Beruflich Dokumente
Kultur Dokumente
Jump to: navigation, search This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (September 2009) Work hardening, also known as strain hardening or cold working, is the strengthening of a metal by plastic deformation. This strengthening occurs because of dislocation movements within the crystal structure of the material.[1] Any material with a reasonably high melting point such as metals and alloys can be strengthened in this fashion[citation needed]. Alloys not amenable to heat treatment, including low-carbon steel, are often work-hardened. Some materials cannot be work-hardened at normal ambient temperatures, such as indium,[citation needed] however others can only be strengthened via work hardening, such as pure copper and aluminum.[2] Work hardening may be desirable or undesirable depending on the context.
An example of undesirable work hardening is during machining when early passes of a cutter inadvertently work-harden the workpiece surface, causing damage to the cutter during the later passes. Certain alloys are more prone to this than others; superalloys such as Inconel require machining strategies that take it into account. An example of desirable work hardening is that which occurs in metalworking processes that intentionally induce plastic deformation to exact a shape change. These processes are known as cold working or cold forming processes. They are characterized by shaping the workpiece at a temperature below its recrystallization temperature, usually at the ambient temperature.[3] Cold forming techniques are usually classified into four major groups: squeezing, bending, drawing, and shearing. Applications include the heading of bolts and cap screws and the finishing of cold rolled steel.
Contents
[hide]
1 History 2 Theory o 2.1 Elastic and plastic deformation o 2.2 Dislocations and lattice strain fields o 2.3 Increase of dislocations and work hardening o 2.4 Quantification of work hardening o 2.5 Example 3 Empirical relations 4 Processes o 4.1 Advantages and disadvantages
[edit] History
Copper was the first metal in common use for tools and containers since it is one of the few metals available in non-oxidized form, not requiring the smelting of an ore. Copper is easily softened by heating and then cooling (it does not harden by quenching, as in cool water). In this annealed state it may then be hammered, stretched and otherwise formed, progressing toward the desired final shape, but becoming harder and less ductile as work progresses. If work continues beyond a certain hardness the metal will tend to fracture when worked and so it may be reannealed periodically as the shape progresses. Annealing is stopped when the workpiece is near its final desired shape, and so the final product will have a desired stiffness and hardness. The technique of repouss exploits these properties of copper, enabling the construction of durable jewelry articles and sculptures (including the Statue of Liberty). For metal objects designed to flex, such as springs, specialized alloys are usually employed in order to avoid work hardening (a result of plastic deformation) and metal fatigue, with specific heat treatments required to obtain the necessary characteristics. Devices made from aluminum and its alloys, such as aircraft, must be carefully designed to minimize or evenly distribute flexure, which can lead to work hardening and in turn stress cracking, possibly causing catastrophic failure. For this reason modern aluminum aircraft will have an imposed working lifetime (dependent upon the type of loads encountered), after which the aircraft must be retired.
[edit] Theory
Before work hardening, the lattice of the material exhibits a regular, nearly defect-free pattern (almost no dislocations). The defect-free lattice can be created or restored at any time by annealing. As the material is work hardened it becomes increasingly saturated with new dislocations, and more dislocations are prevented from nucleating (a resistance to dislocationformation develops). This resistance to dislocation-formation manifests itself as a resistance to plastic deformation; hence, the observed strengthening. In metallic crystals, irreversible deformation is usually carried out on a microscopic scale by defects called dislocations, which are created by fluctuations in local stress fields within the material culminating in a lattice rearrangement as the dislocations propagate through the lattice. At normal temperatures the dislocations are not annihilated by annealing. Instead, the dislocations accumulate, interact with one another, and serve as pinning points or obstacles that significantly impede their motion. This leads to an increase in the yield strength of the material and a subsequent decrease in ductility.
