Beruflich Dokumente
Kultur Dokumente
Latching Solutions
BDS-A (V23130-C) Micro Latching (V23145-L) Mini Latching (V23141-L) PK2 Latching (V23201-L) Micro K Latching (V23086-L)
Features
Limiting continuous current 40 A Wide voltage range High current version Power K-S (V23071) available
Limiting continuous current 20 A 24 V versions with special contact gap Various contact arrangements and materials Also available for 42 V applications
Limiting continuous current 30 A Easiest PCB routing among all PCB relays
Wave (THT) and reflow (THR / pin-inpaste) solderable versions 60% volume reduced Power K at increased performance PCB area requirements minimized by 50% to only 293 mm 2 Limiting continuous current 40 A Latching version available
Wave (THT) and reflow (THR / pin-inpaste) solderable versions Single and twin versions Small power relay Limiting continuous current 30 A Minimal weight Low noise operation
Single and twin versions Small relays for surface mounted technology Limiting continuous current 30 A Minimal weight Low noise operation Relay designed for convection and infrared reflow soldering
Wave (THT) and reflow (THR / pin-inpaste) solderable versions Single and twin versions Smallest automotive PCB relays in their classes (PCB area 81 mm 2 / 157 mm 2 ) First automotive relays using overmolding technology Limiting continuous current 30 A Very easy routing of PCB-layout Power-saving high impedance coil Low noise operation Compliant
Limiting continuous current 40 A at 85 C Pin assignment similar to ISO 7588 part 1 Plug-in or PCB terminals Also available for 42 V applications Customized versions on request: 24 V versions with 0.8 mm contact gap, integrated components (e.g. resistor, diode), customized marking / color, special covers (e.g. notches, release features, brackets), various contact arrangements and materials Compliant
Limiting continuous current 70 A Pin assignment similar to ISO 7588 part 1 Plug-in or PCB terminals Customized versions on request: 24 V versions with 0.8 mm contact gap, integrated components (e.g. resistor, diode), customized marking / color, special covers (e.g. notches, release features, brackets)
Limiting continuous current 25 A at 85 C High current version with limiting continuous current 30 A at 85 C Pin assignment according to ISO 7588 part 3 Customized versions on request: 24 V versions with 0.6 mm contact gap, integrated components (e.g. diode), customer marking, special covers (e.g. notches, release features, brackets)
Noise level below 50 dB(A) Limiting continuous current 20 A Pin assignment according to ISO 7588 part 3 Plug-in terminals Customized versions on request: special marking, special covers (e.g. notches, release features, brackets)
Limiting continuous current 40 A (Mini) at 85 C / 70 A (Maxi) Pin assignment according to ISO 7588 part 1 Bracket Customized versions on request: integrated components (e.g. diode), customized marking
Full, symmetric star-point disconnection Limiting continuous current 75 A of an electric power steering motor Dustproof and sealed versions Limiting continuous current 90 A Disconnection of high over-currents up to 200 A in 12 V and up to 60 A in 36 V power nets Contact arrangement fulfills 42 V power net requirements Resistant against high ambient temperature up to 125 C Optimized dimensions Compliant 1 Triple make contact 200 A / > 10 cycles 120 A 90 A (60 A at 125 C) Silver based 12, 24, 36 V 1.5 W < 20 ms < 10 ms -40 to +125 C Sealed Welding assembly 32.3 x 18.3 x 18.8 mm 1 Form A 75 A 75 A 75 A 50 A 12, 24 V 7.2, 4.4 W < 15 ms < 15 ms -40 to +125 C Dustproof 44.0 x 36.0 x 39.0 mm Compliant 1 Bifurcated contact 150 A 100 A 75 A 50 A 12 V 3.1 W
Limiting continuous current 150 A at 85 C Current switching ability up to 300 A Suitable for voltage levels up to 42 V Heat moisture and vibration resistant Minimal contact resistance Dustproof and sealed versions
Limiting continuous current 190 A at 85 C Electrically settable and resettable ON / OFF bistable device Suitable for voltage levels up to 42 V High peak current carrying capability up to 1500 A
Magnetically latched Micro ISO plug-in relay Two coils with set and reset function Pin assignment according to ISO 7588 part 3 Plug-in terminals Customized versions on request: special marking, special covers (e.g. notches, release features, brackets)
Magnetically latched Mini ISO plug-in relay Two coils with set and reset function Pin assignment similar to ISO 7588 part 1 Plug-in terminals Customized versions on request: special marking, special covers (e.g. notches, release features, brackets)
