Sie sind auf Seite 1von 2

Fujitsu Semiconductor Europe Factsheet MB9BD10S/T, MB9B610S/T Series

FM3 TwinMAC Ethernet MCUs


The MB9BD10S/T and MB9B610S/T series belong to Fujitsus FM3 ARM Cortex-M3 based Microcontroller Family. With an operation frequency of up to 144MHz and a very fast and reliable Flash memory, these devices mark the high end of Cortex-M3 based MCUs. Among many other peripherals, two Ethernet MAC channels are implemented. A single Ethernet MAC MCU series, with similar features, is available too: MB9B210S/T Lineup of FM3 TwinMAC Ethernet MCUs
512KB 768KB 1MB FLASH 64KB 96KB 128KB RAM

FM3 TwinMAC Ethernet MCUs


MB9BFD18S MB9BF618S MB9BFD17S MB9BF617S MB9BFD16S MB9BF616S 144pin MB9BFD18T MB9BF618T MB9BFD17T MB9BF617T MB9BFD16T MB9BF616T 176pin CAN CAN CAN

TwinMAC Ethernet Both, MB9BD10S/T and MB9B610S/T series offers 2 channels Ethernet MAC. This feature allows the design of gateway applications. Two network domains can be separated to improve security or to assure a certain bandwidth for sub networks by ltering irrelevant Ethernet frames. Another advantage of a dual channel Ethernet MAC is the possibility to create lineor ring- topologies (daisy chaining) without separate switches.
Daisy Chain Gateway Company network or Internet Embedded System

PHY

PHY

Feldbus Gateway

Embedded Drive

Embedded System

PHY

PHY

PHY

PHY

CAN0

PMS M

CAN1

MB9BFD18T 144MHz Embedded System with Gateway Functionality

MB9BFD18T 144MHz

MB9BFD18T 144MHz PHY PHY

Ethernet - MAC Features 2 channels Ethernet MAC Single channel Ethernet MAC MCUs available too. Compliant with IEEE802.3 specication 10Mbps / 100 Mbps data transfer rates supported MII/RMII for external PHY device supported. Full-Duplex and Half-Duplex mode supported. Wake-ON-LAN supported Built-in dedicated descriptor-system DMAC Built-in 2Kbyte Transmit FIFO and 2Kbyte Receive FIFO. Compliant to IEEE1588-2008(PTP)

PHY

Page 1 of 2

Factsheet Fujitsu MB9BD10S/T, MB9B610S/T Series

MCU Features
RC oscillator +/-2%

High Performance High Speed Flash: True zero wait state Flash operation at 72MHz, prefetch buffer for zero wait state operation at 144MHz Wide range of power supply voltages supported: 2.7 V to 5.5 V High Quality Flash Memory Highly reliable ash memory: 100,000 write/erase cycles, up to 20 years data retention Flash security function Functinal Safety Internal, trimmed RC oscillator Clock Supervisor Two stage (interrupt and reset), programmable LVD (Low Voltage Detector) CRC hardware module MPU (Memory Protection Unit) Programmable Emergency Stop Input for Motor Control PWM Connectivity Up to 2 channels CAN Controller Full Speed USB Host & Function exible resource pin relocation Multifunction serial (UART, SIO, SPI, and I2C) Advanced Peripherals 3 independent high-speed 12-bit A/D converters, 32channels 3 ch Multifunction timer (for motor control) 3 Quadrature Decoder Units 8/16bit external bus interface Debug Interface JTAG, SWJ- and Trace Debug Interface

Clock Supervisor Subclock (option) Low Voltage Detector 2ch Memory Protection Unit SWJ/TPIU/ETM/ Debug Ports

ARM Cortex-M3 CPU 144MHz (max) 2.7 - 5.5V


Main CLK: SUB CLK: MAIN RC CLK: SUB RC CLK: 4MHz 32kHz 4MHz 100kHz

OCU x 6ch ADT x 3ch Multi Function Timer 3ch PPG 9ch Base Timer 16ch Dual Timer

ICU x 4ch FRTim x 3ch Waveform Generator QDU 3ch External IRQs 16ch + NMI DMA 8ch CRC Hardware Watchdog

MFS(UART/SPI/I 2 C) 8ch USB FS Host+Function 2ch CAN (32 MSB) 2ch Ethernet MAC 10/100MBit 2ch External Bus Interface 8/16 Data, 19*1/25*2 Addr, 8CS

Package: LQFP144*1, LQFP176*2 MB9BFD16S/T MB9BFD17S/T MB9BF618S/T


*1 *2

Watch Counter SRAM 64K SRAM 96K SRAM 128K Resource Pin Relocation 12-bit ADC 12-bit ADC 12-bit ADC 20ch*1 32ch*2

Flash 512K Flash 786K Flash 1MB

MB9BD10S: LQFP144 MB9BD10T: LQFP176

Block diagram of the MB9BD10S/T series

Development Tools The Fujitsu FM3 family is supported by market leading tool chain suppliers like IAR Systems, Keil, Code Sourcery and others. These companies offer enhanced IDEs (integrated development environments) A free of charge OpenSource GNU/Eclipse based tool chain is available too. Diverse middleware components are offered from Fujitsu, as well as 3rd parties. In many cases the user can choose between commercial and free of charge solutions. The offering includes Realtime Operating Systems, Low Level Peripheral Libraries and Protocol Stacks. Fujitsu Middleware Components Peripheral Library USB Library Functional Safety Self Test Libraries (IEC60730 - class B, IEC61508 SIL2) Motor Control Platform Capacitive Touch Library Ethernet Low Level Driver Example implementations uIP, lwIP TCP/IP stacks

Evaluation Boards Hardware Evaluation Boards for the FM3 Ethernet MCUs are provided by Fujitsu and partners. SK-FM3-176PMC-ETHERNET Features Microcontroller MB9BFD18T 2x Ethernet connectors 2x USB-Host (Type-A connector) 1x USB-Device (Type-B connector) 1x High-speed CAN-Transceiver (SUB-D9 connector) 1x UART-Transceiver (SUB-D9 connector) 1x USB to serial converter (Type-B connector) JTAG-and Trace Interface each on a 20 pinheader 2x LED-Display (7-Segment) All 176 pins routed to pin-header On-board 5V and 3V voltage regulators, Power-LED 3 x motor control connector

Partner Middleware Components USB Library Ethernet TCP/IP stacks and Application Layers CANopen protocol stacks

Starterkit SK-FM3-176PMC-ETHERNET
All company and product trade marks and registered trade marks used throughout this literature are acknowledged as the property of their respective owners.

mcu.fseu@de.fujitsu.com http://emea.fujitsu.com/fm3
FSEU-FM3-28FEB2012

Page 2 of 2

Das könnte Ihnen auch gefallen