Sie sind auf Seite 1von 2

UT5 UNIMOUNT 150 LUMINAIRE

Low Bay, Enclosed Surface Mount Optical Series


APPLICATIONS For 8-20 ft. (2-6 meter) applications in factories, canneries, textile, metal, chemical, ruger, cement and other industrial applications SPECIFICATION FEATURES 1598 Listed Suitable For Damp Locations 1598 Listed for metal halide lamps in polymeric lamp containment barriers Listed to Canadian standards and codes UV stabilized injection molded prismatic refractor for low brightness In-line EZ Connect plug-in adapter port allows for: hook/loop, cord & NEMA plug plug-in modular wiring systems plug-in fuse kits Symmetrical heavy-duty die-cast aluminum ballast housing with electrocoat gray or white polyester paint finish Threaded slide-in mounting adapter for easy mounting 55 C ambient, standard (except 40 C for 250 watt) Alzak finish on reflector Safety chain provisions Mogul base socket -E39 standard Shipped as components: Ballast, Optical Magnapack available for ballast Pulse start system for metal halide available. See Page I-155

EZ Connect

With

TM

ORDERING NUMBER LOGIC


UNIMOUNT INDOOR LIGHTING
UT5 UT5
G G
25 25

M M
LIGHT SOURCE X M = MH K = Ceramic MH S = HPS P = Pulse Start MH Note: Lamp is vertical base up. Lamp not included.

0 0
VOLTAGE

A A

EA EA

AG AG

11 11

B B
OPTIONS X B = Time Delay Automatically Switched Quartz C= Patrol Intermittent Automatic Lamp Shut-Off For Metal Halide Lamps (see opposing page) F = Fusing (Not available with W option) G = Secondary Wiring Access. 7/8 in. dia. knockout(Not available with W option) H = Charcoal Filtering Gasket (not available with wet location) K = Encapsulated Ballast (For use with 250 watt Auto Reg Ballast only) Q = Non-Time Delay Automatically Switched Quartz R = Non-Switched Quartz. T = E40 / European Socket W = Wet Location (For use with Mounting Code 15 and 67 only) Y = Solo Bilevel Port (See page I-126) Note: See page I-128 for Accessory Index and Descriptions. Note: See page I-153 for explanation of Options.

PRODUCT COLOR WATTAGE IDENT XXX X XX UT5 = G = Gray 07 = 70 Unimount Electro 10 = 100 150 Coat 15 = 150 Luminaire W = White 17 = 175 Polyester 25 = 250 Powder

BALLAST OPTICAL PHOTOMETRY MOUNTING TYPE CODE CODE CODE X X XX XX XX See Ballast EA = Enclosed 60Hz XX = Select XX = Select Code Below Acrylic Refractor Code Below 11 = Pendant mounting 0 = 120/208/ Selection 240/277 Table 13 = Provision for Slide-on Primary Electrical MULTIVOLT A =Autoreg ES = Enclosed HID Disconnect. Order TWOBP Box (Thru Feed Advanced ST 1 = 120 D= Capability Only) Separately. Acrylic Refractor 2 = 208 Systems 3 (Not available with W option) WA = Acrylic 3 = 240 Bilevel 14 = Provision for Slide-on Primary Electrical 4 = 277 Autoreg Refractor with Disconnect. (Pendant and Thru Feed Inside & Outside 5 = 480 (See Capability). Order PED Box Separately of Reflector D = 347 Technical Painted White (Not available with W option) F = 120X347 Section) 15 = Prewire with EZ-Loop, Cord and Plug Part WS = Advanced T = 220 H = HPF of Power Hook. Order Receptacle/Hook Reactor or ST HID Acrylic Box Separately. (Not CSA/CUL) with Inside & 50Hz Lag 31 = Prewire with EZ-Hook, 3-ft (0.9 Meters) #16/3 Outside of 6 = 220 M= Cord, and Nema Plug Reflector Painted R = 230 Mag-reg White 33 = Prewire with EZ-Loop, 3-ft (0.9 Meters) #16/3 Y = 240 K= Cord, and Nema Plug (Order locking G = 380 Hot restart receptacle hook box separately.) (Contact 67 = Pendant, Nut and Hanger Hub Mounting. factory) (For use with D or W, Wet Locations Option, only) (See pages I-153 and I-154 for details) MODULAR PREWIRE 41 = ACS with 3-ft (0.9 meter) cord & EZ-Hook 69 = ACS with 6-ft (1.8 meter) cord & EZ-Hook 43 = ACS with 3-ft (0.9 meter) cord & EZ-Loop 70 = ACS with 6-ft (1.8 meter) cord & EZ-Loop 51 = Sentinel with 3-ft (0.9 meter) cord & EZ-Hook 71 = Sentinel with 6-ft (1.8 meter) cord & EZ-Hook 53 = Sentinel with 3-ft (0.9 meter) cord & EZ-Loop 72 = Sentinel with 6-ft (1.8 meter) cord & EZ-Loop Note: ACS = Flex 3 + Sentinel = EZ Flex II (FSC) F4 = GELS Bay Flex with 6 ft cord & Hook Bay Flex GE-LT (no phase selection required) F5 = GELS Bay Flex with 6 ft cord & Hook Bay Flex GE HLA (A phase) F6 = GELS Bay Flex with 6 ft cord & Hook Bay Flex GE HLA (B phase) F7 = GELS Bay Flex with 6 ft cord & Hook Bay Flex GE HLA (C phase)

