-5 to 1.0

Vgs

GateSource Voltage

Vgd

Gate Drain Voltage[2]

-5 to 1.0

Ids

Drain Current[2]

mA

300

Igs

Gate Current

mA

20

[3]

Pdiss

Total Power Dissipation

1.0

Pin max.

RF Input Power

dBm

+24

Tch

Channel Temperature

150

Tstg

Storage Temperature

-65 to 150

Thermal Resistance[2,4]
#ch-b = 70C/W
Notes:
1. Operation of this device above any one of
these parameters may cause permanent
damage.
2. Assuming DC quiescent conditions.
3. Board (package belly) temperature TB is
25C. Derate 14.30 mW/C for TB > 80C.
4. Channel-to-board thermal resistance
measured using 150C Liquid Crystal Measurement method.

ATF-53189 Electrical Specifications


TA = 25C, DC bias for RF parameters is Vds = 4.0V and Ids = 135 mA unless otherwise specified.
Symbol

Parameters and Test Conditions

Units

Min.

Typ.

Max.

Vgs

Operational Gate Voltage

Vds = 4.0V, Ids = 135 mA

0.65

Vth

Threshold Voltage

Vds = 4.0V, Ids = 8 mA

0.30

Ids

Drain to Source Current

Vds = 4.0V, Vgs = 0V

3.70

Gm

Transconductance

Vds = 4.0V, Gm = "Ids/"Vgs; mmho


"Vgs = Vgs1 Vgs2
Vgs1 = 0.6V, Vgs2 = 0.55V

650

Igss

Gate Leakage Current

Vds = 0V, Vgs = -4V

-10.0

-0.34

NF

Noise Figure

f=900 MHz
f=2.0 GHz
f=2.4 GHz

dB
dB
dB

0.80
0.85
1.00

1.3

Gain [1]

f=900 MHz
f=2.0 GHz
f=2.4 GHz

dB
dB
dB

14.0

17.2
15.5
15.0

17.0

OIP3

Output 3rd Order Intercept Point[1]

f=900 MHz
f=2.0 GHz
f=2.4 GHz

dBm
dBm
dBm

36.0

42.0
40.0
38.6

P1dB

Output 1dB Compressed [1]

f=900 MHz
f=2.0 GHz
f=2.4 GHz

dBm
dBm
dBm

21.7
23.0
23.2

PAE

Power Added Efficiency

f=900 MHz
f=2.0 GHz
f=2.4 GHz

%
%
%

33.8
46.0
49.0

ACLR

Adjacent Channel Leakage


Power Ratio [1,2]

Offset BW = 5 MHz
Offset BW = 10 MHz

dBc
dBc

-54.0
-64.0

Notes:
1. Measurements at 2 GHz obtained using production test board described in Figure 1.
2. ACLR test spec is based on 3GPP TS 25.141 V5.3.1 (2002-06)
- Test Model 1
- Active Channels: PCCPCH + SCH + CPICH + PICH + SCCPCH + 64 DPCH (SF=128)
- Freq = 2140 MHz
- Pin = -8 dBm
- Channel Integrate Bandwidth = 3.84 MHz

Input Matching Circuit


_mag=0.74
_ang=-112.4

Input

Output Matching Circuit


_mag=0.40
_ang=120.0

DUT

Output

Figure 1. Block diagram of the 2 GHz production test board used for NF, Gain, OIP3 , P1dB, PAE and
ACLR measurements. This circuit achieves a trade-off between optimal OIP3, P1dB and VSWR. Circuit
losses have been de-embedded from actual measurements.

Product Consistency Distribution Charts [1,2]


150

150

Stdev=0.08

Stdev=0.86
120

FREQUENCY

FREQUENCY

120

90

3 Std

+3 Std

60

90

3 Std

+3 Std

60

30

30

.5

36 37 38 39 40 41 42 43 44 45

.6

.7

.8

1.1

Figure 3. NF @ 2 GHz, 4V, 135 mA.


USL = 1.30 dBm, Nominal = 0.84 dBm.

Figure 2. OIP3 @ 2 GHz, 4V, 135 mA.


LSL = 36 dBm, Nominal = 40 dBm.

150

150

Stdev=1.14

Stdev=0.22
120

90

3 Std

+3 Std

60

FREQUENCY

120

FREQUENCY

.9

NF (dB)

OIP3 (dBm)

90

3 Std

+3 Std

60

30

30

0
14.5

15

15.5

16

16.5

Gain (dB)

Figure 4. Gain @ 2 GHz, 4V, 135 mA.


LSL = 14 dBm, Nominal = 15.5 dBm,
USL = 17 dBm.

19

20

21

22

23

24

25

26

P1dB (dBm)

Figure 5. P1dB @ 2 GHz, 4V, 135 mA.


Nominal = 23 dBm.

Notes:
1. Distribution data sample size is 500 samples taken from 3 different wafers. Future wafers
allocated to this product may have nominal values anywhere between the upper and lower
limits.
2. Measurements are made on production test board, which represents a trade-off between
optimal OIP3, P1dB and VSWR. Circuit losses have been de-embedded from actual measurements.

Gamma Load and Source at Optimum OIP3 Tuning Conditions


The devices optimum OIP3 measurements were determined using a Maury Load Pull System at 4.0V, 135 mA quiesent
bias.
Typical Gammas at Optimum OIP3 [1]
Freq
(GHz)

Gamma Source
Mag
Ang (deg)

Gamma Load
Mag
Ang (deg)

OIP3
(dBm)

Gain
(dB)

P1dB
(dBm)

PAE
(%)

0.9

0.8179

-143.28

0.0721

124.08

42.0

17.2

21.7

33.8

2.0

0.7411

-112.36

0.4080

119.91

41.6

15.6

23.4

44.2

3.9

0.6875

-94.23

0.4478

174.74

41.3

11.2

23.1

41.4

5.8

0.5204

-75.91

0.3525

-120.13

36.9

5.6

22.4

25.7

Note:
1. Typical describes additional product performance information that is not covered by the product warranty.

