Beruflich Dokumente
Kultur Dokumente
y x2 ) 2a
2k(x
ka
x a
y 0.5 in.
2 in.
1 x
2 in.
12 in.
2 in.
y C
955. Locate the distance y to the centroid of the members cross-sectional area.
6 in.
*972. Locate the center of mass (x, y, z) of the homogeneous block assembly.
250 mm 200 mm
100 mm
991. Determine the surface area and volume of the solid formed by revolving the shaded area 360 about the z axis.
z 75 mm 50 mm
300 mm
400 mm
75 mm
50 mm
*992. The process tank is used to store liquids during manufacturing. Estimate both the volume of the tank and its surface area. The tank has a flat top and a thin wall.
3m
3m
6m
4m
9106. The symmetric concrete gravity dam is held in place by its own weight. If the density of concrete is rc = 2.5 Mg>m3, and water has a density of rw = 1.0 Mg>m3, determine the smallest distance d at its base that will prevent the dam from overturning about its end A. The dam has a width of 8 m.
1.5 m
9m
A d
*9124. The steel plate is 0.3 m thick and has a density of 7850 kg>m3. Determine the location of its center of mass. Also compute the reactions at the pin and roller support.
y y2 2x 2m
x A 2m y x B 2m
9125.
3 in.
*9128. The load over the plate varies linearly along the sides of the plate such that p = 2 [x(4 - y)] kPa. Determine 3 the resultant force and its position (x, y) on the plate.
p 8 kPa 3m y
4m x
9129. The pressure loading on the plate is described by the function p = 5-240>(x + 1) + 3406 Pa. Determine the magnitude of the resultant force and coordinates of the point where the line of action of the force intersects the plate.
100 Pa
y p 300 Pa
6m 5m x