Beruflich Dokumente
Kultur Dokumente
It turns out that it was Delco did not realize the possibility of adjusting the tone in the case of a signal from the phone. That is, just do not have to manage the team. Then it becomes a more interesting question: Does come with AM and FM, or on different inputs? Adjusting the tone is quite relevant. Even more relevant than the balance :)
Back to top
Solder
Excellent people
It is, but only through the service menu. :) It's easy. The sound level adjustable handle.
Back to top
Solder
Excellent people
Here is what is currently able to dig: 1 - input the phone 2 - Line Outputs 3 - a place to connect the line input. 4 -? mikruhi isolation: they are numbered with red pin-s which coincided with TDA7342EQ2N. Blue, which differ from TDA7342EQ2N (mixed) . Block diagram of TDA7342EQ2N:
Back to top
Solder
Excellent people
Sgodnya made on the line in car400. Everything works as I expected. :) In the evening will be pictures.
Back to top
KERISS
Post subject:
Back to top
IgorR
Experienced Vektravod
The public is worried, "Where are pictures?: Cry :: cry :: cry:?" Nakolko true for Car300??? :?:
Back to top
Solder
Excellent people
Car400 on the same tone is not regulated? No, the handles are not adjustable, only through the service menu. But I liked the sound quality.
Quote:
Back to top
Solder
Excellent people
The promised pictures! tipsy in the place indicated by green arrows - pin13, pin9. Deactivate the track near the pin9, as shown in blue is linear. Get the left and right channel.photo of Big. http://foto.mail.ru/mail/valenvaio/48/s227.jpg wire to mute the signal solder here. To initialize the mute him serve the land. In this radio will be included if it is disabled. Blshaya photo. http://foto.mail.ru/mail/valenvaio/48/s228.jpg Earth I took with antenna connectors, soldered the wire back.
Back to top
IgorR
Experienced Vektravod
I decided to zamorochitsya! But, after the question arises: Where to attach iPod? So it was handy, do not throw much in the eye, and the cabin is not sticking to the wire! I have the very first shuffle. On a lighter look. It seems like just more comfortable that he was hanging on the mirror. In this case, if the output line-in connector somewhere near the mirror, how it will work? Will not occur any interference? Or maybe someone has other ideas? Where can I install an MP3 player?
Back to top
dk
Newcomer
Hello, Gentlemen, And do not tell you how to properly disassemble the CDR 500, which would have access to an optical node, reading CD disks. The purpose - to clean. Since the last time was a very selective reading discs. Thank you.
Back to top
Solder
Excellent people
The easiest way - cleaning disk. They owe it all apart and can damage the drive.
Back to top
dk
Newcomer
That's right. But I was scared that the cleaning disc is often knocks himself the "eye". If you can not make out, it will do so. Who took the upper and lower lids, the front panel. All the same car for 7 years. The roads, the dust. I want to make sure everything is clean. Thank you.
Back to top
MaximuS_OBA
Newcomer
Solder , I apologize for my ignorance in radiolektronike, but please tell me 1. mute - what's this animal? soldered to the third prong of the jack (the first - left Canadian, the second - the right channel)? 2. "The wire solder for signal mute here. To initialize the mute him serve the land," ie, Are you saying that the specified contact is needed to solder two wires? 3. Th for the pin 1 on the first picture?
Back to top
krenkel
Experienced Vektravod
MaximuS_OBA C such knowledge in electronics, I would advise you to buy a beer friends understand this and not get involved yourself.
Back to top
Hubo
Chief Agronomist
Back to top
Solder
Excellent people
Bring a look.
Back to top
Solder
Excellent people
MaximuS_OBA C such knowledge in electronics, I would advise you to buy a beer friends understand this and not get involved yourself.
MaximuS_OBA If what I brought in the pictures and said it is not clear, it's better he did not go, there is a great chance to ruin the unit.
Back to top
Andi_555
Newcomer
Post subject: Re: Implementation of line-by car400, ccr600, cdr500. Posted: October 27, 2008 10:00
Lord. HELP. And if knowledge really is not that deep, who can do it will take the fee? I'd like to fuck a linear, very much. Pliz. Podedu in the right place as it should be thanked.
Back to top
Solder
Excellent people
Post subject: Re: Implementation of line-by car400, ccr600, cdr500. Posted: October 28, 2008 15:51
Lord. HELP. And if knowledge really is not that deep, who can do it will take the fee? I'd like to fuck a linear, very much. Pliz. Podedu in the right place as it should be
thanked.
What is radio?
Back to top
Andi_555
Newcomer
Post subject: Re: Implementation of line-by car400, ccr600, cdr500. Posted: October 29, 2008 13:43
Car500, with the disk and removable panel with buttons. Specifically I can not tell if this is necessary, tell me where to look.