400
0.9V

350

Ids (mA)

300

0.8V

250
0.7V

200
150

0.6V

100

0.5V

50
0

Vds (V)

Figure 6. Typical IV Curve.

45

45

40

40

40

35

35

35

3V
4V
5V

25

20
75

90

105

120

135

150

165

30
3V
4V
5V

25

20
75

180

90

105

Ids (mA)

135

150

165

20
75

180

Figure 8. OIP3 vs. Ids and Vds at 2 GHz.

18

12

17

17

10

16
15
14

120

135

150

165

16
15
14

3V
4V
5V

13

GAIN (dB)

18

GAIN (dB)

14

105

13
12
75

180

90

105

120

135

150

165

3V
4V
5V
90

105

120

135

150

165

3V
4V
5V

180

Ids (mA)

Figure 13. OIP3 vs. Ids and Vds at 5.8 GHz.

0
75

135

150

165

180

60
Gain_3V
Pout_3V
PAE_3V

90

105

120

135

150

165

180

40

15

30

10

20

10

0
-14

0
-10

-6

Ids (mA)

Figure 14. Small Signal Gain vs. Ids and Vds


at 5.8 GHz.

50

20

-2

10

Pin (dBm)

Figure 15. Small Signal Gain/Pout/PAE vs.


Pin at Vds=3V and Freq = 900 MHz.

Note:
Bias current for the above charts are quiescent conditions. Actual level may increase depending on amount of RF drive.

120

30

GAIN (dB) & Pout (dBm)

OIP3 (dBm)

GAIN (dB)

3V
4V
5V
90

105

Figure 12. Small Signal Gain vs. Ids and Vds


at 3.9 GHz.

25

25

180

Ids (mA)

30

165

0
75

180

35

150

Figure 11. Small Signal Gain vs. Ids and Vds


at 2 GHz.

40

135

Ids (mA)

Figure 10. Small Signal Gain vs. Ids and Vds


at 900 MHz.

120

3V
4V
5V

Ids (mA)

20
75

105

Figure 9. OIP3 vs. Ids and Vds at 3.9 GHz.

19

90

90

Ids (mA)

19

12
75

3V
4V
5V

25

Ids (mA)

Figure 7. OIP3 vs. Ids and Vds at 900 MHz.

GAIN (dB)

120

30

PAE (%)

30

OIP3 (dBm)

45

OIP3 (dBm)

OIP3 (dBm)

ATF-53189 Typical Performance Curves (at 25C unless specified otherwise)


Tuned for Optimal OIP3 at Vd = 4.0V, Ids = 135 mA.

ATF-53189 Typical Performance Curves (at 25C unless specified otherwise), continued
Tuned for Optimal OIP3 at Vd = 4.0V, Ids = 135 mA.

15

30

10

20

10

20

10

0
-14

PAE (%)

30

10

-10

-6

Pin (dBm)

30

30

10

20

10

-2

10

60
Gain_3V
Pout_3V
PAE_3V

25

20

40

15

30

10

20

10

14

20

10

10

0
-10

14

0
-6

-2

30

60
Gain_5V
Pout_5V
PAE_5V

30

10

20

10

0
-10

Pin (dBm)

Figure 22. Small Signal Gain/Pout/PAE vs.


Pin at Vds=4V and Freq = 3.9 GHz.

PAE (%)

15

14

18

10

14

30
Gain_3V
Pout_3V
PAE_3V

25

25

20

20

15

15

10

10

10

18

0
-6

-2

Pin (dBm)

Figure 21. Small Signal Gain/Pout/PAE vs.


Pin at Vds=5V and Freq = 3.9 GHz.

10

14

18

22

Pin (dBm)

Figure 24. Small Signal Gain/Pout/PAE vs.


Pin at Vds=3V and Freq = 5.8 GHz.

Note:
Bias current for the above charts are quiescent conditions. Actual level may increase depending on amount of RF drive.

10

30

50
40

-2

Figure 21. Small Signal Gain/Pout/PAE vs.


Pin at Vds=3V and Freq = 3.9 GHz.

Figure 20. Small Signal Gain/Pout/PAE vs.


Pin at Vds=5V and Freq = 2 GHz.

-6

Pin (dBm)

20

18

50

10

0
-10

PAE (%)

30

30

25

14

15

10

40

10

-2

20

20

-6

Figure 18. Small Signal Gain/Pout/PAE vs.


Pin at Vds=3V and Freq = 2 GHz.

50

10

GAIN (dB) & Pout (dBm)

GAIN (dB) & Pout (dBm)

0
-6

Pin (dBm)

30

50

0
-10

15

60

0
10

Pin (dBm)

Gain_4V
Pout_4V
PAE_4V

-2

10

40

14

30

-6

20

Figure 19. Small Signal Gain/Pout/PAE vs.


Pin at Vds=4V and Freq = 2 GHz.

0
-10

10

60

Pin (dBm)

25

20

Gain_5V
Pout_5V
PAE_5V

25

GAIN (dB) & Pout (dBm)

GAIN (dB) & Pout (dBm)

15

-2

10

30

50
40

-6

30

Figure 17. Small Signal Gain/Pout/PAE vs.


Pin at Vds=5V and Freq = 900 MHz.

60
Gain_4V
Pout_4V
PAE_4V

20

0
-10

15

Pin (dBm)

Figure 16. Small Signal Gain/Pout/PAE vs.


