Sie sind auf Seite 1von 6

Standards Status Report

as of January 27, 2012


Priority: H = High = PINS submitted. Work on a revision has or should be initiated immediately and final action completed within a year of the PINS submittal; M = Medium = PINS submitted. Work on a revision has or should be initiated within 12 months of PINS submittal; L = Low = Up to date. No action on a revision anticipated for the next 6 months

Document

Resp PINS

MC Ballot

Public Review Period

Board Ballot/ Approval

To TP

Fr TP

To Comte

BSR9

PRIORITY

ASME MFC-1M-2003 (R2008) Glossary of Terms Used in the Measurement of Fluid Flow in Pipes (w/Addenda Service) ANSI approved September 10, 2003 Reaffirmed March 10, 2008 Prev Editions: 1979, 1991 ASME MFC-2.1M-1983 (R2006), Uncertainty for Fluid Flow in Closed Conduits ANSI reaffirmed on September 8, 2006 BSR-11 submitted expires January 19, 2014 ASME MFC-2.2, ASME MFC-3M-2004, Measurement of Fluid Flow in Pipes Using Orifice, Nozzle and Venturi (w/Addenda Service) ANSI approved February 3, 2004 Prev Editions: 1984, 1985, 1989 ASME MFC-3Ma-2007

SC1 Rev

SC2 Rev SC2 New

SC3 Rev 437

SC3 ANSI approved October 11, 2007 ASME MFC-4M-1986 (R2008), Measurement of Gas Flow by Turbine Meters SC4 ANSI reaffirmed May 22, 2003 Reaffirmed March 10, 2008 Prev Editions: 1986 M

Standards Status Report


as of January 27, 2012
Priority: H = High = PINS submitted. Work on a revision has or should be initiated immediately and final action completed within a year of the PINS submittal; M = Medium = PINS submitted. Work on a revision has or should be initiated within 12 months of PINS submittal; L = Low = Up to date. No action on a revision anticipated for the next 6 months

Document

Resp PINS

MC Ballot

Public Review Period

Board Ballot/ Approval

To TP

Fr TP

To Comte

BSR9

PRIORITY

ASME MFC-5M-1985 (R2006), Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters To be revised and partitioned as MFC-5.1, MFC-5.2, and MFC-5.3 MFC-5.1-2011 Measurement of Liquid Flow in Closed Conduits Using Transit Time Ultrasonic Flowmeters ANSI Approval: January 28, 2011 MFC-5.2 Measurement of Liquid Flow in Closed Conduits Using Cross-correlation Ultrasonic Flowmeters MFC-5.3 Measurement of Liquid Flow in Closed Conduits Using Doppler Ultrasonic Flowmeters ASME MFC-6M-1998 (R2005), Measurement of Fluid Flow in Pipes Using Vortex Flow Meters ANSI reaffirmed on January 13, 2005 Prev Editions: 1987 BSR-11 submitted April 17, 2010 and expiring April 17, 2013 ASME MFC-6M-1998 (R2005 DEVELOPMENT SCHEDULE

SC5

Withdrawn on January 28, 2011

SC5

SC5 New 091217 SC5 New 091217 120127 120224

SC6 Revision 100411

DEC 2010 JUN 2011 JUN 2011 JUN 2011 FEB 2012 AUG2012 AUG2012 AUG2012

AUG2011 OCT2012

Standards Status Report


as of January 27, 2012
Priority: H = High = PINS submitted. Work on a revision has or should be initiated immediately and final action completed within a year of the PINS submittal; M = Medium = PINS submitted. Work on a revision has or should be initiated within 12 months of PINS submittal; L = Low = Up to date. No action on a revision anticipated for the next 6 months

Document

Resp PINS

MC Ballot

Public Review Period

Board Ballot/ Approval

To TP

Fr TP

To Comte

BSR9

PRIORITY

ASME MFC-7M-1987 (R2006), Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles ANSI reaffirmed on September 8, 2006 BSR-11 submitted expires January 19, 2014 ASME MFC-8M-2001 (R2011), Fluid Flow in Closed Conduits Connections for Pressure Signal Transmissions between Primary and Secondary Devices

