Beruflich Dokumente
Kultur Dokumente
QUESTION BANK ALL ARE 10 MARK QUESTIONS CONIC SECTIONS 1. Draw an ellipse when the distance of focus from the directrix is equal to 40mm and eccentricity is 3/5. 2. Draw a hyperbola when the distance of focus from the directrix is equal to 35mm and eccentricity is 4/3. 3. The vertex and the focus of a hyperbola are at distances of 20 mm and 50mm respectively from a fixed straight line. Draw the tangent and hyperbola and a normal at any point on it. 4. A ball thrown up in the air reaches a maximum height of 50m.The horizontal distance traveled by the ball is 80m.Trace the path of the ball and name it. Find the direction of motion of the ball with reference to the horizontal when the ball has reached a height of 40m during the first half of the travel. 5. Draw a cycloid formed by a rolling circle 50mm in diameter. Use 12 divisions. Draw a tangent and a normal at a point 30mm above the directing line. 6. A circle of 45mm diameter rolls along the inside of another circle of 180mm. Draw the path described by a point on the circumference of the rolling circle of one complete revolution. Draw a tangent and normal at a point on the curve.
ISOMETRIC PROJECTIONS 1.A cylinder slab 75mm diameter and 45mm thick is surmounted by a cube of 38 mm side, on the top of the cube rests the square pyramid of altitude of 38mm and side of base 25mm.The axis of the solid are in the same straight line. Draw the isometric projection of the set up. 2. A cube of size 40mm is resting on the ground on one of its faces surmounted centrally a sphere of radius 30mm Draw the isometric projection of the set up. 3. A frustum of the square pyramid of bottom base 30mm side and top face 45mm side and height 30mm, is placed centrally over a square prism of side 45mm and axis 10mm On the top of the frustum, a sphere of radius 40mm is placed centrally. Draw the isometric projection of combination of solids. 4. A square prism of base side 65mm and height 16mm is resting on ground. A frustum of cone base diameter 60mm and top face diameter 40mm and height 75mm is centrally placed over the prism. A hemisphere of radius 40mm is placed over the frustum of the cone, Draw the isometric projection of the setup.
5. Three square rods of 25 x 25 mm cross section and length 8Omm, and 50mm are so nailed together that they form the letter H .Draw the isometric projection of H.
4. A hexagonal pyramid of base side 30mm and axis height 80mm is lying on the ground on its base with a base edge parallel to the VP. It is cut by the plane, perpendicular to the VP, inclined at 45 degree to the HP and meets the axis at a point 25mm from the base .Draw the sectional plan and true shape of the section. 5. A cone diameter 40 mm and axis 50 mm rests on its base on HP. An cutting plane inclined at 45 degree to HP cuts the cone and passes through a point on axis which is 20mm above HP . Draw the sectional plan and elevation and true shape of the section. 6. A cone of 50 mm diameter and axis 70mm lying on the ground vertically. A plane, which is perpendicular to the VP and parallel to and 12 mm away from one of the generators of the cone, cuts it. Draw the sectional plan and true shape of the section. 7. A cone of diameter 40mm, height 65mm is lying on the ground with one of its generators parallel to VP and on the HP. Draw the projections 8. A cone of diameter 50mm, height 70mm is lying on the ground on one of its base point with its axis inclined at 40 degree to HP and parallel to VP. Draw the projection. 9. Draw the projections of a cone of diameter 40mm ,height 70mm is lying on the ground on one of its base points with a generator perpendicular to HP