Beruflich Dokumente
Kultur Dokumente
Series 370
Series 380
Multi-Way Ladders
Bon Ls Multi-Way ladder is the best designed and constructed ladder of its type on the market. A ladder of exceptional strength, stability and rigidity. For use as: Stepladder Trestle ladder Stairway ladder Extension ladder
Model 387
R-370
MULTI-WAY LADDERS
Multi-use moulded tool-tra-top Sturdy front & rear rails for rigidity & stability Extra deep 3" (7.6 cm) anti-slip steps Solid aluminum rivets in front prevent step loosening Horizontal braces on rear every 12" (30.5 cm) Diagonal braces on front & rear double on bottom step Large no-skid foot pads Pinch-proof spreaders on 5', 6', 7' and 8' ladders
Model 374 375 376 377 378 310 312 Nominal Height 4' 5' 6' 7' 8' 10' 12' (1.2 m) (1.5 m) (1.8 m) (2.1 m) (2.4 m) (3.0 m) (3.6 m) Width 18 1/2" 20" 21 1/2" 23" 24 1/2" 27 1/2" 30 1/2" (47 cm) (51 cm) (55 cm) (58 cm) (62 cm) (70 cm) (77 cm) Spread Mass
Extruded channel type side rails. Serrated slip resistant extruded steps and rungs Heavy duty spreader bars, top, and extension rung rest Designed for two people when used as a trestle ladder Flared base for stability, plus bracing on bottom two steps Adjustable every 12" (30.5 cm) for stairway ladder Non-skid vinyl feet on both sections and end caps to protect walls Exclusive ALFLO TWIST-PROOF rung joints on extension Pinch-proof Spreaders on all Mult-Way ladders
Model 386 387 388 Stepladder Height 6' 7' 8' (1.8 m) (2.1 m) (2.4 m) Extension Length 9' (2.7 m) 11' (3.3 m) 13' (3.9 m) Mass 9.8 kg 11.2 kg 12.3 kg
30" (76 cm) 4.1 kg 36" (91 cm) 5.0 kg 42" (107 cm) 5.8 kg 48" (122 cm) 7.0 kg 54" (137 cm) 8.3 kg 67" (170 cm) 11.7 kg 80" (203 cm) 14.5 kg
Si vous dsirez cette brochure en franais, prire vous adresser notre bureau le plus proche.
EXTENSION LADDERS
Rib reinforced interlocking channel side rails 3" x 1" (7.6 cm x 2.5 cm) Pressure zinc die cast gravity ladder locks with stainless steel springs 1 1/2" (3.8 cm) dia. high impact polystyrene pulley on heavy duty extruded aluminum bracket aligns rope in direction of pull 1/4" (6.3 mm) dia. mono-filament polypropylene rope 5 1/4" (13.3 cm) dia. polyethylene wheels with P.V.C. tires, assist raising and lowering the ladder and prevent wall marring Wheels mounted on solid aluminum axles
Nominal Length 16' (4.9 m) 20' (6.1 m) 24' (7.3 m) 28' (8.5 m) 32' (9.7 m) 36' (11.0 m) 40' (12.2 m) Working Length 13' (3.9 m) 17' (5.2 m) 21' (6.4 m) 25' (7.6 m) 28' (8.5 m) 32' (9.7 m) 36' (11.0 m)
Model 5720-2
Rib reinforced channel side rails 3" x 1" (7.6 cm x 2.5 cm) Ladder top protected with double rivetted high density polyethylene end caps
Nominal Length 16' (4.9 m) 20' (6.1 m)
Model
5716 5720
Due to product improvements and other factors, specifications and details are subject to change without notice.
GRADE
Load Grade Projected Use 1 2 3 Construction and Industrial Tradesman and Farm Household
Be sure to choose the right length ladder. First measure the distance from the ground to eaves and then check this chart for the correct size. This chart allows for the proper overlap and a 3 ft. extension of the ladder above the eaves as required by the minimum safety codes.
Buy this length Ext. Ladder 16' (4.8 m) 20' (6.0 m) 24' (7.3 m) 28' (8.5 m) 32' (9.7 m) 36' (10.9 m) 40' (12.2 m) Max. Working Length 12' (3.9 m) 16' (5.1 m) 20' (6.4 m) 24' (7.6 m) 28' (8.5 m) 32' (9.7 m) 35' (10.9 m)
Length Chart
Buy a stepladder three feet shorter than the highest point you have to reach. This places the paint/tool tray at convenient working height.
From 17' (5.1 m) to 21' (6.4 m) From 21' (6.4 m) to 25' (7.6 m) From 25' (7.6 m) to 28' (8.5 m) From 28' (8.5 m) to 31' (9.4 m)
NOTE: Codes forbid standing on the top or first step below the top of a stepladder. Otherwise you could lose your balance.
For additional safety information Ladder Safety a guide to selecting, purchasing and using ladders is available from Bon L Canada.
Rung Joints
Patented 3-piece ALFLO rung joint is formed by compressing ferrule to lock heat-treated rung and rail together, producing a tempered joint, making the ladder Twist-Proof.
Joints exceed minimum safety standards many times and cant turn or work loose.
July 2003