Beruflich Dokumente
Kultur Dokumente
www.goplextor.com
SSD
SATA 6Gb/s
The new Plextor SATA 6Gb/s SSD, the M3 Pro performance series, provides read/write speeds up to 540/450 MB/s in sequential mode and up to 75,000/69,000 IOPS in random mode. The M3 Pro uses high-grade 24nm toggle flash, and 7mm height suitable for ultra-slim notebooks. The M3 Pro is Plextors third SSD release to feature exclusive firmware with True Speed technology, which includes Plextors proprietary Bad Block Management, Global Wear Leveling, and Instant Restore Technologies.
True Speed is designed to prevent drastic drops in read/write speeds that normally occur with SSDs after prolonged use or when data becomes heavily fragmented. True Speed technology will maintain the M3 Pros high performance and read/write speeds at like-new levels throughout the life of the drive. Plextor strives to exceed industry standards with rigorous benchmark testing. Before leaving the factory, each Plextor SSD is put through a 20-hour high temperature burn-in test and an intense simulation of real world environments. As a result, Plextor SSDs have a 0.59% average annual failure rate, which is one of the lowest in the industry. M3 Pro SSD uses the latest SATA 6Gb/s (SATA III) interface, Marvells server-grade controller chip, and Toshiba 24nm Toggle NAND flash. Also supported by the flash is a 1.8V power mode, providing the M3 Pro with extremely low-power consumption making it a very eco-friendly product. The M3 Pro offers an affordable upgrade solution to transform your existing desktop or laptop into a high efficiency and fast performance device. The M3 Pro is available in 128GB, 256GB, and 512GB capacities.
Server-grade Marvell 88SS9174 controller chip for read/write speeds of up to 540MB/s and 450MB/s in sequential mode, and 75,000 and 69,000 IOPS for random read/write operations at 4K file size The M3 Pro supports SATA 6Gb/s and is backward compatible with SATA 3Gb/s and SATA 1.5Gb/s The latest 24nm synchronous MLC NAND flash modules with Toggle mode support from Toshiba further enhance product reliability The DDR3 DRAM cache transfers data faster and helps extend lifetime of the product
Includes Disk Cloning & Backup Utility Software Includes 3.5 mounting bracket with screws
Never co m p ro m i s e.
Performances
Model Capacity Sequential Read (MB/s) Sequential Write (MB/s) Random Read (IOPS 4K) Random Write (IOPS 4K) BUFFER Memory (DDR3) PX-128M3P 128GB 535 350 75,000 69,000 256MB PX-256M3P 256GB 540 420 75,000 68,000 512MB PX-512M3P 512GB 535 450 56,000 34,000 512MB
General Specification
Power Consumption (Typical) Temperature (Operating) Temperature (Non-operating) Shock Vibration (Operating) MTBF Warranty 0.1W (Idle); 5W (Active) 32 F to 158 F (0 C to 70 C) -40F to 185 F (-40 C to 85 C) 1,500G/0.5 ms 7~800Hz, 2.17G (RMS) 1.5 million hour 5 year
Compatibility
Operating System Microsoft Windows Family Linux Mac OS UL, CE, BSMI, WHQL, RoHS Supports TRIM, SMART, NCQ, ATA/ATAPI-8 Supported SATA Revision 3.0 compliant, supports SATA 6/3/1.5 Gb/s Supported
Agency Approval Command Set Data Encryption SATA Interface Firmware Upgrade
Other
Package Contents
Drive Software Accessory 2.75 x 0.3 x 4.0 inch 1.94 ~ 3.53 oz Plextor Solid State Drive NTI Disk Cloning & Backup Utility 3.5 Mounting bracket with mounting screws
Literature