Pin at Vds=4V and Freq = 900 MHz.

25

-2

40

GAIN (dB) & Pout (dBm)

-2

15

50

20

GAIN (dB) & Pout (dBm)

-6

40

PAE (%)

-10

20

25

PAE (%)

0
-14

50

60
Gain_3V
Pout_3V
PAE_3V

PAE (%)

40

25

30

PAE (%)

20

60
Gain_5V
Pout_5V
PAE_5V

PAE (%)

50

GAIN (dB) & Pout (dBm)

GAIN (dB) & Pout (dBm)

25

30

GAIN (dB) & Pout (dBm)

60
Gain_4V
Pout_4V
PAE_4V

PAE (%)

30

ATF-53189 Typical Performance Curves (at 25C unless specified otherwise), continued
Tuned for Optimal OIP3 at Vd = 4.0V, Ids = 135 mA.
30
Gain_4V
Pout_4V
PAE_4V

25

20

20

15

15

10

10

5
0
-6

-2

10

14

18

30
Gain_5V
Pout_5V
PAE_5V

25

GAIN (dB) & Pout (dBm)

25

20

20

15

15

10

10

PAE (%)

GAIN (dB) & Pout (dBm)

25

30

22

PAE (%)

30

0
-6

-2

Pin (dBm)

10

14

18

22

Pin (dBm)

Figure 25. Small Signal Gain/Pout/PAE vs.


Pin at Vds = 4V and Freq = 5.8 GHz.

Figure 26. Small Signal Gain/Pout/PAE vs.


Pin at Vds = 5V and Freq = 5.8 GHz.

ATF-53189 Typical Performance Curves, continued


Tuned for Optimal OIP3 at Vd = 4.0V, Ids = 135 mA, Over Temperature and Frequency
18

46

16

44

14

GAIN (dB)

OIP3 (dBm)

42
40
38
-40C
25C
80C

36
34
0.5

1.5

2.5

12
10
10
-40C
25C
80C

8
6
3.5

4.5

5.5

4
0.5

6.5

1.5

2.5

3.5

4.5

5.5

6.5

FREQUENCY (GHz)

FREQUENCY (GHz)

Figure 28. Gain vs. Temperature and


Frequency at optimum OIP3.

Figure 27. OIP3 vs. Temperature and


Frequency at optimum OIP3.
50

25

45

24

P1dB (dBm)

PAE (%)

40
35
30
-40C
25C
80C

25
20
0.5

1.5

2.5

23

22
-40C
25C
80C

21

3.5

4.5

5.5

FREQUENCY (GHz)

Figure 29. PAE vs. Temperature and


Frequency at optimum OIP3.

6.5

20
0.5

1.5

2.5

3.5

4.5

5.5

6.5

FREQUENCY (GHz)

Figure 30. P1dB vs. Temperature and


Frequency at optimum OIP3.

Note:
Bias current for the above charts are quiescent conditions. Actual level may increase depending on amount of RF drive.

ATF-53189 Typical Performance Curves (at 25C unless specified otherwie), continued
Tuned for Optimal OIP3 at Vd = 4.0V, Ids = 135 mA
45

18
17

40

35

GAIN (dB)

OIP3 (dBm)

16

30

15
14
13

3V
4V
5V

25

11
90

105

120

135

150

165

180

75

90

105

120

Ids (mA)

Figure 31. OIP3 vs. Ids and Vds at 2.4 GHz.

30

30

10

20

10

15

30

10

20

10

10

0
-10

14

0
-6

-2

10

14

Pin (dBm)

Figure 33. Small Signal Gain/Pout/PAE vs.


Pin at Vds 3V and Freq = 2.4 GHz.
30

Figure 34. Small Signal Gain/Pout/PAE vs.


Pin at Vds 4V and Freq = 2.4 GHz.

60
Gain_5V
Pout_5V
PAE_5V

50

20

40

15

30

10

20

10

PAE (%)

25

GAIN (dB) & Pout (dBm)

50
40

Pin (dBm)

0
-10

60

20

PAE (%)

15

-2

180

Gain_4V
Pout_4V
PAE_4V

25

GAIN (dB) & Pout (dBm)

GAIN (dB) & Pout (dBm)

40

-6

165

30

50

20

0
-10

150

Figure 32. Small Signal Gain vs. Ids and Vds


at 2.4 GHz.
60

Gain_3V
Pout_3V
PAE_3V

25

135

Ids (mA)

PAE (%)

20
75

3V
4V
5V

12

0
-6

-2

10

14

Pin (dBm)

Figure 35. Small Signal Gain/Pout/PAE vs.


Pin at Vds 5V and Freq = 2.4 GHz.

Note:
Bias current for the above charts are quiescent conditions. Actual level may increase depending on amount of RF drive.

ATF-53189 Typical Scattering and Noise Parameters at 25C, VDS = 4.0V, IDS = 180 mA
Freq.
GHz

Mag.

Ang.

dB

S21
Mag.

Ang.

dB

S12
Mag.

Ang.

S22
Mag.

Ang.