Such deformation increases the concentration of dislocations which may subsequently form lowangle grain boundaries surrounding sub-grains. Cold working generally results in a higher yield strength as a result of the increased number of dislocations and the Hall-Petch effect of the subgrains, and a decrease in ductility. The effects of cold working may be reversed by annealing the material at high temperatures where recovery and recrystallization reduce the dislocation density. A material's work hardenability can be predicted by analyzing a stress-strain curve, or studied in context by performing hardness tests before and after a process.[citation needed]
In materials science parlance, dislocations are defined as line defects in a material's crystal structure. They are surrounded by relatively strained (and weaker) bonds than the bonds between the constituents of the regular crystal lattice. This explains why these bonds break first during plastic deformation. Like any thermodynamic system, the crystals tend to lower their energy through bond formation between constituents of the crystal. Thus the dislocations interact with one another and the atoms of the crystal. This results in a lower but energetically favorable energy conformation of the crystal. Dislocations are a "negative-entity" in that they do not exist: they are merely vacancies in the host medium which does exist. As such, the material itself does not move much. To a much greater extent visible "motion" is movement in a bonding pattern of largely stationary atoms. The strained bonds around a dislocation are characterized by lattice strain fields. For example, there are compressively strained bonds directly next to an edge dislocation and tensilely strained bonds beyond the end of an edge dislocation. These form compressive strain fields and tensile strain fields, respectively. Strain fields are analogous to electric fields in certain ways. Additionally, the strain fields of dislocations, obey the laws of attraction and repulsion. The visible (macroscopic) results of plastic deformation are the result of microscopic dislocation motion. For example, the stretching of a steel rod in a tensile tester is accommodated through dislocation motion on the atomic scale.
Figure 1: The yield stress of an ordered material has a half-root dependency on the number of dislocations present. Increase in the number of dislocations is a quantification of work hardening. Plastic deformation occurs as a consequence of work being done on a material; energy is added to the material. In addition, the energy is almost always applied fast enough and in large enough magnitude to not only move existing dislocations, but also to produce a great number of new dislocations by jarring or working the material sufficiently enough. New dislocations are generated in proximity to a Frank-Read source.
Yield strength is increased in a cold-worked material. Using lattice strain fields, it can be shown that an environment filled with dislocations will hinder the movement of any one dislocation. Because dislocation motion is hindered, plastic deformation cannot occur at normal stresses. Upon application of stresses just beyond the yield strength of the non-cold-worked material, a cold-worked material will continue to deform using the only mechanism available: elastic deformation, the regular scheme of stretching or compressing of electrical bonds (without dislocation motion) continues to occur, and the modulus of elasticity is unchanged. Eventually the stress is great enough to overcome the strain-field interactions and plastic deformation resumes. However, ductility of a work-hardened material is decreased. Ductility is the extent to which a material can undergo plastic deformation, that is, it is how far a material can be plastically deformed before fracture. A cold-worked material is, in effect, a normal (brittle) material that has already been extended through part of its allowed plastic deformation. If dislocation motion and plastic deformation have been hindered enough by dislocation accumulation, and stretching of electronic bonds and elastic deformation have reached their limit, a third mode of deformation occurs: fracture.
where 0 is the intrinsic strength of the material with low dislocation density and is a correction factor specific to the material. As shown in Figure 1 and the equation above, work hardening has a half root dependency on the number of dislocations. The material exhibits high strength if there are either high levels of dislocations (greater than 1014 dislocations per m2) or no dislocations. A moderate number of dislocations (between 107 and 109 dislocations per m2) typically results in low strength.
[edit] Example
For an extreme example, in a tensile test a bar of steel is strained to just before the distance at which it usually fractures. The load is released smoothly and the material relieves some of its strain by decreasing in length. The decrease in length is called the elastic recovery, and the end result is a work-hardened steel bar. The fraction of length recovered (length recovered/original length) is equal to the yield-stress divided by the modulus of elasticity. (Here we discuss true stress in order to account for the drastic decrease in diameter in this tensile test.) The length recovered after removing a load from a material just before it breaks is equal to the length recovered after removing a load just before it enters plastic deformation.
The work-hardened steel bar has a large enough number of dislocations that the strain field interaction prevents all plastic deformation. Subsequent deformation requires a stress that varies linearly with the strain observed, the slope of the graph of stress vs. strain is the modulus of elasticity, as usual. The work-hardened steel bar fractures when the applied stress exceeds the usual fracture stress and the strain exceeds usual fracture strain. This may be considered to be the elastic limit and the yield stress is now equal to the fracture toughness, which is of course, much higher than a non-work-hardened-steel yield stress. The amount of plastic deformation possible is zero, which is obviously less than the amount of plastic deformation possible for a non-work-hardened material. Thus, the ductility of the cold-worked bar is reduced. Substantial and prolonged cavitation can also produce st5rain hardening. Additionally, jewelers will construct structurally sound rings and other wearable objects (especially those worn on the hands) that require much more durability (than earrings for example) by utilizing a material's ability to be work hardened. While casting rings is done for a number of economical reasons (saving a great deal of time and cost of labor), a master jeweler may utilize the ability of a material to be work hardened and apply some combination of cold forming techniques during the production of a piece.
