Beruflich Dokumente
Kultur Dokumente
Model Performance
Several model performance curves have been included to show how accurately the models match the actual device characteristics. The squares shown in the graphs represent data points taken from the data sheet. These data points show that the model correlates closely to the data sheet specifications.
Model Description
While this model was developed for the PSPICE simulator from MicroSim Corporation, it may be adaptable to other simulators. The performance curves included in this document were generated using PSPICE. SPICE simulations should not be considered a substitute for breadboarding a circuit; rather, they should be used to select preliminary component values and to verify the validity of a design approach. This model emulates typical rather than worst case devices, at an ambient temperature of 25oC.
1-888-INTERSIL or 321-724-7143
| Intersil and Design is a trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2001, All Rights Reserved
EG = ISE = BR = RC = FC = TR = VTF =
EG = ISE = BR = RC = FC = TR = VTF =
EG = ISE = BR = RC = FC = TR = VTF =
300
80
200 60 100
0h 100
300
1.0m
3.0m
10m
30m
100m
40 10
100
1.0m
10m
100m
FIGURE 1. CA3046 f T vs IC
1.0
1.0
0.9
0.8
0.5
0.4 100m
300m
1.0
3.0
10
300m
1.0
3.0
10
30
100
1.0
0.8 (V)
0.6
0.4
0.2
0 100
300
1.0m
3.0m
10m
30m
100m
1.08
60
0.96 1.0
2.0
3.0
4.0
5.0
7.0
9.0
300
1.0m
3.0m
10m
30m
100m
FIGURE 6. CA3127 f T vs IC
700
280
600 240 500 (F) (F) 400 160 300 200 100m 200
300m
1.0
3.0
10
120 100m
300m
1.0
3.0
10
30
100
1.0
0.8 (V)
0.6
0.4
0.2
0 100 300 1.0m 3.0m 10m 30m 100m COLLECTOR CURRENT (A)
300
80
300A
1.0m
3.0m
10m
30m
100m
300A
30m
100m
1.0
1.0
0.9 0.8
0.8
0.6 (pF) 0.7 (pF) 0.4 0.6 0.5 0.2 300mV 1.0 3.0 EMITTER-BASE VOLTAGE (V) 10 0 100
0.4 100mV
30
100
1.2 1.0
0.8 (V)
0.6
0.4 0.2
0 100
300
1.0m
3.0m
10m
30m
100m
All Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporations quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com