MSG/MAG
dB

0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0

0.544
0.704
0.777
0.813
0.856
0.866
0.872
0.874
0.876
0.880
0.881
0.882
0.879
0.874
0.882
0.889
0.903
0.918
0.948
0.960
0.941
0.946
0.937
0.914
0.951
0.948
0.939
0.948
0.947
0.903

-133.2
-158.7
-169.4
-176.1
178.5
174.5
170.9
167.5
164.1
161.0
150.2
137.1
124.9
112.7
99.5
92.6
78.2
61.3
41.2
24.3
11.8
10.8
0.3
-8.0
-12.1
-20.6
-23.6
-23.1
-24.3
-32.5

31.0
25.6
22.2
19.7
17.7
16.2
14.9
13.9
12.9
12.1
9.3
6.5
4.3
2.3
0.5
-0.7
-3.5
-5.8
-8.2
-10.2
-12.4
-14.6
-16.0
-17.7
-19.2
-21.0
-21.4
-21.1
-18.9
-17.1

35.531
19.023
12.872
9.705
7.687
6.438
5.582
4.939
4.433
4.026
2.910
2.123
1.647
1.304
1.062
0.921
0.669
0.515
0.389
0.308
0.239
0.187
0.158
0.131
0.110
0.089
0.085
0.088
0.114
0.140

110.9
97.1
90.4
85.7
84.4
81.7
79.2
76.5
73.8
70.9
59.6
45.9
33.4
21.1
11.3
1.5
-19.8
-41.5
-59.6
-79.9
-100.5
-109.4
-124.9
-138.0
-153.4
-168.9
177.8
165.9
155.2
133.4

-37.7
-37.1
-36.5
-35.9
-35.4
-34.9
-34.4
-33.6
-33.2
-32.4
-30.5
-28.6
-27.3
-26.6
-26.0
-25.8
-25.2
-25.7
-26.0
-26.7
-28.4
-31.1
-34.4
-46.0
-40.0
-37.1
-39.2
-37.7
-41.9
-35.4

0.013
0.014
0.015
0.016
0.017
0.018
0.019
0.021
0.022
0.024
0.030
0.037
0.043
0.047
0.050
0.051
0.055
0.052
0.050
0.046
0.038
0.028
0.019
0.005
0.010
0.014
0.011
0.013
0.008
0.017

31.7
25.2
24.9
26.3
30.4
32.6
34.5
35.9
36.8
37.1
35.8
31.0
25.0
18.3
12.6
7.1
-5.3
-22.4
-39.5
-55.9
-73.5
-81.6
-108.3
-147.3
71.0
30.2
-4.9
-8.8
-173.5
161.7

0.692
0.738
0.749
0.752
0.756
0.755
0.755
0.753
0.755
0.753
0.753
0.752
0.768
0.766
0.773
0.779
0.793
0.806
0.809
0.844
0.882
0.896
0.872
0.916
0.877
0.882
0.865
0.864
0.856
0.835

-163.7
-173.2
-177.6
179.3
175.7
173.5
171.4
169.4
167.5
165.6
158.4
150.1
142.3
135.5
131.8
123.3
102.9
84.7
69.9
54.6
37.0
27.1
20.3
7.0
-1.1
-7.5
-19.2
-26.2
-33.6
-42.5

34.4
31.3
29.3
27.8
26.6
25.5
24.7
23.7
23.0
22.2
19.2
16.0
13.4
11.5
10.0
9.4
7.0
5.2
3.2
2.1
1.4
0.1
-1.8
-1.3
-4.4
-6.3
-7.2
-6.9
-4.7
-3.2

Freq
GHz

Fmin
dB

Gamma Opt
Mag

Ang

0.5
0.9
1.0
1.5
2.0
2.4
3.0
3.5
5.0
5.8
6.0
7.0
8.0
9.0
10.0

0.65
0.76
0.79
0.86
0.94
1.00
1.10
1.17
1.41
1.53
1.56
1.72
1.87
2.03
2.18

0.394
0.417
0.423
0.465
0.509
0.545
0.600
0.645
0.777
0.840
0.855
0.920
0.970
0.993
0.997

163.6
172.4
175.3
-165.4
-147.7
-134.6
-116.7
-103.3
-70.0
-56.1
-52.9
-39.0
-27.5
-19.1
-7.5

Rn/50
0.11
0.09
0.08
0.08
0.06
0.08
0.16
0.28
0.35
0.41
0.42
0.51
0.97
1.88
2.54

40

Ga
dB
25.82
21.83
21.71
18.70
17.63
16.45
14.90
13.53
11.35
10.31
10.38
9.79
7.91
6.11
4.56

MSG
30

MSG/MAG & |S21|2 (dB)

S11

20
MAG
10
S21
0
-10
-20

10

12

14

16 18

FREQUENCY (GHz)

Figure 36. MSG/MAG & |S21|2 vs. and


Frequency at 4.0V/180 mA.

Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmin below 2 GHz have been extrapolated. The Fmin values are based on
a set of 16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin
is calculated. Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of
the gate lead. The output reference plane is at the end of the drain lead.

ATF-53189 Typical Scattering and Noise Parameters at 25C, VDS = 4.0V, IDS = 135 mA
Freq.
GHz

Mag.

Ang.

dB

S21
Mag.

Ang.

dB

S12
Mag.

Ang.

S22
Mag.

Ang.

MSG/MAG
dB

0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0

0.544
0.704
0.777
0.813
0.856
0.866
0.872
0.874
0.876
0.880
0.881
0.882
0.879
0.874
0.882
0.889
0.903
0.918
0.948
0.960
0.941
0.946
0.937
0.914
0.951
0.948
0.939
0.948
0.947
0.903

-133.2
-158.7
-169.4
-176.1
178.5
174.5
170.9
167.5
164.1
161.0
150.2
137.1
124.9
112.7
99.5
92.6
78.2
61.3
41.2
24.3
11.8
10.8
0.3
-8.0
-12.1
-20.6
-23.6
-23.1
-24.3
-32.5

31.0
25.6
22.2
19.7
17.7
16.2
14.9
13.9
12.9
12.1
9.3
6.5
4.3
2.3
0.5
-0.7
-3.5
-5.8
-8.2
-10.2
-12.4
-14.6
-16.0
-17.7
-19.2
-21.0
-21.4
-21.1
-18.9
-17.1

