Sie sind auf Seite 1von 2

Dimensions

backhoe loader
12 4 (3762) 9 1 (2770)

66 7 3 (2210) 7 7 (2311) 6 11 (2098) 1 5 (453) 7 0 (2130) 24 1 (7338) as shown 20 5 (6218) stowed 4 3 (1291)

20

Specifications
Cab
Low internal noise level of just 78 dBA Large areas of tinted glass allow superb all round visibility Spacious interior giving ample room to the operator at both work stations Low line curved hood enhances forward visibility Hazard warning and full lighting controls Adjustable tilt steering wheel to suit all operating styles Instrumentation easy to clean Heavy duty easy to clean rubber floor mat Twin externally mounted rear view mirrors Wide door opening, self-cleaning steps and large grab rails make access easy Full depth rear window for comprehensive visibility to the trench Fully adjustable suspension seat with lap belt maximises operator comfort

Audible/visual warning covering park brake, transmission oil temp, engine coolant, engine oil Visual indication on 4wd engagement, hazard lights, main beam,battery charge, direction pressure, hydraulic oil filter and air cleaner indicators and front / rear wipers In the raised position the rear window provides ventilation yet gives protection from rain Vandal covers for the instrumentation consoles on the ROPS canopy Air re-circulation enables quick warm up on cold days Cab is ROPS and FOPS approved for operator comfort Well laid out controls for ease of operation Touch operated switches for operator convenience Extensive stowage facilities ROPS canopy version available Door windows can be partially or fully opened for maximum ventilation Adjustable rear working lights Two front and two rear defrosting vents Powerful 3 speed heater supplies a further two forward and three rear vents Air conditioning option available

Effective Date: 01 November 2008. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operators Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operators Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. 2008 Terex Corporation. Printed on material using 55% recycled fibre from both pre and post-consumer sources, together with 45% virgin ECF fibre from sustainable forests. 820 1108-EN

820
Specification Operating Weight Gross Engine Power Dig Depth

Benefits Engine emission compliant to EU Stage 3A, US EPA Tier 3 500 hours service period

7,165 kg 70 kW (93.8 hp) 4,471 5,815 mm

4 speed synchro shuttle gearbox High transport speed for reduced highway journey times Foot operated differential lock for ease of operation High capacity long life sealed wet disc brakes Selectable 2 or 4 wheel braking

Terex United Kingdom Limited Central Boulevard, ProLogis Park, Coventry, England CV6 4BX Tel +44 (0) 2476 339400 Fax +44 (0) 2476 339500 Email enquiries@terexce.com www.terex.co.uk

Closed centre flow sharing hydraulics Cleanable hydraulic oil coolers

820

Specification
Engine Engine Model Capacity Rated Speed Gross Power @ 2200 rpm Cert. Rating to UN/ECE R120 Derived Net Rating @ 2200 rpm to ISO/80/1269/EC Max Torque @ 1400 rpm UN/ECE R120 ISO 80/1269/EC
*Nominal Non-Certified Values

Total Machine Weight 1104D-44T 269 (4.4) 3 (ltr) 2200 rpm 70 (93.8*) kW(hp) 65.7* (88.1*) kW(hp) 392 (289*) Nm(lbfft) 372* (274*) Nm(lbfft) Total Machine Weight Add/Delete 7 in 1 Multi - Purpose 7 in 1 Multi - Purpose Fork Kit Deep Dig Dipper ROPS Frame Axles and Brakes Axle Ratings Front kg (lbs) Front: 12.5 / 80x18 12.5 x 18 Rear: 16.9 x 28 16.9 x 30 Reverse: 6.1 (3.8) Km/h (mph) 9.9 (6.2) Km/h (mph) 20.6 (12.8) Km/h (mph) 38.9 (24.2) Km/h (mph) Rear kg (lbs) Hydraulics Main Pump @ 2200 rpm Secondary Pump @ 2200 rpm System Main Relief Setting @ 2200 rpm Unloader Settings @ 2200 rpm Combined flow Electrics Standard Shovel 7-in1 Shovel 4580 (10097) kgf (lbf) 4345 (9597) kgf (lbf) 3058 (6742) kg (lb) 12 volt system Battery step mounted for good access Low maintenance battery 100 A alternator Connectors sealed against water and dust 33 circuit fuses Standard Shovel 7-in1 Shovel 2311 (7 7) mm (ft) 1.0 (1.32) m3 (yd3 ) 730 (1606) kg (lb) 25 circuit relays Battery isolator Forks Fork Length Section Width Capacity 2.94ft3 (83ltrs) 4.37ft3 (124ltrs) 6.51ft3 (184ltrs) 8.22ft3 (233ltrs) 8.74ft3 (248ltrs) 11.03ft3 (312ltrs) 8.0ft3 (220ltrs) 10.0ft3 (300ltrs) 4.41ft3 (125ltrs) Weight 207lb (94kg) 247lb (112kg) 295lb (134kg) 295lb (143kg) 342lb (155kg) 390lb (177kg) 320lb (145kg) 388lb (176kg) 353lb (160kg) Assembly Weight Max. Operating Height Reach at Ground Level Reach at Full Height S.W.L. At 500mm Load Centre Turning Circles Over Tyres Without Brakes With Brakes
Depending on tyre size

Working Ranges
15763 (7165) lb (kg) +726 (330)lb (kg) +330 (150) lb (kg) +477 (217) lb (kg) -422 (192) lb (kg)
C