where is the stress, K is the strength index, p is the plastic strain and n is the strain hardening exponent. Ludwik's equation is similar but includes the yield stress:
If a material has been subjected to prior deformation (at low temperature) then the yield stress will be increased by a factor depending on the amount of prior plastic strain 0:
The constant K is structure dependent and is influenced by processing while n is a material property normally lying in the range 0.20.5. The strain hardening index can be described by:
This equation can be evaluated from the slope of a log() - log() plot. Rearranging allows a determination of the rate of strain hardening at a given stress and strain:
[edit] Processes
The following is a list of cold forming processes:[4]
Squeezing o Rolling o Swaging o Extrusion o Forging o Sizing o Riveting o Staking o Coining o Peening o Burnishing o Hubbing o Thread rolling Bending o Angle bending o Roll bending o Draw and compression o Roll forming o Seaming o Flanging o Straightening Shearing o Slitting o Blanking o Piercing o Lancing o Perforating o Notching o Nibbling
Shaving Trimming Cutoff Dinking Drawing o Tube drawing o Wire drawing o Spinning o Embossing o Stretch forming o Sheet metal drawing o Ironing o Superplastic forming
o o o o
Techniques have been designed to maintain the general shape of the workpiece during work hardening, including shot peening and equal channel angular extrusion.
No heating required Better surface finish Superior dimensional control Better reproducibility and interchangeability Directional properties can be imparted into the metal Contamination problems are minimized
The increase in strength due to strain hardening is comparable to that of heat treating. Therefore, it is sometimes more economical to cold work a less costly and weaker metal than to hot work a more expensive metal that can be heat treated, especially if precision or a fine surface finish is required as well. The cold working process also reduces waste as compared to machining, or even eliminates with near net shape methods.[3] The material savings becomes even more significant at larger volumes, and even more so when using expensive materials, such as copper. The saving on raw material as a result of cold forming can be very significant, as is saving machining time. Production cycle times when cold working are very short. On multi-station machinery, production cycle times are even less. This can be very advantageous for large production runs. During cold working the part undergoes work hardening and the microstructure deforms to follow the contours of the part surface. Unlike
hot working, the inclusions and grains distort to follow the contour of the surface, resulting in anisotropic engineering properties.[5] Disadvantages:[3]
Greater forces are required Heavier and more powerful equipment and stronger tooling are required Metal is less ductile Metal surfaces must be clean and scale-free Intermediate anneals may be required to compensate for loss of ductility that accompanies strain hardening The imparted directional properties may be detrimental Undesirable residual stress may be produced
Due to the large capital costs required to set up a cold working process the process is usually only suitable for large volume productions.[3] Intermediate annealings may be required to reach the required ductility to continue cold working a workpiece, otherwise it may fracture if the ultimate tensile strength is exceeded. An anneal may also be used to obtain the proper engineering properties required in the final workpiece. Also, the distorted grain structure that gives the workpiece its superior strength can lead to residual stresses.[5] Cold worked items suffer from a phenomenon known as springback, or elastic springback. After the deforming force is removed from the workpiece, the workpiece springs back slightly. The amount a material springs back is equal to Young's modulus for the material from the final stress.[6]
[edit] References
1. 2. 3. 4. 5. 6. ^ Degarmo, Black & Kohser 2003, p. 60. ^ Smith & Hashemi 2006, p. 246. ^ a b c d e Degarmo, Black & Kohser 2003, p. 375. ^ Degarmo, Black & Kohser 2003, p. 408. ^ a b Degarmo, Black & Kohser 2003, p. 378. ^ Degarmo, Black & Kohser 2003, p. 376.
[edit] Bibliography
Degarmo, E. Paul; Black, J T.; Kohser, Ronald A. (2003), Materials and Processes in Manufacturing (9th ed.), Wiley, ISBN 0-47165653-4.
Smith, William F.; Hashemi, Javad (2006), Foundations of Materials Science and Engineering (4th ed.), McGraw-Hill, ISBN 0-07295358-6.