35.531
19.023
12.872
9.705
7.687
6.438
5.582
4.939
4.433
4.026
2.910
2.123
1.647
1.304
1.062
0.921
0.669
0.515
0.389
0.308
0.239
0.187
0.158
0.131
0.110
0.089
0.085
0.088
0.114
0.140

110.9
97.1
90.4
85.7
84.4
81.7
79.2
76.5
73.8
70.9
59.6
45.9
33.4
21.1
11.3
1.5
-19.8
-41.5
-59.6
-79.9
-100.5
-109.4
-124.9
-138.0
-153.4
-168.9
177.8
165.9
155.2
133.4

-37.7
-37.1
-36.5
-35.9
-35.4
-34.9
-34.4
-33.6
-33.2
-32.4
-30.5
-28.6
-27.3
-26.6
-26.0
-25.8
-25.2
-25.7
-26.0
-26.7
-28.4
-31.1
-34.4
-46.0
-40.0
-37.1
-39.2
-37.7
-41.9
-35.4

0.013
0.014
0.015
0.016
0.017
0.018
0.019
0.021
0.022
0.024
0.030
0.037
0.043
0.047
0.050
0.051
0.055
0.052
0.050
0.046
0.038
0.028
0.019
0.005
0.010
0.014
0.011
0.013
0.008
0.017

31.7
25.2
24.9
26.3
30.4
32.6
34.5
35.9
36.8
37.1
35.8
31.0
25.0
18.3
12.6
7.1
-5.3
-22.4
-39.5
-55.9
-73.5
-81.6
-108.3
-147.3
71.0
30.2
-4.9
-8.8
-173.5
161.7

0.692
0.738
0.749
0.752
0.756
0.755
0.755
0.753
0.755
0.753
0.753
0.752
0.768
0.766
0.773
0.779
0.793
0.806
0.809
0.844
0.882
0.896
0.872
0.916
0.877
0.882
0.865
0.864
0.856
0.835

-163.7
-173.2
-177.6
179.3
175.7
173.5
171.4
169.4
167.5
165.6
158.4
150.1
142.3
135.5
131.8
123.3
102.9
84.7
69.9
54.6
37.0
27.1
20.3
7.0
-1.1
-7.5
-19.2
-26.2
-33.6
-42.5

34.4
31.3
29.3
27.8
26.6
25.5
24.7
23.7
23.0
22.2
19.2
16.0
13.4
11.5
10.0
9.4
7.0
5.2
3.2
2.1
1.4
0.1
-1.8
-1.3
-4.4
-6.3
-7.2
-6.9
-4.7
-3.2

Freq
GHz

Fmin
dB

Gamma Opt
Mag

Ang

0.5
0.9
1.0
1.5
2.0
2.4
3.0
3.5
5.0
5.8
6.0
7.0
8.0
9.0
10.0

0.30
0.41
0.44
0.53
0.62
0.69
0.80
0.89
1.16
1.31
1.34
1.52
1.71
1.89
2.07

0.162
0.291
0.302
0.369
0.433
0.484
0.556
0.613
0.764
0.832
0.848
0.914
0.963
0.991
0.998

150.8
161.3
164.2
-174.2
-154.6
-140.2
-120.6
-106.1
-71.0
-56.6
-53.4
-39.3
-27.9
-18.2
-9.2

Rn/50
0.05
0.05
0.05
0.04
0.04
0.05
0.10
0.19
0.26
0.30
0.30
0.39
0.77
0.96
1.58

40

Ga
dB
26.27
22.12
22.02
18.95
17.05
15.87
14.63
13.21
11.19
10.26
10.04
9.64
8.68
6.57
4.51

MSG
30

MSG/MAG & |S21|2 (dB)

S11

20
MAG
10
S21
0
-10
-20

10

12

14

16 18

FREQUENCY (GHz)

Figure 37. MSG/MAG & |S21|2 vs. and


Frequency at 4.0V/135 mA.

Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmin below 2 GHz have been extrapolated. The Fmin values are based on
a set of 16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin
is calculated. Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of
the gate lead. The output reference plane is at the end of the drain lead.

10

ATF-53189 Typical Scattering and Noise Parameters at 25C, VDS = 4.0V, IDS = 75 mA
Freq.
GHz

Mag.

Ang.

dB

S21
Mag.

Ang.

dB

S12
Mag.

Ang.

S22
Mag.

Ang.

MSG/MAG
dB

0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0

0.544
0.704
0.777
0.813
0.856
0.866
0.872
0.874
0.876
0.880
0.881
0.882
0.879
0.874
0.882
0.889
0.903
0.918
0.948
0.960
0.941
0.946
0.937
0.914
0.951
0.948
0.939
0.948
0.947
0.903

-133.2
-158.7
-169.4
-176.1
178.5
174.5
170.9
167.5
164.1
161.0
150.2
137.1
124.9
112.7
99.5
92.6
78.2
61.3
41.2
24.3
11.8
10.8
0.3
-8.0
-12.1
-20.6
-23.6
-23.1
-24.3
-32.5

31.0
25.6
22.2
19.7
17.7
16.2
14.9
13.9
12.9
12.1
9.3
6.5
4.3
2.3
0.5
-0.7
-3.5
-5.8
-8.2
-10.2
-12.4
-14.6
-16.0
-17.7
-19.2
-21.0
-21.4
-21.1
-18.9
-17.1

35.531
19.023
12.872
9.705
7.687
6.438
5.582
4.939
4.433
4.026
2.910
2.123
1.647
1.304
1.062
0.921
0.669
0.515
0.389
0.308
0.239
0.187
0.158
0.131
0.110
0.089
0.085
0.088
0.114
0.140

