Beruflich Dokumente
Kultur Dokumente
BENEFITS
Highest Efficiency Panel efficiency of 18.7% is higher than any commercially available competitor panel. More Power SunPower 305 delivers 50% more power per unit area than conventional solar panels and 100% more than thin film solar panels. Reduces Installation Cost More power per panel means fewer panels per install. This saves both time and money. Reliable and Robust Design Proven materials, tempered front glass, and a sturdy anodized frame allow panel to operate reliably in multiple mounting configurations.
The SunPower 305 Solar Panel provides todays highest efficiency and performance. Utilizing 96 next generation SunPower all back-contact solar cells, the SunPower 305 delivers an unprecedented total panel conversion efficiency of 18.7%. The 305 panels reduced voltagetemperature coefficient and exceptional low-light performance attributes provide outstanding energy delivery per peak power watt.
SunPowers High Efficiency Advantage - Up to Twice the Power
Comparable systems covering 1000 m / 10,750 ft
Thin Film Watts / Panel Efficiency kWs 65 9.0% 90 Conventional 165 12.0% 120 SunPower 305 18.7% 187
SPR-305-WHT
00000220
Electrical Data
Measured at Standard Test Conditions (STC): irradiance of 1000/m2, air mass 1.5 g, and cell temperature 25 C
IV Curve
305 W 54.7 V 5.58 A 64.2 V 5.96 A 1000 V, 600 V 0.38% / C 176.6 mV/C 3.5 mA/C 15 A 187 W/m, 17.4 W/ft Temperature Current (A)
Peak Power (+/-5%) Rated Voltage Rated Current Open Circuit Voltage Short Circuit Current Maximum System Voltage Temperature Coefficients
Pmax Vmp Imp Voc Isc IEC, UL Power Voltage (Voc) Current (Isc)
500 W/m
1000 W/m at 50 C
40
50
60
70
Voltage (V)
Current/voltage characteristics with dependence on irradiance and module temperature.
Mechanical Data
Solar Cells Front Glass Junction Box Output Cables Frame Weight
96 SunPower all back-contact monocrystalline 4.0 mm (5/32 in) tempered IP-65 rated with 3 bypass diodes 900 mm length cables / Multi-Contact connectors Anodized aluminum alloy type 6063 24 kg, 53 lbs
Dimensions
mm (in)
180 (7.04) 1200 (47.24)
4.2 (.16)
( Ground )
1002 (39.45)
915
322 (12.69)
1559 (61.39)
46 (1.81)
4.2 (.16)
(36.02) 8X 6.6(.26)
( Ground )
CAUTION: READ SAFETY AND INSTALLATION INSTRUCTIONS BEFORE USING THE PRODUCT. Go to www.sunpowercorp.com/panels for details About SunPower
SunPower designs, manufactures and delivers high-performance solar electric technology worldwide. Our high-efficiency solar cells generate up to 50 percent more power than conventional solar cells. Our high-performance solar panels, roof tiles and trackers deliver significantly more energy than competing systems.
January 2008 SunPower Corporation. All rights reserved. Specifications included in this datasheet are subject to change without notice. Document #001-42209 Rev **A4_en
sunpowercorp.com