ELV / RoHS / WEEE status Contacts Contact arrangement Max. switching current ON [A] Max. switching current OFF [A] Max. switching current ON / OFF / ON at 23 C [A] Max. limiting current at 23 C [A] Limiting continuous current at 23 C [A] Limiting continuous current at 85 C [A] Contact material options Coil Coil voltage range [V] Nominal coil power [W] General Data Operate time - typ. [ms] Release time - typ. [ms] Temperature range [C] Sealing Termination method Maximum dimensions - l x w x h [mm]
Compliant 1 Form A 100 A 60 A 45 A 30 A 1 Form C 30 / 100 A (NC / NO) 30 / 60 A (NC / NO) 30 / 45 A (NC / NO) 25 / 30 A (NC / NO) Silver based 12, 24 V 1.6 W 5 ms 3 ms -40 to +85 C Open or sealed PCB Open - 24 x 19.25 x 18.5 mm Sealed - 26.5 x 21.5 x 21.5 mm 1 Form A 60 A 20 A 15 A 10 A
Compliant 1 Form C 12/60 A (NC/NO) 10/20 A (NC/NO) 10/15 A (NC/NO) 5/10 A (NC/NO) Silver based 12, 24 V 1.1 W 3 ms 1.5 ms -40 to +85 C Open or sealed PCB Open - 16 x 13.2 x 18 mm Sealed - 17.2 x 15 x 19.5 mm 1 Form U 2 x 40 A 2 x 20 A 2 x 10 A 2x6A
Compliant 2 Form C 35 A 35 A 30 A motor reverse 30 A motor reverse Silver based 12 V 0.56, 0.81 W 3 ms 1.3 ms -40 to +85 C PCB 17.6 x 17 x 13.4 mm
Compliant 1 Form A 200 A 40 A 40 A 33 A Silver based 12 V 0.8 W 3 ms 1.5 ms -40 to +105 C Sealed / Open vent hole PCB 18.5 x 16.2 x 16.1 mm 1 Form A 40 A (100 A) 30 A 30 A 20 A
Compliant 1 Form U 2 x 100 A 2 x 40 A 2 x 32 A 2 x 35 A 1 Form A 240 A 70 A 70 A 50 A Silver based 12, 24 V 2.0 W 7 ms 2 ms -40 to +125 C Dustproof Quick connect, PCB 26.2 x 26.2 x 25.2 mm 1 Form A 120 A 30 A 30 A 25 A
Compliant 1 Form C 40 / 120 A (NC / NO) 15 / 30 A (NC / NO) 20 / 30 A (NC / NO) 15 / 25 A (NC / NO) Silver based 12, 24 V 5 ms 3 ms -40 to +125 C Dustproof Quick connect 23 x 15.5 x 25.4 mm 1.4 W 1 Form A 100 A 30 A 20 A 15 A
Compliant 1 Form C 40 A 30 A 15 / 20 A (NC / NO) 10 / 15 A (NC / NO) Silver based 12 V 3 ms -40 to +85 C Dustproof Quick connect 23 x 15.5 x 25.4 mm 0.6 W 4 ms
1 Form A (Mini)
Compliant 120 A 60 A 60 A 40 A
1 Form C (Mini) 1 Form A (Maxi) 45/120 A (NC/NO) 240 A 40/60 A (NC/NO) 70 A 45/60 A (NC/NO) 30/40 A (NC/NO)
Compliant 1 Form X 190 A - 50k / 100 A - 100k 190 A - 50k / 100 A - 100k 1500 A - 5 times 1500 A for 200 ms, 1000 A for 1 s 260 A 190 A Silver based 12, 24, 42 V Excitation with pulses (15100 ms) < 15 ms < 15 ms -40 to +120 C Dustproof / Weatherproof 36.0 x 33.0 x 60.0 mm
Compliant 1 Form A 50 A 30 A 25 A 20 A Silver based 12 V Pulsed driving 1.5 ms 1.5 ms -40 to +125 C Dustproof Quick connect 23 x 15.5 x 25.4 mm
Compliant 1 Form A 200 A 40 A 40 A 30 A Silver based 12 V Pulsed driving 1.5 ms 1.5 ms -40 to +125 C Dustproof Quick connect 30.1 x 30.1 x 31.1 mm
Magnetically latched PCB power relay Limiting continuous current 50 A Increased ambient temperature 125 C Maximum switch on current Reduced coil power consumption of latching version allows higher limiting continuous current and increased ambient temperature 60% volume reduced Power K Design allows highest reliability High shock and vibration resistance No change of switching state version at breakdown of battery voltage Compliant 1 Form A 200 A 40 A 50 A 40 A Silver based 12 V Pulsed driving 1.5 ms 1.5 ms -40 to +125 C Sealed PCB 18.5 x 16.2 x 16.1 mm
Smallest magnetically latched PCB relay 900 VDC 100 A, hermetically sealed DC Only set and reset pulse no continuous contactor coil power required Side or bottom mount - not position Increased ambient temperature up to sensitive 125 C Limiting continuous current up to 35 A Footprint compatible with Micro Relay K Two coils with set and reset function Minimal weight
Compliant 1 Form C 50 A on set contact, 20 A on reset contact 30 A on set contact, 20 A on reset contact 40 A on set contact, 20 A on reset contact 30 A on set contact, 15 A on reset contact Silver based 12 V Pulsed driving 1.5 ms 1.5 ms -40 to +125 C Sealed PCB 13.2 x 12.2 x 10.1 mm
RoHS Compliant 1 Form X 600 A (Make) at +400 V 1000 A (Break) at +400 V 100 A 80 A Copper based
5.5 W (standard version)/9.5 W (low pull-in version)
2 Form C 30 A 30 A
1 Form A / (2 x 87)
120 A 60 A 60 A 40 A
1 Form C
25 / 30 A (NC / NO) 25 / 30 A (NC / NO) 15 / 20 A (NC / NO) 15 / 20 A (NC / NO) Silver based 10, 12 V 0.64 W 3 ms 1.5 ms -40 to +105 C Sealed PCB - SMD Single - 13.2 x 12.2 x 11.5 Twin - 23.8 x 13.2 x 11.5 12 V 0.64 W
25 / 30 A (NC / NO) 25 / 30 A (NC / NO) 15 / 20 A (NC / NO) 15 / 20 A (NC / NO) Silver based 0.8 W 12 V 3 ms 1.5 ms -40 to +105 C Sealed / Open vent hole PCB Single - 8.1 x 14.1 x 10.3 mm Twin - 15.4 x 10.3 x 14.1 mm 0.8 W
70 A 50 A
Silver based
180 A with cable 25 mm 170 A with cable 25 mm 130 A with cable 25 mm 120 A with cable 25 mm
AgSnO2 4.1 W
0.55 W
0.57 W
1.6 W
1.6 W
1.4 W
0.9 W 2 ms
1.5 W
1.8 W
12 V
24 V
12 V
3 ms 1.5 ms -40 to +105 C Sealed / Open vent hole PCB Single - 13.2 x 12.2 x 10.1 mm (10.4 THR) Twin - 23.8 x 13.2 x 10.1 mm (10.4 THR)