110.9
97.1
90.4
85.7
84.4
81.7
79.2
76.5
73.8
70.9
59.6
45.9
33.4
21.1
11.3
1.5
-19.8
-41.5
-59.6
-79.9
-100.5
-109.4
-124.9
-138.0
-153.4
-168.9
177.8
165.9
155.2
133.4

-37.7
-37.1
-36.5
-35.9
-35.4
-34.9
-34.4
-33.6
-33.2
-32.4
-30.5
-28.6
-27.3
-26.6
-26.0
-25.8
-25.2
-25.7
-26.0
-26.7
-28.4
-31.1
-34.4
-46.0
-40.0
-37.1
-39.2
-37.7
-41.9
-35.4

0.013
0.014
0.015
0.016
0.017
0.018
0.019
0.021
0.022
0.024
0.030
0.037
0.043
0.047
0.050
0.051
0.055
0.052
0.050
0.046
0.038
0.028
0.019
0.005
0.010
0.014
0.011
0.013
0.008
0.017

31.7
25.2
24.9
26.3
30.4
32.6
34.5
35.9
36.8
37.1
35.8
31.0
25.0
18.3
12.6
7.1
-5.3
-22.4
-39.5
-55.9
-73.5
-81.6
-108.3
-147.3
71.0
30.2
-4.9
-8.8
-173.5
161.7

0.692
0.738
0.749
0.752
0.756
0.755
0.755
0.753
0.755
0.753
0.753
0.752
0.768
0.766
0.773
0.779
0.793
0.806
0.809
0.844
0.882
0.896
0.872
0.916
0.877
0.882
0.865
0.864
0.856
0.835

-163.7
-173.2
-177.6
179.3
175.7
173.5
171.4
169.4
167.5
165.6
158.4
150.1
142.3
135.5
131.8
123.3
102.9
84.7
69.9
54.6
37.0
27.1
20.3
7.0
-1.1
-7.5
-19.2
-26.2
-33.6
-42.5

34.4
31.3
29.3
27.8
26.6
25.5
24.7
23.7
23.0
22.2
19.2
16.0
13.4
11.5
10.0
9.4
7.0
5.2
3.2
2.1
1.4
0.1
-1.8
-1.3
-4.4
-6.3
-7.2
-6.9
-4.7
-3.2

Freq
GHz

Fmin
dB

Gamma Opt
Mag

Ang

0.5
0.9
1.0
1.5
2.0
2.4
3.0
3.5
5.0
5.8
6.0
7.0
8.0
9.0
10.0

0.32
0.41
0.43
0.49
0.56
0.61
0.69
0.75
0.95
1.05
1.08
1.21
1.34
1.47
1.60

0.175
0.224
0.235
0.306
0.375
0.428
0.507
0.569
0.738
0.814
0.831
0.907
0.961
0.992
0.996

127.6
143.8
148.3
173.6
-163.6
-147.2
-125.3
-109.3
-72.0
-57.4
-54.2
-40.5
-29.3
-19.3
-8.9

Rn/50
0.05
0.04
0.03
0.03
0.03
0.04
0.08
0.14
0.20
0.24
0.24
0.30
0.60
0.71
1.01

40

Ga
dB
26.45
21.98
21.50
18.55
16.33
15.18
13.86
12.68
10.81
10.64
9.97
9.25
7.78
6.96
4.46

MSG
30

MSG/MAG & |S21|2 (dB)

S11

20
MAG

10
0

S21

-10
-20
-30
0

10

12

14

16 18

FREQUENCY (GHz)

Figure 38. MSG/MAG & |S21|2 vs. and


Frequency at 4.0V/75 mA.

Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmin below 2 GHz have been extrapolated. The Fmin values are based on
a set of 16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin
is calculated. Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of
the gate lead. The output reference plane is at the end of the drain lead.

11

ATF-53189 Typical Scattering and Noise Parameters at 25C, VDS = 5.0V, IDS = 135 mA
Freq.
GHz

Mag.

Ang.

dB

S21
Mag.

Ang.

dB

S12
Mag.

Ang.

S22
Mag.

Ang.

MSG/MAG
dB

0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0

0.544
0.704
0.777
0.813
0.856
0.866
0.872
0.874
0.876
0.880
0.881
0.882
0.879
0.874
0.882
0.889
0.903
0.918
0.948
0.960
0.941
0.946
0.937
0.914
0.951
0.948
0.939
0.948
0.947
0.903

-133.2
-158.7
-169.4
-176.1
178.5
174.5
170.9
167.5
164.1
161.0
150.2
137.1
124.9
112.7
99.5
92.6
78.2
61.3
41.2
24.3
11.8
10.8
0.3
-8.0
-12.1
-20.6
-23.6
-23.1
-24.3
-32.5

31.0
25.6
22.2
19.7
17.7
16.2
14.9
13.9
12.9
12.1
9.3
6.5
4.3
2.3
0.5
-0.7
-3.5
-5.8
-8.2
-10.2
-12.4
-14.6
-16.0
-17.7
-19.2
-21.0
-21.4
-21.1
-18.9
-17.1

35.531
19.023
12.872
9.705
7.687
6.438
5.582
4.939
4.433
4.026
2.910
2.123
1.647
1.304
1.062
0.921
0.669
0.515
0.389
0.308
0.239
0.187
0.158
0.131
0.110
0.089
0.085
0.088
0.114
0.140

110.9
97.1
90.4
85.7
84.4
81.7
79.2
76.5
73.8
70.9
59.6
45.9
33.4
21.1
11.3
1.5
-19.8
-41.5
-59.6
-79.9
-100.5
-109.4
-124.9
-138.0
-153.4
-168.9
177.8
165.9
155.2
133.4