I am highly knowledgeable about this topic (optional) Submit ratings Saved successfully Your ratings have not been submitted yet Categories: Industrial processes Metallurgical processes Metalworking Strengthening mechanisms of materials Hidden categories: Articles needing additional references from September 2009 All articles needing additional references All articles with unsourced statements Articles with unsourced statements from March 2010 Articles with unsourced statements from October 2009
Personal tools
Namespaces
Article Talk
Navigation
Main page Contents Featured content Current events Random article Donate to Wikipedia
Interaction Toolbox
Print/export
Languages
Deutsch Espaol Franais Italiano Portugus Suomi This page was last modified on 18 February 2012 at 19:08. Text is available under the Creative Commons AttributionShareAlike License; additional terms may apply. See Terms of use for details. Wikipedia is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization. Contact us Privacy policy About Wikipedia Disclaimers Mobile view
Top of Form
BoYXNlDWZlcnJpd
Products Your browser does not support inline frames or is currently configured not to display inline frames. Class Catalog Competencies LMS Administration Center Student Center Assessments Custom Content Bookstore AICC and SCORM TU Mobile Services Your browser does not support inline frames or is currently configured not to display inline frames.
Comprehensive Services Optimization Services Core Services Managed Services Class List Your browser does not support inline frames or is currently configured not to display inline frames. Class Catalog Classes by Industry Printable Class List New Additions Language Comparison Job Programs Markets Your browser does not support inline frames or is currently configured not to display inline frames. Large Business Small Business Educators Industrial Distributors Latin America Individuals Standards and Credits NIMS MSSC AWS CEU
Green Training Wind Solar Fuel Cells Resources Your browser does not support inline frames or is currently configured not to display inline frames. 30-Day Trial Class Catalog Contact Request Online Tours Download Brochure TU Blog Case Studies White Papers Webinars Pricing About TU Your browser does not support inline frames or is currently configured not to display inline frames. About Us Events Contact Us Our Customers Our Partners Our Data Center Newsletter
Press Releases Careers Customer Portal Your browser does not support inline frames or is currently configured not to display inline frames. Student Login Admin Login First-Time Registration Site Training Community Support
What is the definition of cold working? The shaping of metal at temperatures substantially below the point of recrystallization. Cold working adds strength and hardness. Learn more about cold working in the class "Heat Treatment of Steel 230" below.
Materials Training
Class Information
ToolingU.com classes are offered at the beginner, intermediate, and advanced levels. The typical class consists of 12 to 25 lessons and will take approximately one hour to complete.
Heat Treatment of Steel 230 This class describes the different steel phases as well as common heat treatment methods for steel. Includes an Interactive Lab. 500110 500210
Below are all the competencies and job programs that contain the class Heat Treatment of Steel 230. Job programs are our traditional class lists organized according to common job functions. Competencies are our latest job-specific curricula that help tie online learning to practical, hands-on tasks. Click on any title to view its details.
Competencies Intermediate Centerless Grinder Operator 18 CNC Mill Operator In-Process Inspector English, Spanish
Show All
The Phases of Steel Effects of Carbon Content Hypoeutectoid and Hypereutectoid Steels Formation of Pearlite Bainite Martensite Annealing Types of Annealing Normalizing Quenching Tempering Combination of Heat Treatment Steps Hardenability Types of Furnaces Surface Hardening Summary
Describe the formation of cementite. Define hypoeutectoid and hypereutectoid steels. Describe the formation of pearlite. Describe the formation of bainite. Describe the formation of martensite. Define annealing. Distinguish among different types of annealing. Define normalizing. Define quenching. Define tempering. Describe the combination of heat treatment steps. Define hardenability. Distinguish between the types of furnaces used in heat treatment. Distinguish among surface hardening methods.
Class Vocabulary annealing The steady heating of a metal at a certain temperature above the recrystallization phase followed by a gradual cooling process. The phase at which solid steel recrystallizes and has a face-centered cubic crystal structure. Austenite steel holds a greater amount of dissolved carbon and exhibits increased formability. A combination of ferrite and cementite in ferrous metals that is harder than pearlite. Bainite contains needlelike grain structures, and it requires an initial rapid cooling followed by gradual cooling.