8.5 ms 4 ms -40 to + 85 C Shrouded: protection class IP 67 if used with special connector Quick connect 32.7 x 35.5 x 54.2 mm
Quick connect (coil) / Screw terminals (load) Quick connect (coil) / Screw terminals (load) Quick connect (coil) / Screw terminals (load)
Features
Sensitive coil 200 mW 4 kV coil-contact Low height 10.0 mm Designed for White Goods applications (acc. IEC60335-1/30)
Sensitive coil 200 mW 4 kV coil-contact Optimized height 10.6 mm PCB area 200 mm 2
Only 5 mm wide, packing high density Sensitive coil 120 mW Cadmium free contacts
Only 5 mm wide Cadmium-free contacts Sensitive coil 170 mW 4 kV coil-contact 6 / 8 mm creepage / clearance Protection class II
Miniature size Meets 4 kV dielectric between coil and contacts (OJ / OJT) Sensitive coil 200 mW type available Meets UL TV-5 ratings (OJT) WG version (acc. IEC60335-1/30)
Compact size Meets 8 kV surge voltage between coil and contacts Cadmium-free contacts WG version (acc. IEC60335-1/30) TV-3 ratings for NO contact
Slim outline Sensitive coil 200 mW Ambient temperature 85 C Coil UL class 155 (F) insulation system WG version (acc. IEC60335-1/30)
Slim outline Sensitive coil 200 mW Meets 4 kV dielectric between coil and contacts Cadmium-free contacts WG version (acc. IEC60335-1/30) Ambient temperature 105 C (WG type) Coil UL class 155 (F) insulation system
5 kV / 8 mm coil-contact Reinforced Insulation Low height 12.3 mm Pinnings: 3.2 and 5 mm Sockets with PCB-type or screw-type terminals Reflow version available Designed for White Goods applications (acc. IEC60335-1/30)
Sensitive coil 400 mW 5 kV / 10 mm coil-contact Reinforced insulation Ambient temperature 85 or 105 C Height 15.7 mm Designed for White Goods applications (acc. IEC60335-1/30)
Sensitive DC and AC coil Bistable version 5 kV / 10 mm coil-contact Reinforced insulation Ambient temperature 85 C Height 15.7 mm THR version WG version (acc. IEC60335-1/30)
Versions: Sensitive coil 250 mW Inrush peak currents up to 165 A 105 C ambient temperature Bifurcated contacts
Meets 5 kV dielectric voltage 10 kV surge voltage between coil and contacts Version with 1 NO contact TV-5 rating (OMIT)
Meets 5 kV dielectric voltage 10 kV surge voltage between coil and contacts Meets UL TV-8 rating (1 NO contact only)
Quick connect terminals on load side Switching capacity 4000 VA Coil power 400 mW Reinforced insulation WG version (acc. IEC60335-1/30)
Insulation to VDE 0631 and VDE Meets 5 kV dielectric voltage 0700 10 kV surge voltage between Ambient temperature up to coil and contacts. 125 C #187 quick connect terminal Quick connect terminals Version with contact gap > 3 mm WG version (acc. IEC60335-1/30)
#187 quick connect terminal 20.1 mm low profile (without tab) Meets 4k V dielectric voltage between coil to contacts Ambient temperature +85 C
#187 quick connect terminal Height 26.7 mm (without tab) Meets 4 kV dielectric voltage between coil to contacts Ambient temperature +85 C
Low profile max. 20.0 mm #250 quick connect terminal Meets 4 kV dielectric voltage between coil and contact Ambient temperature +85 C
#250 quick connect terminal (PCF only) Height 26.5 mm Meets 4 kV dielectric voltage between coil and contact Ambient temperature +85 C
Meets UL TV-3, CSA TV-4 Meets UL TV-8 ratings Meets UL TV-5 and TV-8 ratings ratings (DM5 type only) Meets 4 kV dielectric voltage Immersion cleanable, sealed Meets 4 kV dielectric voltage 7 kV surge voltage between coil version available 7 kV surge voltage between coil and contacts Applications include appliance, and contacts HVAC, FPD, Monitor display
Contacts Contact arrangement SPDT / 1 Form C / 1 C/O Rated voltage DC / AC [V] Rated current [A] Rated load [W / VA] Minimum load [V / A] Coil Coil type Coil power [mW] Coil voltages [V] Insulation Breakdown voltage [Vrms] Clearance / creepage [mm] General Data Ambient temperature [C] Sealing Termination Dimensions [mm] Certifications 250 VAC 5A 1250 VA 1) DC-coil AC-coil DC-coil AC-coil Coil-contact Opened contacts Adjacent contacts DC, bistable 200 mW 3...48 VDC 4000 Vrms 1000 Vrms 3.2 / 4 mm +85 C RT II, RT III THT 20 x 10 x 10 mm VDE, cULus SPST / 1 Form A / 1 N/O 250 VAC 6/5A 1500 VA / 1250 VA 1) DC 200 / 360 mW 5...48 VDC 4000 / 3000 Vrms 1000 Vrms 4 / 4 mm +70 C RT III THT SPST / 1 Form A / 1 N/O 250 VAC / 30 VDC 3A 1250 VA / 150 W 1 mA / 5 VDC DC 120 mW 3...24 VDC 3000 Vrms 750 Vrms 3.7 / 3.7 mm +70 C RT III THT 20 x 5 x 12.5 mm UL, VDE
SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O 250 VAC 6A 1500 VA 1) DC, bistable 170 mW 5...48 VDC 4000 Vrms 1000 Vrms 6 / 8 mm +85 C RT III THT 28 x 5 x 15 mm VDE, cULus
SPST / 1 Form A / 1 N/O 250 VAC / 28 VDC 3 / 5 / 8 / 10 A 720 - 2500 VA / 90 - 240 W 100 mA at 5 VDC DC, sensitive 200 / 250 / 450 mW 5...48 VDC 3000 / 4000 Vrms 750 / 1000 Vrms 8 / > 8 mm; 3.6 / 3.6 mm up to +85 C RT II, RT III THT 18.2 x 10.2 x 14.7 mm UL, CSA, VDE, TV
SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O 277 VAC / 30 VDC 3 / 5 / 10 A 100 mA at 5 VDC DC, sensitive 200 / 400 mW 5...48 VDC 4000 Vrms 750 Vrms 3.5 / 6.7 mm +70 C (standard) +85 C (WG version) RT II, RT III THT 20 x 10 x 15.2 mm UL, CSA, VDE
SPST / 1 Form A / 1 N/O 250 VAC / 30 VDC 3/5A 1200 VA / 150 W 100 mA at 5 VDC DC 200 mW 324 VDC 4000 Vrms 750 Vrms 8 / 8 mm (WG type) +85 C RT II, RT III THT 20.4 x 6.9 x 15 mm UL, TV, CQC, VDE (in process)
SPST / 1 Form A / 1 N/O 250 VAC 3 / 5 A (WG type) 750 VA / 1250 VA (WG type) 100 mA at 5 VDC DC 200 mW 5...24 VDC 4000 Vrms 750 Vrms 8 / > 8 mm +85 C (standard) +105 C (WG version) RT II, RT III THT 20.4 x 7 x 15 mm UL, VDE, CSA
SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O 250 VAC 8A 2000 VA 1) DC 220 mW 560 VDC 5000 Vrms 1000 Vrms 8 / 8 mm +85 C RT II, RT III THT 28.5 x 10.1 x 12.3 mm VDE, cULus
SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O 250 VAC 16 A 4000 VA 24 V / 10 mA DC 400 mW 5...48 VDC 5000 Vrms 1000 Vrms 10 / 10 mm +85 C / +105 C RT II, RT III THT 29 x 12.7 x 15.7 mm VDE, cULus
SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O DPDT / 2 Form C / 2 C/O DPST / 2 Form A / 2 N/O 250 VAC 8 / 16 A 2000 VA / 4000 VA 24 V / 10 mA DC, AC, bistable 400 mW 0.75 VA 5...110 VDC 24...230 VAC 5000 Vrms 1000 Vrms 2500 Vrms 10 / 10 mm +85 C RT II, RT III THT, THR 29 x 12.7 x 15.7 mm VDE, ULus, CSA, BEAB
SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O 250 VAC 12 / 16 A 4000 VA 24 V / 10 mA DC 200 / 250 / 400 mW 5...60 VDC (110) 5000 Vrms 1000 Vrms 10 / 10 mm +85 C / +105 C RT II THT 29 x 12.7 x 15.7 mm VDE, cULus
SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O DPDT / 2 Form C / 2 C/O DPST / 2 Form A / 2 N/O 250 VAC 8 / 16 A 2000 VA / 4000 VA 24 V / 10 mA DC, AC 500 mW 0.75 VA 5...110 VDC 24...230 VAC 4000 Vrms 1000 Vrms 2500 Vrms 8 / 8 mm +70 C / +85 C RT II THT 29 x 12.7 x 15.7 mm VDE, cULus
SPST / 1 Form A / 1 N/O 250 VAC 16 A 4000 VA 1) DC 500 mW 6...110 VDC 4000 Vrms 2000 Vrms 8 / 8 mm +70 C RT II, RT III THT 29 x 12.6 x 25.5 mm VDE, cULus
SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O 250 VAC / 30 VDC 10 / 16 A 2400 VA / 300 W, 3800 VA / 480 W 100 mA at 5 VDC DC 540 / 720 mW 5...48 VDC 5000 Vrms 1000 Vrms > 8 / > 8 mm +60 C (standard) +70 C (sensitive) RT II, RT III THT 29.2 x 12.8 x 20.6 mm UL, CSA, VDE, SEMKO
SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O 240 VAC / 30VDC 16 A 3850 VA / 600 mW 100 mA at 5 VDC DC 540 / 720 mW 5...48 VDC 5000 Vrms 1000 Vrms > 8 / > 8 mm +55 C (standard) +70 C (sensitive) RT II, RT III THT 29.2 x 12.8 x 20.6 mm UL, CSA, TV
SPST / 1 Form A / 1 N/O SPSD / 1 Form B / 1 N/C 250 VAC 16 A 4000 VA 1) DC 400 mW 560 VDC 4000 Vrms 1000 Vrms 8 / 8 mm +85 C / +105 C RT II THT, Quick connect 40.5 x 12.7 x 16 mm VDE, cULus
SPST / 1 Form A / 1 N/O SPSD / 1 Form B / 1 N/C 250 VAC 16 A 4000 VA 500 mA / 12 VAC DC 360 mW 6...60 VDC 4000 Vrms 1000 Vrms 8 / 8 mm +125 C RT II THT, Quick connect 40.5 x 12.5 x 28.5 mm VDE, cULu, BEAB, SEMKO, SEV
SPST / 1 Form A / 1 N/O 240 / 250 VAC 30VDC 16 A 4000 VA / 385 W 100 mA at 5 VDC DC 540 mW 1224 VDC 5000 Vrms 1000 Vrms
SPST / 1 Form A / 1 N/O 250 VAC 16 A 4000 VA 100 mA at 5 VDC DC 500 mW 548 VDC 5000 Vrms 1000 Vrms 6.4 / 9.5 mm
SPST / 1 Form A / 1 N/O 277 VAC 16 A 4000 VA 100 mA at 5 VDC DC 500 mW 524 VDC 5000 Vrms 1000 Vrms 6.4 / 9.5 mm +70 C RT II THT, #187 quick connect 22.8 x 11.6 x 26.7 mm UL, CSA, VDE
SPST / 1 Form A / 1 N/O 250 VAC 20 A 5000 VA 100 mA at 5 VDC DC 900 mW 548 VDC 4000 Vrms 1000 Vrms 6.4 / 9.5 mm +85 C RT II THT, #250 quick connect 30.4 x 16.0 x 20 mm UL, TV
SPST / 1 Form A / 1 N/O 250 VAC 25 A 6370 VA 100 mA at 5 VDC DC 900 mW 624 VDC 4000 Vrms 1000 Vrms 6.7 / > 8 mm +85 C RT II THT, #250 quick connect 30.4 x 16 x 26.5 mm UL, CSA, TV
DPST / 2 Form A / 2 N/O 120, 240 VAC / 24, 30 VDC 3A/5A 300 VA / 1100 VA 100 mA at 5 VDC DC 540 mW 5...48 VDC 4000 Vrms 1000 Vrms 2000 Vrms 7.1 / 7.1 mm +70 C RT II, RT III THT 24.4 x 12.9 x 25 mm UL, CSA, TV, SEMKO
SPST / 1 Form A / 1 N/O 240 VAC / 24 VDC 16 A 2400 VA, 380 W 100 mA at 5 VDC DC 540 mW 548 VDC 4000 Vrms 1000 Vrms > 8 / > 8 mm +65 C RT II, RT III THT 24.4 x 12.9 x 24.8 mm UL, CSA, TV
SPST / 1 Form A / 1 N/O 250 VAC / 30 VDC 5 A, 10 A 100 mA at 5VDC DC 250 / 540 mW 5...48 VDC 4000 Vrms 1000 Vrms 6.7 / 6.7 mm +70 C RT II, RT III THT 24.4 x 10.4 x 25.0 mm UL, CSA, SEMKO, TV, SEV
+70 C RT II THT, #187 quick connect 29.0 x 12.6 x 34.3 mm UL, CSA, VDE, TV
VDE, cULus
1) Recommended minimum load indication for contact material: Au and gold plated: 1 mA at 6 V;
Ag, AgNi0,15 and AgNi90/10: 10 mA at 12 V; AgCdO and AgSnO2: 100 mA at 12 V; Please contact technical support for detailed technical data.