PHOTOMETRIC SELECTION TABLE (Continued on next page)


EA, ES, EP OPTICAL - Enclosed Optical
Wattage 175 250 150 70 100 150 (55V) 250 Light Source MH, P MH, P P (MH) HPS HPS HPS HPS Spacing Criteria 1.7 1.7 C/F 1.8 1.8 1.8 2.0 Socket Position G G C/F G G G F Photometric Curve 177017 177017 C/F 177016 177016 177016 177162 Optical Code EA,ES EA,ES C/F EA,ES EA,ES EA,ES EA,ES Photometry Code AG AG C/F AG AG AG AF AG AG C/F AG AG AG AF

175 MH, P 1.7 G 178824 WA, WS WA, WS 250 MH, P 1.7 G 178824 150 P (MH) C/F C/F C/F C/F WA, WS 70 HPS 1.7 G 178822 WA, WS 100 HPS 1.7 G 178822 WA, WS 150 (55V) HPS 1.7 G 178822 WA, WS 250 HPS 1.7 F 178823 Note: C/F = Call Factory Note: See page T-34 for Alternative lens material explanation

WA, WS, WP OPTICAL - Optical with Inside & Outside Reflector White

GE Lighting Systems, Inc.


I-64/2005 www.gelightingsystems.com

Most commonly ordered

UT5 UNIMOUNT 150 LUMINAIRE


Low Bay Enclosed DIMENSIONS For wet location dimensions 1.72 inches (44mm) must be added to overall height NOTES See explanation on Optical Flexibility Page I-5. See References. REFERENCES See Page I-128 for start of Accessories. See Page I-142 for Component Ordering Logic. See Page I-153 for Explanation of Options and Other Terms Used. FIXTURE DIMENSIONS
3/4 in. NPSC Thread

DATA
Approximate Net Weight Ballast and Optical lbs 33 kgs 15

UNIMOUNT INDOOR LIGHTING

BALLAST SELECTION TABLE


Ballast Type / Voltage 60HZ 120, 208 Light 240, 277 Wattage Source Multivolt 480 347 70 HPS H,K*** H,K*** H 100 HPS H,K*** H,K*** H 150(55V) HPS H,K*** H,K*** H 250 HPS A A A 70* Cer, MH H H H 100* Cer, MH H H H 70* MH H H H 100* MH H H H 175 MH A A A 250 MH A A,D A,D PULSE START METAL HALIDE LIGHT SOURCE BALLAST SELECTION TABLE 150* P (MH) N/A H** H 175 P (MH) N/A A A 250 P (MH) A A,D A,D 50HZ 220 N/A N/A A,H A,H H H N/A N/A A A 220 M H,M H A,H,M N/A N/A N/A N/A N/A N/A 230 N/A H,M H A,H N/A N/A N/A N/A N/A N/A N/A N/A N/A 240 N/A H H A,H N/A N/A N/A N/A N/A N/A N/A N/A N/A 380 N/A N/A N/A M N/A N/A N/A N/A N/A N/A N/A N/A N/A

120 x 347 H H H A N/A N/A N/A N/A A A

N/A N/A N/A A N/A N/A A N/A N/A

C OPTION Patrol - Intermittent Lamp Shut-Off For Metal Halide Lamps Automatically shuts fixture off for 15 minutes every 120 hours of operation. To conform to lamp manufacturers recommended safe lamp operation. Available on the following offerings: 175 -400 watt Metal Halide, pulse Metal Halide, Ceramic Metal Halide Auto Reg (CWA) or Mag Reg ballasts 60 hz and corresponding voltages (as shown in table) only Note: Used with Gen 6 ballast housing adds 4.96 to overall height.

NOTE: N/A = Not Available * Medium base socket (Lamp not included) ** 480 Volt not available *** Hot Restart supplied in Large Ballast Housing contact factory CANADIAN NOTES: 1. "A", Autoreg, and "D", Bilevel Autoreg available 120, 277 or 347 volts only 2. 208, 240, and 480 volts require CWI ballast. Use "G" when available. Contact factory for all others. 3. Multivolt not available. 4. "K" Hot Restart not available.

GE Lighting Systems, Inc.


www.gelightingsystems.com 2005/I-65

Das könnte Ihnen auch gefallen