austenite phase
bainite
A heat-treatment furnace that soaks a stationary workpiece. The crystal structure that contains an atom in the center and one atom in each corner of a cube. Ferrite has a BCC crystal structure. A body-centered cubic crystal structure that has been distorted by the presence of extra atoms of carbon. Martensite has a BCT crystal structure. A surface hardening method that heats metal within a carbon-rich environment to increase carbon levels on the metal surface for added hardness. A compound of iron and carbon that is very hard and brittle. The presence of cementite hardens steel. A shiny, hard, steel-gray metal that increases the hardenability of steel. Stainless steels also contain large amounts of chromium. The shaping of metal at temperatures substantially below the point of recrystallization. Cold working adds strength and hardness. A heat-treatment furnace that soaks a workpiece as it moves along a conveyor or rotating hearth. The formation of a consistent, repeating pattern of atoms. A crystal structure develops as a liquid metal cools and changes into a solid. The ability of a metal to be drawn, stretched, or formed without breaking. A heat-treatment furnace that uses electric current to control the temperature of a metal. The lowest temperature at which austenite transforms into ferrite and cementite. Steel with 0.77 percent carbon transforms at this temperature. The crystal structure that contains one atom in the center of the six sides of a cube and one atom in each corner of the cube. Austenite has an FCC
body-centered tetragonal
carburizing
cementite
chromium
cold working
continuous furnace
crystal structure
ductility
electric furnace
eutectoid temperature
face-centered cubic
crystal structure. ferrite phase The phase at which solid steel has a body-centered cubic crystal structure. Ferrite steel can hold only a minimal amount of carbon, and it is relatively soft. A surface hardening method that heats a metal with a high-temperature flame, followed by quenching. An annealing process that soaks the metal above the austenite phase, followed by gradual cooling. A full anneal may take a day or longer. The ability of a metal to be hardened by normal heat treatment processes. The controlled heating and cooling processes used to change the structure of a material and alter its physical and mechanical properties. Steel that contains more than 0.77 percent carbon. Hypereutectoid steel consists of pearlite and cementite at room temperature. Steel that contains less than 0.77 percent carbon. Hypoeutectoid steel consists of ferrite and pearlite at room temperature. A surface hardening method that heats a metal with an electrical current. A hard, brittle, gray-white metal that increases the hardenability of steel. Manganese also increases strength and hardness. A steel that consists of a distorted, body-centered tetragonal crystal structure. Martensite is very hard and brittle. A property that describes a material's ability to compress, stretch, bend, scratch, dent, or break. A hard, silvery white metal that increases the hardenability of steel. Molybdenum is also an effective substitute for tungsten in many highspeed tool steels.
flame hardening
full annealing
hardenability
heat treatment
hypereutectoid steel
hypoeutectoid steel
induction hardening
manganese
martensite
mechanical properties
molybdenum
nitriding
A surface hardening method that heats a metal within a nitrogen-rich environment. Metals that are nitrided typically contain aluminum or chromium. The steady heating of a metal above the recrystallization phase, followed by a cooling process at a moderate pace. Normalized metals are often cooled in open air at room temperature. A combination of ferrite and cementite. Pearlite grain structures resemble human fingerprints. Steel with exactly 0.77 percent carbon consists of uniform pearlite at room temperature. A portion of material with a uniform crystal structure, consistent properties, and recognizable boundaries. At room temperature, steel consists of two or more phases. The separation of a substance that was previously dissolved in another substance. An annealing process that heats the metal below the austenite phase to restore ductility after cold working. The soaking of a metal at a high temperature above the recystallization phase, followed by a rapid cooling process. The quenching of steel creates martensite. The liquid or air substance used to cool a metal during quenching. Water, saltwater, air, and oil are common quenching mediums. An annealing process that attempts to partially restore the original grain structure of the metal and still preserve the strain hardening that has developed. The development of an unwanted rough coating on the surface of the metal. The heating of a metal at a constant temperature for a suitable duration of time.
normalizing
pearlite
phase
precipitation
process annealing
quenching
quenching medium
recovery annealing
scaling
soaking
strain hardening
The increase of hardness and strength in steel caused by the cold working of the metal. An annealing process that heats the metal below the austenite phase to reduce distortions or changes in dimensions that might occur after shaping. Any heat-treatment method used to alter the properties within the surface or localized area of a metal. Martensite steel that has been tempered to improve ductility and toughness. The steady heating of martensite steel at a temperature below the recrystallization phase, followed by a gradual cooling process. The amount of energy a material can absorb before it breaks.
stress relieving
surface hardening
tempered martensite
tempering
toughness
ToolingU.com Book Store Testing Products Solutions About Us Customer Portal Events Take a Tour Request a Quote 30-Day Free Trial Contact Us
English (US)
ToolingU.com 3615 Superior Avenue East Building 44, 6th Floor Cleveland, OH 44114 Toll Free: +1 (866) 706-8665 Copyright 2012 Tooling University, LLC. All rights reserved.
Bottom of Form