Safety Relays
SR2M SR4 D / M SR6
Features
Designed for thermostat, modem, computer peripherals, video recording and security applications Low coil power requirement for IC compatibility
Gold overlay silver palladium alloy contact suitable for low loads High density available on PCB due to small size 2.54 mm terminal pitch same as IC socket terminal pitch Sensitive and standard coils
Low profile miniature power relay High density available on PCB due to small size Meets 2 kV dielectric between coil and contacts Meets 5 kV surge voltage
For use in small home Environmentally-friendly appliances such as irons, cadmium-free contacts vacuum cleaners, gaming etc. Creepage / clearance to WG version (acc. IEC60335-1/30) VDE 0435 and VDE 0700 for applications as laundry, Class F coil available dryer and hot applications Designed for White Goods applications (acc. IEC60335-1/30) Low-profile, low cost relay
Low cost, small package, 10 A Low cost, small package, 12 A switching capacity switching capacity (at 120 VAC) UL Class F (155 C) insulation Applications include appliance, system standard HVAC, security system, garage Immersion cleanable, sealed opener control, emergency version available lighting WG version (acc. IEC60335-1/30)
High performance Sugar Cube Relay Designed for White Goods applications (acc. IEC60335-1/30) such as hot applications i.e. touch controls 16 A at 85 C 10 A at 105 C
Low coil power 200 mW Height 10.2 mm Wash tight Version with quick connect terminals
Specially designed to meets the requirements for the solar inverter industry Contact gap > 1.5 mm 200 mW hold power
High breaking capacity PCB- and quick connections and chassis mount version UL-class F as standard Ambient temperature +85 C Open version available
Switching capacity 7500 VA DC- or AC coil 4 kV / 8 mm coil-contact Insulation to VDE 0631 and VDE 0700 PCB- or quick connections or chassis mount
80 A switching capacity DC-1 Utilization category, fulfills Heavy load 20.000 VA IEC 60947-4-1 / GB 14048.4 1 coil latching Typical applications include 4000 VAC coil to contact dielec- battery switching and backup, tric endurance DC voltage power control, circuit protection and safety
4 kV / 8 mm coil-contact DC- or AC coil PCB mounting or Quick connect Mounting brackets or snap mounting
Contact gap > 3 mm Switching capacity 4000 VA DC- or AC coil Safety mains insulation 4 kV / 8 mm coil-contact Quick connect terminals Snap or screw mount
Relay with forcibly guided contacts according to EN 50205 6 kV surge resistance between poles DIN rail mount module version
Relay with forcibly guided contacts according to EN 50205 DIN rail mount module version
Sensitive coil Low height 29 / 33 mm Cadmium-free contacts Mechanical indicator Manual test tab, optionally lockable Optional LED, protection diode
Mounting options include socket, PCB, top flange LED versions available
Industry standard octal / undecal type termination for quick installation DC- and AC-coils Mechanical indicator, indicator lamp and push-to-test options
Wide selection of termination and mounting styles PC terminals available Push to test button and indicator lamps Complete line of sockets and DIN rail mounting Class B coil insulation SPDT / 1 Form C / 1 C/O DPDT / 2 Form C / 2 C/O 3PDT / 3 Form C / 3 C/O 4PDT / 4 Form C / 4 C/O 230 / 400 VAC 10 / 16 / 25 / 30 A 2400 VA
1)
Contacts Contact arrangement SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O Rated voltage DC / AC [V] Rated current [A] Rated load [W / VA] Minimum load [V / A] Coil Coil type Coil power [mW] Coil voltages [V] Insulation Breakdown voltage [Vrms] Clearance / creepage [mm] General Data Ambient temperature [C] Sealing Termination Dimensions [mm] Certifications 120 VAC / 24 VDC 1A 120 VA / 24 W 1 mA at 1 VDC DC, sensitive 150 / 300 mW 5...24 VDC 1000 Vrms 400 Vrms 1.5 / 1.5 mm +80 C RT II, RT III THT 12.5 x 7.4 x 9.9 mm UL, CSA SPDT / 1 Form C / 1 C/O SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O 120 VAC / 28 VDC 10 A 1200 VA / 300 W 100 mA at 5 VDC DC 450 mW 3...48 VDC 2000 Vrms 750 Vrms 4.4 / 4.4 mm +60 C RT II, RT III THT 21.8 x 17.1 x 15.3 mm UL, CSA SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O 250 VAC 10 A 2500 VA
1)
SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O 250 VAC / 28 VDC 6 A / 10 A 2500 VA / 280 mW 100 mA at 5 VDC DC 360 mW 348 VDC 1500 Vrms 750 Vrms 2.5 / 2.5 mm +85 C RT II, RT III THT 19.2 x 15.5 x 15.3 mm VDE, ULus, TV
SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O 250 VAC / 28 VDC 10 A 2500 VA / 280 mW 100 mA at 5 VDC DC 360 mW 5...48 VDC 2000 Vrms 750 Vrms 2 / 3 mm +85 C RT II, RT III THT 22 x 16 x 16.4 mm UL, CSA, VDE
SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O 240 VAC / 28 VDC 10 A 2400 VA / 300 W 100 mA at 5 VDC DC 360 mW 5...48 VDC 1500 Vrms 750 Vrms 2.5 / 2.5 mm +60 C RT II, RT III THT 20.2 x 16.5 x 20.2 mm UL, CSA, TV
SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O 250 VAC 10 A / 16 A 2500 VA / 4000 VA 100 mA at 5 VDC DC 400 mW 5...48 VDC 2000 Vrms 1000 Vrms 2.5 / 2.5 mm +105 C / +85 C RT II THT 20.2 x 16.5 x 20.2 mm VDE, cULus
SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O 250 VAC 30 A 7500 VA 1 A at 5 VDC or 12 VAC DC, AC 1W 1.2 VA 6...48 VDC 12240 VAC 2500 Vrms 1500 Vrms 3.1 / 6.3 mm +85 C RT III THT, Quick connect 32.3 x 27.4 x 20.4 mm UL, CSA
DPDT / 2 Form C / 2 C/O DPST / 2 Form A / 2 N/O 400 VAC 30 A 7500 VA 100 mA at 6 VAC / VDC DC, AC 1.7 W 4.0 VA 6...48 VDC 24...240 VAC 4000 Vrms 1500 Vrms 2000 Vrms 8 / 9.5 mm +65 C / +85 C RT II, RT III THT, Quick connect 52.3 x 34.6 x 30.8 mm VDE, UL, CSA
1 Form X (SPST-NO-DM)
DPST / 1 Form A + 1 Form B / 1 N/O + 1 N/C DPDT / 2 Form C / 2 C/O 250 VAC 6A 1500 VA > 50 mW DC 700 mW 5...110 VDC 4000 Vrms 1000 Vrms 3000 Vrms 8 / 8 mm +70 C RT III THT 29 x 12.6 x 25.5 mm VDE, ULus, TV
4PST / 2 Form A + 2 Form B / 2 N/O + 2 N/C 4PST / 3 Form A + 1 Form B / 3 N/O + 1 N/C 250 VAC 8A 2000 VA > 50 mW DC 800 mW 5...110 VDC 4000 Vrms 1000 Vrms 2500 Vrms 8 / 8 mm +70C RT III THT 40 x 13 x 16 mm
120 VAC / 24 VDC 1A 120 VA / 30 W 1 mA at 1 VDC DC, sensitive 200 / 450 mW 5...24 VDC 1000 Vrms 500 Vrms 1.6 / 1.6 mm
+75 C (sensitive) / +60 C (standard)
250 VAC / 24 VDC 10 A 1800 VA, 240 W 100 mA at 5 VDC DC 200 mW 5...48 VDC 2000 Vrms 1000 Vrms 4 mm +70 C RT II, RT III THT, Quick connect 23 x 16.1 x 10.2 mm cULus, TV
250 VAC 80 A 20000 VA 100 mA at 12 VAC DC 1W 524 VDC 4000 Vrms 1500 Vrms 6 / 6 mm +70 C RT I THT, Quick connect 36.8 17.2 x 30.4 mm UL, CQC
6PST / 4 Form A + 2 Form B / 4 N/O + 2 N/C 6PST / 3 Form A + 3 Form B / 3 N/O + 3 N/C 6PST / 5 Form A + 1 Form B / 5 N/O + 1 N/C 250 VAC 8A 2000 VA > 50 mW DC 1200 mW / 800 mW 5...110 VDC 3000 Vrms 1000 Vrms 3000 Vrms 5.5 / 5.5 mm +70 C RT III THT 55 x 16.5 x 16 mm VDE, ULus, TV
SPDT / 1 Form C / 1 C/O DPDT / 2 Form C / 2 C/O 240 VAC 16 A / 8 A 4000 VA / 2000 VA
1)
DPDT / 2 Form C / 2 C/O 3PDT / 3 Form C / 3 C/O 4PDT / 4 Form C / 4 C/O 240 VAC 12 A / 10 A / 5/6 A 3000 VA / 2500 VA / 1500 VA 1), Bifurcated contacts for dry circuit available on KH DC, AC 750 / 900 mW 1 / 1.2 VA 6...220 VDC 6...240 VAC 2500 Vrms 1200 Vrms 2000 / 2500 Vrms 4 / 4 mm +70 C RT II Quick connect, solder 28 x 22.5 x 29 / 30 / 33 mm VDE, ULus, Lloyds, CSA
SPDT / 1 Form C / 1 C/O DPDT / 2 Form C / 2 C/O 3PDT / 3 Form C / 3 C/O 28 VDC / 240 VAC 10 A
DC 360 mW 5, 6, 12, 24 VDC 2500 Vrms 1000 Vrms 3 / 4 mm +85 C RT II THT 15 x 15 x 20 mm VDE, cULus
DC 1.5 W / 200 mW hold Power 12 V 4000 Vrms 2500 Vrms 6.1 / 6.1 mm +85 C RT II THT 30.4 x 26.5 x 16 VDE, cULus
DC 4.8 W 12...24 VDC 2000 Vrms 750 Vrms 2.0 / 2.5mm +85 C RT III M6 screw 86 x 52 X 80.9 mm VDE, CQC
DC, AC 1W 1.8 VA 6...110 VDC 6...240 VAC 4000 Vrms 1000 Vrms 8 / 8 mm +70 C RT I THT, Quick connect 35.5 x 16.4 x 30.5 mm VDE, UL
DC, AC 1.3 W 2.0...2.5 VA 6...24 VDC 120...400 VAC 4000 Vrms 2000 Vrms 8 / 8 mm +90 C RT I Quick connect 47 x 24 x 47 mm VDE, UL, KEMA-KEUR, SEMKO, DEMKO, NEMKO
DC 170 mW 560 VDC 4000 Vrms 1000 Vrms 6 / 8 mm Relay +85 C RT III Plug-in 28 x 5 x 15 mm VDE, cULus
DC, AC 400 mW 0.75 VA 6...110 VDC 24...230 VAC 4000 / 5000 Vrms 1000 Vrms 2500 Vrms 8 / 8 mm +70 C / +85 C RT II Plug-in 29 x 12.7 x 26.7 mm VDE, ULus, Lloyds
DC, AC 750 / 900 mW 1 / 1.2 VA 12220 VDC 12...240 VAC 1500 Vrms 1200 Vrms 2500 Vrms 3.1 / 3.1 mm +70 C RT II Quick connect, solder 21.2 x 27.5 x 34.9 mm UL, CSA
DC, AC 1.2 W 2 / 2.3 VA 6...220 VDC 6...240 VAC 2500 Vrms 1500 Vrms 2500 Vrms 2.8 / 4 mm DC: +60 C / 70 C, AC: 50 C / 55 C RT I Plug-in 35.5 x 35.5 x 57 VDE, ULus, CSA
DC, AC 1.2...1.8 W 2...2.8 VA 6...220 VDC 6...240 VAC 2200 / 3750 Vrms 1200 / 3500 Vrms 3.5 / 6 mm +45 C to +95 C RT I Quick connect, Plug-in 38.5 x 35.5 x 48.5 VDE, ULus, CSA
DC, AC 1.6 W dual coil / 1.2 W single coil 12...48 VDC single or dual 24...240 VAC single; 24...120 VAC dual 500 Vrms 1500 Vrms 1500 Vrms
1) Recommended minimum load indication for contact material: Au and gold plated: 1 mA at 6 V;
Ag, AgNi0,15 and AgNi90/10: 10 mA at 12 V; AgCdO and AgSnO2: 100 mA at 12 V; Please contact technical support for detailed technical data.