SC7

SC8 ANSI approved May 24, 2001 ANSI reaffirmed on September 8, 2006, June 8, 2011 Prev editions: 1988 ASME MFC-9M-1988 (R2011), Measurement of Liquid Flow in Closed Conduits by Weighing Method SC9 ANSI reaffirmed on September 8, 2006, June 8, 2011 Errata issued December 1989 ASME MFC-10M-2000 (R2011), Method for Establishing Installation Effects on Flowmeters ANSI approved October 23, 2000 ANSI reaffirmed on September 8, 2006; June 8, 2011 Prev editions: 1994 SC10

Standards Status Report


as of January 27, 2012
Priority: H = High = PINS submitted. Work on a revision has or should be initiated immediately and final action completed within a year of the PINS submittal; M = Medium = PINS submitted. Work on a revision has or should be initiated within 12 months of PINS submittal; L = Low = Up to date. No action on a revision anticipated for the next 6 months

Document

Resp PINS

MC Ballot

Public Review Period

Board Ballot/ Approval

To TP

Fr TP

To Comte

BSR9

PRIORITY

ASME MFC-11-2006, Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters SC11 ANSI approved July 13, 2006 Prev editions: 1989,2003 BSR-11 submitted expires January 19, 2014 ASME MFC-12M-2006, Measurement of Fluid Flow in Closed Conduits Using Multiport Averaging Pitot Primary Elements ANSI approved March 21, 2006 ASME MFC-13M-2006, Measurement of Fluid Flow in Closed Conduits Tracer Methods ANSI approved September 29, 2006 BSR-11 submitted expires January 19, 2014 ASME MFC-14M-2003 (R2008), Measurement of Fluid Flow Using Small Bore Precision Orifice Meters SC14 ANSI approved February 26, 2003 Reaffirmed March 10, 2008 Errata issued 2001 Prev Editions: 1995, 2001 ASME MFC-15M, Measurement of Fluid Flow in Closed Conduits Velocity Area Method To be merged into ASME MFC-3M L

SC12 Revision 101118

SC13

SC15 New 970715 438

Standards Status Report


as of January 27, 2012
Priority: H = High = PINS submitted. Work on a revision has or should be initiated immediately and final action completed within a year of the PINS submittal; M = Medium = PINS submitted. Work on a revision has or should be initiated within 12 months of PINS submittal; L = Low = Up to date. No action on a revision anticipated for the next 6 months

Document

Resp PINS

MC Ballot

Public Review Period

Board Ballot/ Approval

To TP

Fr TP

To Comte

BSR9

PRIORITY

ASME MFC-16-2007, Measurement of Fluid Flow in Closed Conduits by Means of Electromagnetic Flowmeters ANSI approved April 15, 1995, March 26, 2007 ASME MFC-17M, Measurement of Liquid Flow in Closed Conduits Method Using Liquid Collection in a Volumetric Tank ASME MFC-18M-2001 (R2011), Measurement of Fluid Flow Using Variable Area Meters ANSI approved May 25, 2001 ANSI reaffirmed on March 21, 2006; June 8, 2011 ASME MFC-19G-2007 [Technical Report] Wet Gas Metering ASME approved October 25, 2007 ASME MFC-19G-2007 [Technical Report]

SC16 Rev 436

SC17 New 184

010706 010806

SC18

SC19 Rev

JUN2012 DEVELOPMENT SCHEDULE MFC-20, Point Pitot Methods MFC-21-1, Thermal Mass Meters - Capillary Tube MFC-21.2-2010, Thermal Mass Meters - Dispersion Flowmeters
ANSI Approved: June 24, 2010

DEC2012

DEC2012

DEC2012

NA L M L

SC20 SC21 081129 SC21

Standards Status Report


as of January 27, 2012
Priority: H = High = PINS submitted. Work on a revision has or should be initiated immediately and final action completed within a year of the PINS submittal; M = Medium = PINS submitted. Work on a revision has or should be initiated within 12 months of PINS submittal; L = Low = Up to date. No action on a revision anticipated for the next 6 months

Document

Resp PINS

MC Ballot

Public Review Period

Board Ballot/ Approval

To TP

Fr TP

To Comte

BSR9

PRIORITY

ASME MFC-22-2007, Measurement of Liquid by Turbine Flowmeters SC22 ANSI approved June 8, 2007 BSR-11 submitted expires December 13, 2014 MFC-24G, Guide for Conversion and Metrication MFC-25, In Situ Proving of Meters MFC-26-2011 Bellmouth Inlet Flowmeters ANSI approved March 30, 2011 L

SC24 SC25

L L

SC26

Das könnte Ihnen auch gefallen