-37.7
-37.1
-36.5
-35.9
-35.4
-34.9
-34.4
-33.6
-33.2
-32.4
-30.5
-28.6
-27.3
-26.6
-26.0
-25.8
-25.2
-25.7
-26.0
-26.7
-28.4
-31.1
-34.4
-46.0
-40.0
-37.1
-39.2
-37.7
-41.9
-35.4

0.013
0.014
0.015
0.016
0.017
0.018
0.019
0.021
0.022
0.024
0.030
0.037
0.043
0.047
0.050
0.051
0.055
0.052
0.050
0.046
0.038
0.028
0.019
0.005
0.010
0.014
0.011
0.013
0.008
0.017

31.7
25.2
24.9
26.3
30.4
32.6
34.5
35.9
36.8
37.1
35.8
31.0
25.0
18.3
12.6
7.1
-5.3
-22.4
-39.5
-55.9
-73.5
-81.6
-108.3
-147.3
71.0
30.2
-4.9
-8.8
-173.5
161.7

0.692
0.738
0.749
0.752
0.756
0.755
0.755
0.753
0.755
0.753
0.753
0.752
0.768
0.766
0.773
0.779
0.793
0.806
0.809
0.844
0.882
0.896
0.872
0.916
0.877
0.882
0.865
0.864
0.856
0.835

-163.7
-173.2
-177.6
179.3
175.7
173.5
171.4
169.4
167.5
165.6
158.4
150.1
142.3
135.5
131.8
123.3
102.9
84.7
69.9
54.6
37.0
27.1
20.3
7.0
-1.1
-7.5
-19.2
-26.2
-33.6
-42.5

34.4
31.3
29.3
27.8
26.6
25.5
24.7
23.7
23.0
22.2
19.2
16.0
13.4
11.5
10.0
9.4
7.0
5.2
3.2
2.1
1.4
0.1
-1.8
-1.3
-4.4
-6.3
-7.2
-6.9
-4.7
-3.2

Freq
GHz

Fmin
dB

Gamma Opt
Mag

Ang

0.5
0.9
1.0
1.5
2.0
2.4
3.0
3.5
5.0
5.8
6.0
7.0
8.0
9.0
10.0

0.36
0.46
0.49
0.59
0.69
0.77
0.88
0.98
1.28
1.44
1.48
1.68
1.88
2.08
2.28

0.266
0.315
0.327
0.388
0.448
0.495
0.563
0.617
0.764
0.830
0.845
0.912
0.960
0.988
0.994

149.9
162.4
165.6
-172.7
-153.0
-138.6
-116.3
-104.9
-70.5
-56.5
-53.4
-39.7
-28.3
-18.3
-8.5

Rn/50
0.05
0.04
0.04
0.04
0.04
0.06
0.12
0.21
0.31
0.37
0.38
0.42
0.84
1.24
1.78

40

Ga
dB
26.51
22.79
22.09
18.92
17.04
15.87
14.50
13.11
11.19
10.10
10.08
9.39
8.78
8.05
4.74

MSG
30

MSG/MAG & |S21|2 (dB)

S11

20
MAG
10
S21
0
-10
-20

10

12

14

16 18

FREQUENCY (GHz)

Figure 39. MSG/MAG & |S21|2 vs. and


Frequency at 5.0V/135 mA.

Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmin below 2 GHz have been extrapolated. The Fmin values are based on
a set of 16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin
is calculated. Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of
the gate lead. The output reference plane is at the end of the drain lead.

12

ATF-53189 Typical Scattering and Noise Parameters at 25C, VDS = 3.0V, IDS = 135 mA
Freq.
GHz

Mag.

Ang.

dB

S21
Mag.

Ang.

dB

S12
Mag.

Ang.

S22
Mag.

Ang.

MSG/MAG
dB

0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.5
2.0
2.5
3.0
3.5
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0

0.544
0.704
0.777
0.813
0.856
0.866
0.872
0.874
0.876
0.880
0.881
0.882
0.879
0.874
0.882
0.889
0.903
0.918
0.948
0.960
0.941
0.946
0.937
0.914
0.951
0.948
0.939
0.948
0.947
0.903

-133.2
-158.7
-169.4
-176.1
178.5
174.5
170.9
167.5
164.1
161.0
150.2
137.1
124.9
112.7
99.5
92.6
78.2
61.3
41.2
24.3
11.8
10.8
0.3
-8.0
-12.1
-20.6
-23.6
-23.1
-24.3
-32.5

31.0
25.6
22.2
19.7
17.7
16.2
14.9
13.9
12.9
12.1
9.3
6.5
4.3
2.3
0.5
-0.7
-3.5
-5.8
-8.2
-10.2
-12.4
-14.6
-16.0
-17.7
-19.2
-21.0
-21.4
-21.1
-18.9
-17.1

35.531
19.023
12.872
9.705
7.687
6.438
5.582
4.939
4.433
4.026
2.910
2.123
1.647
1.304
1.062
0.921
0.669
0.515
0.389
0.308
0.239
0.187
0.158
0.131
0.110
0.089
0.085
0.088
0.114
0.140

110.9
97.1
90.4
85.7
84.4
81.7
79.2
76.5
73.8
70.9
59.6
45.9
33.4
21.1
11.3
1.5
-19.8
-41.5
-59.6
-79.9
-100.5
-109.4
-124.9
-138.0
-153.4
-168.9
177.8
165.9
155.2
133.4

-37.7
-37.1
-36.5
-35.9
-35.4
-34.9
-34.4
-33.6
-33.2
-32.4
-30.5
-28.6
-27.3
-26.6
-26.0
-25.8
-25.2
-25.7
-26.0
-26.7
-28.4
-31.1
-34.4
-46.0
-40.0
-37.1
-39.2
-37.7
-41.9
-35.4