Features
Dual coil latching to accept momentary impulse to one coil to latch and second impulse to the other coil to release
Contact ratings to 50 A 3-pole switching plus integral Magnetic blowout available for auxiliary contacts DIN rail mounting switching DC loads SPDT auxiliary switch available Finger safe (IP20) terminals Bimetallic Thermal Overload relay can be added to create a starter Additional auxiliary switches (side or top mount) as well as timer blocks are available SPDT / 1 Form C / 1 C/O DPDT / 2 Form C / 2 C/O 277 VAC, 28 / 125 VDC 50 A, 60 / 30 A 1 A, 12 VDC or VAC
DIN rail and PCB sockets Relay Package consisting of Screw and screwless fingersafe relay, DIN rail socket, plastic terminals retaining clip, marking tag and module Retaining and ejection clips Marking tags, jumper bars LED and protection modules
Features
4G Telecom / Signal relay Slim line 10 x 6 mm and Low profile 5.65 mm High Dielectric version High current version High stability version THT, SMT, Gull Wing, J- Leg 2 - 5 A UL rating DPDT / 2 Form C / 2C/O Bifurcated contacts 220 VAC / 250 VDC 2A/5A 60 W / 62.5 VA < 50 m 100 V / 1 A Non latching Latching 1 coil Latching 2 coils Polarized 50200 mW 100200 mW 1.5...24 V 15001800 Vrms 10001500 Vrms 10001800 Vrms 2500 Vp 15002500 Vp 15002500 Vp -37.0 dB / -18.8 dB -0.03 dB / -0.33 dB 1.06 / 1.49 max. 1 pF -40 to +85 C (125 C ) IP67 / RT V THT, SMT 10 x 6 x 5.65 mm cULus, Telcordia, IEC 60950
4G Telecom / Signal relay 2 pole make or brake Slim line 10 x 6 mm and Low profile 5.65 mm High Dielectric version THT, SMT, Gull Wing 2 - 5 A UL rating
4G Telecom / Signal relay 1 pole make, break or change-over Slim line 10 x 6 mm and Low profile 5.65 mm High Dielectric version THT, SMT, Gull Wing 2 - 5 A UL rating SPST / 1 Form B / 1N/C SPST / 1 Form A / 1N/O SPDT / 1 Form C / 1C/O Bifurcated contacts 220 VAC / 250 VDC 2A/5A 60 W / 62.5 VA < 100 m 100 V / 1 A Polarized 140 mW 1.5...24 V 4000 Vrms / IMC 3000 Vrms 2500 Vrms / IMC 1000 Vrms 5600 Vp / IMC 4200 Vp 3500 Vp / IMC 1500 Vp -33.0 dB / - 13.5 dB -0.06 dB / -1.00 dB 1.10 / 2.00 / IMC 1.04 / 1.33 max. 1 pF -40 to +85 C IP67 / RT V THT, SMT 10 x 6 x 5.65 mm cULus, Telcordia, IEC 60950
3G Telecom / Signal Relay Slim line 15 x 7.5 mm Switching current max. 5 A High Dielectric Version
3G Telecom / Signal Relay Slim line 15 x 7.5 mm Standard and sensitive coil 1800 Vrms between all poles High mechanical shock resistance
3G Telecom / Signal Relay Slim line 15 x 7.5 mm Standard and sensitive coil 125 C. ambient temperature Suitable for explosive enviroments High Dielectric version
3G Telecom / Signal Relay Low profile 5 mm Standard and sensitive coil High mechanical shock resistance
Very high sensitive Relay Multi purpose Relay with Low profile switching current up to 3 A High vibration and shock resistance Temp. range up to 85 C 1500 Vrms across opened contacts
Direct driving with TTL signals Ultrasonic cleanable High switching speed Clamping Diode Electrostatic shield
Direct driving with TTL signals Ultrasonic cleanable High switching speed Clamping Diode
Very high reliability Great variety of coils and contact sets Accessories for socked mounting
High performance / low cost small high frequency Relay / Switch up to 3 GHz Low power consumption 70 mW / 140 mW 50 and 75 version
High performance small high frequency Relay / Switch up to 3 GHz Low power consumption 70 mW / 140 mW 50 and 75 version RF power 150 W at 2 GHz
High performance small high frequency Relay / Switch up to 6 GHz Low power consumption 70 mW / 140 mW 50 version
Contacts Contact arrangement SPDT / 1 Form C / 1 C/O DPDT / 2 Form C / 2 C/O 3PDT / 3 Form C / 3 C/O 4PDT / 4 Form C / 4 C/O 240 / 250 VAC 616 A SPDT / 1 Form C / 1 C/O DPDT / 2 Form C / 2 C/O 3PDT / 3 Form C / 3 C/O 4PDT / 4 Form C / 4 C/O 240 / 250 VAC 616 A 15004000 VA 1) DC, AC 170 700 mW 0.4 1 VA 6...220 VDC 6...230 VAC According to the used relay According to the used relay According to the used relay According to the used relay According to the used relay IP 20 Screw, screwless, PCB VDE, cULus According to the used relay According to the used relay According to the used relay According to the used relay According to the used relay Screw, screwless VDE, cULus
DPDT / 2 Form C / 2 C/O 4PDT / 4 Form C / 4 C/O 5PDT / 5 Form C / 5 C/O 120 VAC 10 A
3PST / DM / N/O See rating tables in PBC data sheet 1-1773450-4 9...80 A
DPST / 2 Form B / 2N/C DPST / 2 Form A / 2N/O Bifurcated contacts 220 VAC / 250 VDC 2A 60 W / 62.5 VA < 50 m 100 V / 1 A Polarized 140 mW 1.5...24 V 1800 Vrms 1000 Vrms 1000 Vrms 2500 Vp 1500 Vp 1500 Vp -37.0 dB / -18.8 dB -0.03 dB / -0.33 dB 1.06 / 1.49 max. 1 pF -40 to +85 C IP67 / RT V THT, SMT 10 x 6 x 5.65 mm cULus, Telcordia, IEC 60950
DPDT / 2 Form C / 2C/O Bifurcated contacts 220 VAC / 250 VDC 2A 60 W / 62.5 VA < 50 m 100 V / 1 A Polarized 140 mW 140 mW 140 mW 3...24 V 1500 Vrms 10001500 Vrms 10001500 Vrms 2500 Vp 2500 Vp 2000 Vp -39.0 dB / -20.7 dB -0.02 dB / -0.27 dB 1.04 / 1.40 max. 1 pF -40 to +85 C IP67 / RT III THT, SMT 14.5 x 7.2 x 10.4 mm cULus, Telcordia, IEC 60950
DPDT / 2 Form C / 2C/O Bifurcated contacts 220 VAC / 250 VDC 2A 60 W / 62.5 VA < 70 m 100 V / 1 A Polarized 80300 mW 100150 mW 348 V 2700 Vrms 1800 Vrms 1800 Vrms 4000 Vp 2500 Vp 2500 Vp -34.0 dB / -15.1 dB -0.03 dB / -0.60 dB 1.07 / 1.45 max. 2 pF -55 to +85 C IP67 / RT V THT 15 x 7.3 x 10.7 mm cULus, Telcordia, IEC 60950