Tyres 12.5 x 18 16.9 x 28

SAE J43 6207 (13655) 6155 (13541)


S V P O N

Q T E

Transmission Tyres

Travel Speeds 1st 2nd 3rd 4th Loader Performance Shovel Breakout Arms Breakout Lift Capacity To Full Height Loader Attachments Width Capacity Weight Backhoe Attachments Attachments Width 12in (305mm) 18in (450mm) 24in (600mm) 24in (600mm) 30in (750mm) 36in (900mm) 60in (1525mm) 72in (1830mm) 36in (900mm)

Forward: 5.8 (3.6) Km/h (mph) 9.4 (5.8) Km/h (mph) 19.6 (12.2) Km/h (mph) 37.0 (23.0) Km/h (mph)

17.7/80 gpm (lpm) 13.7/62 gpm (lpm) 3250/225 psi (bar) 3000/207 psi (bar) 160 l/min Capacities Fuel Tank Engine Coolant Engine Oil (inc. Filter) Transmission Rear Axle Front Axle (4WD) Hydraulic System 130 (29) ltrs (gals) 16.0 (3.5) ltrs (gals) 8.5 (1.9) ltrs (gals) 15.0 (3.3) ltrs (gals) 17.5 (3.9) ltrs (gals) 12.5 (2.7) ltrs (gals) 143 (31.7) ltrs (gals)
B A U R

4756 (10485) kgf (lbf) 4685 (10329) kgf (lbf) 3449 (7604) kg (lb)

2311 (7 7) mm (ft) 1.0 (1.32) m3 (yd3 ) 400 (880) kg (lb)

Backhoe Dimensions Standard Dipper 1067 (3 6) mm (ft) 80 (3) mm (ins) 150 (330) kg (lb) 3097 (10 2) mm (ft) 2697 (8 10) mm (ft) 2232 ( 7 4) mm (ft) 1000 (2204) kg (lb) A Dig Depth Maximum SAE 2ft Flat Bottom SAE B Reach - Ground Level to Slew C Loading Reach D Operating Height E Loading Height SAE Max Load Height F Maximum Straight Wall Dig Depth G Bucket Rotation Total Side Shift Stabiliser Spread Max Levelling Angle 4471 (14 8) mm (ft) 4455 (14 7) mm (ft) 5730 (18 10) mm (ft) 1996 (6 7) mm (ft) 5659 (18 7) mm (ft) 3553 (11 8 ) mm (ft) 3871 (12 8) mm (ft) 2602 (8 6 ) mm (ft) Deep Dig Dipper Ret 4471 (14 8) mm (ft) 4455 (14 7) mm (ft) 5730 (18 10) mm (ft) 1996 (6 7) mm (ft) 5659 (18 7) mm (ft) Ext 5815 (19 1) mm (ft) 5804 (19 1) mm (ft) 7020 (23 1) mm (ft) 2924 (9 7) mm (ft) 6637 (219) mm (ft)

Loader Dimensions Standard 7 Shovel


2708 (8 11) mm(ft) N Dump Clearance at 45 Dump Height (Fully Dumped) 2629 (8 8) mm(ft)

7-in-1 Shovel
2708 (8 11) mm(ft) 2629 (8 8) mm(ft) 3319 (1010) mm(ft 3550 (11 8) mm(ft) 352 (12) mm(ft) 1622 (5 4) mm(ft) 1282 (4 3) mm(ft) 829 (2 9) mm(ft)

O Loadover Height P Hinge Pin Height Q Pin Forward Reach R Reach at Ground S Max. Reach at Full Height T Reach at Full Height- 45 Reach at Full HeightFully Dumped U Dig Depth Rollback at Ground Max Dump Angle U Overall Operating Height

3310 (10 10) mm(ft) 3550 (11 8) mm(ft) 352 (12) mm(ft) 1622 (5 4) mm(ft) 1282 (4 3) mm(ft) 829 (2 9) mm(ft)

Trench Bkts

Ditch cleaning Sq hole bucket

Over Bucket 10.7 (35 1) m(ft) 10.0 (32 10) m(ft)

3553 (11 8 ) mm (ft) 4531(1410) mm (ft) 3871 (12 8) mm (ft) 4849 (1511) mm (ft) 2602 (8 6 ) mm (ft) 3991 (13 1) mm (ft)

7.7 (25 3) m(ft) 6.8 (22 3) m(ft)

645 (2 1) mm(ft)
156 (6) mm(in) 45 57 4230 (13 11) mm(ft)

645 (2 1) mm(ft)
156 (6) mm(in) 45 57 4580 (14 1) mm(ft)

Backhoe Performance Standard Dipper Slew Torque Dipper Tearout Bucket Tearout Hydraulic Lift Capacity (Including Bucket) Deep Dig Dipper Ret 3946 (8670) kgf (lbf) 5260(11596) kgf (lbf) 1148 (2531) kg (lb) Ext 2644 (5829) kgf (lbf) 5260(11596) kgf (lbf) 812 (1790) kg (lb)

16100 (11875) Nm(lbfft) 16100 (11875) Nm(lbfft 16100 (11875) Nm(lbfft 3946 (8670) kgf (lbf) 5260 (11596) kgf (lbf) 1384 (3051) kg (lb)

194 1286 (4 3) 2115 (6 11) 8

194 1286 (4 3) 2115 (6 11) 8

194 1286 (4 3) 2115 (6 11) 8

Das könnte Ihnen auch gefallen