0.013
0.014
0.015
0.016
0.017
0.018
0.019
0.021
0.022
0.024
0.030
0.037
0.043
0.047
0.050
0.051
0.055
0.052
0.050
0.046
0.038
0.028
0.019
0.005
0.010
0.014
0.011
0.013
0.008
0.017

31.7
25.2
24.9
26.3
30.4
32.6
34.5
35.9
36.8
37.1
35.8
31.0
25.0
18.3
12.6
7.1
-5.3
-22.4
-39.5
-55.9
-73.5
-81.6
-108.3
-147.3
71.0
30.2
-4.9
-8.8
-173.5
161.7

0.692
0.738
0.749
0.752
0.756
0.755
0.755
0.753
0.755
0.753
0.753
0.752
0.768
0.766
0.773
0.779
0.793
0.806
0.809
0.844
0.882
0.896
0.872
0.916
0.877
0.882
0.865
0.864
0.856
0.835

-163.7
-173.2
-177.6
179.3
175.7
173.5
171.4
169.4
167.5
165.6
158.4
150.1
142.3
135.5
131.8
123.3
102.9
84.7
69.9
54.6
37.0
27.1
20.3
7.0
-1.1
-7.5
-19.2
-26.2
-33.6
-42.5

34.4
31.3
29.3
27.8
26.6
25.5
24.7
23.7
23.0
22.2
19.2
16.0
13.4
11.5
10.0
9.4
7.0
5.2
3.2
2.1
1.4
0.1
-1.8
-1.3
-4.4
-6.3
-7.2
-6.9
-4.7
-3.2

Freq
GHz

Fmin
dB

Gamma Opt
Mag

Ang

0.5
0.9
1.0
1.5
2.0
2.4
3.0
3.5
5.0
5.8
6.0
7.0
8.0
9.0
10.0

0.34
0.43
0.45
0.53
0.61
0.68
0.78
0.86
1.10
1.24
1.27
1.43
1.60
1.76
1.93

0.225
0.282
0.296
0.362
0.427
0.478
0.551
0.608
0.763
0.832
0.848
0.915
0.964
0.991
0.995

146.2
157.0
160.2
-177.0
-156.3
-141.3
-121.1
-106.2
-70.8
-56.6
-53.5
-39.7
-28.4
-18.5
-8.6

Rn/50
0.05
0.04
0.04
0.03
0.03
0.05
0.09
0.17
0.24
0.28
0.30
0.38
0.74
0.95
1.55

40

Ga
dB
26.30
22.19
22.07
19.00
17.13
15.89
14.59
13.17
11.22
10.16
9.93
9.57
8.78
7.27
3.39

MSG
30

MSG/MAG & |S21|2 (dB)

S11

20
MAG
10
S21

0
-10
-20

10

12

14

16 18

FREQUENCY (GHz)

Figure 40. MSG/MAG & |S21|2 vs. and


Frequency at 3.0V/135 mA.

Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmin below 2 GHz have been extrapolated. The Fmin values are based on
a set of 16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin
is calculated. Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of
the gate lead. The output reference plane is at the end of the drain lead.

13

Device Models, PCB Layout and Stencil Device


Refer to Avagos Web Site: www.avagotech.com/view/rf

Ordering Information
Part Number

No. of Devices

Container

ATF-53189-TR1

3000

13 Reel

ATF-53189-BLK

100

Anti-static bag

SOT 89 Package Dimensions


D
A
D1

H
L

#1

#2

E1

#3
B

B1

#3

#2

#1

e1
BOTTOM

COMMON
DIMENSIONS Millimeters
SYMBOL
A
B
B1
C
D
D1
E
E1
e
e1
H
L

MIN.
1.40
0.44
0.36
0.35
4.40
1.62
2.30
2.13
1.50 BSC
3.00 BSC
3.95
0.90

NOM.
1.50
0.50
0.42
0.40
4.50
1.73
2.50
2.20
1.50 BSC
3.00 BSC
4.10
1.10

MAX.
1.60
0.56
0.48
0.44
4.60
1.83
2.60
2.29
1.50 BSC
3.00 BSC
4.25
1.20

DIMENSIONS Inches
MIN.
0.055
0.017
0.014
0.014
0.173
0.064
0.090
0.084
0.059 BSC
0.118 BSC
0.155
0.035

NOM.
0.059
0.0195
0.0165
0.016
0.177
0.068
0.096
0.087
0.059 BSC
0.188 BSC
0.161
0.038

MAX.
0.063
0.022
0.019
0.017
0.181
0.072
0.102
0.090
0.059 BSC
0.188 BSC
0.167
0.047

Notes:
1. Dimensioning and tolerancing per ANSI.Y14.5M-1982
2. Controlling dimension: Millimeter convertions to inches are not necessarily exact.
3. Dimension B1, 2 places.

14

Device Orientation
REEL

3GX

3GX

3GX

3GX

CARRIER
TAPE
USER
FEED
DIRECTION
COVER TAPE

Tape Dimensions
8.000.10
(0.3150.004)

1.500.10
(0.059+0.004)

2.000.05
(0.0690.004)

4.000.10
(0.1570.004)

1.750.10
(0.0690.004)

5.500.05
(0.2170.002)

12.00.30-0.10
(0.472+0.012-0.004)
+

1.500.25
(0.059+0.010)
0.2920.02
(0.01150.0008)
1.800.10
(0.07090.004)
6 MAX

4.800.10
(0.1890.004)

4.400.10
(0.17320.004)

Dimensions in mm (inches)

For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright 2005-2009 Avago Technologies. All rights reserved. Obsoletes 5989-3893EN
AV02-0051EN - November 6, 2009

Das könnte Ihnen auch gefallen