DPDT / 2 Form C / 2C/O Bifurcated contacts 220 VAC / 250 VDC 2A 60 W / 62.5 VA < 50 m 100 V / 10 A Non polarized 200300 mW 348 V 15004000 Vrms 15001800 Vrms 10001500 Vrms 25006000 Vp 1500...2500 Vp 1500...2500 Vp -30.6 dB / -13.7 dB -0.02 dB / -0.50 dB 1.02 / 1.27 max. 1 pF -55 to +125 C IP67 / RT III / RT V THT, SMT 15 x 7.5 x 9.6 mm cULus, Telcordia, IEC 60950
DPDT / 2 Form C / 2C/O Bifurcated contacts 220 VAC / 250 VDC 2A 60 W / 62.5 VA < 50 m 100 V / 1 A Polarized 80300 mW 100150 mW 200 mW 348 V 1000 Vrms 1000 Vrms 750 Vrms 1500 Vp 1500 Vp 1500 Vp -40.2 dB / -22.3 dB -0.03 dB / -0.25 dB 1.01 / 1.07 max. 1 pF -55 to +85 C IP67 / RT III THT 14 x 9 x 5 mm
DPDT / 2 Form C / 2C/O Single contacts 220 VAC / 250 VDC 3A 60 W / 125 VA < 100 m 100 V / 10 A Non polarized 150700 mW 348 V 1000 Vrms 750 Vrms 750 Vrms 1500 Vp 1500 Vp 1500 Vp -39.0 dB / -20.7 dB -0.02 dB / -0.27 dB 1.04 / 1.40 max. 2 pF -25 to +85 C IP67 / RT III THT 20 x 10 x 11 mm
DPDT / 2 Form C / 2C/O Bifurcated contacts 220 VAC / 250 VDC 2A 60 W / 62.5 VA < 70 m 100 V / 1 A Non polarized 150550 mW 348 V 1000 Vrms 750 Vrms 750 Vrms 1500 Vp 1500 Vp 1500 Vp -31.8 dB / -14.2 dB -0.02 dB / -0.97 dB 1.03 / 1.31 max. 1 pF -55 to +85 C IP67 / RT III THT 20 x 10 x 11 mm
SPDT / 1 Form C / 1C/O Bifurcated contacts 125 VAC / 150 VDC 1A 30 W / 60 VA < 50 m 100 V / 1 A Polarized 65130 mW 30130 mW 70200 mW 324 V 500 Vrms 2500 Vp -30.0 dB / -18.0 dB -0.12 dB / -1.90 dB 1.06 / 1.75 max. 5 pF -40 to +70 C IP67 / RT III THT, SMT 13 x 7.6 x 6.9 mm cULus, IEC 60950
SPDT / 1 Form C / 1C/O Single contacts 60 VAC / 125 VDC 13 A 3072 W / 60360 VA < 100 m Non polarized 200450 mW 1.524 V 1000 Vrms 750 Vrms
Rated voltage DC / AC [V] Rated current [A] Rated load [W / VA] Minimum load [V / A] Coil Coil type Coil power [mW] Coil voltages [V] Insulation Breakdown voltage [Vrms] Clearance / creepage [mm] General Data Ambient temperature [C] Sealing Termination Dimensions [mm] Certifications
Rated voltage Rated current Rated load Contact resistance, initial Minimum load * Coil Coil type Coil power Coil voltages Insulation Breakdown voltage
SPST / 1 Form A / 1N/O DPST / 2 Form A / 2N/O SPDT / 1 Form C / 1C/O Reed contacts 175200 VAC / VDC 0.250.5 A 310 W < 150 m 10 V / 1 A Non polarized 50300 mW 524 V 1000 Vrms 140175 Vrms
SPST / 1 Form A / 1N/O Reed contacts 180200 VAC / VDC 0.5 A 10 W < 150 m 10 V / 1 A Non polarized 50300 mW 524 V 1000 Vrms 150175 Vrms
Various 30 250 VAC / VDC 0.25 A 5500 W on request Non polarized / Polarized 14501650 mW 14501650 mW 5220 VDC / 6230 VAC 5002000 Vrms 5001000 Vrms on request
SPDT / 1 Form C / 1C/O Bridge contacts 220 VAC / 250 VDC 2A 60 W / 62.5 VA / 50 W (2.5 GHz) < 100 m 100 V / 1 A Polarized 140 mW 70 mW 140 mW 324 V 1000 Vrms 600 Vrms 1500 Vp 1000 Vp -80 dB / -72 dB / -45 dB -0.03 dB / 0.12 dB / -0.35 dB 1.05 / 1.15 / 1.20 max. 1 pF -55 to +85 C IP67 / RT III SMT 14.6 x 7.2 x 10 mm
SPDT / 1 Form C / 1C/O Bridge contacts 220 VAC / 250 VDC 2A 60 W / 62.5 VA / 50 W (2.5 GHz) < 100 m 100 V / 1 A Polarized 140 mW 70 mW 140 mW 324 V 1000 Vrms 600 Vrms 1500 Vp 1000 Vp -95 dB / -80 dB / -55 dB -0.03 dB / -0.12 dB / -0.30 dB 1.05 / 1.10 / 1.25 max. 1 pF -55 to +85 C IP67 / RT III SMT 15 x 7.6 x 10.6 mm
SPDT / 1 Form C / 1C/O Bridge contacts 220 VAC / 250 VDC 2A 60 W / 62.5 VA / 50 W (2.5 GHz) < 100 m 100 V / 1 A Polarized 140 mW 70 mW 140 mW 324 V 1000 Vrms 600 Vrms 1500 Vp 1000 Vp -80 dB / -60 dB / -30 dB -0.05 dB / -0.15 dB / -0.80 dB 1.05 / 1.10 / 1.40 max. 1 pF -55 to +85 C IP67 / RT III SMT 15 x 7.6 x 10.6 mm
DC, AC 2.7 W DC 5.3 to 7.8 W AC 12...110 VDC 24...240 VAC 500 Vrms 1000 Vrms 1000 Vrms
DC, AC 2W 9.8 VA 6...220 VDC 6...480 VAC 2000 Vrms 2000 Vrms 2000 Vrms DC: +80 C, AC: +45 C RT 0 / open Screw, Quick connect 56.6 / 76.2 x 63.8 x 63.5 mm UL, CSA
AC
2500 V (1 min) 2500 V (1 min) 2500 V (1 min) -5 C to +40 C Screw clamp cULus, IEC 60947
Automotive Relays and Switching Modules Tyco Electronics AMP GmbH Paulsternstr. 32 13629 Berlin / Germany Product Information Center: Phone: +49-(0)30-38638-775 E-Mail: Berlin-Automotive-Relays@tycoelectronics.com
General Purpose Relays Tyco Electronics Austria GmbH Pilzgasse 33 A-1210 Wien / Austria Product Information Center: Phone: +49-(0)30-38638-775 E-Mail: GERMANY-PIC@tycoelectronics.com
Telecom-Signal and RF Relays / Switches Tyco Electronics Logistics AG Seestrasse 295 CH-8804 Au / Switzerland Phone: +41-(0)44-782 91 11 E-Mail: axicom@tycoelectronics.com
Coil-contacts Opened contacts Adjacent contacts Breakdown voltage pulse Coil-contacts Opened contacts 2 / 10 s / 10 / 700 s Adjacent contacts RF characteristics Isolation at 100 MHz / 900 MHz / 3 GHz Insertion loss V:S:W:R: Capacitance between opened contacts General Data Ambient temperature Sealing Termination Dimensions Certifications
*
All specifications subject to change. Consult Tyco Electronics for latest specifications http://relays.tycoelectronics.com http://www.tycoelectronics.com AXICOM, OEG, Potter & Brumfield, SCHRACK, TE Logo and Tyco Electronics are trademarks 2008 Tyco Electronics Ltd. 1308219-2 Revised 11-2008 5M WR
RoHS
Ready